235 models
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
Print approx. €12.14–€14.83 excl. taxPreliminary estimate for one variant
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
The Benchbin is as a 3D Printing torture test designed to benchmark the quality, speed and waste of various multi-color 3D printing systems. It can be printed completely without any supports or brim, with the lid and the wheels being a…
Print approx. €12.88–€15.74 excl. taxPreliminary estimate for one variant
With the surge of more advanced and affordable 3D printers, any cheap, average machine can now poop a decent 3D Benchy . That defeats the very purpose of the benchmark, and calls for a new one that can stress the printers again. Also, 3D…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
I did a 5 color 10 h 40 min and 415 filament change test with my MMU. Maybe you will get more changes. Author: Creative Tools Website of the original: https://www.3dbenchy.com/ __________ Ich habe einen 5 Farben 10 h 40 min und 415…
Print approx. €8.61–€10.53 excl. taxPreliminary estimate for one variant
I made these to test whether Z-Hop has any effect on knocking down fragile parts. However I soon realised that these very simple parts are hilariously hard to print. So, give them a go, and post a make if you succeed (or fail!) and maybe,…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
3D print this string art torture test for your 3D printer to make sure it is greatly calibrated!!! This model will make sure your 3D printer can print mid-air bridges, a key for successful string-art prints!!! PRO TIP: DO NOT ENABLE…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Print with 0.1mm layer height to make it easier. If you have stringing problems it's going to look messy. Good luck
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant
If you’re tired of the eternal Benchy and want something different to display on your shelf, here’s a fresh alternative. It’s also a great way to test your printer’s capabilities, including overhangs, bridges, gaps, and stringing. If…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
Push your printer to the next level with the Voronoi Torture test! This all-in-one print tests cooling, print speed, extrusion, bridging, and retraction in one print. Print away! Recommended Settings: 0.1-0.2 mm layer height PLA (Or other…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
Print approx. €11.35–€13.87 excl. taxPreliminary estimate for one variant
UPDATE - I added a second version with the hinges not going all the way through the cubes since this looks a bit nicer, it does print a bit more difficult so I would suggest first print the older version and then the updated version, the…
Print approx. €12.50–€15.28 excl. taxPreliminary estimate for one variant
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
Print approx. €46.27–€56.55 excl. taxPreliminary estimate for one variant
The MMU2s requires some love to get up and running reliably. In order to prevent constant babysitting down the road a proper test is required. Enter the MMUTT - MMU torture test: 1000 tool changes , 5 colors , printing time ca. 20h…
Print approx. €12.70–€15.53 excl. taxPreliminary estimate for one variant
Este test de voladizos se ha realizado después de mucho investigar y gracias a la experiencia aportada por @rudolf Es un test fijo a 75º. La idea de no hacer otro ángulo en este test es porque, cualquier impresora con una ventilación de…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
A 20x20x20mm calibration cube with a couple of different tests built into it. CAD models and Engineering drawings are included for measuring or remix purposes. I was able to get + or - 0.05mm on my stock Prusa mini with Black Inland…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
This torture test is designed to test cooling, overhangs, bridging, retraction, build plate adhesion, and precision. Print with a .4mm nozzle and .2mm layer height. Print speed, retractions, fan speed, temp, that's all up to you. Mine…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
The Tortured Poets Department - Lithophane Taylor Swift made in Lithophane Makers website Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) Scale it as you like :)
Print approx. €5.06–€6.18 excl. taxPreliminary estimate for one variant
This print shows off some of the latest features in PrusaSlicer 2.4 Alpha1 including snug supports, inner and outer brims, fuzzy skin, negative volumes, thin bridges and more. Make sure to download the 3MF to get all the modifiers added…
Print approx. €2.39–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
A great benchmark tool once you've got a million Benchys floating around. Experiment with different settings to get a good, clean print. Polymaker has published some suggested setting changes here . The recommended settings below are…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
I designed this to test prusa and my skill of using slicer.. Can you successfully print this? Print instructions This needs no supports to print.
Print approx. €9.28–€11.34 excl. taxPreliminary estimate for one variant
I wanted to make a model that would be small and easy to find, but also allowing me to test and fine tune my MMU, hence the multi hour benchy! I printed this in a mix of inland and hatchbox PLA, and it took me close to 17 hours to print…
Print approx. €10.77–€13.16 excl. taxPreliminary estimate for one variant
A truly challenging test to verify good first layer adhesion diagonally across the MK3S+ build plate. If any one (1) peices do not stick…the whole print will not work!!!
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
A challenging test print to determine how well your settings are to prevent/reduce stringing.
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
When I first downloaded the original file from Thingiverse, it contained over 50 files, with only one or two being the actual Benchy file. For your convenience, I added only the STL file, a pre-sliced GCODE file, and a photo of the product.
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
your kids favorite super hero or something.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I wanted to test cooling fan performance objectively back to back, so I designed this part to help. Previously I had noticed the AIO micro 3D printer test did a good job of showing up the flaws of a lack of cooling fan, so I modelled a…
Can your printer handle this? Based on the Makers Muse Lattice Cubes, this design is a similar thing in the sense that it is a lattice cube on a base. The super lattice cube is two lattice cubes rotated in on each other, and it makes…
A torture test for your 3D printer. Successful print and assembly earns a trophy! Printing This is an intentionally challenging print. Before attempting, make sure that you have good bed adhesion, filament that won't blob or string, and…
This 3D model serves as a torture test for any 3D printer, assessing its capability to print steep overhangs without supports. Specifically, this model features a 75-degree overhang. It is designed for printing without the need for…
Check out this video from FilamentStories showing the Brolly in action! Made possible by my wonderful Patreon supporters <3 It's amazing what 3D printers can handle! But let's put things to the test with an umbrella that folds and extends…
Articulated Backhoe Loader Extreme Torture test What this tests: Tolerances Thin Walls Overhangs Bridging Bed Adhesion If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
Alternative to everyone's favourite benchy. This little tug floats too so it can also take on abuse in the bathtub. It's also speedier to print and gets to the interesting details faster. This a good way to test your printer for:…
Watch the full video here: https://youtu.be/Ph1zwEaxEB4 I thought it could be fun to take my old Tigger model and slice it for printing on the Palette+. Little did I know, the journey I was about to embark on to get this thing printed.…
A small torture test for printing with soluble supports. The inside of the torus is hollow, but the holes on the surface are quite small. This geometry was created to see how well PVA dissolves in hard to reach cavities. The print in the…
Gift cards are boring. Need a way to make them more exciting while also being obnoxious? This is the model for you! Print 1 of the top files (window or not windowed), 1 of the bottom files, and the spacer. I would only do 1 of the…
Christmas Tree Topper. Hard to print. Torture Test. Category: Decor
I was playing around with a dodecahedron, this is what came out. Not a world class design but quite useful to test the retract and the quality of overhangs. If you like, have also a look at my other models !
You need to have good cooling and a perfectly tuned printer. If you dial in the retraction settings perfectly, you will be impressed how cool it looks. Pro tip: If there is a little bit of stringing a quick blast with a heatgun/hairdrier…
I had problems with the fan shroud, so I needed a directional overhang / curling test. It will test overhang at four angles (30 to 60°) in all directions for curling issues bridging at 30, 50 and 70mm arcs at 2.5, 5 and 7.5mm radius (5,…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
A 3D-printer torture test. Highlights cooling, overhangs, stringing, bed adhesion and more. Please note that this is not an easy print, ensure proper bed adhesion before attempting this. I wanted a model to use while finding the optimal…
This is a display hanger that has more uses than for what it was designed. I designed this hanger to display another of my designs, the Monster Hunters Scoutflies Lantern . But, my wife immediately thought it also was a beautiful hook to…
Did anyone expect this announcement? Certainly not me! As I clown once again from my Reputation (Taylor's Version) speculation, I wanted to recreate the bookmark that will be included with the Vinyl! It's not exactly the same, since I…
Good luck, it's not the easiest of prints. It has a very small footprint, hence a torture test. Looks cool if you succeed! (So far I'm 1 for 2) Suggest 0.2mm layer and some Nano Miner bed adhesion, no supports needed. Cheers!
This is an OpenScad design of the 'torture test' that is often shown in Maker's Muse and other video channels. To change its dimensions click on the Open In Customer button here (you need to be logged in into Thingieverse to see that…
Simple 30x30x30mm cube with some of the common torture tests for a 3D printer. Designed this just to test printer performance and to recalibrate e-steps together. No supports required! Tests: overhang, tolerance, ghosting, bed adhesion.…
This is not a calibration model, it's intended for use once you already have your Pressure Advance (aka Linear Advance) tuned and you are ready to fine tune it with a more advanced challenge. The outer facets are designed to visualize…
Prints well from 100% to 200% Scale Uncheck PrusaSlicer “Detect bridging perimeters”
A simple torture test for ringing for single axis and curve. Fast print and needs not much material. Print with 0 infill
This is a double helix bridging torture test. you can scale it up or down to increase the length of the bridge. you can also filament swap to test bridging capabilities of multiple filaments in one print! designed in fusion 360 featured a…
Use this model to test color changes on the Prusa MMU 2.0. While this model is only 25mm tall, it takes 500 color changes to successfully print it. If your print doesn't make it to completion you can calculate the number of color changes…
This test piece serves as a valuable tool for assessing both soluble supports and PETG-based support techniques for PLA prints. It allows users to experiment with various geometries and configurations to determine the most effective and…
210mm total width. Updated with more useable base legs. Pic is my best shot at it.
This is a torture test for most FDM printers it test over hangs, bridges, stringing and if it can do a circle. Most standard pla setting should do the trick you will want to scale it up in the slicer do not print with supports
@Sebazzz posted a comment in the Evil Gift Card Torture box a list of parameters to use with the “ Nut Job ” project to print nuts, bolts , and washers for the card box. This project simply contains the STL files so that you don't have to…
To properly benchmark how well you can print engineering models, I prepared Engineering torture pieces . These models are bricks with metric holes and metric threaded holes. All holes are present in vertical, 45°, and horizontal…
Bonjour, Voici un test pour paramétrer vos supports. J'ai tenter de faire un modèle permettant de tester un maximum de cas d'utilisation des support tout en ayant un temps d'impression réduit. Vous pourrez ainsi imprimer le modèle avec…
Christmas Tree Decorations that can double as Christmas light covers. Also a very effective torture test for your 3D printer. Holes have been included for strings to attach to your tree, and holes have been provided to fit small Christmas…
Torture test will help determine your printers capability Overhangs, Stringing, Temperature and more. Category: 3D Printing
Some 3d mazes I generated with a script I wrote in Lua! If you've got a dual extrusion PVA setup for supports, then this a challenging torture test for it. I have yet to successfully print this, but it is possible. You can print with PLA…
3d printer torture test that takes a short amount of time This will test small overhangs witht eh letters large overhangs text detail top layer side accuracy 20mm top hight 20mm and the test on the top to see how much detail you can get…
This is a remix of Infinite Torture Cube v2 The clearance between single cubes is only 0.1 in the original design. This make the cubes sometimes stick together, depending on the flow rate you use and the material you print. I decided to…
I still saw multiple weird artifacts in my prints even after dozens of successful retraction tests. To tackle those edge cases I designed this mini retraction torture test with multiple edge cases. On the top of the print you have quite…
This can be a very difficult torture test. It includes a number of different test in it. Start at 50% size Overhang test on the bottom. Span test across the back 60mm Cube size tolerance Multiple circles tolerance Stability printing…
I designed this to test my Ender 3 printer as I was seeing some strange marks in the prints. The shape was made to print in a single line and you can use it as a visual guide to see if your print bed is level. It also proved very good at…
kind of two cubes intersecting a good test for stringing print with low speed, because the vibrations of the printer might cause some problems. it might help to activate minimum Layer time. Category: 3D Printing Tests
I was always dissatisfied with the original handles on the Heroquest torture rack, since they would clearly hit the floor before making a full revolution. When browsing stuff to make with my new 3D printer, I came across Pipoden's…
This model prints bridges of length 1cm, 2.5cm, 5cm, 7.5cm, 10cm, 15cm, and 20cm. While bridging 20cm is challenging, you can play around with various settings and compare the outcome. The two circles ensure proper bed adhesion.
Millennium Falcon for Torture Test remixed from https://www.thingiverse.com/thing:919475 Here you go the timelapse https://youtu.be/-rTa366122Q Find your next target print nere. https://youtu.be/kc3DjEcQK34 Category: Vehicles
The Porta‑Punisher: The Porta‑Punisher is a compact, functional torture test designed to reveal how well your printer handles real‑world geometry under challenging conditions. This tiny porta‑potty features overhangs, bridges, thin walls,…
I do not want to waste so much plastic, so I wanted a short and helpful test for my filament and printer settings. I tried to incorporate every possible common issue I know of, and it uses around half of the time and filament as a Benchy.…
This is a model of an open-cell foam used to research the finite element analysis of foam made from metal. Could be a fun torture test for a printer. Be careful as the one model is a 140MB stl file.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker MK3.5 MMU3 Torture Test. 18hrs and 558 tool [email protected]…
How well can your printer deal with an overhang? This print shows you just far your printer and settings will allow you to overhang before it starts turning to spaghetti. Each arc increments by 10 degrees from 0 to 90. No printing on its…
Do you hate your 3D printer? Do you enjoy subjecting it to overly complex jobs and watching it suffer? Then this is the print for you! This was modeled off of Angus's (Makers Muse) lattice cube and I put my own twist on it. Good luck.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker How good is your printer? Is your printer able to print this…
This is a speed torture test using vase mode for the Bambu Lab P1P, but could be adapted for other 3D printers (STL file included). The 3MF file was created for the Bambu Lab P1P, but it should work for the X1 and X1C if you change the…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker MK4 MMU3 Torture Test. 11.5hrs and 558 tool [email protected]…
This is a torture test for overhang and a fun fidget toy if you succeed. The design came to be when i tried to design a fidget button and realized i could adjust the design to print in place and give your 3d printer a challenge. It…
Overview A simple model for testing multi material printing with PLA, PETG and TPU (or you own selection of filaments). The assembly contains interlocking parts and tiny or zero clearance sections designed to be printed with materials…
This Thing is licensed under the Creative Commons - Attribution - Non-Commercial - ShareAlike license. This means to share with other people you MUST give appropriate credit and a link to this page. YOU MAY NOT SELL this design, and if…
A temp tower I knocked up with temperature markings. The part has the following dimensions 35 x 5 x 5 mm overall 3mm hole through the center 4mm counter-sunk hole with 3x3mm cone with 40 deg included angle 2mm rads under bridge with 10mm…
Test your printer! 5 gear version will be added very soon! stay tuned and show your spinner! Category: Toy & Game Accessories
Lattice torture test and can be printed fast. I printed 75mm/s on my bambu x1 caron. I recommend print with PLA and a enclosure if you have one. The enclosure just insures a cleaner print.
Encore un autre test de torture, mais assez rapide, qui permet d'avoir un visuel sur les overang, strining, retractation, précision, porte a faux etc
If you are too bored, try torturing your 3d printer with this dreaded STL! (overhang test + stringing test)
It's just an updated torture test! It tests overhangs and print quality!
A calibration cube which also coincidentally tortures your Printer. It is my first model i made using F360 so I hope you like it.
A simple overhang test with a noisy surface to simulate organic/3D scan models.
I've been excited to test out new methods of optimizing my CoreOne now that we have new tools and configurations out to really dial the quality in. This is a model that I thought might create a number of different very fine artifacting…
small torture test include: precision test overhang test text test bridging test stringing test hole test remix the part in the hollow square
Update: Optional version: top part of the box now has a recess that holds the key. (see picture). To get that, print “top-.stl” . I created another gift card torture box - inspired by Bobby Thunders design, but slightly different: The Box…
When dialing in settings for printing Tabletop RPG Minifigures on my Prusa Mini+, the most challenging aspect was large features that spend a lot of print time unconnected to the main model, just floating as their own island within the…
