Counting matching models…
A holder for 5 x 12V Bosch batteries. Easily attached to a wall using two screws. Upper layer can be printed using a different color for a nicer finish (see pictures)
Print approx. €9.45–€11.55 excl. taxPreliminary estimate for PETGSource material: PET
Note: This is the version for personal use ! If you want to print these files for other people, see the commercial version ! Update 2024-11-11 I've created another wheel (V3) to counter some issues I've experienced during previous…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
Fix the toroidal inductor with hot glue so that the adapter can withstand vibrations. 2x USB-C Charger PCB with SW3518 Chip: https://de.aliexpress.com/item/4000180424469.html Includes a buck (no boost) converter, so USB-C fast charging…
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
A small carabiner to avoid losing small items. Printing time 4 minutes, filament used 0.18 meters Un piccolo moschettone per non perdere oggetti di piccole dimensioni. Tempo di stampa 4 minuti, filamento usato 0.18 metri
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Based on the idea from elatobi. New design to fit for the GST 18V model and adopted to the rail guide from Makita / Festool as I did not like the Bosch rail guide. It is designed to saw on the side without rubber lip with the jigsaw and…
Print approx. €2.81–€3.43 excl. taxPreliminary estimate for PETGSource material: PET
Schild mit der Aufschrift “Infoschalter für besonders bescheuerte Fragen” Eignet sich zum aufhängen Nur 2 Farbwechsel für den gesamten Druck
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
Print approx. €7.38–€9.02 excl. taxPreliminary estimate for PETGSource material: PET
Made this for my wife's new favorite kitchen toy and since the space in our drawers is somewhat limited and all the existing designs I found are all too big, I came up with this design to organize the cutting discs a bit more space…
Print approx. €11.49–€14.05 excl. taxPreliminary estimate for one variant
Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET
A simple holder to get my Bosch GluePen on the Ikea Skadis. It offers some space for spare 7mm gluesticks as well so that you have everything in one place. It uses one of the universal hooks ( Skadis_Universal_Hook.stl ) from CSD_Salzburg…
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for PETGSource material: PET
Not pretty, but good enough to keep a GluePen at hand on an Ikea Skadis rack without dripping hot glue. You should print the small mount wedge standing vertical on the print plate with some supports (not much required for this little…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant
50x50x2mm 1 color or 3 colors option you do not need MMU for this print with PLA and with supports - enjoy removing them, if you have MMU, make supports with different color PETG and pendant with other color PLA - it is easier for…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
Teller für die Küchenmaschine MUM 2 Bosch.
Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant
Made for Cut the main hole for 8 inch subwoofer with a Bosch GST 150 CE i use a 5mm bolt 40mm long
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Adapter verbindet die BOSCH GEX 18-125 oder GEX 12-125 Exzenterschleifer sicher mit einem HT-Rohr DN50. Einfach aufstecken, um 90° drehen, fertig. Ideal zur effizienten Staubabsaugung in der Werkstatt. This adapter securely…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET
I want to cut ceiling light holes in Drywall with my Bosch GCU18V-30. Bosch doesn't sell one so I designed this to allow me to use the Rotozip Circle Cutting Attachment. Printed 100% Infill with 0.8mm nozzle and 0.3mm layer height. Link…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
The corner routing template can be used to route a corner of a shelf precisely, there there is an extrusion profile is placed. You can use a router bit with a bearing to trace the shape of the template to the shelf. The drilling guide is…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
English text see below Ihr habt einen Kühlschrank der Marken Siemens, Bosch bzw. B/S/H und die Türfächer hängen schief oder lassen sich gar nicht mehr einhängen? Dann ist wahrscheinlich ein nur 1,3 mm dünner Steg im Türeinsatz gebrochen.…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for PETGSource material: PET
We had during summer time a lot off issues because of overheating. So i designed an easy Mounting Fan Housing with 24V DC Fan. Originally that equipment is passivly cooled over Steel Housing. Once printed the cover, I tool a heat gun…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for PETGSource material: PET
Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
This is a simple battery holder for Bosch Professional 18V batteries that you screw on a wall. I tried to use as less filament as possible. It is still interlockable, meaning you can add as many holders that you need next to each other…
This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to…
Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.
I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…
Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…
This is a CAD drawing for Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374.
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 26 March 2023…
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Holder for Bosch 12V battery I edit inside shape (-0.1mm) - some of you had to applied offset...
Some people really like the wheel on the Bosch PBD 40 drill press, others replace it with a traditional 3 axle cross. I got inspired by a different idea by user mbatorowicz over at Thingiverse. He added a knob to the wheel. However there…
This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…
A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…
This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374 in STEP format for those who don't have Fusion 360
A stand for the 12V Bosch Battery, and bit holder for the GSR 12V-15 FC drill. The bit holder may fit other Bosch drills if they have the same rubber band it attaches to. Apparently the bit holder also fits the Bosch GSR 12V-20 brushless…
Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…
Bosch Akku Halterung für 18 Volt. Perfekt um die Akkus ordentlich aufzuräumen in der Werkstatt.
I'm organizing my Bosch 12V power tools on a sheet of plywood on the wall in my workshop. With these 3D printed mounts, I can easily and safely hang my Bosch tools when they are not in use. All the tools hang on their battery socket. It…
Bosch-12V_Battery-holder - No Support There might be a slight variation the the dimensions of the batteries. this model should fit 3A (My 2A batteries have a slightly looser fit)
Battery mount with retainer for the Bosch Green batteries, this is the DIY series from Bosch. This mount does also fits other batteries in the Power For All alliance series. Reupload from Thingiverse. Printing instructions: Layer height:…
Since I couldn't find a really good fitting holder for my Bosch batteries, I drew a holder myself. If you have your slicer settings under control and use a calibrated printer, the Bosch batteries fit into the printed holder with a little…
Bosch PST 650 jigsaw. Makita BO 5030 sander. Makita 9910 sander. Bosch PKS 40 circular saw. 2 mm width. Category: Parts
German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…
I liked the design by Andreas Gohr and changed a few things to my taste: chamfers on the mounts one mount with hex nut trap, so now two different mount pieces exist only 1 mm gap between the mounts that disappears if screwed tight BOM is…
I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…
If you print it upright, you do not need supports (Rotate 90 degrees). The material doesn't matter, but I used PETG. If you don't want to screw into the wall, you can attach the battery holder to the wall with double-sided tape.
I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
Easy to print, nice to use. Remix from Parkside holder. Additional f3d file with parameters which enable you to adjust it for batteries of other make.
Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
This is a dust collector for Bosch angle grinders. The collector simply slides onto the guard. I designed it for a GWS 18V-15, but it should fit all Bosch 125 mm angle grinders with its style of adjustable guard. Ensure the slot for the…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
EXPAND YOUR CORDLESS WORKSHOP TOOLKIT! Check out our other tools: - 100W USB-C Power Bank Adapter — Fast-charge laptops, phones, & gear on the go. - Portable Soldering Station — Cordless soldering station for field repairs & benchtop…
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
Hi there, I would like to share my first design for the BOSCH eBike Battery Charger BPC3400 4A Charger Model No: EB12.110.001 Have fun with it! I used 4x40 screws and 6 dowels When you screw it to the wall, don't overtighten!
It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…
Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…
Different brands of SDS drill bits can have some slight variations in diameter so I remixed Jevermeister's model to accomodate 6x3 mm magnets. I mounted the holders in the L-Boxx using M3 heat inserts. In my L-Boxx the holes don't all…
Skadis hanger for Bosch proffessional pliers fits for all three kinds of Bosch professional pliers although they have different thicknesses at the handles. Printed with PLA 15% filling and support. Version 1.1 with improved hook for…
Différents casiers pour meubler une L-Boxx Bosch taille 102mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…
Bosch 12V battery holder Simple holder for ther 12V Bosch professionel batterys. I was searching for something that protects the batterycontacts. i can't find something that fits my needs or works right out of the printer. So i have to do…
This allows to mount the Bosch FlexiClick Tools on a Board or anywhere else. Theoretically you could make a remix for a pegboard too, but the snap mechanism needs some force to lock in place, so screws are the only valid option to mount…
My wife had a fall damage on her little Bosch KIOX and I thought it could help some bikers to get a protection case. It was a challenge to copy the shape and it took some iterations of the design, but here it is: A formfitting case to…
Print Settings Printer: Prusa Mini+ Nozzle: 0,4mm Layerheight: 0,20mm Infill: 15% (you can add more to make it heavier. However, I stuck it on with double-sided tape, so it wasn't necessary for my purpose to add more infill) Supports: No…
Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…
This allows you to mount SDS Plus drill bits on the lid of your L-Boxx. Tested on a Bosch L-Boxx 136 G4 but it should also fit the older ones. Depending on how well your printer is able to print edges, you may have to force in a drill bit…
A featherboard, suitable for the T-slot of the Bosch 10 XC table saw. Heavily inspired by the design of Zeropage, I modified some dimensions by 0,1mm - 0,3mm since the fit was too lose in the original models
Please be aware the model uses light weight modeling so has at points thin walls of 0.8mm, some users have indicated they had structural issues if they don't have a well calibrated printer. Inspired by AaronOaks model, unfortunately my…
I created a bracket so I can easily fix our bike chargers on the wall in the garage: e-bike charger for a Brose motor (on a Spike Cycle) e-bike charger for a Bosch motor (performance Cx) e-bike charger for Qwic motor (FN7 urban bike)…
Vacuum adapters for Bosch tool shop vacuum cleaner (AdvancedVac20 in my case) - should also work with Bosch Professional vaccum cleaners available for (see pictures): replacement - standard Bosch adapter Makita RT0700 Router adapter…
Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…
Wandhalterung für Werkzeugakku
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
This is a battery attachment for Bosch 12V 2Ah and 3Ah batteries for their power tools. With this you have a stand for your lamp, drill or other power tools. You simply clip it in with some force and can remove it with a flat screwdriver.…
The Bosch L-Boxx Mount is used for installing on a transport dolly and securing the Bosch L-Boxx Storage System on top of it. Print Settings: Perimeter: 4 layers (0.4mm Nozzle) Infill: 40% Gyroid Layer Height: 0.2mm Support: Support on…
Druck am besten mit PETG. Die Akkus werden eingeclipt und halten daher auch hängend.
Bosch Professional 18V Power Tool Holder
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
Im introducing the baseplate for gridfinity system for BOSCH L-BOXX 136 boxes. I minimized the edges so I could fit as much grid as possible (7x9). It also contains space for 6x1mm magnets. The baseplate is designed to be glued to L-BOXX…
Logos for Ridgid, Craftsman, DeWalt, and Bosch Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
I designed this miter bar because the one included with the saw has too much play. The aluminium miter slot is 21mm (when new) but will wear down with use and it will wear more at the front than the back. Instructions: Print the test…
100prznt https://www.printables.com/model/76938-bosch-144-and-18-v-battery-mount A remix of this excellent model from 100prznt - just using less material.
I had a need for a portable power source for another project - as I had a couple of the (green) Bosch tools made this adapter so I could repurpose the batteries and chargers. The print is in two parts. I printed mine in PLA which seems to…
I remixed this random orbital sander wall mount so that it fits my corded 5 inch random orbital bosch sander. The mounting holes have also been changed, so that it can be mounted with only two screws into a single wall stud. ☕ Enjoying…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
This adapter fits on the Bosch GKS 18V-57 circular saw. It slides over the back and then attaches with a screw on the front. So it won't come of the saw. If you wan't to use the screw on the front of the saw to attach the adapter you need…
Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.
Stylish holder for Bosch electric drill/screwdriver PSR 18 LI-2. ### Update 19.09.23 - Version 2 Increased thickness for more longevity No more screws and nuts are required, only two empty inserts (attached to this model) Additional hooks…
Bosch 18V battery holder Simple holder for ther 18V Bosch professionel batterys. Nice fit right out of the printer with a satisfying snap when you insert the battery. Printing: I printed the model on a ELEGOO Neptune 2s, with PLA…
Hi, this is set of screws and nuts, screwdriver and plate. The set is compatible with Bosch Tool Box for kids. Recomended printer settings is 0.16mm layer high and 20% infill density. Do you like this model please check my Formula 1 Race…
This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…
Featherboard für die Bosch GTS 635-216 Tischkreissäge. Ein langes Featherboard mit Nutensteinen und Kreuzgriffschrauben für M6 Schrauben + Muttern. Featherboard for Bosch GTS 635-216 table saw. A long featherboard with sliding blocks and…
Since I couldn't find a really good fitting holder for my Bosch batteries, I drew a holder myself. If you have your slicer settings under control and use a calibrated printer, the Bosch batteries fit into the printed holder with a little…
![Bosch Indego S500 rear wheels V1 [personal use]](https://media.printables.com/media/prints/262266/images/2341224_aa5cc481-3db9-4bf3-88bd-520463c2462d/img_7759.jpg)
