Search results: ots

Sort order

Counting matching models…

P
PrintablesFloatingCam

Miraculous Ladybug - "Spots-on"

Ladybug gets her "Spots-on" and stands on her own in a natural pose. A fun, well balanced model that demonstrates how modifiers can be used. Print instructions The .3mf has all of the STLs setup in the proper order. I labeled the STL…

Print approx. €14.17–€17.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,147
Likes
79
Rating
4.5
P
PrintablesAlgernon

Airbrush stencil ST-CAM002-luftwaffe-WWII-spots-camo-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
828
Likes
136
Rating
5
P
PrintablesLudo B

Bootschroef met 4 bladen, boat screw with 4 blades,

Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 4 bladen. Due to the success of my boat propeller with three blades, I also made one with 4 blades.

Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant

Downloads
509
Likes
30
Rating
0
P
PrintablesLudo B

Linkse bootschroef met 4 bladen. Left hand boat propeller with 4 blades

In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo

Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
15
Rating
0
P
PrintablesGilles

Brush pot 28 slots (version with and without Ikea Skådis stand) - Pot pour pinceaux 28 slots (version avec et sans support Ikea Skådis)

[En] To make it easier to store my many brushes and save time finding the right one, I've created a pot to hold 28 miniature painting brushes. There's a model to put on a table and another to fix on the Ikea Skådis pegboard. I reused the…

Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant

Downloads
366
Likes
45
Rating
5
P
PrintablesJoe

Footswitch Barefoot Topper / Caps (for Fractal Audio FM3, FM9, FC6)

These are footswitch topper for your Fractal Audio Modeller. They provide a tight fit and make it much more convenient to use your device barefoot or to switch presets with your hands. ---- Did you like my print? If yes please rate it ❤️…

Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
32
Rating
5
P
PrintablesMatt Cooper

Breakable Pots for Zelda Ocarina of Time 40th Anniversary

I've created a handful of breakable pot designs: Two (simple and patterned) versions inspired by pot designs in The Legend of Zelda: Ocarina of Time for Nintendo Switch 2 One (retro) version inspired by the pot design in The Legend of…

Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant

Downloads
252
Likes
285
Rating
5
P
PrintablesThommyfix

Mini flower pots for seeds or succulents

The pots (4,5*4cm) can be printed with PLA or PETG without support. If you print the pots with different colors and patterns you still know what was planted in each pot. The new paint function of the Prusa Slicer is very useful to colour…

Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
37
Rating
5
P
PrintablesLukas

Clip-in Net Pots

I often encountered the problem that I had to cut open my net pots when I wanted to transfer or harvest plants (see picture below) in my hydroponic system. Therefore I have designed a few net pots that can be opened and closed in order to…

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
209
Likes
35
Rating
5
P
Printablesbene

Honeycomb Pots (2 configurations)

A cool-looking, but also practical print - That's what I wanted to design to take part at the Pursa-Gardening-Contest. So I came up with this idea. A honeycomb pot-design, which can be configured in two ways: You can place one group…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
204
Likes
103
Rating
5
P
PrintablesTweel

Christmas Trees with Glowing Dots for LED Candles / Tannen mit Lichtpunkten

🌲 English below, Deutsch weiter unten 🌲 The same slightly asymmetric trees as my vase mode set, now with little round holes. Printed with 3 walls, the light shines mostly through the dots, like tiny lights in the snow. ✨ Trees: small 6 ×…

Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
26
Rating
0
P
PrintablesOT

Bootshaken Boat hook Original

Der Haken wurde nach einer Bildvorlage designed und wurde noch nicht getestet. Schreibt mir bitte falls Durchmesser oder Bohrungen angepasst werden sollten. Zu drucken in PET oder stärker!

Print approx. €2.87–€3.51 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
135
Likes
18
Rating
0
P
Printablesdrofmij

V3 - 1590a ish for diy guitar effects with jacks and footswitch holes

V3 - replaced the pegs and holes style connectors with semi-spherical connectors around the lid (see new pictures). Printed with prusa mini and connection is pretty solid. I added a small slot at one end of the lid to pry it case you need…

Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
16
Rating
0
P
PrintablesCity

10-24 Nut cropped to fit 1/8 inch slots

I liked SmilingImpact's 10-24 bolt and nut design but needed a nut short enough to fit 1/8 inch (roughly 3.5mm) nut slots. This nut remix is made to be 3mm tall so it fits easily into slotted parts. From testing, 0.1mm layer height is…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
4
Rating
5
P
PrintablesMatt

Tottenham Hotspur Keg Tap Handle

Tottenham Hotspur cockerel emblem made into a keg tap handle. For use with a threaded insert (sold seperately) that matches your tap assembly. Print instructions Category: Hobby Summary Tottenham Hotspur cockerel emblem made into a keg…

Print approx. €8.81–€10.77 excl. taxPreliminary estimate for one variant

Downloads
68
Likes
6
Rating
0
P
PrintablesMitchelangelo

Flower Pots and Molds - "Whole Pieces"

These two flower pots were made for each other. You can print the pots themselves, or you can print the molds. If you print the molds, use a flexible material or a material you can make pliable enough to pull out the casted pot. I casted…

Print approx. €11.99–€14.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
63
Likes
14
Rating
0

Oral-B Brush Head Holder (4 Slots) | Soporte para cabezales de cepillo Oral-B (4 cabezales)

[English] Holder for four Oral-B or compatible electric toothbrush heads. The base has a diameter of 60 mm, providing good stability. Each slot for the brush heads is rectangular, measuring 6.8 x 3.5 mm with a height of 14.8 mm, ensuring…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
4
Rating
0
P
PrintablesKeetah

16-segment display nametag (with dots)

A name tag for your lanyard that features 18 7-segment “displays” that you can colour in yourself! 16-segment display // symbols, numbers and latin alphabet (source: https://www.partsnotincluded.com/segmented-led-display-ascii-library/ )

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for one variant

Downloads
50
Likes
8
Rating
0
P
Printableseof

Multicolour Coaster for Flowerpots / Mehrfarbiger Blumentopfuntersetzer

No MMU required. Some M600 Filaint Change instructions in gcode. Diameter is 140 mm, you can scale it in the slicer. If you slice it by yourself, necessary change filament instructions (M600) must be added at the preferred layer. See also…

Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
4
Rating
0
P
PrintablesSquawk

Bambu Build Plate Holder with 14 tapered slots & tongue.

This is a remake of Debren27's awesome model: https://www.printables.com/model/304326-bambu-build-plate-holder-with-2-8-tapered-slots-op I completely redrew it, but all dimensions except for the width to hold more build plates of course…

Print approx. €17.51–€21.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
3
Rating
0
P
PrintablesBGDglider

Snap-Fit Charging Stand for MG5720 with Attachment Slots – TrimDock

Overview This custom-designed stand is made specifically for the Philips MG5720 Multigroom trimmer. It offers a neat and elegant storage solution while integrating the charger directly into the base. Just slide your trimmer into place –…

Print approx. €6.53–€7.98 excl. taxPreliminary estimate for one variant

Downloads
40
Likes
18
Rating
5
P
PrintablesJeyMco

Frosthaven initiative tracker (6 slots)

Based on the Frosthaven initative tracker from Thingiverse by jojobao. I made my own version. Economical print with 6 slots (half of the original and slimmer); this way you only need one with tracker e.g. 4 monster types and 2 players;…

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
2
Rating
0
P
PrintablesLucianociri

Nozzle Holder for Yihua 4 Slots estación de aire caliente

[EN] You can find the description in English below. Soporte diseñado para organizar y tener siempre a mano las boquillas de la estación de aire caliente Yihua 858D. Se instala fácilmente en el lateral de la carcasa mediante 2 tornillos…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
8
Rating
5
P
PrintablesMichaelQ

Original Prusa Enclosure (OPE) - Vent Hole Slots Cover

As BuildX has already explained about his model, the slots for a fan in the back panel are quite a hole that should be closed. Especially if you want to print with ABS or ASA, keep the temperature as stable as possible and filter the…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
2
Rating
0
P
PrintablesHD_Creator

Glider pilots hygienic drinking valve cover

This thing provides a hygienic cover around your hydration bladder mouthpiece, which can be easily opened and closed with one hand and is especially useful for single pilots when flying gliders. It is held closed by two little magnets and…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
24
Likes
4
Rating
0
P
PrintablesNina Máčová

Coaster: Deep roots lasts

Easy to print in PLA or PETG.

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant

Downloads
15
Likes
3
Rating
0
P
PrintablesPeliX3D

BB Gun | 4 Shots | built in magazine

31.12.2024 Version 3 is now available! It features an 8-round magazine, stronger spring, easier printing of bridges, stronger lever! Check it out here: https://makerworld.com/en/models/934485#profileId-899040 Version 2.0 is released!…

Downloads
13,566
Likes
3,202
Rating
4.51
P
PrintablesWhity

Rugged Box with Modular Slots (Parametric) - Shallow height

The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…

Downloads
9,389
Likes
2,425
Rating
4.97
P
Printableskev

IKEA 365+ Lid Holder / Deckelhalter - 10 Slots

Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required

Downloads
9,068
Likes
3,316
Rating
4.97
P
PrintablesMany24

Brush holder 6 slots

This is an update of my original model Brush holder od autora Many24 | Stáhnou STL model zdarma | Printables.com It keeps the same simple and minimalist design, and adds double the slots for the brushes. Print instructions Printed in PLA,…

Downloads
7,101
Likes
2,397
Rating
4.96
P
PrintablesWhity

Rugged Box with Modular Slots (Parametric) - Normal height

The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…

Downloads
5,930
Likes
1,184
Rating
4.95
P
Printableshxp3d.pl

Hexagonum flower pots with tealight

Set of Hexagonum flower pots - 3 sizes S/M/L) with tealight. Pot sizes: small - 59.94mm height medium - 79.98mm height large - 104.84mm height Tealight size is 31.17mm Pots have a closed bottom. No special instructions to print. However…

Downloads
5,919
Likes
2,082
Rating
4.87
P
PrintablesLucaDilo

Spring Gun V2 - Shoots fake bullets with magazine

Spring Gun V2 - Shoots fake bullets with magazine Spring gun v2 can fire multiple bullets one at a time thanks to the new magazine system. Reading the comments and advice from users, I designed version 2 of the spring gun. The new version…

Downloads
5,689
Likes
1,031
Rating
3.93
P
PrintablesRoostaff

Vrai Piège à Frelons original à visser Nutella, Le Parfait, Bonne Maman bocaux ou pots avec antipluie suspendable/ Real Screw original Wasp Hornet Trap Nutella,Le Parfait, Bonne Maman jars with anti rain hat suspension

Maj 30/06/24 : https://www.printables.com/model/927111-anti-pluie-piege-anti-frelon addition test piece anti rain hat suspension Part to test because no more printer working at the moment... fixing with petg wire as attachement Thanks in…

Downloads
5,293
Likes
429
Rating
4.97
P
PrintablesHumble Studio

Dummy 13 Boots - BETA & V1.0

How do you improve upon a near perfect dummy 13 model ? . . . BOOTS !! theses boots wont distract from any look you're trying to create for your dummy 13. low profile, maintaining normal articulation and ohhh so cool :) Boots are a snug…

Downloads
4,651
Likes
1,182
Rating
4.96
P
Printablesbigovereasy

Mini Big Red Boots

This is the Smooth Sole Version. Added Mini Big Boot Box 🥴 print in place, no supports for Thing ✌: https://www.printables.com/model/564760-thing-in-red-boots-pencil-holder Do you want to sell prints of my designs, get all my designs for…

Downloads
4,615
Likes
333
Rating
4.8
P
Printablesluc.e

Succulent Plant Pots

Just a few small succulent planters. I have added the source file for you to be creative. The football might need some support based on your printer's capabilities. Print instructions Unassociated tags: plant pot Category: Decor

Downloads
4,595
Likes
1,215
Rating
4.98
P
PrintablesLucaDilo

Spring Gun - Shoots fake bullets and poop

Spring Gun - Shoots fake bullets and poop Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. I had to make several attempts to find the right ratio of spring length to spring…

Downloads
4,364
Likes
620
Rating
3.56
P
Printablesprntmkr

Fidget Cone - Easy print, lots of fun! :-)

Intro A nice twisted fidget toy… This one was designed not to pass through but to be able to stick together. Why you'll love it? Easy print… Sooo nice gadgety :-) Recommended print settings Nozzle: 0.4 Layers: 0.2 Infill: 0% (yes, 0%)…

Downloads
4,058
Likes
395
Rating
4
P
PrintablesWhity

Rugged Box with Modular Slots (Parametric) - Shallow height (multi row version)

The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…

Downloads
3,751
Likes
922
Rating
5
P
Printablesdebren27

Bambu Build Plate Holder with 2-8 tapered slots, open infill, optional tongue

Also available on MakerWorld! Model 41379. Come join the party! UPDATE November 27, 2025: I have confirmed that scaling the model to 129% on X works for H2C build plates. Scale it before rotating it to fit. You can also just use the same…

Downloads
3,727
Likes
419
Rating
4.97
P
PrintablesEngiGear

T-Slots Collection

Printing small models is recommended with a smaller nozzle. If you can't find something you are looking for (slots/nuts/bolts) comment and I may make them. I apologize for the massive size of the files I don't know how to compress them so…

Downloads
3,341
Likes
3,670
Rating
5
P
Printablesthall72

Lego Compatible (2780.dat) Technic Pin with Friction and Slots

This model is compatible with the lego system.

Downloads
3,064
Likes
212
Rating
5
P
Printablesvan1ty

Hexagon tree wall art with planter pots and shelf

The hexagon tree wall art with planter pots and shelf. The pots size is 80x80x80 with drip tray. The shelf for pots can be mounted with screws, but I used strong double-sided tape and it holds very strongly.

Downloads
3,038
Likes
1,313
Rating
5
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Downloads
2,871
Likes
553
Rating
4.9
P
PrintablesAaron W

Zelda Bokoblin Chest With Nintendo Switch Cartridge Slots

Remix of the Bokoblin Chest with slots for 10 Nintendo Switch game cartridges

Downloads
2,597
Likes
704
Rating
4.96
P
PrintablesLudo B

schroef, propeller, hélice. Bootschroef. Hélice de barco. Hélice de bateau. Boat propeller.

Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.

Downloads
2,534
Likes
117
Rating
5

Instruments organizer for Flashforge Adventurer 5M Pro with slots for 1/2/3 nozzles (Updated with more nozzles slots!)

I have made this model to get all instruments following with FF ADV5M PRO: side cutter, screwdriver, Allen wrenches, glue stick, grease, nozzle cleaning pin, extra hot-end/nozzle assembly and USB stick, also a place for the printable…

Downloads
2,385
Likes
255
Rating
5

Death Puss in boots - Puss in boots 2 - Fan Art

Death Puss in boots - Puss in boots 2 - Fan Art If you like my work find more here - https://www.myminifactory.com/users/printedobsession if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession…

Downloads
2,384
Likes
522
Rating
5
P
PrintablesDaniel Manjón

DUMMY 13- Militar boots

Hice una combinación de estos dos archivos (DUMMY 13 Figura articulada imprimible + DUMMY 13 - v2 - Botines de tacón alto demasiado realistas) para crear un par de zapatos más tácticos o militares.

Downloads
2,257
Likes
619
Rating
5

Puss in Boots - Shrek - Fan Art

Puss in Boots - Shrek - Fan Art If you like my work find more here - https://www.myminifactory.com/users/printedobsession if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession want to know more…

Downloads
2,252
Likes
403
Rating
5
P
Printablesspearmountain

12 Gauge Shotshell Pack replicas and snap caps

A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…

Downloads
2,194
Likes
144
Rating
5
P
PrintablesHP Robots Otto

HP Robots | Otto Starter

Build and program a cute, modular robot that makes learning technology fun and accessible. With Otto, anyone can explore creative design, 3D printing, mechanics, electronics, engineering, and coding—no prior experience needed. Expand its…

Downloads
2,160
Likes
166
Rating
5
P
Printablescreativityrules

Bambu Lab Tool Box Customized Slots

In the original model there were several wall protrusions that I fixed, and I changed the number of hot ends (4x) and slots. I printed with 0.2 layer height, 2x walls, 4x bottom, 4x top, with 15% gyroid infill using Inland PLA Tough. Let…

Downloads
2,045
Likes
388
Rating
4.95
P
PrintablesAMPERAGE

12 Gauge Shotgun Shotshell Holder (Matchsaver) - M-Lok Compatible

Simple, single 12 gague shotshell holder to give sporting shooters that one last round to complete a stage (when you miss that last critical shot - we've all done it!). This is a remix based on glompos21 design on Thingiverse. I've…

Downloads
2,007
Likes
258
Rating
5
P
PrintablesJackson

Rubber band gun, 6 shots.

rubber band gun. 6 shots.

Downloads
1,996
Likes
531
Rating
1
P
Printablesthudbuzz

Plant Pots / Planters

A place to hold all my planter / plant pot designs, I'll keep this repo updated with any new ones I make. Each design has three versions, a pot with a drainage hole, a pot without a drainage hole, and a completely solid version. The solid…

Downloads
1,925
Likes
391
Rating
5
P
Printableskth0

MSCHF Big Red Boots

I don't know much about fashion, but I've been told these Big Red Boots are the pinnacle of fine footwear fashion. Since the real ones are expensive, here's a slightly smaller pair that you can print to try them out first.

Downloads
1,911
Likes
113
Rating
4.92
P
Printableswiste95

Cooking Mix Sachet Kitchen Organizer – 8 Slots

Keep your kitchen tidy with this remixed, larger organizer – perfect for cooking mix packets like Knorr Fix , Maggi Fix , and other seasoning or sauce sachets. 🍝🌿 🧱 The insert features 8 compartments: • 5 standard-depth slots • 3 deeper…

Downloads
1,831
Likes
564
Rating
5
P
PrintablesSebastian

Rubber band gun (6 shots)

Since I always get asked if I 3d print guns... I decided to design a rubber band gun (for Anna). You need: 8 times M4x10 screws 2mm diameter metal pins: (or 2mm thick nails) 3 times 25mm long 2 times 10mm long Download the barrel from:…

Downloads
1,701
Likes
395
Rating
4.89
P
PrintablesBucio.Boi

Kogatana Hitotsuki (Cross Sword) Dracule Mihawk One-Piece

Become the greatest swordsman, Dracule Mihawk with this quick and easy print! Requires: 1x Blade 1x Sheath 1x Handle Recommend print all parts vertically 2-4 walls 20-30%infill When assembling, apply light heat to the sheath, ensuring…

Downloads
1,563
Likes
192
Rating
5
P
PrintablesAndreas G

Collection of Flowerpots/Inner Plant Pots in various dimensions

Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…

Downloads
1,499
Likes
319
Rating
5
P
PrintablesPrint-Head

SMALLER Organizer for USB cables & chargers EU/US/UK - 5 slots | REMIX

SMALLER Organizer for USB cables and chargers - 5 slots | REMIX 5 slots instead of 10 | +1.5cm-version | rounded edges | EU/US/UK Charger versions note: Reduced the slots from 10 to 5 and rounded some edges. Also there is an additional…

Downloads
1,470
Likes
553
Rating
5
P
PrintablesNigel Johnson

Stackable pill pots V2

I have taken on board some of the feedback that made the original less than ideal and provide a V2. The improvements are: thinner walls - more space inside text prints better not indented the sharpness of the rough edges reduced Smooth…

Downloads
1,432
Likes
271
Rating
4.84
P
Printablesearlmckay

SONY NP-FZ100 Battery Holder (1-5 slots)

I strongly recommend printing the model horizontally to give the snap lock more stability and durability. Feel free to support my work and leave a tip.

Downloads
1,419
Likes
123
Rating
4.86
P
PrintablesPanikraum

Bonsai pots + coasters

The pots can be printed upright with support. I suggest using PETG for better reliability, but PLA will work too. Visible and invisible coasters are included. The invisible coasters are designed to fit under the pot in between the legs of…

Downloads
1,416
Likes
280
Rating
5
P
PrintablesAlejandraR57

Spotify Keychain with Artist Name (Multiple Artists), Camila Cabello, Katy Perry, Taylor Swift, Bad Bunny, The Weeknd, Lana Del Rey, Morat, BTS, Jesse & Joy, One Direction, Peso Pluma, Metallica, 21 Pilots, Olivia Rodrigo,THE 1975, etc.

Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…

Downloads
1,371
Likes
148
Rating
5
P
Printablesdr.dentz

Roomba ramp - Ramp for vacuum robots

I have some height differences between the rooms in my apartment. Therefore I needed some ramps for my vacuum robot to get from one room to the other. One ramp segment has a height of 2 cm. You can also scale it in your slicer to fit your…

Downloads
1,347
Likes
125
Rating
4.5

Articulated T.A.R.S, C.A.S.E, K.I.P.P, and P.L.E.X Interstellar print in place robots.

Your very own articulated T.A.R.S. and friends. Separate files for the four Interstellar robots including T.A.R.S. C.A.S.E. K.I.P.P. and P.L.E.X. measuring at ~80mm x ~120mm x ~20mm Easy print in place with no supports needed. I recommend…

Downloads
1,273
Likes
649
Rating
4.91

Twisted Flower Pots

Easy To print and nice to look!

Downloads
1,262
Likes
229
Rating
5
P
PrintablesEpic Drew16

war robots

Recently, I stumbled upon a few 3D designs of combat robots that caught my attention. I have been exploring this area for a while now, and these designs seem to be quite impressive. I am contemplating investing further in this endeavor if…

Downloads
1,210
Likes
111
Rating
5
P
PrintablesPLab

Bambu Build Plate Holder with 3 slots For P1S

Follow the original instruction with my STL or use the 3mf to print it

Downloads
1,180
Likes
149
Rating
5
P
PrintablesTabjo

308 Bullet Quiver for M-LOK Slots

Bullet quiver that holds two extra 308 cartridges to the side of your rifle. I designed mine to fit the side of my KRG Bravo chassis screw locations, however these will fit standard m-lok slots using t-nuts similar to what can be…

Downloads
1,140
Likes
146
Rating
4.71
P
PrintablesLorenzo Codena

Helical Self Watering Pots with draining holes

ENG: This pot can be used both as a self watering pot and as a classic pot with draining holes but with a modern design cover pot, since the bottom of the internal pot doesn't touch the one of the cover and allows the water to drain,…

Downloads
1,134
Likes
180
Rating
5
P
Printablesar3Dprints

New England Patriots Logo

Color change is as follows navy blue, red, gray, white.

Downloads
1,113
Likes
40
Rating
4.5
P
PrintablesTheCenda

Fujifilm X hotshoe cover

Hotshoe cover with Fuji X logo. Measured and tested on my X-T20, but should fit practically any hotshoe on any camera.

Downloads
1,098
Likes
105
Rating
5
P
PrintablesTrilobyte3D

Cat and Dog Pots (Self-Watering for Plants)

A cat and dog to hold your little plant buddies. There's 3 different faces for each. Don't stare at the butthole too much. These have a self-watering feature. Use the included watering can or other pouring device and add water through…

Downloads
1,061
Likes
334
Rating
5
P
PrintablesNigel Johnson

Stacking pill pots

NOTE: Now Version 2 exists which are a bit easier on the filament and fingys. Take tablets every day, need a way to remember which days you've taken? I've gotcha! Print instructions These are the original stacking pots I made, and they…

Downloads
1,042
Likes
225
Rating
4.89
P
PrintablesIndustrialJones

Dummy 13 Magnet Boots

Wanted some magnets that work with the 100% model and I like the style of the original. Even on their own without magnets is a good look. Makes the feet look more like sneakers. Doesn't really stick to walls as well as the scaled up…

Downloads
1,028
Likes
381
Rating
5

Kobold Pots & Pans

Support me on Patreon! https://www.patreon.com/printedencounter

Downloads
1,020
Likes
162
Rating
4.88
P
PrintablesMoritz

Trash Bag Dispenser / Holder with openConnect slots for openGrid

This simple trash bag dispenser is designed to seamlessly integrate with the openGrid system using openConnect slots for mounting. The default diameter of 54 mm is chosen to leave a small gap between adjacent dispensers when mounted side…

Downloads
1,006
Likes
637
Rating
5
P
PrintablesVieWoy

Boulder magnetic hands and boots for Dummy 13

Boulder hands and light boots with magnet D5x2 mm. Dummy can easly now climb on a fridge! Only one magnet can hold whole figure! If you like my projects, you can support me here: https://www.buymeacoffee.com/viewoy

Downloads
1,005
Likes
295
Rating
5
P
PrintablesBravehartk2

Raspberry Pi Night Vision Camera Mount (incl. Infrared spots)

Camera Mount I build this mount to attach this Raspberry Pi Infrared Night Vision Camera with infrared spots to a flat surface (an existing pi case in my case). The pi camera should have been adjustable (direction / angle). I used some…

Downloads
998
Likes
86
Rating
4.5
P
Printablesromcoromcoromco

PSA graded TCG spots cards wall holder and display frame

Make your collection visible New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display PSA graded TCG spots cards wall holder and display frame.

Downloads
978
Likes
208
Rating
4.75
P
PrintablesDanLab

Customizable Self-Watering Planter Insert for round pots - Source included

I wanted a self-watering planter that I could insert in my various ceramic/plastic pots and would be fast, easy and economical to print. You can use this insert in pots you already have. Using the attached Fusion 360 file, change the…

Downloads
955
Likes
370
Rating
4.87
P
PrintablesDrLex
18+

The source marked this model as adult content.

Downloads
914
Likes
182
Rating
4.89
P

JetKVM 10-inch rack mount - With Keystone slots

A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…

Downloads
901
Likes
110
Rating
5
P
PrintablesHermann S

Lenovo Tiny 10 inch Rackmount with Keystone slots

Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…

Downloads
881
Likes
120
Rating
4.44
P
Printablesnahojjjen

owo pots

A collection of owo themed pots. For smol succulents. On my printer it took 3 hours 30 minutes with 60g of fillament to print. If you use supports I recommend you exclude the face, as removing supports from the thin lines can be difficult…

Downloads
869
Likes
240
Rating
4.67
P
Printableskaitain

Cowboy Boots Pen Holder

There are 4 different cowboy boots made with AI. I touched-up some blemishes. You can use them just as deco pieces or as pen holders in the office. Fun detailed prints. I did not find too many cowboy boots of that sort around. Enjoy

Downloads
868
Likes
84
Rating
5

Utility for training basic sailing knots

According to the manual, kids will model simple mooring cleat, which will help them to learn how to tie cleat hitch. After printing, mooring cleat can be screwed to the wooden base with two screews.

Downloads
857
Likes
167
Rating
5
P
PrintablesMakerMeik

ESP32-Presense - ESP32-Devkit case with ventilation slots

This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…

Downloads
854
Likes
74
Rating
4.88
P
PrintablesAllan Krüger

PS5 Slim Digital Vertical Stand with storage slots

Vertical stand for the PS5 Slim Digital Version with slots to store the small plastic supports and screw plug. As stated in the original model page, the following hardware is required: M3 x 12 (tested) or M3 x 14 (tested)

Downloads
838
Likes
54
Rating
4.75
P
Printablesblove

5 and 6 inch custom Orchid Pots

Orchids in nature tend to grow on the branches of trees. As a result, they need light and oxygen around the roots. Most store-bought planters don't provide the correct environment, and plant health suffers. I designed these pots to…

Downloads
836
Likes
135
Rating
5
P
Printableskhyams

RAM Storage Tray for Laptop RAM 16 Slots (DDR3 & DDR4)

After printing yourunwelcome's nice design for full-sized DIMMS, I modified the design to accommodate SODIMM, laptop RAM. DDR3 and DDR4 are different widths so I made it half and half. If you print two to use one as a lid, make sure you…

Downloads
824
Likes
93
Rating
4.89
P
Printablesbr4in

ExtrusionAl Covers for 3030 T-Slots

This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…

Downloads
817
Likes
142
Rating
4.96
P
PrintablesJáchym Müller

Parametric flower pots

Collection of parametric flower pots. In attached 3dm and gh files you can change the parameters to whatever you want and make your own flowerpotsin different shapes and sizes.

Downloads
809
Likes
87
Rating
5
P
PrintablesSteveJohnsen

Center Marker Finder / Gauge / Template, 90 & 45 Degree Square & Protractor, for Dowels, Square Stock, etc. - UPDATED: 6 Slots Widths

UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…

Downloads
794
Likes
117
Rating
4.73
P
Printables3D E

Anakin Skywalker ROTS Lightsaber

The second lightsaber wielded Jedi Knight Anakin Skywalker during the time of The Clone Wars when he fell to the dark side. This is Anakin's lightsaber as it is seen in Episode III: Revenge of the Sith. The parts in the folders are parts…

Downloads
792
Likes
156
Rating
5
P
Printableshabitaritus

Net Pots and Holder for e.g. Hydroponic

I designed two net pots and a holder for the 5cm pot. The net pots are 5cm and 7cm wide at the bottom. The holder fits on DN110 pipe. Each part is in profile on an extra build plate. I printed and tested the profile on a P1S. I would be…

Downloads
778
Likes
57
Rating
0