Counting matching models…
This is a bottle cap with a watering nozzle. The cap should fit any regular PET plastic bottle. The nozzle is angled by 60° to make it easier to use. Printing instructions: Use a printing sheet with a smooth surface (to avoid leaking).…
Stackable Bottle Drying Rack This simple and practical bottle drying rack features a sturdy square design for stability and efficient drying. Its stackable design saves space and allows for easy expansion when needed. The hollow structure…
An interactive robot that anyone can make! Otto walks, dances, makes sounds, avoids obstacles, you can code on your own and even customize, it is completely open source, Arduino compatible and 3D printable. Features 💻 Programmable with…
Another one-handed bottle opener? Yes, but wait, there's more to it! Update June 2023 I got several reports from people that their print broke. Also not every slicer has the hexagon infill. This was bothering and I was searching for a way…
🔮 Welcome to the Wizarding World🦉 We have updated & improved this original model to have better detail & to make it easier to print. Improvements include elimination of overhangs, simulation of brickwork, masonry and shingles, hollowness…
Simple holder for Cotton pads and tips I also made Makeup brushes and sponge container in similar style
A Christmas Update | V4 is Here! 🎄 12/09/2024 This update marks the final version of my iPhone Standby Dock Remix, and I couldn’t be prouder to share it with you all. Creating this has been a monumental task—I went through and completely…
Update 1 - 17th October 2023: Thanks for the feedback and the great prints everybody! :) As expected some printers have troubles with connecting two stacks together, especially when they are not calibrated enough. I added a small chamber…
Introduction Wasn't happy with the selection of water spikes out there so decided to create my own to fit whatever needs you may have! And while you're at it why not have it double as a plant label! This spike can be printed in as little…
You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The width is defined by spacers which are put under the blade. The PET strip can be then used in machine which converts it to filament for 3D…
Octopus Wine Bottle Holder 1 Color AMS, MMU or, ACE Pro PLA Basic Purple Bambu Labs .3mf Included Commercial License Available For commercial use: https://www.patreon.com/c/atro3dprints/membership Special Thanks to PCBWay! This project is…
It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…
I liked the model of the Hogwarts castle a lot, but wasn't able to slice it due to net errors. By repairing it with blender I used the chance and added multiple languages for the sign. If you miss your language or I made some mistake…
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…
Wands of: Ron Weasley, Hermione Granger, Lord Voldemort, Severus Snape, Harry Potter, & Albus Dumbledore from the movies, books and TV. For non-Bambu users you might have to rotate these more to fit your bed. Tree Supports on build plate…
Reposted from MakerWorld: For this Harry Potter Wizard Chess set, I took the original chess pieces and made just a minor modifications to the pieces themselves: Increased thickness of Queen's staff to help it print better Increased…
For Harry Potter Fans! Platform 9 3/4 sign. V1 : Simple sign V2 : Thicker to print it in 2 colors Let me know if you need modification or etc. Have fun!
The print requires no supports and consists of only two parts. Simply snap the hook into the wasp trap. Pour water mixed with sugar and a bit of vinegar into the PET bottle. Then screw on the printed part and place the bottle on a table…
I designed this Elder Wand from pictures after watching the Harry Potter movie series again in anticipation of Halloween. It is divided into two pieces so that it will print on smaller print beds, but have also included the full wand for…
Remix of the snowy owl Hedwig by Peter Farell with a flat bottom (for an easier print)
Here's a tiny pergola for your climbing plants! Provide succulent shade for your succulents! There's now a version that prints faster ! You can also replace the vertical posts if they've broken! 💔 Featuring genuine, faux woodgrain and…
We all know the ships in a bottle, but how do you put a (hard) printed message or even a 3D model inside a glass bottle? It can (almost always) be removed similar to the way it came in. Manual how to do this yourself is shared under […
Create your own PET filament from plástic bottles! You can find all the information, blueprints, instructions, and much more on my website: https://sites.google.com/view/ecodecat3d/home KIT For a much easier assembly, you can purchase the…
Another accessory to organize fridge and not only fridge storage. This fridge bottle holder designed with durability and minimum plastic usage in mind. There are 2 models - 2 or 3 bottles. Maximum bottle diameter: 90mm Height of the rack:…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
Thread Design This standardised thread is called PCO28 and is produced in two versions. PCO28 1810 - the original standard (point of this article) PCO28 1881 - the newer material-saving version with a shorter thread. My problem was that…
Two versions for long or short screws, the hole for the rod is 6mm. 5 top and bottom, 3 walls, 30% gyroid, no supports.
This sleek yet simple Dispenser keeps your Cotton-Swab's clean and ready for use. Rather simplistic on the outside, the internal geometry provides proper swap-feeding. Please keep in mind, that the swabs have to be pushed down a little by…
As an example what is possible to print with our Colorprint we designed Prusa Bottle Opener :D. The print is supposed to take approx. 30 minutes and the printer will ask for filament change with beeping after 25 minutes. Don’t forget to…
Build your own robot like a Ninja 🐱👤 This is the first emotional modular EdTech Arduino opensource robot that can walks & rolls! Features 👣 Walk & dance 🚗 Transforms quickly into a wheeled robot 👩💻 Simple Programming with Otto Blockly or…
Building a biped robot that moves around like a person is a significant challenge, but you don’t need much experience to build a robot like Otto. Humanoid is also sturdier than the previous versions and includes various upgrade it’s code…
Printed with regular 0.15mm quality profile in Prusa slicer with PETG .
This planter was inspired by an instagram post by pimnynkeprint , where they had designed a planter to look like a classic terracotta planter. I thought that was such a cool idea, and a very classic look, but I wanted to put my own spin…
The source marked this model as adult content.
Easy print for all fans. Harry potter keychain.
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Keep your cleaning supplies organized with this practical spray bottle holder. Perfect for storage rooms, cleaning cabinets, garden sheds, or workshops. Designed for easy wall mounting using two M6 screws, this holder secures most…
A Harry Potter Phone Stand printed in three parts that slot together. Prints without supports
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
Harry Potter Headphone Stand Would make a great gift Easy to print, slots together. Use supports for the top Stands just over 20cm tall UPDATE: I have updated the top file to a thickened version that is easier to slice. The original…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…
Army Painter Speed Paint is a fantastic paint range that can save bundles of time in miniature painting. Their labels, though, do a poor job of truly showing what the paint will look like on the model. These toppers can be painted and…
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
FOR COMMERCIAL USE: Check here Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean! Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its…
The existing Elder Wand designs all look nice, but none of them are particularly screen accurate. I set out to design a more organic version to have a custom model to sell in my Etsy shop. I'm releasing it under a non-commercial license…
Golden Snitch Harry Potter
Modeled in Blender for nice vase mode prints. The Nuka logo is nicely smoothed so perfect for single perimeter prints.
Quad was inspired was inspired by #OttoDIY hat we all know ;) and MiniKame is a little quadruped robot based on an ESP8266 WiFi module. It has 8 servos (two per leg) and a small LiPo battery. Features 👩💻 Simple Programming with Otto…
This is a Harry Potter wand that was remixed from low_seb's Harry Potter wand ( https://www.thingiverse.com/thing:3267372 ), and published with permission from low_seb. Note that it does not show as a remix in Thingiverse as low_seb's…
This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.
Sorting Hat from the Harry Potter movies to use as a finger toy
Print: I printed with PETG with 0.3mm and variable layer height (because of thread). A brim is recommended. Food safety: at own risk. Depending filament and print. Please let me know your experience. 2024.5.06: version without air…
Harry Potter deathly hallows themed bookend. Please like and enjoy :).
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
A simple self-refilling water bowl for cats using a PET bottle. A 2-liter bottle would be ideal. Printed with Esun PLA+ with a 0.6mm nozzle, 2 walls, 4, top/bottom layers, 30% infill, NO supports. 2- liter bottle model is for reference…
Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the fun Now This is FUN! Guaranteed hilarious fun in any situation when you brought this with you as a gift or just for the…
Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.
This is just a simple and very small bottle cap container, i.e. you use ordinary bottle caps as lid. It adds only 5mm height to most bottle caps. At least for all the caps I tried, the cap closed nicely and tightly. EDIT: There are 2…
You can create am Arduino obstacle avoiding robot or a sumo robot, remote control car or even a line follower. Add more sensors depending of what you want your robot to be. Otto is super easy to make, assemble and code. You have plenty…
🙌By supporting my Patreon , I can continue offering free models. 🎁Get the 'Flexi Animal Keychain' Welcome Pack, the 'Flexi Dinosaur Keychain' Welcome Pack and May Patreon Pack exclusively on my Patreon (Limited offer). 🎈There are two…
UPDATE 25/04/2024: Added a second version with wide stream - useful for covering bigger area This is yet another adapter cap that screws onto any regular PET bottle (that has PCO28 thread) so that it can be used as a watering spout -…
A practical 3-piece funnel set designed to screw directly onto standard PET bottles. 🔄 Each funnel connects using a built-in bottle thread — no slipping or holding required 📏 Available in three sizes: 77 mm , 112 mm , 147 mm 🧴 Ideal for…
harry potter tags for Christmas, Pendants or keychains
Printed in PETG provides adequate flex for putting them on and off multiple times.
Easy but very nice print, enjoy!
I reworked my office recently and added a couple IKEA Skadis pegboards. I've been using and loving CSD_Salzburg's Skadis set and decided to make some more custom pieces for specific needs I have. One of which is to hold my mini paints in…
Update: Just uploaded “V3” Versions (slightly better looking, slightly better function) Backstory I was unsatisfied with most of the printable bottle cages because they usually only fit one specific bottle/can size and do not “grip”…
Meet your new favorite desk companion! This fully articulated Flexi Otter moves realistically and provides a satisfying sensory experience. Printed in one piece with no assembly required—just print and play with this adorable aquatic…
This is a box in the shape of a book on the theme of Harry Potter. The book cover is adorned with Harry Potter lettering and the Gryffindor coat of arms. To complete the hinge of the book cover, you need a piece of filament (1.75mm) that…
(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…
Hello everyone, here are the print instructions: 0,3mm 5 perimeters (for additional strength) 100% Infill PLA or PETG (PLA is strong enough to open countless bottles) No supports needed Happy Printing and Na zdraví!
Use a brim for adhesion. The full bottle is a 2-3 hour print at 0.2mm layer height . Should also scale well within your slicer if you want a different size. You could try printing the half-bottle face down rather than standing up although…
Beautiful designer organizer for cotton pads and sticks.
The Cotton War – Organizer for Cotton Pads and Q-tips Print settings (no multicolor needed) : Nozzle: 0.4mm Layer height : 0.2mm with adaptavive layer height Infill : 5% grid Wall loops: 2 Supports: Tree (auto) only needed for characters…
A generic lid/cap for bottles and jars. Can be configured to fit most containers. Allows for containers with multiple interleaved threads. NOTE : I've published an updated version of this called Parametric Screw-Top Lid .
Otto got arms and LED matrix to look similar to a "Human". Assemble with our Builder Kit H or create your own using the opensource designs. I recommend to first check all documentation for the Otto DIY Starter if you are a beginner and…
Drink holder that clamps to tables. The holder has a large diameter to accommodate a large range of cups and bottles. After printing, simply slide the cup holder into the table clamp from the side. There are two parts at the back of the…
Joined the four bottom parts of the original so that no screws are needed for assembly. Also made two different new tops. The middle ring remains the same as the original. Hope you like it and have fun!
This is a digital 3D printable model of the Golden Snitch from the Harry Potter series. It’s designed to work with both FDM and SLA printers. The wings can be printed flat, which makes them especially easy to print on FDM machines. After…
A super cute, and super small articulated otter! I made it as small as possible and it turned out great! works with a 0.4 nozzle and works even better than it needs to with a 0.2 nozzle. its print in place so you don't need any supports…
flip onto side to save filament and enable supports.
The bottle opener assists people with arthritis, limited finger dexterity or other disabilities to open standard water bottle caps (⌀ 30 mm or 1.18 in). The device provides a large gripping surface and clamps onto the caps of standard…
All Things STL wine bottle holder: Does require 2 small tree supports. There are two different models one for 200x200 plates and one for 220x220 plates. If you have a Prusa (or this size printer) print the 200x200 If you have a larger…
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
***IMPORTED FROM THINGVERSE*** I made a 1st Version with a different holder. I had tested out the first version so I could make this version for my mom. Remade the board to fill in the empty spaces and make it look cleaner around the…
Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
"Harry Potter" Cookie Cutter set 1 - 8 models / characters Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Dolores Stamp - 50mm x 68mm x 4mm Cutter - 58mm x 76mm x 12mm Draco Stamp - 47mm x 69mm x 4mm Cutter - 56mm…
This is a bottle spout with an integrated air channel that makes pouring liquids much easier and prevents annoying glugging and spilling. It is designed for standard european bottles (PET and glass). The spout is fastened with a knurled…
A little rack for holding spray bottles in the garage. It's held to the wall with #8 screws. I printed it in PETG with no supports.
Space efficient Skadis paint bottle holders that create honeycomb layout on the wall and perfectly tessellate. They are made for four groups of paint bottles: Paint dropper bottles as produced by Vallejo, Army Painter, AK, Reaper, etc.…
Hast du Probleme eine PET-Flasche zu öffnen oder kennst jemanden, der dringend Hilfe benötigt? Dann bist du hier genau richtig. Dieser Flaschenöffner ist ideal für ältere Menschen, Menschen mit Gicht oder Rheuma, also Menschen, die nicht…
There's a model for a 48mm thread (usually from European 5-6l bottles) and for a 28mm thread (ex. Coca Cola bottle). Using a 48mm thread is recommended because the seeds don't get stuck Poke a small hole in the center at the bottom of the…
