Counting matching models…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
In case you want to design a part that includes a tp4056 charge controller.
Fan mount for passively cooled Nvidia Tesla K40 and P40 GPU's. designed to work with dual GPU's.
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
I added more protection in the grill to prevent fish and snails from getting into the impeller area.
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
Small case for the TP4056 charger with a window for the status LEDs.
A kind of funky fan shroud for a Nvidia Tesla P40 that cools not only the card at a rated CFM but also blows air into the next PCI slot for 10gig networking, HBA, etc. PWM controller makes the fan basically silent in a full tower case.…
A tight-fitting mesh for a Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Drop it into your model and the component fits so snugly in the recess that you don't need anything else to keep it in place
Hey, This is a fan shroud for Nvidia Tesla cards which are structurally identical to the P40. After a failed attempt using a normal Noctua (damn I sank money into it...) fan I realized that air pressure is the key to cooling the P40. Due…
This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.
This is a charging holder for a single 18650 lithium ion battery. It uses the TP4056 charging board, that you can get easy on eBay. (Search for "lithium usb charger" or "TP4056") The battery contacts used are 10x10mm but you can use…
Fan ducting that can fit an Nvidia Tesla Pascal-generation P100 and possibly P40. Maybe even more! I'm not sure. I don't own any of the others. I am not good with computer. Or 3d modeling. If this isn't perfect, I'm sorry, please teach me…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
A quick and dirty (emphasis on dirty) hack of HojoWork's 90 degree 120mm blower duct. Removed the bend so you can conceivably mount 2+ cards on the same board. Requires supports to print. The first one I printed worked out fine, but the…
This is work in progress next update will be adding an NTC for more safety. Edited 19-12-2022 : added a little how to and some Data, Features & Technical Specs After multiple prints and test I finally came with a design that I'm satisfied…
Print settings: Printed with support (I printed it with "normal" support, tree support may also work) Short version may also need supports on the inside 3 walls 20% infill Comes in 3 lengths Includes printable gaskets for better…
This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
This is a small remix of an existing model I found on onshape. All credits to the original designer of the fan shroud. I'm using sunon fans with the product id mf40201vx-1000u-a99. These are Sunon 40x40x20mm fans. They are not expensive…
MP40 wallbuy from Call of Duty Zombies games. Using Xbox 360 buy icon. Can do filament swaps / multicolor for the text and x button.
Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports. Printing filament: Original designer called for…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
BASIC MODEL: TP4056 USB - C Lithium Charge Module
designed mockup model of TP4056 USB-C charging module for representation in bigger assembly
About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…
Print-in-place Lamborghini Countach in 1/50 scale No supports required Reccomended layer height is 0.1 - 0.15 mm I reccommend setting bridges speed to 10mm/s Enjoy!
Simple TP4056 Housing. Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
An MP40 replica, might be not very accurate but still very realistic.
PTEG to make it saltwater safe 25% infill
Replacement fans for radiator and dynamic brake for Aristocraft GP40 and SD45 locomotives. May fit others as well. The one indicated by the arrows are printed - others are factory.
I made this after I found chunks of a clown fish scattered around the tank. No idea if the MP40 actually chopped up my clown, but now I'm pretty confident that they won't end up in there somehow. Probably not small enough to keep an…
This model allows a 92mm fan to be mounted to a NVidia Tesla P40 & V100 cards. It was designed to replace the funnel from eBay, which had two small fans, which were very noisy. The eBay fans came with a fan controlling circuit board for…
This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…
A 3D-printed 180° adapter that mounts a 12032 sidestream fan onto an Nvidia Tesla V100 (P40 also fits) with the fan intake bent 180°, so exhaust is directed away from the board instead of blowing back into the GPU or the neighbouring…
Same shroud, just with a chamfer
This is a low profile bracket for a p400 gpu. The mounting screws cut threads into the plastic. Fit is pretty decent. Print with supports as shown. I set the model to be solid throughout (0 infill) to get it as stiff as I could.
With severely limited mounting space, this solution provides at least basic cooling capabilities. Mounting the fan as close to center as possible to distribute the air flow as evenly as possible and reducing the amount of supports that…
Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…
NVIDIA Tesla P40 Shroud with 2x4010 Fans on top instead of bottom
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
Fan model: Delta BFB1012SHA01 Screws: M2x6 11 pcs. M3x16 3 pcs. I also added a model in STEP format.
For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…
Used in the Soviet army since the early 70's. DPP40 stands for Desantniy (airborne) Pontoon Park, 40t, what is the maximum vehicle weight, the system can carry. I’m not a military expert, but my first idea, when reading about was – if…
When I printed the nice “SANDING DISK STORAGE BOX AND LID” by Peter H (a fellow V1 Engineering maker), I scaled the box vertically in Cura because I needed it to be taller. In addition to the scaling feature, I also made a “P40” divider…
I made this simple print to run an Nvidia Tesla P40 outside of my rackmount server as the server doesn't have enough internal space to fit it. The print simply keeps the card upright and locked to the psu so it doesn't slide around. The…
Box for Siemens KTP400 HMI panel and proximity card reader. ITEM aluminum profile bracket included. It contains three sets - custom box, back and holder parts. Print instructions výška vrstvy 0.2 mm, výplň 20% GYROID, materiál PETG.
Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…
The Turin SD40 is a good entry level grinder, but it's major draw back is the relatively large stepped grind size adjustment locking mechanism. This worm drive and dial gear replaces the original and allows for stepless grind size…
High profile bracket for Nvidia Quadro p400. The mounting screws cut threads into the plastic. First wanted to add nuts, but I don't think it is needed. Embedded cylinders for extra rigidity, it really helps with holding GPU in a place…
meshtastic heltec v2 battery case with two 18650 , back parte compatile with a famous heltec v3 case look like in photos
First advice-not props. With them, there is a high possibility of tearing off the spoilers, not to mention the need to clean them after printing. Second advice-only PLA. I printed from PETG (I didn't have a black PLA) and the wheels…
Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…
Hi all! I struggled with OpenPNP vision pipelines with the standard black-oxide coated CP40 nozzles. With the bore being low contrast, even runout calibration could sometimes prove difficult. The way I resolved this was by developing a…
Based on the flange design by @qwertymodo, I modeled a press-fit model to more completely fill the bottom vision's field of view. It's 40mm in diameter, and best printed in ABS/ABS+ for its matte texture. I've printed in black so far with…
Saw this video on Youtube before I got a printer, decided to make a more compact version. https://www.youtube.com/watch?v=bRGt_Fh9CVA&t=588s Wiring design is the same. I bought the TP4056 & ZB2L3 on Amazon, I am not recommending any…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
A stand for the Roland sp404 mk2. I put some carpet on the top to maybe prevent scratches and some thin foam on the bottom to stop it from sliding around.
Flipped version, for clearance to motherboard. If clearance is not needed, the other version is preferred. (check other version for pictures too) Please consider reporting back if this worked for you. At least one reply please! ========…
80mm fan adapter shroud for Nvidia Tesla P40
I designed and 3D-printed a custom fan mount for the Tesla P40 GPU, addressing its passive cooling limitations. The mount securely attaches to the GPU, allowing for the installation of an active cooling fan to improve airflow directly…
Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…
A easy to print mount for the Phanteks P400A (might work with other Phanteks cases) No supports needed, use original screws from the case and route the cables from the Fans on the front. disclaimer: might not fit exactly as I made this a…
I strongly recommend to use at least two of Arctic P14 Pro fans as they're able to keep P40 bellow 70°C at 80% of max RPMs with 25°C of ambient temperature at 100% load. Model's designed to be mounted at 2020 aluminum profile with…
Print instructions: Printed with PETG. Infill 15-20%. Print the thread and nut without support . For the dust filter I used PVC sheet, 0.45 mm thickness with 1 mm holes , fixed in place with super glue This is an unofficial,…
Here is my holder called "The Forehead Beacon Tower" 🤪 After two mountain bike tours in the darkness with smartphone LED, I decided to buy a cheap but very good headlamp. In this case it is a Sofirn SP40 with 1200 lumens. I fits perfectly…
If you, like me, have too many TP4056 charger modules, and want to organize them using Gridfinity. I've got the perfect thing for you! The magnet holes are 6.09mm, so you only need to press them in to the holes. No glue required. I also…
Simple 2d design of the MP40.I will make more guns if you want to suggest them let me know in the comments.
Makes sure you have a more consistent background for bottom vision cameras in pick and place systems with CP40 nozzles. This fits machines like the LumenPNP. The outer diameter is 35mm, this seems to work fine with my bottom camera field…
This model provides a small and effective box for TP4056 charger module. The box is useful, as shown in the images, the box has some space for cables on the back, collected in a single hole, in example when a JST or similar connector is…
This enclosure is optimized to securely and compactly house the TP4056 charging module. The structure includes a stable base and side walls that snugly fit the board’s dimensions, preventing unwanted movement. It features precise cutouts…
Juki-style vacuum nozzles have a large flange to act as a background for picked parts and aid in computer vision processing. This adds a press-fit flange to Samsung CP40 nozzle holder to achieve the same purpose.
Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.
the foot of my PC Case broke while moving it, so i recreated a replacement. I think it could mirrored to fit the other side.
BOM: Tp4056 type-C charger (for example https://pl.aliexpress.com/item/32930640893.html?) 1x4 2.54 male gold pin connector (remove two outside pins) 18650 batttery spring plate (i found them locally, they need to be 18 mm wide, they are…
My Proxxon vice is solid steel. The steel jaws are unforgiving when clamping objects made from soft or fragile materials. To protect the vice held object, I designed some flexible TPU jaw protection covers. The covers provides a soft…
Build your own 1:50 scale Lamborghini Countach LP400 from a 3D-printed kit card. Print the card without supports, separate the parts from the frame and assemble your miniature Countach. Keep it on your desk, add it to your car collection…
Print two. A hose clamp will hold them together, so the seam only needs glue or tape to seal. Fitting the duct on is very snug. Made with 0.4mm increments in mind for 0.4mm layer heights.
This is a TP4056 based 20 cell charger which is to be used with a 5V 20A SMPS (for all modules charging at 1A current)
Mount for Sofirn SP40 on 25.4mm handlebar (1 inch). Printed with PLA, 0.2mm layer height on Ender 3 Holes are for M3 nuts and bolts EDIT: Added shorter mount
This modification of the Gameboy Advance SP battery cover incorporates a Type-C TP4056 charger module, allowing for enhanced functionality. Inspired by Makho's original design (available here ), this mod offers a sleek solution for…
I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…
Hi, it's my quick flash holder for wurkkos HD15 and other Angled flashlights. handlebar 25-30mm. Light 21-25mm you need: 1pcs Screw M3x35mm 2pcs Screw M3x20mm 3pcs Nut M3 Cap for wurkkos HD15 is in my channel :)
Battery pack, that fits two vape cells in parallel + TP4056 module. ADJUST THE CHARGE CURRENT RESISTOR ON TP4056! Should be printed from temperature resistant filament to handle soldering (of the contacts and on the tp4056 board). I used…
Filled some of the output sections. If you plan to have your Ecotech MP40 near the bottom of the aquarium and you're worried about blowing away the sand, maybe this merged guard+redirector project can help. Haven't yet tested how useful…
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
A small tool for unscrewing the bezel on a Sofirn SP40 head torch. The indents in the bezel are quite small, so this print needs to be pretty accurate - I have access to a Formlabs Form 2 resin printer, but some tinkering might be needed…
I made a cockpit mount for an all in one FPV camera (GOQOTOMO GD02 on Amazon) for the Eachine p40 RC plane. You'll need to cut off the old foam cockpit and screw the board into the bottom of this printed one. You can power the camera from…
Main board tray and connector shell for TULIP4041 DevBoard. https://www.hpmuseum.org/forum/thread-22013.html https://github.com/mjakuipers/TULIP-DevBoard Printed from PETG with 0.2 mm nozzle.
This compact model houses a TP4056 charge model with space for a disposable vape battery at the back. Perfect for running LED fairy lights where unregulated output is fine. It can house a round vape battery, about 16mm X 16mm X 38mm.
Printed with 0.4 nozzle and 0.2mm layer.
