84 models
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Adapter compatible with the Ryobi GoGoVac PCL731 Suggest printing in PETG for strength. Pictured using OVERTURE PETG Grass Green which is very close to Ryobi green. Don't have a 3D printer yet? That's OK, order already printed from……
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the CapClip – your ultimate companion for outdoor adventures! Designed for hikers, campers, and all explorers alike, the CapClip revolutionizes how you carry your favorite hats on the go. Help me create more FREE models! If…
A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed. It is printed with 75% infill modifier block to reinforce the screw clearance holes.
This is a quick hanger to hang the new Ryobi 18V Cordless Hand Vacuum with Powered Brush. It sits flush against the wall when mounted and I am happy with the fit. Printed in Inland Tough PLA at 220 degrees. 3 walls and 30% infill. It can…
for a standard soldertipcleaner with a diameter of 67mm. on a gridfinity 2x2x4 with 6x2mm magnet holes. if you need an other diameter please let me know
Nozzles for the Ryobi PCL733 1 Gallon Wet/Dry Vac. These are created from Zivbot's "Customizable Vacuum Tool" SCAD files. In case you need to make adjustments, SCAD files with the parameters I used to create each nozzle are included.
I don't like the clips rolling around the house, because I can't find them when I need them. so I decided to make a stand not only to store them but also to display them, and now they can even be on display somewhere in the kitchen as…
Use a couple of screws to mount this anywhere you want your vacuum at hand. You'll need a little force to pop it into place and remove it. Make sure your screws are flush! I also made a similar one for pegboard that doesn't have the…
A print in place Tek-Lok-compatible belt clip. No hardware required for assembly! If you need Chicago screws, McMaster-Carr 94887A129 works, and there are plenty on eBay too. Includes a spacer for use with narrower belts, if needed. Print…
Compliant print in place clamp for Desks with dual cross axis flexural pivots — for enough tension choose a smaller size
Wanted an extension that tapered down to a narrower opening than the standard crevice tool and also wanted something I could print out of TPU to be able to have some squeeze and give to get into even tighter spaces without worry about…
🚨THIS DESIGN IS NOW DISCONTINUED IN FAVOUR OF A NEW (and better) DESIGN 🚨 Check the new and updated design of this clock ⬇ https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281…
I don't like the clips bouncing around the house, because I can't find them when I need them. so I decided to make a stand not only to store them but also to display them, and now they can even be on display somewhere in the kitchen as…
Built to hold Ryobi vac attachments.
Created this to keep the accessories with the hand vacuum for convenience.
Motivation: This is a material development project I started working on to develop reliable print parameters for PCL filament. PCL is unique in that it can be remoulded after heating in warm water (~ 60 [C]), and is a very tough and…
Ryobi Orbital Sander Dust Collection Adapter (PCL406) ShopVac side has an Inner Diameter of 2.291" (58.2mm) Want to purchase a printed product? Check out my website:…
I needed a tarclip for the Furniture covers. They needed to be fastened and removed quickly. So i made these Print Settings Printer: Anet A6 Resolution: 0.2 Infill: 30 Filament: REAL PETG orange Category: Outdoor & Garden
Ryobi PCL704 adapters for one-half, five-eighths, and three-fourths inch ID silicone tubing. The necks are long enough to fit a hose clamp around, if needed.
The scalable multi-purpose clip. Fast to attach and remove and can be done so one handed. Note: This is a small object with close clearances so a relatively well tuned printer will be needed. Print instructions Two perimeters/shells work…
As tactical_snacks put it: A drop-in, hanging style wall mount for the Ryobi PCL702 cordless vac. Can be used with or without the battery installed.
Neon led StripClip for ikea skadis
There are several Ryobi leafblower wall mounts out there, but none of them seemed to fit my specific model. Before printing, verify that this will fit your model, I've included pictures of my leafblower for comparison. I printed this in…
You always need some way to clean the soldering tip. This mount onto the soldering iron and provides a stable way to clean the tip. It holds on with a 5mm hex head screw that presses into the knob. I used 3D Fuel Lulzbot Green filament,…
This is an adapter for the Ryobi 3 Gal shop vac to use generic small sized dust bags. I am using…
A blower nozzle that securely bayonet mounts onto the Ryobi One+ 1 gallon shop vac. It might also work with the 3-gallon model.
I created this to have a wide tip option for the PCL700. Make small crumb cleaning quicker by sucking up a wider path and reducing the number of passes needed. Basically the opposite function of the crevice tip. I printed with 99 wall 0…
The case is made so that both the AirTag and rear clip snap fit into place. Use a brim for the clip as it does not have enough bed adhesion without it. There is video explaining how to insert/takeout the AirTag and the rear clip. Assembly…
Added mounting screw hole
Hello everyone, I have a small gadget with a big WOW effect here – the CUPCLIP ☕ The CUPCLIP transforms common paper cups into a practical cup with a handle, ensuring more comfort for coffee to go With a print time of only about 25…
I designed a 5 bit holder that mounts on the Ryobi PCL235 impact driver. I printed it at 100% infill with PLA, and a tree support to support the upper mounting point. The bits snap into the holders, and at first are a bit snug but loosen…
Create a mount in OnShape for the PCL811. Was inspired by other designs but wanted one with 2 screw holes and can be printed without supports. Top/Bottom can be either side, with #8 wood screw holes as part of the print. I have them 6…
I modified the authors original mount to be used with the IKEA Skadis system. This mount is for a Ryobi PCL702 hand vacuum Parts: (3) M3 x 12mm long SHCS (3) M3 T-Nuts for Skadis by ORM - Found Here Print Settings: Material: PLA
Wall bracket holder for Ryobi Trim Router PCL424 Spanner slots into left arm Optional hook on side for vacuum adapter
This is a compact SnapClip Carabiner designed for everyday carry. The model features a smooth, flexible spring arm and an integrated side clip that allows you to attach it to pockets, straps, belts, or bags. The carabiner prints without…
This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…
## Danger Safety glasses are recommended whenever using power tools including this one. ## Bill of Materials * 3D Printed part * 2 M8 x 1.25mm x 90mm Bolts * I used this one from Bolt Depot, because I had it on hand. *…
A tall and long tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transparent PLA and it has held up great for months of use. If printing in…
I wanted a replacement part for Ryobi hand vaccum incase I ever lost it so I painstakenly modeled this part up. It fits the Ryobi PCL702 vaccum and adapts it to be able to use 1-1/4" tools. It is about 1.5" longer than the original as…
I designed this is tinkercad so there is nothing special about this design. I lost the original flap that went inside the nozzle to keep the debris from falling out when the vacuum is turned off. I printed this with pla and it works but…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there ! I spend too much time drawing Derpemon (Derp pokemon), and thought I'd put together some little paperclips. These are…
Made a globe that friction fits (holds tight) onto my Ryobi flashlight to turn it into a lantern. Printed in PETG and it worked well on my camping trip.
Ryobi Router P601 or PCL424B ( or Ridgid R86044 or R2401 ) Dust Hose Adapter to allow for the connection of a shopvac to the Ryobi OEM dust hose connection. Available complete via my website:…
Print with the claw flat against the bed - prints without supports. Highly recommended to use a filament like ASA, ABS, or PETG as strength and mild flexibility are critical for this part to work. Recommend printing with all walls.
Elevate your soldering station's functionality and aesthetics with the "TipCleanerTrove 67mm - Gridfinity Remix", a redesigned holder specifically for a 67mm soldering iron tip cleaner. This model seamlessly integrates into your…
This dumb insert is required to use the PCL704 / PCL704B and all aftermarket adapters attach to it, and it is not replaceable since it has been out of stock for over 6 months and no aftermarket sellers have it in stock either. Mine broke…
This flashlight holder is designed to snap onto the rim of a 5 gallon bucket manufactured by Leaktite Corporation (and sold by The Home Depot, True Value and Ace Hardware among others.) Printed on its end, the "LampClamp" is…
Introducing the KrapClip - the ultimate solution for dog owners everywhere. Tired of carrying around those messy poop bags during your walks? The KrapClip is here to make your life easier. This innovative klip hooks onto your dog's leash,…
🥖 Modern Designed Chip Clip Keep your snacks fresher for longer with the Modern Designed Chip Clip , a functional 3D-printable bag sealing designed for everyday kitchen use. 📑 Table of Contents 1. 📐 Technical Specifications & Dimensions…
"so what actually is a RIPclip?" the RIPclip is a ecosystem of 3d printed sillyshell stripper clips for homemade nerf blasters. the design is meant to be extremely compatible with pretty much any blaster design someone could make and was…
A wall mount for Ryobi Multi-tool PCL430.
Securely mount the Ryobi PCL 406 Sander to the slatwall.
Mount to store air tools using PCL Fitting recommend using high infil
A longer pointer version of the Ryobi 1 Gallon Vacuum Nozzles (PCL733) by Steve S. Printed in TPU on my kboras1, 3mf file has the print profile. Works great for tight annoying spaces.
The left and right platform pieces sandwich the iron right below the model and Ryobi stickers. I used M3 hardware, heat sets optional as not much room. M3 screws only needed to attach to platform. Solder holders can be cut off in slicer,…
jumpcloud logo with security text
Please Check Out all my other Models here ! or My Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is a remix of Original Design ” Snaps - STEP Multiboard Remixing Files " by The…
A short yet wide tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transpartnet PLA and it has held up great for months of use. If printing in…
This is a remix of a hornet trap, it now has gripclaws.
Rival CompClutch Paddle Clutch Compact, reliable, and smooth to use. This clutch paddle uses a tiny potentiometer and opposing magnets for a satisfying spring action, slipping neatly into tight spaces without compromising feel. Included…
An easily portable and accessible cup/water bottle holder that you can clip to your desk, table, etc...
I couldn't find an OEM one, so I replaced the filter on my Ryobi One+ shop vac with a Milwaukee one that fits fine, but it has a different bayonet mechanism and so it would randomly fall off, letting dust bypass the filter. Glue this ring…
Description: This is a replacement cooling fan designed for the Ryobi PCL001 portable compressor. The original fan in my unit failed, so this model was created as a direct-fit solution to restore airflow over the motor. The fan mounts…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I needed a model of this part for something I am creating and one did not exist, so here it is. It's not perfect as not all the tiny components and markings on the PCB are included, but its accurate for fitment testing and…
For a long time now I've wanted to make parts that intentionally fail at different temperatures. PCL is a very soft, very flexible filament with a VERY low melt point. Normal printing is in the range of 70-100c which is why it's used in…
Designed to keep snow/rain out of the battery area of the PCL690 tripod and the out of the hinges and power button of the Ryobi PCL632 360deg LED light The PCL690 cover allows only the 18v battery to power the tripod (it slides into the…
This is a three-piece nozzle with the black cap made from TPU. The nozzle tube is printed on its side for layer strength. It has a flat side for bed adhesion. No supports needed but there will be a little sag inside the tube. You can use…
Chipclyp ist eine Erleichterung zum Verzehr von Stappelchips. Die Entwicklung hat einige Zeit gekostet und ist jetzt aber vorläufig abgeschlossen. Druck: Ich empfehle euch ein lebensmittelechtes Filament zu verwenden und euren Chipclyp…
This is a vacuum adapter for the Ryobi PCL734 18V vacuum that allows it to use a standard Type-A vacuum bags instead of the expensive Ryobi filters that clog up quickly when vacuuming things like drywall dust. This also means cleanup is…
3 Perimeters 15% Gyroid infill 3 top- and bottom layers No support
PopClamp Under-Table Bottle Opener – perfect for opening cold ones with ease. This design uses a metal bottle opener insert purchased online: https://s.click.aliexpress.com/e/_c31u7uST The insert fits securely into the 3D-printed part for…
After vacuuming up a larger area I saw the need for a wider nozzle. This one is 20mm X 100mm and uses a slightly tapered TPU sleeve for a good secure fit on the vacuum cleaner. The main nozzle is PLA and prints with nozzle down on the…
This is the Mipclip, a Silly Shell carrying system designed to attach to the non-standard webbing spacing of the SCRD Tactical Belt, as well as options for standard MOLLE spacing. It's heavily based on the original RIPclip, but is…
I designed this holder for 23 mm diameter kitchen taps to provide a simple place to hang small kitchen cloths near the sink. It clips directly onto the tap using a two-part clamp, with no screws or drilling required. Features Designed for…
Disclaimer! You print and use this at your own risk, I will not be responsible for any damage that may be caused by this design. With that being said, the RipClip did't cause any damage whatsoever during testing, it doesn't seem to stress…
Nozzles for the Ryobi PCL733 1 Gallon Wet/Dry Vac. These are created from Zivbot's "Customizable Vacuum Tool" SCAD files. In case you need to make adjustments, SCAD files with the parameters I used to create each nozzle are included.
I couldn't find an OEM one, so I replaced the filter on my Ryobi One+ shop vac with a Milwaukee one that fits fine, but it has a different bayonet mechanism and so it would randomly fall off, letting dust bypass the filter. Glue this ring…
"so what actually is a RIPclip?" the RIPclip is a ecosystem of 3d printed sillyshell stripper clips for homemade nerf blasters. the design is meant to be extremely compatible with pretty much any blaster design someone could make and was…
3 Perimeters 15% Gyroid infill 3 top- and bottom layers No support
PopClamp Under-Table Bottle Opener – perfect for opening cold ones with ease. This design uses a metal bottle opener insert purchased online: https://s.click.aliexpress.com/e/_c31u7uST The insert fits securely into the 3D-printed part for…
A longer pointer version of the Ryobi 1 Gallon Vacuum Nozzles (PCL733) by Steve S. Printed in TPU on my kboras1, 3mf file has the print profile. Works great for tight annoying spaces.
