2,390 models
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
After seeing @i6o6 “Simplest cable organizer” , I feel in love with the idea of a dead simple cable organization system but ended up wondering if I could make a similar model that would be suitable to be printed extremely quickly using a…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for PETGSource material: PET
Lampshade with holder for E14 lamp socket. Printing: The lampshade was printed with one perimeter (per layer) only, but not in vase mode. The two test versions of lampshade holder were printed in vase mode. For E14 socket a negative…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
A bookend with a subtle Star Wars aesthetic. The bookend has a pattern similar to what is seen on Imperial Star Destroyers. I printed a few with Galaxy Black Prusa PLA and added a neoprene base to prevent it from sliding. It works great…
Print approx. €7.08–€8.65 excl. taxPreliminary estimate for one variant
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
The bronze dragon was cast in 1842, in front of Duyet Thi Duong gate, Hue Imperial Citadel.
Print approx. €16.54–€20.22 excl. taxPreliminary estimate for one variant
What the video below to see it in action! Use a pen to hold the 2 balls/marbles/bearings for a clean start and watch the bumpy road win! Ball size/weight/starting position/layer height all affect results. I used ball bearing and practived…
Print approx. €5.56–€6.79 excl. taxPreliminary estimate for one variant
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
This is a 3D model of the world's first chiral aperiodic monotile. “Chiral” means “handed” -- same as left and right handed screws you can't transform left into right just by turning the object. It's an update to…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
Update Dec. 24, 2022 : I added a new set of templates with recessed text labels. These new templates allow for a flush top so that a router can be used on top of the templates. The new templates fit the old holder. The new templates have…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
This is a more compact handle designed specifically for the Elk 2m/70cm log periodic antenna, which I designed to be smaller than the PVC-based handle that it comes with from the manufacturer. This makes it handle a lot more like the…
Print approx. €9.94–€12.15 excl. taxPreliminary estimate for PETGSource material: PET
Plants need fertilizer. Manual dosing kept me doing to much or too little with results accordingly. The pumps feed liquid fertilizer into the irrigation system while watering. Dosing can be adjusted on a very wide range. A lot of…
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Peg for holding down the perimeter/guide wire for robot lawn mowers. Print instructions Prints fine with 0.3 layer height with PETG/PLA.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Socket set for 1/4" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
Starting with my Base Model , I used feedback to design the best possible clip for daily use. I have printed in PETG and PLA (Both gCode is included) with success. Parameterized Fusion360 files are attached for your own tinkering.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET
Ptolemaic Period Jewelry : Euclid's Cypher Ring.
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
An aperiodic monotile, sometimes called an "einstein", is a shape that tiles the plane, but never periodically. For more information about this shape, see: website dedicated to this shape video showing the space of related shapes paper…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
This is a decorated version of the Hat aperiodic monotile. It includes three “pipes” joining the √3 sides of that tile. The result is quite mesmerizing, with an aesthetic reminiscent of the Tantrix/Palago-style puzzles and the Celtic…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Star Wars Imperial Crest Extruder Visualizer 3D printed in 2 colors, white and black. I do not have an Multi Material Unit (MMU) for my Prusa. I had to insert a filament change command in the G-code so I could change the color. It can be…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
UPDATE updated 2024-May-09 with ‘Extras’ which includes ‘a title peice’ tiles for ‘period’ and ‘group’ 'key' for explaining the different aspects of each element ‘corner guide’ for the packing board, ‘hangers’ for hanging the finished…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Remix of Yuliya Myxa's Empire Coaster in which I re-meshed (TinkerCAD did not like the previous mesh), resized to a 97mm outer diameter, and added the hole for the ornament. If you want, you can scale the ornament up or down; scaling down…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
This is a cheap and easy way to experiment with the new family of aperiodic monotiles discovered by: David Smith , Joseph Samuel Myers , Craig S. Kaplan and Chaim Goodman-Strauss . You can find more info here:…
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for one variant
This is maths, it's a tile, and now it's a toy :) You can tile the plane with it. With no gaps. Any way you tile it, you can never find a repeating pattern that continues paving the plane. About 50 years after the Penrose tiling's…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Dog sitting for my son for two weeks. He didn't have a scoop for the food, just said 1 to 1.5 cups twice a day. So I have to make a scoop for her food. Printed with PETG at 0.2 with paint on supports (automatic painting) and a variable…
Print approx. €7.58–€9.27 excl. taxPreliminary estimate for PETGSource material: PET
A parametrized version of the newly discovered Spectre, an Aperiodic Chiral Monotile. See: https://cs.uwaterloo.ca/~csk/spectre/ for more details about this shape. This version includes the OpenScad file, so you can modify the “polygon…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This deployment dashboard works well in conjunction with the character miniature bases. The dots in each slot tie directly to the identification dot on the bases. There is a deep vertical slot to hold the deployment card and a shallower…
Print approx. €3.65–€4.47 excl. taxPreliminary estimate for one variant
This is a remix of the Player Dashboard by Farlei. It is has a larger card space to allow for sleeved (103mmx128mm) cards and a slot on the side for Condition Damage or Strain tokens. Printed with PLA Layer height: .15 Perimeters: 3…
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
A simple Imperial Assault player dashboard: Large slot for 1 Hero sheet 3 slots for small cards: hero, item, supply, reward, etc. You can fit at least 9 small cards (more if overlapping cards) I created this dashboard to use with the…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Socket set for 3/8" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
A set of recursive OpenScad scripts to generate some aperiodic tilings of the plane: Ammann-Beenker , Armchair , Chair , Domino , Golden Triangle , Half-Hex , House , Penrose , Pentomino , Pinwheel , and TriHex . The STL and GCODE files…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
External dimensions 82.000, 11.000, 165.000 mm
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET
Socket set for 1/2" drive imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640 More…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant
As described in Smith, D., Myers, J. S., Kaplan, C. S., & Goodman-Strauss, C. (2023). An aperiodic monotile. arXiv preprint arXiv:2303.10798 . Unlike some other models that are derived from Craig Kaplan's interactive tiling toy , the…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
small diameter depth stops, cone nose to aid in chip clearance and visibility, uses 3mm x 12mm Cap head bolt and 3mm hex nut
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Hi, this is my first model ever, I'm new in this 3d printing world and learning about tools and tricks. The Idea in this pencil holder is to achieve some sort of fabric texture, in order to do that I played removing perimeters and using…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
This is a follow up by David Smith , Joseph Samuel Myers , Craig S. Kaplan , Chaim Goodman-Strauss of their discovery of an aperiodic monotile two months ago. Yesterday (may 29, 2023) they announced they now have found a family of tiles…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Closely following the Hat , Spectre is a shape for aperiotic tiling that does not need to be flipped. More details are in this arxiv preprint . There is a parametric openscad model to generate the tile (or multiple) with different…
Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant
You can use either PETG or PLA. Picture frame snaps together. There are two frame sizes available which your Peripage Mini Printer can output. Enjoy :)
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
Aperiodic monotiles are trending right now! :)) This one is not a real tile but it obeys the exact same logic and tiling constraints as the recently discovered “hat” aperiodic monotile. If you have not already seen what this is about,…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Many models appeared recently after the discovery of the aperiodic monotile family. More about the mathematics behind it here: https://arxiv.org/abs/2303.10798 Here's my interpretation of the “Turtle” variation, along with a Fish version…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Socket set for 1/4" drive 8pt imperial sizes compatible with the popular Gridfinity organization system. I have designed different models for a variety of socket sets: https://www.printables.com/social/175706-aaronoaks/collections/279640…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
I found this Brave Vesperia Crest from itcamefromthecomputer , but I didn't like how every piece would fit together and the pieces couldn't be printed flat. I changed the design to be easier to print. Instead of having pins on the bottom…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Phone holder is open.
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for PETGSource material: PET
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
Tento tvar byl objeven v roce 2023 - https://arxiv.org/pdf/2303.10798.pdf Nepravidelná dlaždice pro stavebnici k pokrývání roviny. Aby bylo možné model mnohoúhelníku vytvořit, má tloušťku 2 mm, i když se jedná o rovinné útvary.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Design used for experimental work on batteries. It features a placement for material, a gasket and attachment points.
Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant
prints well when thickness scaled to fit whole perimeters. did not try it yet, but should look awesome with transparent or semiopaque materials
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
What This is a set of coasters that have an in-laid aperiodic tile pattern. Why Aperiodic tiles are cool, and I don't have enough coasters. How The included 3mf project file contains three instances of same tile each scaled such that the…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
The idea was to design a cookie “stamp” that can be handled easily. The know is screwed on the plate so everhything holds together, but the plate remains moveable, so the dough can be easily taken off if it sticks. The outer form is…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
This is ruler Measures in both Metric Centimeters and Imperial Inches. As I live in America I found myself needing a ruler in inches (Even though we all know that Metric is the superior unit of measurement) while I could only find ones in…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
The Whispering Petals Vase is a delicate ode to nature's grace and beauty. Its flowing petal-like patterns give a sense of movement and serenity, making it a captivating centerpiece for any space. Crafted with a harmonious blend of…
This imperial drill guide is the perfect helper for accurate drilling with bit sizes ranging from 1/8 – 3/8 . The guide is designed as a sturdy bar with clearly labeled holes , making it quick and easy to select the right size for your…
Massive props to StevenDuvall for laying a quality foundation for my remix effort based on his work Intense and in-depth scientific market search has shown us that 95mm is the optimal length for a 3D printed articulated fish skeleton and…
Works with rotary tools like Dremel, Wen, HyperTough, etc. Attaches using 3/4 threads. Cuts 19 sizes of holes from 2"-6.5" Use 1/8" cutting bits like Rotozip Edits: Added Metric version Added slider insert version that allows the user to…
The organizer includes the following components: 4 player boards (identical models except for using different letters: D, U, N, E) These can be printed in different colors, using a color swap to make the iconography more visible. Inspired…
Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…
Printabel Model of an Imperial TIE-Fighter.
An imperial/SAE screw gauge to help sort or measure unknown screws or bolts. Inspired by many others similar designs, this one has raised text to allow a colour change on the top two layers for added contrast. Use the side cutouts to…
Description Parallel Line Scribing Tool A practical tool for drawing perfectly level lines parallel to the surface, eliminating the need for a tape measure. Simply insert a pencil into the desired hole and slide the tool along the…
A thread test block for coarse imperial threads (UNC). You can see if your printer is capable of printing threads. If the threads are good, you can use it later as bolt measuring tool too. I've also made a Metric version for this model:…
Based on Sneaks and Boogies designs. I added an imperial sizer too. Made them the same size so you can clip them together. UPDATE: SEP 2022 - Added a fractional version. UPDATE:MAR 2023 - New Improved Fractional Version…
🌀 Peristaltic Pump (NEMA 17) This is a compact, fully 3D-printable peristaltic pump designed to be driven by a NEMA 17 stepper motor . The pump uses standard 608 bearings and soft tubing, making it easy to build with commonly available…
Here is my personal interpretation of the Star destroyer. I made this model to fit with my previous resurgent class star destroyer. Once finished this model is 53cm long. The model is designed in several parts to avoid to have support…
Warning the text and the body are separate parts within the 3mf to help with coloring.
This is the robot from the icy snowy planet in the Fifth movie and not screen accurate. Model is finished and print verified. This model is best printed at 100% scale on FDM. SLA/SLS - go as small as you'd like. I find on FDM, 120% to…
Straight from the Empire’s ranks, the Mini Stormtrooper is here—small, detailed, and ready for your desk or keychain! Designed for multi-color printing, this model features clean details and simple supports that are easy to remove. Inside…
TL;DR: No-lid-lift, suitable for vertical storage, fits sleeved cards (see last page of pdf), fast setup, and teardown insert for the boardgame Dune Imperium including its both published expansion. Pro Tip: shuffle the required components…
Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…
Link to improved version A replica of an Imperial I-class Star Destroyer as seen in A New Hope and Rogue One. Print instructions Scale is at 1:1,000. Unless you want a 1.6m long print, you should probably scale it down first. I printed…
Wow, another awesome model from the guys over at https://3dwarehouse.sketchup.com/index.html Print instructions Category: 3D Printing Tests
Interchangeable Corner Rounding Jig Set (R5 - R40) This modular guiding system is designed for woodworkers and makers who demand perfection in every detail. It allows you to create flawless, burr-free curved edges on panels by guiding the…
Update : 28-04-'24: Tighter version of the blade holder added. Remix of the Scraperite handle by Genghis. I like Genghis' design, nicely done with the curved shape and knurling; but the part for holding the blade didn't work very well for…
Hex nut sorter V2 Now including a fully customizable parameterized .scad! Let me know if there is a size you'd like added. No supports needed. Enjoy! What is it? A device for easily sorting all those hex nuts your kids dump all over your…
I really like this Model, printed it, painted it, Love it!
This is a Volcano with base for the Vinegar and Baking soda and dish soap experiment, I have included holes for TPU printable feet and Plug for the bottom (10-15% infill, recommend raft for TPU feet) . For the volcano, I printed it on the…
Insert for Dune Imperium with the expansion Rise of Ix. Fits in the existing card board insert. Designed for sleeved cards. The wall thickness is optimized for a 0.6 nozzle but can be printed with a 0.4 nozzle as well. Each file indicate…
Here's a small imperial credit I modeled in fusion 360. Scale it by around 200%. Heavy trooper helmet, https://www.thingiverse.com/thing:4915358 Captain Rex helmet, https://www.thingiverse.com/thing:4914130 Be sure to post a make and…
The one and only truly periodic table of elements. A similar cylindric design might be seen elsewhere, however the periods are always organized as a circle of same height. The increasing Z and periodicity, however, call for a different…
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
More of my favorite Disney Character in several of the classic “Stitch” poses. Currently I am uploading the color swap version that can easily be printed on most single extruder printers (no AMS/MMU). I will get a “paintable” version…
Mini versions of the Imperial and Metric Screw Sizes without the part on the right. Remix of kmccon design.
Imperial Cutter model from Elite: Dangerous Model is split into two parts at the widest point and down the centre to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for…
The Imperial II-class Star Destroyer, also known as the Imperial II-class Destroyer and colloquially the ImpStar Deuce, was a Star Destroyer model that was derived from the Imperial I-class Star Destroyer. The Anakin Solo, also known as…
Edit 5/14/24: leaders tray has been increased a bit to accommodate the larger leader card size This insert was designed to help me get Dune: Imperium tabled more easily. It includes: Deck holders for Imperium cards, Intrigue cards, and…
Version 2 out now in a remix ---> All you need is a Nema 17 motor, 4 x 608 bearings and some 8mm plastic Tubing (Soft tube needed). You will also need some 16mm M3 screws to attach the pump assembly to the stepper motor. Of course the…
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. Supports may be required for optimal results. Feedback is greatly…
A set of improved tokens for Warhammer: The Horus Heresy: Legions Imperialis from Games Workshop. Included are the four order tokens (Advance, First Fire, Charge and March), a Fallback token, and six objective markers. Use these instead…
Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
This is a model of the imperial crate, These are items that were seen in the Original trilogy. Made to go with 1:12 scale action figures to enhance a collector's display. No supports required for this specific model. Feedback is greatly…
