Counting matching models…
Keep pesky birds, squirrels or other creatures off your stuff with these defensive spikes. This brand new design is printed flat for speed and printability. It uses very little plastic compared to other designs on Thingiverse. The end…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
Update 23/09/2023: I have tested the single point water spike and found that the hole was to small so it printed solid i have now made a v2 and made an adjustment so the hole is about a 1mm in diameter and prints without closing up…
I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…
Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…
I printed ours out of PLA and this is their third winter on our roof, after having been attached with a hotglue gun. When placed in sufficient quantities and strategically placed, they work well at keeping the pidgeons out of the little…
I like to see you make and review! The neighbourhood cats make a habit of jumping on my garden hose reel. This can't handle this well so that's why I designed this and attached it. Advice: carefully remove it from the bed. The design may…
DISCLAIMER: Adding elements to the helmet can be DANGEROUS and even ILEGAL. DISCLAIMER 2: Original 3D designer: SergiLorenzo Therefore, they must be printed on flexible material, which does not interfere with the operation of the helmet.…
A simple spike strip I made for my balcony handrail, to keep birds from resting and doing their business there. Nothing fancy as such. Dimensions copied from some strips I had purchased too little and ran out of. They came with two-sided…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…
articulated lizard remixed in blender
This model is compatible with the lego system.
perfect for print in TPU if you want flexibility or PLA if you want rigid piece.!!!!
Add some extra traction to your Parkside robot lawn mower! These fit really tightly to the wheel.
A spikes for better grip that helps a landroid going uphill or in a sharp corner
One with medium spikes, one with long spikes - both tested. Paint little support in the middle and your good to go. Print everything else according to the original model from Wivry. I have made my own improved Moss Pole, if you are…
This is the Ice Spikes set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
Lucky 13 Sword with Spikes Diablo Style If you like it --> press like it :-) Sword for the funny lucky 13 figure, which is inspired by the Diablo Hack and Slay game. I use this hands to use the sword, they work better than the original…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…
This model is compatible with the lego system.
Glue the cap on. print solid or with 40+ infill.
This model is compatible with the lego system.
This model is compatible with the lego system.
I remixed the original Ice Spikes by bdworks4 to create a more even surface so that a figure can stand on the terrain and I added a base to make them fit into MaxHex tiles.
I've used the wheel design and added spikes on one side for better grip.
This model is compatible with the lego system.
Speaker Spikes & Washers Modelled in muscad, rendered into OpenSCAD, rendered into STL. The muscad version used here is fork that is still in development, which adds fillet & chamfer operations to cylinders. You can find it here . Four of…
There are many versions for face shield headbands. But all of them require making holes into the protective sheet by punching or laser cutting. Too complicated in my opinion. Here is my version of the headband without pikes for holes,…
It is so to print Material: PLA/PETG etc. Size: 25cm long With 2 screw holes, but i fitted it with double sided tape
This is just a simple long spike version of a test print for printing on fabric. I have a short spike version as well for those who want to try it with less height. I can also add a tutorial for fabric to use as well as procedure if…
Included are a couple of sizes that you can just pop in the slicer and get going. Also I have included a .blend file with the model for more tinkering, increase - if you want a custom size , just increse or decrese the array modifiers…
🦇 Halloween Bat Headband – Spooky 3D Printable Costume Accessory Add a spooky touch to your Halloween costume with this bat-inspired headband , featuring large bat wings and decorative spikes. Designed as a fun and eye-catching 3D…
This model is compatible with the lego system.
I really like pigeons but I don't like cleaning their shit so recently I have embarked on a quest to stop them from nesting on my balcony for the third time. Those models are the results of that struggle. Spikes can mounted to different…
Got chickens or other birds that climb on top your fence…? Do the commercially available options not work because you need something beefier…? Well, look no further! Bird Spikes that can be fastened to the top of a fence - tested against…
There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…
IMPORTANT: Print the bricks with line width set to 0.45. You may need to adjust flow before the bricks stay together well. If the bricks are too loose - add 1%, if they're too tight - reduce by 1%. The spikes can be very sharp. Don't…
Dragon Dice tower with spikes to prevent dices from escape
I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…
This model is compatible with the lego system.
ShadowJak's version on Thingiverse had a very small gap between base and model, which showed as errors in some slicers. For this remix I fixed that by moving the model down to the base.
It's important to keep bird droppings from getting into the rain collection funnel of your weather station, so bird spikes are an important addition. This spike ring is designed to fit funnels that have a 118mm outside diameter, which…
This planter is designed to cover the standard plastic planter with a beautiful geometric design and contain the water from drainage holes. You can plant directly in the 3D printed model but be aware that 3D design do not have drainage…
Cat deterrent spikes for the top of your fence. These have quite a thin base, but are quite strong enough. Simply screw them to the top of your fence to keep cats away. Two sixes, 250mm long and 80mm long. This should do you but you can…
Es sind 9 , 35mm hohe Spikes die vielseitig verwendet werden können. Ich persönlich habe die simplen Spikes für Figuren erstellt, um sie besser in der Steckmasse zu befestigen. man kann sie auch selber so Skalieren wie man sie braucht
These spike are a quick model that lips onto the inside edge spikes of the original wheel. they should work by just clipping them over the inside spikes on each wheel making 8 extended spikes per wheel. The 17 mm spikes are probably too…
Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…
I've prepared two models with different spike types. Original model: https://www.printables.com/model/1325786-traction-assist-wheel-for-parkside-pmrda-20-li-b2 3D printing spikes for Parkside robotic lawnmowers. Compatible with the PMRDA…
A pointy cone spike to put on crocs.
Protection de bras et moteurs avec spikes et supports intégrés
All three pieces are meant to be printed separately. I recommend printing the skull with supports.
I remixed this bag clip from scratch in Fusion 360. I added some spikes for a better grip. Printed in PLA and PETG, works just fine, no support is needed Print and enjoy.
Fusion 360 file included with various clip options Inspired by @Variable's model. Allowed to secure Duvet Cover / Blanket Clip together. Added new clip with spikes.
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .02 Infill: 10 Filament: Prusament PLA Gravity Gray Category: 3D Printer…
This model is compatible with the lego system.
A small set of barricade spikes. Category: Props
Yards spikes in a few different lengths for the Vigoro Edging Kit. The kits don't come with nearly enough spikes for complex shapes or areas where you need additional retention. Print in supplied orientation with 3 or 4 perimeters for…
A spiked sleeve to attach to a wheelchair's handles and deter people from moving a wheelchair user without consent. No one design will fit all of the wheelchair handles out there so I have added a central trench to allow a zip-tie or a…
Self designed cable tray for Celestron RASA8 telescope which will generate nor artifacts at stars (e.g. spikes) and fit two cables up to 6mm in diameter for the camera. Combineable with RASA8 Bahtinov mask (see my profile). settings:…
Wanted a simple bird deterrent for our small garden. However, I wanted it to be really easy to print and not need supports. I designed this to be printed flat and without supports. It lets the spikes themselves be printed flat, and…
This model is compatible with the lego system.
Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…
This model is compatible with the lego system.
This model is compatible with the lego system.
TinyMtn Custom Pack 1 - Pikes Peak Area This is a package with a 3D model file of Pikes Peak and the area to the South, including Cripple Creek, Colorado, USA. Model scale is 1:250000 Model measures 4.1" x 3.1" x 0.46" (10.4 x 8 x 1.17…
After long time of experiments and trials I made another succesfull fishing lure, this lipless jerkbait, made especially for pikes. This fishing lure is traditionally fitted with a steel wire frame, unconventionally the frame is glued…
no longterm proof jet, printed in PLA 0.6 nozzle, 3mm height. seems stiff enough to work well. Automower_spikes v5: have a look on the drawing if the dimensions fit to your needs. Improved Version with broader Spikes due to v4 had still…
prints also very fast in 0,3 with 10% infill HAVE fun
These modular anti-pigeon spikes are designed to prevent birds from landing on fences, railings, balconies or similar surfaces. Each module measures 20 cm long, 3.5 cm wide and 4 cm high , and features a 3x14 array of sharp conical spikes…
This is a map of the entire Pikes Peak International Hill Climb course in Colorado. For smooth results print on its largest side vertically. This is how I did it. For a topographical relief map print the model flat. Note: The file size is…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Infill : 100% No support needed Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: textured…
experimenting with models since im new and tought this would be a cool idea for my 13 dummy SUPPORTS ARE NEEDED
I found the original design to be a bit too flimsy and easy to bend with the regular round legs, especially when you have a tall plant that leans on it, because the legs could be pulled from the holes with ease. I recreated the design and…
I made these to fasten/support things in my garden. Soccer goals, plant supports e.t.c. I printed them in Prusament PC, witch seems to be able to take considerable beating. But UV resistance might be lacking. PETG is also an option. Free…
This model has two variants, one with a connecting linkage and one without.
A new serie about plant or flower pots. This time with pyramidal spikes/arrows : "Spikes". There are 4 versions: 3 variations with arrows and one symetric. I recommend to make 100% concentric infill. It's best to use 0.2mm layers but…
These audiophile grade speaker spike to speaker feet conversion pucks are designed to enhance the sound stage and mid-range modality of most modern (and a few vintage) speakers. Using 4D computer simulation the precise harmonic resonance…
Bowser bracelet with detachable/screwable spikes Since spikes and bracelet are printing separately allows for easy use of different filaments Printing instructions: Bracelet x 1 no support needed infill 10% Spikes x 7 support needed -…
This is a very simple model to print. There are no interlocking parts and the print time is vastly reduced to about 30 minutes by using 3mm diameter bamboo BBQ skewers rather than printed spikes. They are a push fit depending on your…
Bird Spikes to keep Birds off a tiled roof. This is a remix of 3dbc`s thing but with a curved base plate to help glue to a curved ridge tile and increased width to base of spikes to make slightly stronger and easier - although longer to…
Hi! My first upload here on Printables! I have a Robomow RC308u lawnmower. The extra pair of wheels I got in the package of the Robomower is completley worn out after one season. So I made a new pair with twice the spikes! I have only…
This model is compatible with the lego system.
140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.3 Filament: Prusament PLA Gravity gray Category: 3D Printer Accessories
I made simple golf shoe spikes that I gorilla glued onto some old generic sneakers. I ordered new golf shoes online, but they are two weeks out. I didn't want to buy spikes to add to my sneakers as I already ordered new golf shoes, but I…
I designed and printed this ring of spikes to keep my cats from sitting in my house plants. Works best when pushed down into the soil and covered with a small layer to leave the spikes exposed.
My initial draft of TPU printed dragonstaff spiral spikes. Dependent on the infill, the spikes are harder or softer. I used 25% infill and its perfect for practise in our flat. The base/mount for the staff is for 22mm diameter staffs. If…
This model is compatible with the lego system.
used generic PLA, 0.4mm nozzle with 0.2 height. size to your requirement used glue dots to fix
TinyMtn Free Pack 6 - Colorado This is a package with 3D model files for four notable landscapes in the state of Colorado, USA. Mt. Elbert 14,440 ft / 4401 m Longs Peak 14,260 ft / 4347 m Pikes Peak 14,116 ft / 4303 m Mt. Sneffels 14,156…
I've many pidgeons on my windows, and we all know the gift they use to leave, so I decided to do something. :). printed on petg is perfect.
This infinity or fidget cube has small spikes all around it that massage the fingers. Especially for neurodivergent people with ADHD and/or autism, these small spikes have been found to provide additional stimulation that helps those…
*FOR PROP USE ONLY * Multi-color (No AMS Required) and regular versions available. Models are in print orientation. Scaled for mens small to medium hands so check measurements and adjust if necessary before printing. Kryptonite Batarang…
My soaker hose kept bending away from where I wanted it thanks to the sun's heat, occasionally landing on my delicate seedlings, so I made these hooked soil spikes to hold it down. Now my soaker hose stays where I put it, and my seedlings…
Prints as 2 separate models: a) the grass and spikes b) the rock wall. Normal .2mm layer height works great. No others special slicing settings should be required. The spikes will likely cause stringing. A heat gun will clean up the…
Spikes for mountainbike shoes with M5 thread. "Soft" type with the metal bolt not protruding. Hardware required: 4x M5x14 or M5x16 DIN 7991 Coutersunk head screw or similar M5 countersunk head screw. Print instructions Print with 100%…
![Bowser Spike Bracelet [detachable spikes!]](https://media.printables.com/media/prints/1052487/images/7975407_bc5e8771-478f-47dd-8cbc-35643fa4fcf6_92055d3a-0f84-49f8-8896-c551d6b1a9ba/pxl_20241027_000027358.jpg)
