P
Printableslovelytuna
composite resin adhesive syringe holder
You can print each of these three components separately and then glue them together for use.
- Downloads
- 773
- Likes
- 84
- Rating
- 5
Search results: posite
Counting matching models…
P
Printablesthall72
Lego Compatible (47905.dat) Brick 1 x 1 with Studs on Two Opposite Sides
This model is compatible with the lego system.
- Downloads
- 558
- Likes
- 40
- Rating
- 5
P
Printablesm_collectable
Greco Roman Corinthian Composite Style Pedestal Stand Set – Classical Decor
These Composite Ionic-Corinthian style pedestals bring classical elegance and feature a concave sided top block abacus, fluted shafts, crisp corner volutes, with both cylindrical and squircle column forms. Offered in short and tall…
- Downloads
- 550
- Likes
- 206
- Rating
- 5
P
PrintablesTimStough
Horga'hn Idol from Star Trek. Composite for Tall Printers
The original design is awesome and I printed one! However, one of the reasons that I built a Rostock Max v3 was to have a tall print volume. So, I composited the two part model into one (first STL file). I also noticed that the model is…
- Downloads
- 495
- Likes
- 67
- Rating
- 5
P
PrintablesMidori
Protection cap for RCA/AV/composite/component and subwoofer connectors
If you're a retrogamer or a collector of retro tech, or if you like high quality audio and invested in a receiver with external speakers and a subwoofer, you've probably run (or know someone who ran) into the problem of RCA connectors…
- Downloads
- 315
- Likes
- 54
- Rating
- 5
P
PrintablesTriple G Workshop
Pupa from Solar Opposites
Shout out to PALADINQP for this ridiculously cool model. → https://cults3d.com/en/users/Paladinqp/creations → https://cults3d.com/en/3d-model/home/pupa-solar-opposites-free-free-3d-print-model
- Downloads
- 287
- Likes
- 34
- Rating
- 5
P
PrintablesOsprey
Composite Mandalorian Helmet Scout Woggle/Neckerchief Slide
A Scout woggle inspired by The Mandalorian. Parts can be printed, without the need of supports, using different colours and then glued together. Depending on tolerances, glue might not be required.
- Downloads
- 266
- Likes
- 56
- Rating
- 5
P
PrintablesOsprey
Composite Minecraft Creeper Scout Scarf/Neckerchief Woggle
Print the inset in black PLA and the "Outer" part in any colour (usually green but the example uses glow in the dark PLA.
- Downloads
- 258
- Likes
- 72
- Rating
- 5
P
PrintablesRetroGameRevival
PC-Engine GT Screen Bracket + Template (LCD upgrade - RGBDRV/LCDDRV/Composite)
Design I designed a bracket for the PC Engine GT, to hold a 3.5" LCD perfectly centered if you are doing a screen upgrade. Print LCD You need to print the "Bottom_LCD_Bracket", and then depending on the driverboard, the accompanying…
- Downloads
- 222
- Likes
- 18
- Rating
- 0
P
PrintablesJace1969
Star Wars Galaxies Composite Helmet
Hi Richard, I have improved on this file to the best of my ability! it is a great looking helmet but I'm not confident youll be able to wear it with out cutting out the back and applying magnets. I think the lower neck rings and or…
- Downloads
- 217
- Likes
- 40
- Rating
- 0
P
PrintablesJer
Subnautica Inspired Composite Plant Pot
Prints without supports but make sure to turn down the speed on overhangs - the largest piece has a challenging overhang. Use CA glue to assemble. Some sanding may be needed where the lower 2 pieces fit together, especially if your first…
- Downloads
- 213
- Likes
- 95
- Rating
- 4
P
PrintablesProtopasta
Proto-pasta Sheriff Star Badge Metal Composite Test Piece
A new sheriff's in town, ensuring 3D Printing Filament remains interesting and of the highest quality. Find/modify design on TinkerCAD ( https://www.tinkercad.com/things/6pnSMGZ3lwV-proto-pro ). Print solid 100% infill using standard PLA…
- Downloads
- 178
- Likes
- 10
- Rating
- 5
P
Printablesmageb
Transparent Window Printing: PETG-/PVB-Composite (Proof of Concept)
Introduction Many designs like RC cars and trucks, lanterns, model houses, etc. would benefit if 3D printing could be used to create truly transparent window panes. But as you might know, FDM printing transparent filament per se does not…
- Downloads
- 147
- Likes
- 67
- Rating
- 0
P
PrintablesTomishape
Etagère - gravity and the opposite
L'étagère « Gravity and the opposite » viens de loin . J'avais déjà intégré ce principe dans d'autres modèles. Le principe de la surface concave-convexe je l'avais alors appelé « Gravity in the opposite ». Cette petite étagère mesure 44…
- Downloads
- 138
- Likes
- 43
- Rating
- 5
P
PrintablesKonstantin Radchenko
Composite column
Composite column. Greek order. 🏛 Complete the Ancient World Set This model is part of my Ancient World Collection . Check out the full series for more columns, temples, and ruins to build your ultimate tabletop scene.
- Downloads
- 137
- Likes
- 19
- Rating
- 0
P
Printablesthall72
Lego Compatible (78257.dat) Plate 1 x 1 with Handles on Opposite Ends
This model is compatible with the lego system.
- Downloads
- 133
- Likes
- 30
- Rating
- 0
P
PrintablesEndi
Elegoo Centauri Carbon 2 Composite Filter Muffler
Found Mongrel's design for the original CC, couldn't work with the Mesh very well, so redesigned this from scratch! This was my first model, I'll take any criticism. Problem: The stock CC2 exhaust composite filter only covers half of the…
- Downloads
- 111
- Likes
- 15
- Rating
- 5
P
PrintablesUltra-G
Dental Composite Tube organiser
A super simple composite tube holder for your composite tube needs. Will work with most composite brands (GC, Tokuyama…).
- Downloads
- 103
- Likes
- 4
- Rating
- 0
P
Printableseg_design
COMPOSITE SUSPENSION MOUNT, FRONT UPPER
This is the front upper mount for the upper a arms on the 1:8 6S ARRMA platform (BLX/EXB) Print in ABS/PETG/PLA 4 walls, top and bottom 100% infill.
- Downloads
- 101
- Likes
- 8
- Rating
- 0
P
Printableskkingsbe
3D Printed 29mm Composite Rocket Motor Mount
This motor mount is a lightweight, composite design that securely mounts 29mm composite rocket motors such as the Aerotech F-67 into BT-80 sized body tubes. Mounting much like a standard motor mount, it has an inner diameter of ~29mm, and…
- Downloads
- 95
- Likes
- 7
- Rating
- 5
P
PrintablesMelantech
Composite bike grip Cannondale D2 single lock-on
Additional parts needed per grip (Only if you're printing the lock-on ring) : M2 insert (3-3.5mm OD, 3-4mm lenght) M2x10mm socket head screw. The whats whys and hows: My original Cannondale D2 single lock-on grips were soft and…
- Downloads
- 85
- Likes
- 11
- Rating
- 0
P
PrintablesRetro Frog
Range Video RV-Splitter 4-way Composite Video Distribution Amplifier Case
Simple case for the Range Video RV-Splitter 4-way Composite Video Distribution Amplifier: https://www.rangevideo.com/products/rv-splitter-4-way-composite-video-distribution-amplifier Assembles using 4 m2.6 x 12mm screws. I also sell these…
- Downloads
- 82
- Likes
- 2
- Rating
- 0
P
Printablesreedx
Composite Demoulding Wedges
These demoulding wedges are used for the releasing/demoulding of carbon and glass fibre composite parts. Models are available in two sizes ( L x W x H ) Small : 57 mm x 30 mm x 7 mm Medium : 77 mm x 40 mm x 11 mm The tip of the wedges…
- Downloads
- 79
- Likes
- 8
- Rating
- 5
P
PrintablesRalf Hörhager
Composite decking end cap
The models were drawn in FreeCAD. Feel free to change the parts to suit your needs. I printed all parts in gray TPU from Amazon. As the names might suggest the simple version is easy to print and works great and the experimental version…
- Downloads
- 79
- Likes
- 7
- Rating
- 0
P
PrintablesTokytome
Composite planter
This planter comes in two parts, with different textures. It looks great when printed in different colors, creating a nice contrast.
- Downloads
- 74
- Likes
- 23
- Rating
- 0
P
PrintablesOsprey
Composite jack-o-lantern pumpkin Scout scarf/neckerchief woggle
This model, unfortunately, requires supports for the face details. Print the inset in black and insert it inside the outer model for the two colour face detail.
- Downloads
- 68
- Likes
- 21
- Rating
- 0
P
Printableswillnewton
Roller set for composites roller handle
I remixed the handle from this model https://www.printables.com/model/761118-roller-handle-for-composite-molding This is a set of several rollers I created to fit the new handles. They are not remixes. There is wide serrated roller and a…
- Downloads
- 67
- Likes
- 4
- Rating
- 0
P
Printableswillnewton
Roller handle for composite molding
I have the rollers uploaded here since they are not remixes. https://www.printables.com/model/761155-roller-set-for-composites-roller-handle Printed in PLA. Make sure to use enough walls so that the fork area prints solid,
- Downloads
- 64
- Likes
- 7
- Rating
- 0
P
PrintablesJack
Triangle opposite Rings
Rings 17.5∅ with tetrahedron pattern (positive + negative, both and mixed) (scale for size or bracelet)
- Downloads
- 63
- Likes
- 13
- Rating
- 0
P
Printablesmakermatto
High Clearance CR10 OEM Fang Mod for opposite heatsink
This is a remix of the High Clearance CR10 OEM Fang Mod. This can be easily installed also in the cr 10(s) that has the heatsink assembled in the opposite direction. You can print this without supports. Print Settings Printer: Creality…
- Downloads
- 56
- Likes
- 3
- Rating
- 0
P
PrintablesDendy
SAW GUIDE FOR CARBON COMPOSITE FORKS
This model is copy of Park tools overpriced saw cutting guide. There is main M8 bolt for tighting down the tube (You can use any M8 bolt you want if you dont trust plastic bolts just dont puncture your carbon tube :D). To connect Part 1…
- Downloads
- 54
- Likes
- 5
- Rating
- 0
P
PrintablesGennady
Composite panel - numbers for different tasks
The numbers are inserted into the segment with some effort.
- Downloads
- 51
- Likes
- 12
- Rating
- 5
P
PrintablesFaquaral
150mm to 150 mm AC flex duct Adapter - Opposite rotation
This is used to connect a 150mm hose from a DeLonghi air conditioner to a Casativo hose https://www.galaxus.ch/en/s2/product/casativo-air-hose-air-conditioner-accessories-44434201 Important: One side is reversed rotation, the other is…
- Downloads
- 50
- Likes
- 6
- Rating
- 0
P
PrintablesEndi
Gasket for Elegoo Centauri Carbon 2 Composite Filter Muffler
Modeled after StickAtSea's design, this is meant to be printed in 0.4mm TPU. I have not yet calibrated my TPU, still doing some other projects, but the design is a simple 0.4mm slice of the original model's base, with only the holes for…
- Downloads
- 49
- Likes
- 18
- Rating
- 0
P
PrintablesMichal Habala
Simple door hanger (the opposite way)
My wife wanted to hanger for grocery store paper bags which we often use to sort out various types of waste like paper or plastic. She wanted to put these bags in a closet, but in our case, the closet door open outwards, not inwards and…
- Downloads
- 42
- Likes
- 2
- Rating
- 5
P
PrintablesDoc
3.5 inch to 2x 2.5 inch hard drive adaptor; with drives pointing in opposite directions
Similar to other models , but this has the ports for the drives to be facing away from each other. Created out of necessity to fit into a Lenovo M900 SFF computer, which needs right angle data & power connectors. You should probably print…
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
PrintablesL-ectron-X
Composite Hook
This is the 3D model of an assembleable, rotating hook for light things you want to hang. Requires only tiny support. The finished hook can then be screwed or glued. Width/Breite: 3cm (7,62 in) Height/Höhe: 4cm (10,16 in) Print parts.…
- Downloads
- 39
- Likes
- 2
- Rating
- 0
P
PrintablesUltra-G
Dentistry Composite / Ceramic brush Tip handle
We needed some extra handles for our composite paint brushes, so I made one. Use whatever material and whatever printer you want. It's a straightforward print that should not cause any problems. Enjoy !
- Downloads
- 38
- Likes
- 1
- Rating
- 0
P
PrintablesOgama Industries
PUPA from-Solar-Opposites wall art 2 versions
PUPA from-Solar-Opposites wall art 2 versions wide line all joined standard open pieces
- Downloads
- 36
- Likes
- 5
- Rating
- 0
P
Printablescmh
Cateye composite water bottle cage offset mounts
Update 12 Oct 2019: The original design worked pretty well, but wasn't perfect. I redesigned it from scratch in Fusion 360. There are now three pieces: Cateye cage top bolt locator Cateye cage top bolt spacer Cateye cage bottom bolt…
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
Printables3D Drvce
Side Cutter Holder for opposite corner
Side Cutter Holder for opposite corner and little plastic scraper
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
PrintablesVLAD MARIUS
LEGO Brick 1X1 with 2 Knobs on opposite Sides
This is a LEGO Brick 1X1 with 2 Knobs on opposite sides (3 plates = brick). The brick is similar to the brick 4626882, but it does not need to be white.
- Downloads
- 34
- Likes
- 11
- Rating
- 0
P
PrintablesPavlo Matviienko
Composite wheel for casadio subaru model
Original model: https://cults3d.com/en/3d-model/game/impr3za-tribute-replica-to-subaru-impreza-22b-full-3d-printed-kit Composite wheel for casadio subaru model. Based on tpu 3d printed wheel model. Designed for easyer multicolor print.
- Downloads
- 33
- Likes
- 4
- Rating
- 0
P
Printablestruglodite
Composite decking tool (Parametric)
I designed this thing to facilitate installation of composite decking boards. Similar the tools you can buy from the manufacturer of your boards, this tool will helps ensure accurate board-board spacing and screw placement. I provided a…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesGrandSpaceWizard
Composite Product Display Shelf
ABA TECH TOYS https://modumotors.ca/
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
PrintablesRed_Team_Ray
Scaled Composites Aircraft Snowflakes
NOTE: Every model except SpaceShip2 has their name debossed on one side. Scaled Composites released these paper snowflakes in their newsletter the Carbon Copy and on their facebook page many years ago. I had this floating in my desk…
- Downloads
- 28
- Likes
- 5
- Rating
- 0
P
Printableszimz
V-CORE 4 Idex T0 belt retention to opposite side.
I changed the idex T0 fan / belt retention to be on the opposite side so I and you don't accidentally break your hotend wires while changing belts. It should also cut down on the amount of zip ties you use while messing with belts (b/c…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
Printables16 Bit Virtual Studios
Atari 7800 Composite Mod Mount Kit MK II
This is a Mounting Kit for a 4 Pole Female 3.5mm headphone jack, to solder into a Composite Video Mod, intended to replace the Atari 7800's RF modulator. The idea is, instead of drilling holes into your 7800, you would replace the RF…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesChris Riley
Porch deck hook flowers feeder composite balusters
This is a hook for flowers and feeder off you composite decking that requires no screw holes in your deck. I had a bunch of these balusters left over and wanted to use them. I bought these railing kit from Menards. Found here:…
- Downloads
- 24
- Likes
- 11
- Rating
- 0
P
PrintablesTMskillerTM
"Opposite Worlds" - A hexagonal Shadow Lamp
A lamp with six sides that throws two different shadow/light patterns on the ground. It uses a lamp with a solar panel to charge during the day. It is printed in one piece and doesn't need any supports. To use outside it is recommended to…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesMica
Hard Paint Roller for Fiber Composites
Size of roller body is 40x100 mm. It is designed to fit on 6mm rod. I use it for flattening glass or carbon fiber fabric when I apply epoxide on it. Solidworks 2013 source files included. Instructions Put stopper on the rod first. Then…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
Printableswizzo
RetroCastle VGA to Composite/S-Video Case
This is a case for the RetroCastle General VGA (15khz) to Composite/S-Video Adapter for the MiSTer FPGA. The PAL/NTSC switch is accessible and labelled from the top of the case. It requires 4 x M3 10mm to 16mm screws, whatever you have…
- Downloads
- 22
- Likes
- 2
- Rating
- 0
P
PrintablesJK
FDM Filamentcomposites
My research focuses on the innovative technique of mixing filaments to create composite materials for 3D printing. This method allows for the customization of filaments not only in color but also in electromagnetic properties. Key…
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesTomishape
Organiseur Gravity and opposite - Organiseur de bureau
« Gravity and the Opposite » est un concept que j’ai développé dans plusieurs créations. Si la gravité existe, peut-être son opposé également ? L’opposition de ces deux forces crée une signature visuelle très forte et l’ondulation…
- Downloads
- 21
- Likes
- 10
- Rating
- 0
P
PrintablesPavouk106
Xiaomi Body Composite Scale battery cover
I made this part for a friend that had broken battery cover on his Xiaomi body scale. The model of the scale is XMTZC02HM, but maybe there are other Xiaomi scales that this could fit on. Printed in original orientation with support for…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablesrenderman
Terry - solar opposites
this is a model of Terry from solar opposites. feel free to remix the model, i uploaded a obj file to help those who wants to rig him and print him in a different pose. just dont forget to share it on the remix tab :)
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesBrian
Surface Duo 1 Bumper (covers sim card slot and adds protection on opposite side of USB)
This bumper has more coverage as it covers the Sim card slot and also protects the opposite side of the USB port. ***Simple Bumper for the Surface Duo 1, BUT… I modeled it off the Duo 1 stock bumper as I do not have a Duo 1 any more.…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesOgama Industries
RED Gooblers-from-Solar-Opposites wall art
RED Gooblers-from-Solar-Opposites wall art ADDED SOME TEXT BANNERS TO GO WITH PRINT AND PUT NEXT TO
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesOgama Industries
Jesse-from-Solar-Opposites-wall art 2 versions
Jesse-from-Solar-Opposites-wall art wide line joined and std open
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
Printablesjattie
Fox and Eagle Wall Art - Harmony of Opposites
The simplicity and yet striking aesthetics of negative space is fascinating. Such simple lines and such a striking visual. Balance, Duality, Unity Harmony of opposites : The fox and eagle—land and sky, cunning and strength—form a…
- Downloads
- 18
- Likes
- 7
- Rating
- 0
P
PrintablesJJT
Composite railing 4x4 post cap
A big windstorm blew off several post caps from my outside decking. Some were lost, others were damaged, basically I was short 6 post caps at $12/cap. I spent a little time in F360 to come up with this replacement cap. This is designed to…
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesScio
Algae Based Composite (ABC) Vice Press Molding
I would like to express my gratitude to Aidan Leitch, whose "Recycled Cardboard Molding" 3D model served as a significant source of inspiration for the design presented here. Although initially utilizing Aidan's model, I encountered…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesMahalo74
Fiberglass Composite Honeycomb
This is a small section of a polypropylene honeycomb that can be replicated to any shape in order to construct complex curved fiberglass structural shapes such as roof, deck or walls for marine applications. This core structure with…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesChristian
Atari 2600 jr., Adafruit TRRS Audio Jack, Composite Mod, Platinenhalter, ohne Bohren
Da das Atari 2600 leider von Haus aus keine Composite Anschlüsse besitz und die neuen TV Generationen keinen Analogen Antennenanschluss mehr haben, ist es schwierig die Konsole an ein TV Gerät anzuschließen. Im Netz gibt es viele…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesOgama Industries
KORVO - solar-opposites-wall art
Yumyulack - solar-opposites-wall art
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesFranky Storms
Progenitor Composite from The Cycle: Frontier
This is the lootable common item from the video game, The Cycle: Frontier. Item Description: A clearly alien material, the Progenitors built their monuments on Fortuna III with this. Could possibly be used to build other things, as well.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesstebaut0
Composite wood decking spacer
Print on edge. I did 7 walls and made it solid Meant to put 3mm gap between boards Also will sit up against a 4x6 stringer and place screws 1" from edge of decking. you could trim it if you are using a 2" x 4" or 6" as a stringer. Left…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesBURNTkoki
Floyd Rose Tremolo Opposite (For making guitar with Floyd Rose)
This model is an opposite for Floyd Rose tremolo floating bridge. It has the screws for the springs and main screw area
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesProtopasta
Protopasta Hex P paper weight & postcard stand - great for metal powder filled composites
Print in metal for a nice, weighted feel. Oxidize or polish for unique finish. Simple paper weight w/ slot for postcards
- Downloads
- 15
- Likes
- 5
- Rating
- 0
P
PrintablesHyperspeed1313
General UltraTech 146 & 1433 Composite Calipers Roller Wheel
Use to add a roller to your digital calipers. The holder is specifically sized to fit onto the General UltraTech No. 1433 (3") calipers, but should also fit the No. 146 (6") calipers which appear to use the same slider assembly. The wheel…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
PrintablesNerfNerd
Simple Endcap for Composite Decking
You will need one short decking screw per decking board. Drilling the hole beforehand is strongly advised, because otherwise the screw when screwed in will veer into one of the existing holes on one either side of where you want it to go.…
- Downloads
- 14
- Likes
- 6
- Rating
- 0
P
PrintablesRemiRafael
Spool holder for The Virtual Foundry composite filaments
This design is a spool holder for the composite filaments from "The Virtual Foundry". Those filaments are brittle and need to be positioned in a specific position on top of your printer. This spool holder is designed to be attached to a…
- Downloads
- 14
- Likes
- 5
- Rating
- 0
P
PrintablesMarcin Kuberski
Upgrade for a cheap composites caliper
Protection against slipping of the guide in a plastic electronic caliper support not required 0,2 mm PLA
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablesbart921
Universal composite clip with magnetic pin
Pause print 2 times at the end of printing the inside sprint pockets in clip , and insert suitably shaped(you can use bending tool) hairpins or other elastic metal material. This will strengthen the structure and provide elasticity to the…
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
Printablesrustyc
draeger composite holder cut bottom
draeger composite holder cut bottom
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesDesign•Slice•Print Studio
Composite Superman shield
When Joe Meach, a janitor at the Superman Museum, was struck by a lightning bolt while in a room with statuettes of the Legion of Super-Heroes, he gained a number of powers. Having grown spiteful of Superman's fame, he used his new-found…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
Printablesrustyc
draeger composite holder cut top
draeger composite holder cut top
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesJosé Pedro
Polar Opposites Hueforge
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
- Downloads
- 10
- Likes
- 3
- Rating
- 0
P
PrintablesWillym
Simple biscuits for joining composite wood in 3 common sizes
3 sizes of biscuit for joining composite wood. I used these on composite decking material and used polyurethane construction glue for bonding. They are standard dimensions. The numbers help with glue retention. I was inspired by some…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesJohnny Blanchard
VTech Socrates Composite Mod RF Box Replacement
The Socrates is pretty easy to composite mod, just by unsoldering the RF box from the ribbon cable and then tapping off (from the left) the first (audio), second (ground) and third (video) wires. This box will then sit in the same area as…
- Downloads
- 10
- Likes
- 1
- Rating
- 5
P
PrintablesDr_Froggy_rD
a strategic concept to get a composite print_illustrated with the making of a pingpong raket
Hi there, I was looking for a solution to print a bi-compound PLA-TPU object without Multifilament, It is well known that TPU and PLA are not well stackkable as it is not sticking well to each other. see I illustrate My concept with a…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesCooper Larson
Y-Tensioner (Face-Mounted, Composite-Optimized Clamp) - Tevo Tornado / CR-10
Y-Axis Belt Tensioner (Face-Mounted, Composite-Optimized Clamp) A rigid, face-mounted Y-axis belt tensioner for Tevo Tornado , CR-10 , and similar machines using a 2040 Y center rail mounted on a 2020 cross extrusion . This design…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesSebastian Barchak
Motion Composites Wheelchair Cupholder
Biggest issue I face being a wheelchair user is the difficulty in carrying a cup of water around the house. This design was made to help fix that problem for me. My wheelchair is a Motion Composites Helios A7, however it will work for any…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesTommy1972
Handle with attachment for vacuum regulator( ec4,vr20 easycomposites)
Handle with attachment for vacuum regulator
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesJoel Keen
Opposite hand MMU2S MK3S ir-sensor-holder
Required if more clearance is needed on top frame rail than is given on normal build. LOOP mod compatible
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesZortium 3D
Flat edge pieces for composite panel
I wanted the end pieces to have a flat edge to give that final touch.
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
Printablescarlo iannelli
floppy disk eject button opposite direction
u bought a floppy drive and the eject button is on the opposite side than the case cutout? download this and fix that problem!
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
Printablessirromeoj
Gridfinity 4x Wham Bam Composite Abrasive Pad (CAP) holder
A holder for 4 x Wham Bams Composite Abrasive Pads (CAP) for the Gridfinity system. Tinkercad link can be found here if you wish to modify the design https://www.tinkercad.com/things/cSoKuwfBSGo-wham-bam-cap-holder
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesTailslide
Raspberry Pi Camera Mount For Aluminum Composite Carriage
This is a remixed version of the camera mount that fits the wider tabs on my aftermarket aluminum composite carriage. I also made it rise up a bit as I found the camera kind of low. You will also need the camera enclosure from the…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesAlucardWulf
16x2 Aluminium Composite Piping Edge Clamp
just a simple Edge clamp for 16mm piping.
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesSpoolHouse
Foamposite Pro
This is a Foamposite Pro–inspired sneaker wall art piece , designed for clean 3D printing and bold display . The model features layered linework and cut-through detailing that prints crisp and looks 🔥 on a wall, shelf, or sneaker setup.…
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
Printablesand_rei
Сomposite Toothbrush Holder by PRSPR
Composite holder for one toothpaste and at least two toothbrushes and toothpaste, includes removable drip tray and feet.
- Downloads
- 6
- Likes
- 1
- Rating
- 0
P
PrintablesCooper Larson
Y-Axis Motor Mount (Composite Exoskeleton, Potential M4 Roller Upgrade) - Tevo Tornado / CR-10
Y-Axis Motor Mount (Composite-Optimized Reinforced Bracket) A high-strength, composite-oriented Y-axis motor mount for the Tevo Tornado and CR-10 family. This mount replaces the thin sheet-metal bracket with a rigid, vibration-damped,…
- Downloads
- 6
- Likes
- 3
- Rating
- 0
P
PrintablesShyavanS
iPhone SE Gen 2 (2020) Composite Case
A composite case made of two materials for the iPhone SE Gen 2 (2020). There is an outer hard shell intended to be made either in PETG, Nylon, or PC, and an inner soft bumper intended to be made from TPU 95A or another flex. They are…
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesProkop
Design Template Composite Bridging
Print intstructions: Print Bridge first. Print Body and pause in slicer before the first bridging layer starts. (be careful not to pause 1 layer too deep) Place Bridge inside (be careful not to detach the body from the print bed) Resume…
- Downloads
- 5
- Likes
- 1
- Rating
- 0
P
PrintablesANYBY
A composite hook
A composite hook for something. I have made it for some reason I would like not to explain, if You like it, use it!
- Downloads
- 5
- Likes
- 2
- Rating
- 0
P
PrintablesMST_3D
Cable routing for thermal insulation composite systems
This cable guide makes it easier to position cables under the insulation. It is very helpful for symmetrically mounted lamps.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesRed_Team_Ray
Scaled Composites Aircraft Snowflakes from end of 2023 and 2024
The 2023 update is shown in the picture with the orange prints. Adding three(3) models, the Swift and two(2) different M401 designs. The 2024 update is shown in the picture with the green prints. Adding one(1) model, the M437-Vanguard.…
- Downloads
- 4
- Likes
- 0
- Rating
- 0