Counting matching models…
Zusammen mit dem Designer @MeisterEdel habe ich dieses Testmodel mit meinem Logo entwickelt. Es testet euren 3D Drucker in Bezug auf Toleranz (inkl. Gewinde), Bridging, Maßhaltigkeit, Wandqualität und Oberflächenqualität. Es gibt zwei…
A tiny mixing tray for glue, epoxy, resin, or whatever sticky stuff you’re working with today. It has a little holding tab so you can hold it in your hand, or pinch / clamp it to the edge of a table to keep it from sliding around. Great…
If You have some nearly empty spools laying around, you can print some of these mixing spatulas with the infamous last meters. They come in handy for mixing 2 part compound adhesives, glues and sealants. I have alway some spare laying…
Features: - only 10g of filament is used - perfect for using up the remaining bit of filament - spatula snapping points are not located on the handle instead of on the tip (easy to break off too) - spatula radius matches internal tray…
A compact, stackable disposable mixing pad with a small integrated spatula, designed for mixing epoxy, resin, glue, and other adhesives. Quick to print and using only a few grams of filament, this model is perfect for fast workshop use…
Remix of the Prusacaster. The core has been modified to accept an Amazon Tele kit. I filled in the hexagons to create pockets to pour epoxy into. I also added slot for square nuts to attach guitar strap posts. ☑ Build and Demo Video ☑ ☑…
You can use this tool to mix paint or epoxy with your drill.
Two sizes: 70mm and 40mm diameter. Watch the Video: https://www.instagram.com/reel/CkjCa6CjjpO/?utm_source=ig_web_copy_link Like it? Please don’t forget a like any maybe a follow, thanks a lot 😊 For more Project’s and insights, see my…
Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…
The ergonomic thumb recess provides much better control , helps keep your fingers away from the nasty, sticky stuff in the tray. Has a left (LH) and right-hand (RH) version, A right-handed person will normally use the RH tray in horizonal…
A highly efficient, heavy-duty mixing paddle designed to replace broken or worn-out commercial epoxy/paint mixers. Engineered with a multi-fin blade design to create a strong vortex, ensuring thoroughly mixed resins, epoxies, or paints…
An epoxy mixing set that consumes about 2.2m filament, good to print a few for your last meters. Updated with a version 2 with one slanted and toothed spatula in one end and a straight flat in the other. Small quality of life improvement.
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
Epoxy mixing spatula & spreader Combined stirrer, applicator for the Epoxy Work Station I joined the tools to make one tool instead of two. I increased the thickness of the tool ends to make them less floppy and reduced the thickness of…
small paint/epoxy mixer with Hex-rod 8mm, total diameter of the rotor is 35mm and 20mm tall. Rod is 100mm long but easly strechable if needed longer.
This is a rough approximation of the flashbang from CSGO. It prints in multiple parts that fit together without the use of glue. All models should load in their recommended printing orientation. The handle and the top cover require…
A truly stackable, small epoxy mixing tray - perfect for using up the last meters of your filament! Ultra-light: Uses only 3.6g of filament. Ergonomic: Unique shape makes it very easy to hold and handle. Print without support.
Epoxy Resin Mud Power Mixer Blade Drill Tool / Plastic Paddle Replace Resin Mixer Drill Attachment
This is a replacement mixing nozzle for the 2K epoxy adhesive cartridges from UHU. With this glue I like to glue larger components or generally components which must be firmly bonded together. Unfortunately, only two mixing nozzles are…
Ergonomic Spatula for Thermal Paste / Epoxy / Glue - Spatola ergonomica per pasta termica / colla Easy to print, optimized filament usage Resize/Scale to adjust dimension All our designs are free to download and use—we believe sharing…
Liked the size and shape of the original design. However the edge was too thin for mixing/spreading epoxy. The edge is now ~1mm thick. If you like to scale it to increase size, keep the overall height at 3mm to maintain the edge of the…
Epoxy mixer tray and applicator for one time use. Stackable for easy storage of larger quantities.
This is a series of mixing cups with a spout shape so that you can pour accurately without product dripping down the sides. The spout is not too big so it doesn't interfere with complete stirring. I made them for use with 2-part resins,…
A handy little disposable tray and break away stir stick for mixing two part epoxy. Hopefully it will be more useful than popsicle sticks and a scrap piece of cardboard.
Just a simple mixing stick. Enjoy. Infill: 100% Category: Replacement Parts
Plunger for the RS Pro epoxy gun, to work with 3M scotch-weld 2-part glues like DP8005. I printed this standing up in Sunlu White PLA+ with a 10mm brim and supports for additional stability. I've included the bgcode for a Mk4.
Quick remix with a 45° angled end.
Epoxy Mixing Beakers I recently worked my first project that called for 2 part epoxy to be poured into the final project. The process requires little disposable containers for mixing the epoxy My kit only included 2 (that were) the wrong…
Glue mixing applicator sticks for epoxy. Seven various glue applicator sticks for epoxy mixing and application. They are 60mm long but they can be scaled to any size required in your slicer software. Quick to print. Printed in PLA with no…
Epoxy Tray & Applicator Set Overview: Introducing the 3D-printable epoxy tray and applicator set, designed for efficient and convenient mixing of two-component epoxy glues. This versatile set includes a tray and two spatulas (applicators)…
Plunger for the RS Pro epoxy gun, to work with 3M epoxies like DP2216. Can be printed standing up without supports!
I got tired of finding a toothpick or Popsicle stick and cardboard scrap to mix and apply epoxy. There are likely others here (I didn't look) but I like making things so I created this one. The OpenSCAD file is included so feel free to…
Mezclador para taladro diseñado para impresion 3D Utiliza una tuerca de 3/8" y una varilla roscada o tornillo de 3/8". puedes usar el largo de la varilla de acuerdo al uso que le des. Puedes limpiarlo despues de cada uso para seguir…
Babe, wake up, they released the 1x2 version. Same as the 1x1 , except it's 1x2. Still holds 10 trays
Stackable Epoxy Resin Mixing TRAY Glue Filler 40x50mm
When floating epoxy coat on a table top its hard to get the perfect thickness. The epoxy will self level but to get it really good you need to have a pretty constant thickness. I found some epoxy trowels online but they were only a few…
Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…
This is a credit card sized tray for mixing 2 part epoxy. It includes an integral tear-off mixing stick that conviently fits bak on the tray for storage after its torn away, just incase you want to reuse the tray. Ive also included a…
1x1 Gridfinity bin that holds 10 epoxy trays with a break-away stirrer
I will be glad to see you at https://www.instagram.com/3d.printing.ua/ Stained glass panels and the body itself are printed on a 3D printer, the panels are filled with epoxy resin, you can use ice tape as a backlight. Epoxy resin…
A drill attachment to mix smaller paint cans, resin or any other liquids. Measurements : 145x55x60mm / 180x55x60mm Remix of:
A small but hard test cube for multicolor prints! I created this cube for a video on the YouTube channel mpoxDE to test the Prusa XL. The cube contains some steep overhangs and areas that are difficult to print with the secondary color…
it is useful for mixing two part epoxies. However take care that the left over epoxies are removed immediately by applying some vegetable oil and wiping it off. it can be also used as a bowl, cat feeder, saucepan, planter, planter holder,…
Hello! i have been searching for something like this and i haven't found it, so decided to create it. There are 3 sizes of the beaker. Sizes should be around 100, 150 and 200ml to the line, could be scaled to be larger though. Base wall…
Stop ruining random pieces of cardboard when mixing 2-part epoxy! This ultra-lightweight (only ~6 grams) mixing tray prints in minutes and features a clever, integrated design perfect for quick repairs. Key Features: Snap-Off Spatula: The…
BOM 2x M3 washer 2x M3 nut 2x M3x25 (or longer) screw 1x 10mm steel tube (material does not matter, use whatever you have)
I often use small amounts of epoxy glue for various projects, be it to attach 3d printed parts or small repairs and such, so I made a small mixing tray with an attached applicator/stirrer. Dont now if anyone else finds it handy, but here…
Epoxy glue mixing tool. The maximum volume is 3 ml. But you can scale and create any volume. The printing time of one set is about 14 minutes. I print them myself in stock of 15 pieces at a time. Created in Shapr3D. Printed on Prusa I3…
Meant to process epoxy resin. PP recommended (will not degrade when being cleaned with acetone). Spoon volume ~ 2ml Total length ~ 150mm
Epoxy mixing spatula. You can use the rest of the filament spool to print some. Print instructions Category: Tools Summary Epoxy mixing spatula. You can use the rest of the filament spool to print some.
I printed this without brim, no support on a FDM printer. It didn't come out airtight, but that's fine for epoxy. You might need to adjust some of the parameters to make it fit, this is tuned for my printer. I've tested it, and it mixes…
Easy, quick print with a gorgeous product! TPU ONLY, other materials do not work for this. Fully reusable, can make tons with the same mold. I used Sunlu grey TPU, but all should work. My advice: Ensure that all submerged objects (if any)…
I lost one of spatulas so ı desined one of them before lost them all.
Increased the length by 25% and extruded it another mm. The thickness wasn't an issue for just epoxy but when adding a filler, the stick was a little short and bent a bit more than I would have liked. I'd recommend at least a 30% fill…
UPDATE: USE REV B Thanks to input from @Verender, added more tolerance between piston and body, should be smooth now. Aditionally cleanded up the model and added some chamfers for comfort Theyre quite a good deal if you can get your hands…
Gridfinity vertical holder for J-B Weld 2-part epoxy syringes - also includes a slot for the stir stick Based on Zack Freedman's Gridfinity parametric baseplate / bin model:…
Easy, quick print with a gorgeous product! TPU ONLY, other materials do not work for this. Fully reusable, can make tons with the same mold. I used Sunlu grey TPU, but all should work. My advice: Ensure that all submerged objects (if any)…
Just a simple mixing set for epoxy glue. Easy and fast printing!
It's a tool I use for composite work, very useful to make a proper fillet. Easy to replace after a few uses. Dimension: 50mmx50mm 3 thickness models are available. Fillet radius sizes: 1mm - 5mm - 10mm - 15mm onShape model link
I needed a tiny mix and pour cup for my two part RTV silicone rubber mix. Worked out perfectly. Set printer to Spiral Vase and you are all set to go!
Epoxy Spreader with 0mm - 3mm - 5mm Teeth Dimension: 50mmx50mm Useful tool for spreading epoxy over a surface to be bonded.
A small base for these useful epoxy trays to keep organised. Print instructions Quick 0.25mm layer height will do
I have made a bunch for a christmas project because there are several of these on etsy and I could not find files for them. I was not going to pay the amount they wanted and figured it was easy enough to design one and then allow everyone…
Finally I can mix with ease I always make a mess when trying to mix just a small amount of epoxy for crafts and small repairs. this mixer can attach to XIAOMI Mijia Electric Precision Screwdriver:…
These are a couple Epoxy cups that I used while building Rockets. Using the leftover filament that lingers, I size these up in my slicer based on my need and print. Typically, I keep the brims shallow to keep from overfilling and cooking…
Remix Epoxy Applicator Nozzle Remix of Original by Pevo on thingiverse Advice : print @ 0.1 layer height
Mixing tray for two part epoxy glue that is quick to print and can be reused or disposed.
I was working on a project and needed some mixing cups for epoxy glue. I didn't have anything around to use, so I decided to create a system I could print and store. Meet The Epoxy Mixing System it comes with small mixing trays, and a…
Been using pouring epoxy resin to cover PLA+ printed armour and helmets and stuff, was making a few small things that I wanted to coat in resin to be able to clean them easily and came up with this solution. No idea how many mils it is, I…
epoxy stand, no supports needed, bottles can be sored upright and inverted ready for use.
Perfect, for when you have to mix something that will ruin whatever you mix it on. Lightweight snap-off Spatula "Big" Mixing Area Only 6g filament Measurements Tray: 60x40x4,5mm (56x36x3mm mixing area) I also made the spatula available on…
The trays have a special feature: they can be clicked into the indentation of the lid, where they are held securely for easier mixing! Set includes three different versions of the lid: two labeled for 2-minute or 5-minute epoxy, and one…
I always have a lot of epoxy but no stick nor bowl to mix it. So, I made it for a simple and fast PLA print. 0.2 mm Layer height, 100% infill, default speed: prints in under 1 hour. Probably the small container is big enough. The big…
A mushroom brush is of course a brush for cleaning mushrooms. This one is a mushroom-shaped mushroom brush, but that doesn't make for a great title. Somewhat unusually, the design includes 3D printed bristles. Very cool on one hand, but…
Overview I've always needed a soap dish in my kitchen to hold soap dispensers and help the excess water drain into the sink. The problem with traditional 3D printed soap dishes is that a 3D printed plastic part is not exactly waterproof…
I use two part epoxy alot, I buy big sized tubes and they come with one small tray and one spatula. I decided to design a base where you apply tape to the tray, mix your glue, glue what you need to using one on the spatulas, after use,…
Simple pair of pusher for 50ml epoxy glues. No supports needed, print upright.
If you loose the Bison Epoxy cap you can print-it :) Enjoy
Epoxy resin mixing tray fast glue filler 4x5cm
Sometimes you'd want to use your epoxy to glue something, but all you need is just a droplet ora a small amount. Print a small spatula with two different size tips. and 20mm and 40mm bowls. Design file included in case you need different…
Chisel Tip Version version of the old one
The measuring cups are intended for small quantities of Eroxyd resin and hardener. These are difficult to weigh on the kitchen scale. The color change orange/grey and grey/black corresponds to a volume ratio of 45:100 for hardener/resin.…
Backstory I recently bought a set of soap, shampoo and conditioner bars under the assumption that they would be easier to transport for traveling. However, I soon discovered that if the bars are not dried properly, they will smear in any…
I like to mix epoxy on a non porous surface. I used to use glass but as left over epoxy builds up it gets more difficult to mix. I included a photo of my old mixing tray. My tray uses parchment paper as a disposable liner. You can use it…
Stores 2k epoxy syringe + spatula for mixing + mixing area in front. Size is 5x1x4.
Stackable epoxy mixing bowls are single-use containers designed for mixing epoxy resin and hardener. Their stackable design saves space, making them convenient for workshops and craft projects. Ideal for precise and clean mixing, these…
You need 4 magnets with 6mm in diameter and 3mm in height. Be careful not to glue them into the wrong holes in the lid.
Just a simple stand to hold 5 min epoxy bottles either upright for storage or inverted for use. Has a removable drip tray sized for 36mm painter's masking tape. This was inspired directly by this great model…
Simple set of a little bowl with a matching scoop. Easy to print, radius of the scoop matches the bowl to get everything mixed properly. /German/ Einwegschale für die Verarbeitung von 2K Harzen mit Rührstäbchen. Rührstäbchen hat den…
Silicone/Epoxy Mold for geometric stand for MacBook Pro by Thmsdc (https://www.thingiverse.com/thing:1330829) First time trying out resin casting; steps: Print model in PLA Cast printed mold with silicone. This results in a silicone mold…
Ich habe am Fusion 360 eine kleine Spachtel entworfen, da ich zu Weihnachten Zuckerglasur auf meinen Plätzchen verteilen musste. Sie eignet sich auch sehr gut, zur verarbeitung von Epoxidharz. In meinem Profil finden sie dazu eine…
This is a caddy for storing 5-minute epoxy that comes in two bottles. It fit two 4 ounce (118ml) bottles of Loctite brand epoxy from the home center. Other brands had similarly sized bottles as long as they are less than 43mm in diameter.…
Print in TPU, unscrew the epoxy cap and insert the retaining ring, then reinstall the cap. Never lose the cap again! I printed this 6 months ago and it's still holding up. Modeled by hand in 3D Studio max
Adjustable stands have a standard drywall/wood screw hole in the top and bottom sections for mounting of the workpiece if needed. These are great for painting or epoxy pours for tables that need to be 100% level. Placing the stands under…
Just a small tray to mix the epoxy glue that can hold the spatula too.
A storage solution for epoxy glue that includes places for mixing sticks and disposable mixing caps. (I recommend recycling the caps of milk or juice bottles for this.)
Adapted for skadis board to hold 2 epoxy syringes for JB weld but might work for other brands.
This is a notched trowel for the final hard coat of an epoxy table. Made with 1/8" x 1/8" grooves for a smooth and level finish coat. I couldn't find one out in town made of a softer material (don't want a metal one that might leave…
![Stackable Epoxy Mixing Tray [3.6g]](https://media.printables.com/media/prints/80602716-8b7f-4593-bdac-4f2ea6e558af/images/13502461_22b24bcb-4e55-4ddd-b8ca-cb3751a5364b_fda3fa44-8663-4b8f-9dbe-63d2bad1b503/img_4268.jpeg)
