743 models
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Print approx. €1.55–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
About This Remix: This is a remix of the Sith Acolyte Mask (Star Wars) by Killonious . Killonious did a wonderful job designing the mask as a prop display mask. They also have an etsy shop . I made this remix because the mask was…
Print approx. €15.07–€18.42 excl. taxPreliminary estimate for one variant
Optional addition to RepRack , default configuration comes standard on all RepBoxes v2.3.1 and up . The slip rod allows for much more lubricity than just trying to pull a filament spool on a piece of pipe alone. In addition the ribbed…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
RackStand option for RepBox and RepRack systems. Also compatible with RepWinder and now allows you to use with v2.3.1 and up RepBox with slip-rod system. Open source 3D printable, laser cuttable, or cnc files and original Fusion 360 files…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Some practice rings to improve your darts focus! ;-) Enjoy!
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
RepRack is BACK! Quick Overview: https://www.instagram.com/p/DZ07thcPyC0/ RepRack2 Features: Fully Reversible: Suspension style OR under mount bracket (corbel) style. Still good for filament but now you can easily make shelving too!…
Print approx. €6.00–€7.34 excl. taxPreliminary estimate for PETGSource material: PET
A shelf designed for the RepRack: Open Source Spool Holder And Storage System by Repkord ( https://www.prusaprinters.org/prints/129024-reprack-system-by-repkord ). If you print this without top or bottom layers you save a bunch of…
Print approx. €5.83–€7.12 excl. taxPreliminary estimate for one variant
Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Based on the dimensions from a store bought set. I haven't actually printed this version, the version I printed has 1mm holes and they turned out a bit small so I increased to 1.2mm and did a bit of alignment. I have included the Fusion…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Bust of Louisiana Creole practitioner of Voodoo. Also included are Planter Versions. Note: Some of the files are for just the bust and some files are for the Planter version. Stunning. One of my favorites.
Print approx. €12.48–€15.26 excl. taxPreliminary estimate for one variant
Simple mix of two great systems - RepRack and Honeycomb Storage Wall. I have RepRack next to my printer and the area of the RepRack hanger was bit unused and HSW was the best choice to adapt these two systems. Original HSW Base is 8mm…
Print approx. €4.60–€5.62 excl. taxPreliminary estimate for PETGSource material: PET
If you want to practice throwing cards, then this is the best thing you can print, the plastic is much stronger than your ordinary playing cards and will not get destroyed as quickly. Its the best solution in my opinion to learn how to…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
I’ve transformed the iconic Benchy into a fully functional pencil sharpener with a hidden twist! The goal? Keep the classic boat look while integrating a discreet sharpener under its removable roof. 🎨 Clever Design: The cabin is fully…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
I have only printed in PLA so far, but will try PETG. Print settings (CURA) 5 walls Slicing tolerance exclusive 20% infill Assembly is fairly straightforward, the spinner body can hold 2 AA batteries for a counterweight but other heavy…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
Practice mute for brass instruments. The print contains two versions , one normal version for trumpets and smaller bore instruments and one large bore version for large bore trombones and their like. Printed in PLA with 0.2mm layer height…
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for one variant
Let's show RepKord some good love here and show off that logo! All your friends will be jealous when they see it pop out and they will say “Wish mine looked that good”. I remixed it to include two color changes so you have a three layer…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to the friends and genius who helped
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
The RepRack Table Top Spool Holder is great, but the two pieces of the model are joined. I wanted to print the pieces on my Prusa Mini+. The objects have been separated so that you can print them on at a time on the smaller build plate of…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
IKEA PAX Mouse Holder – Stylish and Practical Accessory Storage Keep your workspace clean and organized with this custom-designed mouse holder, perfectly compatible with the IKEA PAX wardrobe system! This holder allows you to neatly hang…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
soap table for Grohe shower set
Print approx. €4.27–€5.21 excl. taxPreliminary estimate for PETGSource material: PET
Storage tube with profile of a classic Valentine's Heart. Designed in FreeCAD using B-Splines. Since these can not be given an offset in FreeCAD, the master was copied and manually scaled as required. Wall thickness on the "Innie" is…
Print approx. €7.82–€9.56 excl. taxPreliminary estimate for PETGSource material: PET
Practical pot support to keep pot base out of the water when using a deeper layer of water in a humidity tray. Easy to scale up and down in XYZ to suit your needs. Can be done with 10% infill, but bridging for the cross-cut on the bottom…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
Key fob with compagny logo Practeo
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Customizable Filament Labels for RepRack Storage Keep your 3D printer filament collection organized with customizable labels designed to clip onto 1/2-inch EMT conduit used with the RepRack filament storage system . These 3D printable…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Aktualizace 15. 10. 2026: přidány soubory pro dvoubarevnou variantu (Prusa XL 2T) a tiskové soubory bgcode, doplněn seznam filamentů a nstavení tisku. Geometrie kostky se nezměnila. Hrací kostka na osobní zájmena v němčině: ich, du,…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Žáci vytvářejí pomůcky, které jim chybějí při výuce pracovních činností, jako jsou úhelníky, šablony apod.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Vytvoření 3D modelu z projektové dokumentace RD zpracované v SW Archicad. Výstupem je návod na převedení projektové dokumentace .pln do souboru .stl a následný export do souboru G-code pro 3D tisk.
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
Vytvoření pomůcek pro podporu výuky v předmětech: Přírodopis, Matematika , Fyzika , Zeměpis, Chemie, TV/Sport, Pracovní činnosti Využití 3D tisku ve spojení s výukou informatiky/ pracovních činnos
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I wanted a version of the XL Reprack hanger that supported from underneath more like a corbel. And so the inverted version was born. This opens up some really interesting possibilities for mounting machines and larger, heavier objects to…
Print approx. €9.57–€11.69 excl. taxPreliminary estimate for PETGSource material: PET
OpenVessel 2.0 is a redesigned benchmark model for testing your 3D printer’s capabilities. The original was scrapped to make this version unique and functional without resembling Benchy. It’s simple, effective, and even floats upright in…
Printable without support. Holes for microphone included. Filament need 12m (2 perimeters 15% infil). Versions A, B, C, D, I, J, K, L, Q, R, S, T…..For phones with cover, max phone depth 21mm E, F, G, H, M, N, O, P, U V, W, X…..For phones…
Stop it! Yes, I'm back with more bad puns and a useful print. This practical, easy-to-print design was something I threw together in Fusion 360. I didn't want a Hodor (sorry) or a solid doorstop. Instead, I wanted something that would…
⚠ Designer’s Note This model was originally created for the Prusa MMU2 to add light filament tension and reduce slack without a buffer. It still works as intended, but there are now other community designs that perform better if you need…
🐾 Black Cat Bag Clip – Playful and Practical Add a touch of humor and charm to your kitchen with this whimsical black cat-shaped bag clip! Designed to seal bread bags and other packaging with a cheeky twist, this clip combines…
RepRack Stabilizing End Caps These end caps help stabilize side-to-side movement of your spool storage when not using Rod Clamps. These end caps provide a nice finished look to your RepRacks. Designed to fit snug on your ½" EMT Conduit.…
If you are one of the billions of people who keep their toothbrushes in a cup, put this functional model in your print queue. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a…
This is an isometric practice worksheet with matching 3d models. The models use ¼" as 1 line length on the worksheet. The model “all isometric shapes” has them all within a 4.25" x 4.5" box. I included a STEP file of the group if anyone…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
3003 Fantasy Bits Mega STL Collection on Kickstarter 🔥 Want to stand out in the 3D printing market and attract more customers? 🔥 Sell unique, stylish, and modern 3D models with a commercial license – no restrictions, full freedom! 💸 Why…
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
There are many suggestions on what a good box for metal drills should look like, but none of the ones I found had all the requirements I was looking for. It had to be a simple design, with clear indication of size, small drills from left…
This is my variation of ANicolai's “ Mute for Violin and Viola .” Printing in various PLA+ as oriented without support. .16 layers, 4 walls and 80% infill. We tested these against an actual an metal practice mute. It actually stacked up…
Here is a practice fishing plug. Print Settings Printer: Ender 3 V2 Neo Rafts: Yes Supports: No Resolution: .02 Infill: 100 Filament: NOVA Maker ABS Orange Notes: If you print at 100% it will be approx.11 to 12 grams which is about 3/8 of…
Holder in two versions: single fake nail (prints in under 20 minutes) Up to 5 fake nails I'd recommend using 4 walls, the rest works with standard printer settings. If you print this model, don't forget to post a make :D
Tired of constantly tripping over swords, or looking at that pile of swords laying in the corner? Look no further for your sword management system then this wall mount for swords! Print instructions Supports are needed.
In Germany its very hard to find 19mm outer diameter pipe. So I decided to make a 20mm version. The holes are 20,5mm diameter. First try with 20mm holes was too tight and difficult to assemble. I recommend to print first the test part to…
Since EMT is hard to find in Germany I re-designed the hangers so they can be used with the IKEA HUGAD curtain rods (28mm - version || https://www.ikea.com/de/de/p/hugad-gardinenstange-weiss-10217141/ ) Designed so that two pieces (mirror…
12 ga 2.75" Practice round, dummy shell If you want to use this to practice loading i would print with a heavy wall count like 2.4mm, no infill, then pause it right before it prints the top and put some weight in there so it has the same…
Pencil holder shaped like a TIG torch to help practice, or just to show off how much you love welding
The SnapRack system is designed to easily reconfigure your sample handling rack on the fly to suit the needs of your current task. It fits 1.5, 2.0, 5.0, 15, and 50 ml tubes/falcons. Whether you want to pipet a master mix from a 15 ml…
If you like this design, please leave a like, download the model, and follow me for more practical and stylish 3D-printable designs. Your support helps me in the competition and motivates me to create even more useful models! Organize…
This quick-print model lets you practice your Heat Set Insert skills. Print a few, and practice inserting the Heat Set Inserts! It's designed for M3 inserts with a 4.6mm outside diameter, and up to a 6mm depth.
DIY Doubled Up! Remixed version of "RepRack" filament storage system that stacks 2 rows of Filament spools atop of each other. Designed to sit on a shelf or shelving unit. Uses 1/2" EMT conduit as the "Rack rails" of the system. Requires…
Turn any carpet into your new practice green! This easy and quick print lets you turn any carpet into you new practice green. I enjoy using it, and tossing it out like a frisbee to end up with a new random hole distance for practice.
EagleBalls - Golf Practice Balls A simple practice golf ball that won't fly far. Practice in the yard, at the beach, or in a parking lot (hitting off a mat): the world is your practice course! Print it with glow-in-the-dark filament to…
Simple and fast to print. Can easily be printed in batches. It doesn't get any simpler than that. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs,…
This is a playable uilleann (Irish) bagpipe practice set. It contains all the printable parts you need to build a practice set. I don't yet have good assembly instructions. Please email or message me if you'd like personalized assistance…
Verg good for practice. For best results print in TPU but it can still be printed in other filament. Just like a golf ball but it does not go as far.
70A Filaflex Black Ultra-Soft, 1,75 mm By Mirdos
Sorry in advance for the mess, this is just a quick post with some bad pictures of a design that I made in 2022 and never 100% prepared for release. I just found it again and thought it would be a waste to not post it to the community in…
This endcap adds 1 inch to the end of a RepRack. Helps in situations were you may want to squeeze in one more spool. Also ascetically adds a nice finishing touch to the RepRack! Sizes included: 18mm (Standard/USA) 20mm (German) Buy me a…
Donald Linsay designed a mini bagpipe chanter in high G, and I wanted to print it as a practice chanter so I took the top file from Kadaku's practice chanter and resized it to fit, and I also took the printable reed parts to make my…
Just a bunny.
This remix has a toothed grip on one side more suited to carpeted floors. Prints on the side (teeth out), like the original, with no supports.
Stylish and Practical Cigarette Case for 3D Printing With this self-designed cigarette case, you always have your cigarettes stylishly and safely at hand. Design: Sleek and modern design fits perfectly in any pocket or handbag. Compact…
Regular print setting 0,2 layer and no supports should be ok, but feel free to experiment This thing definitley has more lift than just a stone or ball… just give it some rotation and good angle :) Disclaimer: Should fit in all cd-dvd…
Small 1:1 scale practice modeling - MK8 Hotend with a 0.4mm nozzle. Screws and threads modeled.
This is a 60.86 mm diameter by 352.49 mm high model of the M38A2 100 pound inert practice bomb. This was filled with sand and sometimes a small marker explosive then used during target practice in the forties and fifties. The originals…
A compact, detailed model of the L1 lumbar vertebra , designed as a small anatomy reference or unique medical-themed keychain. This model balances recognizable anatomical features with clean, support-free printing, making it ideal for…
This Box Opener is a practical and sturdy tool for everyday use. Ideal for cutting through tape, boxes, or other light p
Print using approximately 25g of filament, fill with 21 pennies to reach standard empty magazine weight of about 71g
It's a mini-billboard to practice graffiti, not accurate to image
I love my RepRack --it lets me have 8 linear feet of storage up above my closet doors, making use of space that would otherwise be wasted. However, I live in Southern California where we occasionally have earthquakes. While we all fear…
I designed this to ensure that my EMT was aligned correctly on both ends and to keep me from sticking my fingers into the sharp hole. Note: The picture is from an earlier version where the screw holes were blocked on the outside face…
my version of the butterfly knife took some time to get the weight distribution right but it now works well I printed mine in PETG and used a section of filament off the spool to act as the hinge pin on both handles to add some strength
9 hollow golf balls great for practicing and more
I made the club bigger and made the hole to fit a normal golf club shaft. same setting as OG model.
Detergent Powder Container & Dispenser Practical container with integrated mechanical dispenser for powder detergents. Enables clean, accurate, and repeatable dispensing. Suitable for placement on a washing machine, shelf, or in a…
Enhance your child's dexterity while having fun with our 3D printable animal shapes! Designed for sewing practice, each shape features easy-to-use border holes, making them perfect for little hands learning to stitch. Ideal for beginners…
made a filament spool roller that just snaps on to the conduit and since they are separate pieces should fit any width spool. included is also a ptfe bowden tube mount and a magnetic coupler so the printers PTFE tube can be moved to a…
The Guitar Practice Fretboard is designed for practicing guitar chords and notes. Beginners can use this fretboard to practice chord finger positions anywhere without needing an actual guitar. By using your old guitar strings, you can add…
Cyklonový separátor prachových částic při odsávani vysavačem. Šetří prachové sáčky do vysavače. Nutno použít nádobu na prach / Cyclone separator of dust particles when suctioned with a vacuum cleaner. Saves dust bags for the vacuum…
This mounts to an xbox style wireless controller. It maintains the right joystick control in a centered position while allowing backward and forward motion only. This allows for an easier good swing in the advanced modes. (e.g pro). This…
If my understanding is correct, the original rod clamp is designed to let screws dig into the rod itself, which does not apply well to steel rods. So I made this version that tightens its grip using a 10mm M3 screw and hex nut. My build…
Practice Stick Plane - print in place Category: Vehicles
These finger cymbals are also called zills. It is a suitable choice if you are an oriental-style dancer and want to practice without making too much noise. You need to print them in pairs and add elastic bands for your fingers.
Please be aware this is a remix of the Repcord RepRack , although this is marked as not to be remixed, the creator has said in comments that remixes can be shared as long as Repcord branding is left on the model. Here in the UK it is…
Hello, i designed a simple pin organizer for the pins of locks. Enjoy :)
Modified RackRoller for RepRack that uses threaded inserts and M3 screws. Also added was mount for 4mm reverse bowen tube Didn't have the threaded forming screws so I made this which uses the same threaded inserts used in the Voron…
3D Scan to Editable CAD – Fusion 360 Practice Full step-by-step video tutorial: These are the downloadable files used in my 3D Scan to CAD / Reverse Engineering Fusion 360 tutorial . The goal of this exercise is to use a scanned 3D mesh…
The wall mount needs to be used with the other parts from the original RepRack system: https://www.printables.com/model/129024-reprack-open-source-spool-holder-and-storage-syste The original model single wall mount is meant to be used…
A simple case for Sparrow Practice Locks inspired by https://www.thingiverse.com/thing:4955652. There is an OpenSCAD file you can customize and I have uploaded both a 4-lock version to hold the standard Progressive Lock set as well as a…
After looking at all the practice pads available, none of my liking were within my prince range. So after some thinking I came up with this design that allows you to mount a 10" mesh drum head to the shell and tighten it with the rim…
Introduction This is an alternate approach for supporting the Modular Wind Tunnel for STEM Education on a tabletop. The default stand included with the main tunnel uses discrete printed feet. While these are simple, fully printable…
📄 Description: This is a fully 3D-printable clarinet reed designed to work with a standard Bb clarinet mouthpiece . Made from PLA , this reed is surprisingly functional, offering a playable experience for practice, testing, or…
These tissue box holders perfectly fit commonly available rectangular tissue boxes (e.g. Tempo). Comes in 5 fancy designs! Simple grooves printed in place for easily sliding in of the lid.
Intro This is a simple locking add-on for RepRack builds using the single wall cleats. Add it on once the hanger is installed to keep the hanger locked into the cleat. Easy to install/remove and needs no additional hardware. The EMT…
A simple model to test the quality of brass inserts and practice for people who have never used inserts before. I recommend using a soldering iron and the insertion tools by ruthex…
