35 models
Though by design in order to keep bulk and weight to a minimum, the original model was quite flimsy and susceptible to breakage (especially when interacting with the button). Note : There are two versions of the “Slim” case that…
This case is designed to fit the Proxmark3 Easy (from Aliexpress or dangerousthings) like a glove. As such it has pretty tight tolerances. Print it standing on the “nose” with a 0.4mm nozzle. Walls are 0.8mm so it basically only consists…
This is a redesign of my Slim Case. The original stayed true to the shape of the PCB, but that made the HF-Part a bit hard to use with cards at times. The HF-Cards also don't need to be that close to the Antenna, so I just extended the…
Modified shallax's design to fit larger USB cables (I couldn't get any to fit in the existing model) and trimming down the support brace as it extended too far for me and wouldn't let the lid close. 3 file options for case, lid, or case…
I purchased a Proxmark3 easy recently from Aliexpress and the old cases won't work since there are several differences: Front part of new board is longer so the lid needs to be adjusted Usb and button are farther apart Button and side usb…
I slightly modified @MakenModify_170962 's Proxmark3 Easy Slim Case to fix a few minor problems I have with it, full changelog below. The biggest improvement I have made is to enlarge the cutout for the side button so you can actually…
This is a box to fit a proxmark 3 easy. lid snaps shut and holds well. You cant use the proxmark while it is in the box. As this was made to be strong and carry the proxmark around. Top and bottom surfaces are flat. So you can use any 3d…
PM3 clones like mine may have size variations vs originals I believe as it couldn't go any further even if I wanted to.
No supports needed 0,4 Nozzle Made by @Antonio36996 from HackCS
Worried about snapping your Proxmark3 antenna off whilst it bumps around in your bag? This is the case for you. No openings whatsoever aside from the lid, which is held on with some ratchet teeth. Print Settings These are the settings…
The cutouts for buttons and switches may look oversized, but making them any smaller makes them very difficult to operate. Print with a 0.4mm nozzle. For the main body, print standing on its open end. For the lid, print on its face. The…
This is a remixed version of Proxmark 3x Case by Hamspiced . I removed the lettering as they were a little too deep and caused holes in the case.
A high quality case for your Proxmark 3 Easy. Extremely precise with no rattling or loose parts. Warning! The fit is extremely tight, so you may need to force it in a bit. Some variants of the Proxmark 3 Easy may have different screw…
You can add fuzzy skin like i did in PrusaSlicer.
This board allows for secure mounting of your Proxmark3 RDV and its two coils. Print this model using 0.2mm layer height - this will allow for hole supports to be correctly self-supported by a single layer bridge, that you will need to…
This model is supposed to expand the use of the ProxMark3 Easy by making it more common in your work environment. 🏢 I need to say, before installing the ProxMark3 Easy on the model, you should first remove the middle layer of the…
Redesign of @MakenModify_170962 "Proxmark3 Easy Slim Case without Bump" To better fit my proxmark3 easy
Just another Proxmark 3 Easy case. However, this case is not as flexible as others and does not require any screws. There are two variants of this case: One has a mount for an micro-USB to USB-C adapter added (, as I like to travel with…
Remix of a Proxmark3 Easy Case Lid for better fitting of a larger usb cable.
A 3x2x3 Gridfinity tray for the Proxmark 3 Easy NFC development board.
I wanted a quick case to protect the RDV4, as well as obscure it a little. Many 13mhz cards/tags need some space away from the antenna to read consistently. This case provides the space required, as well as a flat surface, for me to get…
A themed case for ProxMark 3 Easy boards. With the release of the Wayfinder, many crystal makers are shuffling to be compatible. This case protects your board while having a universe friendly look. The print ready files are presliced for…
This will only fit Pm3 Easy devices that have two ‘layers’ of PCB. Either there can be no midboard, or the midboard has been moved or replaced in such a way that the device is slimmer only using one layer of standoffs. This is not…
Proxmark 3 Slim print in place case. VERY rugged PM3 case for a PM3 slim mod. To use this case; solder the LF coil to the screw posts and place it onto the PM3. Pause the print right before the top layer and drop in your pm3. Enjoy.
This SKADIS mount is specifically designed for the Proxmark 3 Easy (China Version), providing a practical and efficient solution for housing your device. Crafted with an emphasis on functionality and ease of use, this mount allows you to…
Motivation Finally made a case for the classic Proxmark 3 RDV2 - a device I still use and always wanted a suitable case for. Bill of Materials 14x M2x5 self-tapping screws e.g. from this set at amazon 5x M2x8 self-tapping screws (1x for…
This custom Proxmark3 Easy Holder is designed specifically for the Proxmark3 Easy with the Strong Case ( https://www.printables.com/model/486986-proxmark3-easy-strong-and-slim-case ). It fits securely on the IKEA SKÅDIS pegboard,…
Added new version of the lid for new board revision slim model + board with button cover. Unfortunately 2nd USB is not accessible as in original model. Print the case with tree support on build plate only for better separation.
Inside is 8mm or 7mm thick for a bit space / tight fit.
This is a replacement for the original antenna cover, which is made out of silky plastic that gets melty after a few years. It's not quite so perfect, it's not trying to be 1:1, and it doesn't fit as satisfyingly as the original. I think…
Simple enclosure for The Proxmark3 PM3 Ultimate Edition Proxmark3 PM3 Ultimate Edition is an enhanced version of the PM3, featuring an LCD display and supporting/emulating Chameleon
A high quality case for your Proxmark 3 Easy. Extremely precise with no rattling or loose parts. Warning! The fit is extremely tight, so you may need to force it in a bit. Some variants of the Proxmark 3 Easy may have different screw…
Motivation Finally made a case for the classic Proxmark 3 RDV2 - a device I still use and always wanted a suitable case for. Bill of Materials 14x M2x5 self-tapping screws e.g. from this set at amazon 5x M2x8 self-tapping screws (1x for…
Simple enclosure for The Proxmark3 PM3 Ultimate Edition Proxmark3 PM3 Ultimate Edition is an enhanced version of the PM3, featuring an LCD display and supporting/emulating Chameleon
