42 models
A case for the awesome and affordable DPS5005 Power Supply: https://www.banggood.com/RD-DPS5005-50V-5A-Communication-Function-Constant-Voltage-Current-Step-down-Power-Supply-Module-p-1161704.html?p=2@3021069489201207MV It has support for…
I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…
A 3d printed case for the popular DPS5005 running OpenDPS. I CNCed the side panels from a 1/8in acrylic panel. You can also 3d print them if you want. Follow the Datasheets to get the correct connector housings and terminals to interface…
Remixed the CoolDPS case. Change log: Customize Boost converter support to use the 150w boost converter I had laying around. Add more vents above boost converter. Change front and back panel to use DC jacks and Anderson powerpoles (I have…
This model is a remix of https://www.thingiverse.com/thing:2975884/remixes It has an improved ventilation holes on the back because the last model suffocated. I have also removed the banana connectors on the output and left only the…
A tiny, portable adjustable power supply based on the DPS5005 power supply module. Input power is provided by a USB PD trigger module. I used this one in the “High Voltage” variant which can go up to 48V with USB PD 3.1. I suggest…
This is my interpretation of what a DPS5005 case should look like. I wanted a smaller case than was typically available. Although you need to print this with supports, they are very easily removed. Print the models the way they are…
I modified to PSU Case to fit a cheap USB-C power delivery decoy module like https://www.aliexpress.com/item/4001253821461.html with a DPS3005 and it's USB-Controll-Module (e.g. https://s.click.aliexpress.com/e/_AmyMWd ). Build is…
Power supply using two DPS5005 units, and a 48V DC power supply unit. It requires a handful of other components that you can easily get from a local electronics store or on line (binding posts, power inlet etc) The PSU is an S-500-48.…
Housing that is just big enough to fit an old laptop power supply and the DPS5005 . The laptop power supply can only output 18V / 3.25A, for my normal electronic projects that is plenty enough. I Have a 50V/5V version, but the main…
Modified 3D model that allows adding a fan for better cooling. Due to the use of the power module RK6006 with bluetooth, the possibility to add a USB module for communication was removed, which in turn made it possible to add a 3006 Axial…
This is my first design of a bench power supply base on a DPS5005 and a 36V 5A Power Supply Module. Update: 03.10.2022 I have added a V2 Version of the two part. They are much stronger and the fitting of the power plug screws is better…
This is an enclosure for a DPS5005 voltage converter with Bluetooth and supply board 230V AC to 36V DC. For higher load of the DPS a fan 60x60x15mm was installed, but I also provided a cover without fan. The fan cover is for the inside,…
Overview: A 48V AC to DC power supply supplies the DPS5005 module with power. The module outputs via the two binding posts below it. An additional 5V power supply outputs 5V via two USB A connectors (this PSU is housed inside a small 3D…
This is the front and back panels for the factory-made case Kradex Z4AJ . Sorry, I don't have top and bottom parts, you can buy the case if it is available in your region (Europe probably) and replace the front and back panels with…
This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one: https://www.amazon.de/gp/product/B077NZF6DZ The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The…
Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…
TiltBox for DPS5005 Simple and functional enclosure for the DPS5005 variable power supply, designed to make it easier to use and look good on your workspace. Features Angled Display : The DPS5005 module is tilted for better visibility and…
Simple box to hold a DPS5005 (link here: DPS5005 ) on a DIN rail. I mounted all my tool holders and stuff with a DIN rail on the underside of a custom made bench, so I needed something to hold everything on it. The banana connector used…
I designed two halves of a power-supply cover for the DPS5005 and DPS5020 from Ruideng (RIDEN, RD TECH) which fits perfectly with the 200W, 48V switching powersupply from Velika. As powerswitch, I am using an Inlet Combi-Module C14 with a…
This case holds the power supply at an angle for desktop use. There is a spot on the back for an XT60 connector for the power input. There are two holes on the front for banana screw terminals for the power output. There is a spot in the…
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
This project was on my backlog for a while…. It's cute little bench PSU with main goal being powering some electronics projects, dev. MCU boards and other low voltage stuff. I had x1 DPS5005 laying around, but wanted at least x2 channel,…
POCKET SIZE 3D PRINTED ENCLOSURE Enclosure was design for DP modules like DPS5005, DPS3003 The ones without additional board. I decided to add small fan, but the board dont requaire one, so this is optional. As you seen on pictures, I…
Module case for several power supply modules (DPS5005 / XYS3580….) There a two version (with or without space for external power supply). Version1: Bottom_Part_placeholder.stl + Upper_Part.stl An old power supply (e.g. from and old…
This is a pegboard mounted power supply using a DPS5005 power supply module. This is designed to be as compact as possible, so you don't have a ton of room to work inside. You should wire everything up before you put the module in, since…
Simple but powerful laboratory power supply from two DPS5005 modules and 47V industrial LED power sources. 2019-01-18 Added modification for single DPS (vertical and angled variant) Print Settings Printer: Molestock Rafts: No Supports: No…
Main DPS unit: DPS3005, DPS5005 Female banana connectors: standard ones should fit OK Speaker spring connectors: standard double pole version 5521 DC jack: again, standard ones that look like this (approx. 9mm x 11mm x 14mm)
I made yet another DPS 5005 box. Tried to make it small. Uses an HP/DELL power connector. You can find it on Aliexpress for few bucks for 10pcs. The wires from the connector have to go directly to the back, flat with the bottom of…
I wanted to have a compact case for my DPS5005 Lab Bench Supply powered by a Meanwell RSP-200-48. the halfes can get screwed together, but for stationary use the friction fit is sufficient. It also features litte balls as feet, and…
I remixed the original backpanel to accommodate a female XT60 connector, so that I could use the DPS5005-based PSU with https://www.printables.com/model/322597-lrs-200-power-sleeve that I have built quite some time ago as a universal…
A case for the DPS5005 USB C Adjustable Power Supply to safely carry it around in your backpack or similar. Print in medium to hard TPU (I used 95A) so the case is slightly flexible but still robust and provides impact protection. The fit…
Remix of a DPS 5005 Case. Added DC Connector with 11mm diameter. Added cutout for USB Controlboard. Case is 30mm longer.
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
Replacing the most worn gears for the shredder Peach PS500-46.
Psu holder designed for Yamaha PS500 keyboard and its stand. No need for tape or supports.
Designed for Yamaha ps500 keyboard and its stand. No need for tape or supports but may need resizing depending on your printer tolerances.
This is a dps5005 based power supply with integrated 36v 3A Delta power brick and a 30mm fan. It probably does not fit for you but i include a fusion360 project file. Usb connection is also supported and the cooling is good enough for…
Description A tiny, reliable and cheap power supply based on the DPS5005. The backplate also features a space for the USB Expansion Module. The input supply of the powersupply is done via USB-PD Trigger module. Parts A list of needed…
Deutsch: Remix von: https://www.thingiverse.com/thing:2951395 Ich habe es bearbeitet für Rechteckige Kippschalter: (19,2x12,4)…
Parts and Features This is a box to mount a DPS5005 Buck Converter Variable DC Regulated Power Supply. It includes two 50mm spaced M6 or 1/4-20 clearance holes at the bottom for mounting to an optical breadboard or table. The model I used…
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V…
