Counting matching models…
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
Here are the files for Gourdo the Pumpkin. a cute little pumpkin for your Halloween decorations. you will need a little support for this pumpkin, but I painted supports on the teeth and eyes to avoid supporting the whole pumpkin. The…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
🎃 Pumpkin Spiral Fidget Toy – Twist Fun for Halloween - now with Ghost! 👻🌀 Here comes something else for Halloween or Thanksgiving: a pumpkin with stem and leaves that comes with a special twist ! The upper part can be turned out,…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Because those metal needles break quite easily, I needed a quick solution to inflate one of our kid's toy basketballs. There are two version: with a DIN VG 5.2 thread, which can be found on most ball pumps with a thread like Schrader…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
No brim or supports required. The Twisty Pumpkin Fidget Toy is a fun Halloween-themed fidget made from 9 nested pumpkin segments that can move independently up and down. Push and pull the individual sections to transform the pumpkin from…
Print approx. €3.81–€4.66 excl. taxPreliminary estimate for one variant
Created in Rhino3D, this pumpkin bowl was made to be printed in Vase Mode/Spiralized Outer Contour. I included 3 different gcode profiles of the three sizes seen in the picture: 125% 100% 75% I found that those sizes create a nice display…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
An almost flat card that quickly assembles into a cute pumpkin. Choose loose or as a card.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Sliding+Legolini+-+Pump-Action+Repeating+Mini+Bow Prusa Mini version This is only a remix of the original made to be printed on Prusa Mini Original by Łukasz Janikowski Print instructions Made for prusa mini printer. Print without…
Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
jack skellington pumpkin three-part, outer diameter approx. 85mm Scalable up to approx. 50% 75% for use with normal LED tea lights. The upper and lower parts require a support structure for printing. Print alignment as specified in the…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Pumpkin lamp for table decoration e.g. on Halloween. !!Attention only use with electric tea light!! The tea light I use is 45mm by 45mm by 45mm in dimensions and fits easily. Works absolutely great and looks great. I uploaded two variants…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
4mm base with 0.8mm lettering sticking out Strong keychain i Put 100% infil for better strength
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
I've attached the .stl file if you want to slice it yourself. I also attached the gcode I used to print the pumpkin in the images. My printer has a CR Touch, if yours doesn't, you can edit the gcode in notepad. Remove “ M420 S1 Z2 ; Use a…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
You do not know what to print for Halloween? How about this Halloween pumpkin with lid, big enough for one or 2 LED tea lights. (ex: https://amzn.eu/d/cHnOr0r) Dimensions: Diameter approx. 101.20 mm Height approx: 90.06 mm Printing:…
Print approx. €7.43–€9.08 excl. taxPreliminary estimate for one variant
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
Print approx. €6.52–€7.97 excl. taxPreliminary estimate for one variant
Allows for switching between slingshot and duotone wing and use the slingshot pump for both.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Print with support Material PLA / PETG Print with 100% infill
Print approx. €8.62–€10.54 excl. taxPreliminary estimate for one variant
Holds a desoldering pump on the honeycomb storage wall.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A replacement clip for the Ford Puma parcel shelf in the UK
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
3D PRINTING SETTINGS: PLA works best. Layer height 0.2 mm 15 % filling No supports required The slicer shows a lot of warnings, please ignore that. The program detects the distance between the individual layers. This "space" is wanted and…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Wargame Walls Pump Section 11 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the fight!…
Print approx. €6.48–€7.92 excl. taxPreliminary estimate for one variant
Printed with a .8 mm nozzle, worked pretty well. May want to scale up slightly to make a little thicker walls. I painted orange and added black around the face to make the features stick out more.
Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant
Ein paar Kürbisse als Deko zu Halloween. Alle sind 3 mm hoch. Farbwechsel ist alle 1mm Höhe. A couple of pumpkins as a decoration for Halloween. All are 3mm high. Color changes every 1mm. Print instructions Print Settings Printer Brand:…
Print approx. €4.22–€5.16 excl. taxPreliminary estimate for one variant
I use this as an oil mist filter for a popular 2 stage 5 cfm vacuum pump. If I understand correctly, it may also fit some other brands of vacuum pump. Required parts: M4x22 O-ring (22 mm ID, 30 mm OD, 4 mm width) - example:…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Ford Puma | Puma Silhouet Badge Use STL to adjust size and hight.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
A simple adapter to mount a cheap water pump onto a water table for kids. Reason: Mounts to the table, allows us to turn the hose off, but still lets the kids play with running water that rains down from the top of the table. Water table:…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Sup adapter for Etenwolf Air 3 Pump. (Amazon) https://a.co/d/jj8SY0z Used for Paddleboard inflation (Amazon) https://a.co/d/jj8SY0z Infil 100% Filament: PLA/PETG/ABS/Nylon STL & GCODE (Coreone)
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Design Concept This "Cute Halloween Pumpkin Keychain" features an adorable pumpkin with a friendly expression, aimed to add a fun touch to your Halloween festivities. Purpose The keychain serves as both a decorative accessory and a…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
T shank jig saw blade holder with internal blade storage. use two M2 x 12 hex head screws and two M2 hex nuts. Designed for Pumpkin carving but has variety of hobby applications.
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Do you own an airbed? Then you probably know the hassle of getting the last bit of air out the mattress to store it compactly. And in case you've bought yours at Decathlon, you probably wondered why Quechua pump you've bought to go with…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
I had this SILVERCREST handheld vacuum pump lying around. When I bought at discount some ZWILLING 's storage containers I wanted to give this pump a new purpose. I decided to make an adaptor with a rubber o-ring to improve suction.…
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
This is an adapter for inflating a Forclaz Trekking MT500 Air mattress from Decathlon with an inexpensive electric mini air pump from Pacoone (square version with lamp). The adapter is simply inserted between the pump outlet and the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
I split the design up into separate parts to help with 3D printing to minimize the need for support material. If you have any questions please feel free to contact me & please share your makes a love to see them. Printing Instruction:…
Print approx. €6.60–€8.07 excl. taxPreliminary estimate for one variant
After printing there is no further assembly required! Fully parameterized
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
This is my first ever model I designed in 3d. I had the need to keep pumpkins off the ground in our backyard garden, so I designed this model to be heavy duty enough to hold the weight of a pumpkin, and melons. So far it's working as…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Soporte creado para la bicicleta optimus aquila y el inflador Beto 2 way pumping se crea con espacios para que ajuste el tornillo con cierta holgura.
Print approx. €5.22–€6.38 excl. taxPreliminary estimate for one variant
This is a pumpkin bowl the lid is not secured in any way so it might slide off. I used supports to print the mustache and hands. No rafts are needed but the ender 3 bed is really adhesive so if you are using a different printer bed you…
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
Replacement strainer base for bilge pump used in boats. Recommending to print in PETG and with 30% infill. I used " The Filament ReFill PETG 1.75mm MACHINERY ORANGE 1kg (PETG, 1.75 mm, 1000 g, Orange) " with quite good results.
Halterung für eine Wasserspenderpumpe (5-Gallonen Flasche) um sie direkt an der Matschküche zu befestigen. Der Schlauch kommt dann in ein Kanister, Fass oder Eimer. Mount for a water dispenser pump (5-gallon bottle) to attach directly to…
Print approx. €3.95–€4.83 excl. taxPreliminary estimate for one variant
This model was derived from DavidMathis ' remix of SpyderDesign 's remix of Lived5733 's remix of Cmndr_Falken 's original. (hopefully that is everyone, lol) The family member I'm making it for wanted it to fit bigger bottles, so I…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+
The Planet Bike MicroMite 2.0 mini bike pump comes with a mounting bracket to hold the pump alongside a water bottle, but it only works to hold the bike pump off to the side of the bike. If you want to carry your pump in-line with the…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Der Griff dient zum auf- und zudrehen des Schauglases, welches sich zumindest an meiner Pumpe sehr schwer öffnen lässt.
Zodiac Valve Adapter for SUP Pumps This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump . It fits securely into the classic Zodiac valve system and provides a reliable seal for…
A bracelet with "Pumping Station:One" debossed on it. Created with FreeCAD, using the Curves workbench. The FreeCAD files contain the dimensional values in a spreadsheet, including alternate sizes: extra-large and small.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
I made this thing for preventing accidently presing the pump when i travel and the bottle is in bag with other things what i not want to get sanytized. I upload also .BLEND file for easy remake in Blender Print Settings Printer Brand:…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick Made the step and fusion file available if u want to change the diameters and such in the timeline Print like any other gridfinity file i made it in 0.3mm as i…
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
Potential plastic pumpkin porch pirates will be held accountable when they are tracked via an Apple Airtag which is stealthily hidden in the battery compartment of said plastic pumpkin from Target. Last year, we had our plastic pumpkin…
Luftpumpenhalter zum einfachen transport einer Standluftpumpe auf einem Followme-cargo. Zur Montage wird folgendes benötigt: 4x Zylinderkopfschraube M4x35mm 4x Zylinderkopfschraube M4x20mm 8x Mutter M4 2x Zylinderkopfschraube M3x15mm 2x…
EN: To identify a rotary pump or operating controls for switching a rotary pump on or off. DE: Um eine Drehpumpe oder Betriebssteuerungen zum Ein- oder Ausschalten einer Drehpumpe zu identifizieren.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
EN: To identify the control or the indicator for a vacuum pump or compressor (for example, status, or to identify the compressor or vacuum pump). DE: Um die Bedienstelle oder die Anzeige für eine Vakuumpumpe oder einen Kompressor zu…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
EN: To identify a water pump. DE: Zur Kennzeichnung einer Wasserpumpe.
Imprimé avec MMU - Printed with MMU
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I made two versions as on the right the installer put a bit of support to compensate for the slightly sloping ground. I printed with a 0.6 nozzle but you can of course also print with a smaller nozzle. If you would like to optimize you…
Print approx. €3.96–€4.85 excl. taxPreliminary estimate for one variant
For the make I've printed in my photos (and available as an option in my 3mf/gcode) I have created a 3-colour model using layer height changes. The primary colour takes up the majority, then I switched to a glow in the dark PLA for a…
Print approx. €3.45–€4.21 excl. taxPreliminary estimate for one variant
Modern Halloween Pumpkin decoration. The model is 90 mm tall and 123mm wide, the standard model can be scaled up to your liking and scaled down to about 75% and still print fine and fit a standard electronic tea light. I also included…
I present to you the first in a series of Halloween pumpkins . It’s going to be scary, it’s going to be creepy. It’s going to be fun :) This one is hollow inside and has a removable top so you can place a light source inside. For the…
New remaster model for 2026! This Halloween Jack-o'-lantern boasts a refined topology, a removable top in the classic style, and an open bottom accommodating the use of a votive or tea light. Elevate your décor with this enhanced…
These layered fidgets are hard to put down:) I have included 4 files to choose from: (1) Small pumpkin layered fidget with cut-out facial features (supports needed) (2) Small pumpkin layered fidget no supports needed (facial features not…
Pumpkin model as tealight holder Be carefull with ussing candles, for safe use led lights candles Printed with 0.6 nozzle Layer height: 0.25 3 bottom layers, 3 top layers
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
The Knitted Pumpkin is a charming decorative piece that brings the warmth of autumn indoors. Designed with a textured knit pattern, it combines the rustic feel of fall harvest with the cozy touch of handmade crafts. Perfect for seasonal…
Say hello to the articulated sitting pumpkin! Halloween is right around the corner, and there's no better way to celebrate it, than with this cute little fella. It prints in place, and no additional assembly is required. I've included two…
This lil' guy can be printed as separate pieces (support free) or as a single body. Paint in your slicer, or paint with acrylics! 👻🎃 Printed in Overture Matte PLA White, Orange, Black and Green Happy Printing & Stay Spooky! - Overture
This candy bowl comes in two sizes. The largest one is designed to print just within the size limit of a Prusa i3 MK3. Use super-glue to secure the stem in place. Grid supports are recommended. There have been some reports of tree…
If you want ALL the versions, you can go grab them all for FREE on our patreon page: https://www.patreon.com/SEREV3d We reworked the inside structure completely: ✅ The big lantern Prints in under 8 hours (compared to +11 hours of the 2024…
Halloween cookie cutters Please don't change the size in the slicer. If you change the size, they will not have a thin cutting edge (0.4mm). Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Resolution: 0.2 Notes: Print…
This bucket is designed to catch dirty water when cleaning the pump filter of LG washing machines. It was specifically developed for the LG F14WD96TH2, but will likely fit other LG models with a similar pump filter position and height.…
As the leaves turn, this spook-tacular pumpkin model with its timeless face is your go-to for starting an autumn or Halloween adventure. Print Settings: 0.20mm Filament: Prusament PLA Printer: MINI Supports: Everywhere Infill: 20% Brim:…
Tall Pumpkin for halloween decoration. The model is 160 mm tall and 84mm wide. The body and stem are seperate bodies to make it easy to print in two colours, you can simply glue the stem into the pumpkin body. The inside of the model is…
Dimensions (LxWxH) Outermost diameter of the pumpkins is about 75 mm, and the tallest pumpkin is approx. 100 mm tall. (100% scale) Basic information Pumpkins are basically the synonym for Halloween, and the mysterious glow of…
Update 16. 10. 2023: This cat was the second model I have ever published and luckily was quite successful. So after two years, feedback from fellow 3D printing enthusiasts and some gained experience on my side, it was time to update and…
UPDATE: Added a clean body version so you can scale the pumpkin up with no big fuzzy skin effect! Get ready for the screaming pumpkin, who’s just as scared of Halloween as you are! This Halloween pumpkin will add the perfect touch to your…
Halloween is getting very close now! We decided to put out another awesome new release: Day of the Dead Halloween Pumpkin , lantern version. If you sign up on our Patreon for FREE you can enter our SEREV3d Halloween 3d print Contest , and…
🎃🧙 Pumpkin Witch Hat – A Spooky-Cute Halloween Must-Have! 🧙🎃 Looking for the perfect Halloween print to bring a little wicked charm to your home or desk? Look no further! The Pumpkin Witch Hat is a delightfully creepy yet stylish model…
If you’d like me to keep going and bring you even more adorable models, you can support me on Patreon: patreon.com/draftaxis 🌸 Here’s my brand new design — a mischievous flexi pumpkin 🎃 ✨ He’s cute, playful, and just a little bit naughty…
The original Halloween series designed by HardPrint co. is released! Original super cute design, without support and easy to print. This file is not for commercial use. If you need commercial use, please contact us for license.…
Here you have a little Halloween Pumpkin. With a led light it looks great. You also can store things like pens in it. The one on the pictures is printed with an 0.6mm nozzle and 0.28mm layerheight. The scale is 80%. Print it in 3 pieces.…
A Cute Little Pumpkin Spider For Halloween Decor
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Alchemist is the next step in the evolution of 3d printed pump action springers. Alchemist is built like a tank, has a butter smooth priming and firing feel, and is customizable with many alternative parts and upgrades! MAKE SURE to…
This haunting 2D pumpkin design perfectly embodies the eerie and festive atmosphere of Halloween. With its carved features and classic Jack-o'-lantern shape, this iconic symbol of Halloween brings a touch of spooky charm to any decor.…
Click-it Fidgets are a perfect non-sugary treat to hand out for Halloween! 🎃 I've included a pumpkin base with and without the keychain hole too! This set of Click-its has six jack-o-lantern faces to choose from plus a blank pumpkin.…
Realistic pumpkin skull mask with scary details, perfect for Halloween or cosplay.
Ich habe für das Modell Glow-in-the-dark PLA Filament verwendet! Sieht nachts super aus! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa Slicer die maximale Druckgeschwindigkeit auf 80 mm/s eingestellt.
Found these on thangs and loved how they printed. Wanted to share them with the Printables community
[Updated 2024-10-29: Added new links to related models in notes.] Check out my Jack-o'-lantern OR Ghost tealight holder design that can be found here: Jack-o'-lantern Tealight/Figure - Halloween Pumpkin Decoration Ghost Tealight…
Meet the Ghost Pumpkin Clicker 🎃👻 – a cute Halloween-themed desk fidget featuring a happy little ghost popping out of a carved pumpkin. It’s small, fun to print, and gives a satisfying mechanical click every time you press it. 🖱✨ The…
Update 12/09/2023 Thanks to one of your feedback I've figured out that the file for the Stem wasn't laying right on the buildplate and had a wrong orientation. I've now uploaded the correct one, so you don't have to arrange it yourself…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) CUSHION PUMPKIN / MODERN…
Remixed ghost pumpkin from overture, adjusted for a tea light to create a spooky look, great for halloween decoration. White body part needs some supports in the middle Stem can be glued into the top If you want to support me or get…
Printing time is about 22 minutes with a layer of 0.2. This is enough to create the effect, but you can print smoother too - 0.1. On my photos and videos, printing was carried out with a thickness of 0.2. Any opaque plastic can be used…
The hidden latching mechanism will only unlock if you discover the twisting top section. Customization Choose between 2 base designs (smile or plain) Choose between 4 ring designs ("Happy Halloween", “Trick or Treat”, “Allergen Free” or…
Carved pumpkin bowl for Halloween
NOTE: THERE IS AN UPDATED VERSION OF THIS MODEL AVAILABLE HERE: https://www.printables.com/model/1027691-pumpkin-pie-fighter-2024-remaster-halloween-themed This Star Wars Halloween PIE Fighter prints without supports and assembles to…
Pompa mała i funkcjonalna. Jak ktoś nie wie jak działają pompy wodne to można sobie ją wydrukować i zobaczyć jak działają. Świetna zabawa dla dzieci:) Print instructions Silnik jaki tu wykorzystałem to mały silnik od samochodu na pilota…
