1,635 models
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Simple painter pyramids to elevate your workpiece while painting, gluing, or finishing. Designed for stability and minimal contact with the surface, these pyramids help prevent smudges and ensure even drying. Easy to print and stackable…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
After having no luck slicing an existing level 7 Sierpinski fractal pyramid, I generated my own using OpenSCAD. OpenSCAD took nearly a day to generate a level 6 pyramid, so I almost gave up until I found there was an experimental Fast CSG…
Print approx. €87.94–€107.49 excl. taxPreliminary estimate for one variant
What we know about Egypt's ancient civilization comes from what was left behind. Archaeologists scour the region for remnants to piece together pictures of the past, but some clues are hard to miss: at six and a half million ton, taller…
Print approx. €10.06–€12.30 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Print approx. €10.53–€12.87 excl. taxPreliminary estimate for one variant
These are simple paint supports. Three versions, with different rounding. On wood boards, depending on the weight of the piece you paint, the pointier ones may leave a mark, hence the more rounded ones. I recommend the 3mm rounded ones.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Maya Pyramid Dimension below
Print approx. €9.26–€11.31 excl. taxPreliminary estimate for one variant
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
EN - English A set of stamps designed for ceramic production. These stamps are created with an emphasis on easy of use and flexibility. A magnet is integrated behind the 0.2 mm layer of both parts of the stamps, allowing the printing part…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for one variant
A larger pyramid style challenge coin holder designed to display 10 coins of 40mm diameter displayed in 45mm diameter cases. Want a smaller version? Check out my smaller 6 coin pyramid holder here ! Prints great in PLA at 0.2mm with…
Print approx. €8.66–€10.58 excl. taxPreliminary estimate for one variant
Modèle de la pyramide de Sierpinski, modélisé par moi-même. Model of the Sierpinski pyramid, modeled by myself. Instagram: @roiku3d
Print approx. €12.70–€15.52 excl. taxPreliminary estimate for one variant
Showcasing the magic of 3D printing, the Impossible Pyramid Fidget features a perfectly captured sphere inside a geometric pyramid. This intriguing design is available in both monochrome and dual-color versions, adding an extra layer of…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for one variant
EDIT TWO YEARS LATER - I know a lot of people actually like these a lot more than I did, but really I have a much better version now - if you are interested you can find them HERE. Because the world is a wonderful place full of diverse…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
I designed this in PrusaSlicer using 2 pyramids. It is pretty much a vase mode part and it is stackable for easy storage. I used PETG and .4mm layer heights with a .6mm nozzle X.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
The A-mazing Irregular Tetrahedra "A", the geometric sensation that's taking the alphabet to new dimensions! Print-tested on a Prusa Mini: 0.4mm nozzle, 0.15 layer height.
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 16mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 16mm, proporcionando una…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
ERROR in V2 Code ! Sorry! This was fixed in V3 In a recent post, Prusa introduced the K Values in the G-code of the Filament Settings, and since i had trouble with Multicolored print having a nice bond between the edges of the colors, i…
Print approx. €7.68–€9.39 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Full Set for Sale: https://www.printables.com/model/745241-nordic-style-ceramic-vase-home-decoration-full-set Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Print approx. €21.52–€26.31 excl. taxPreliminary estimate for one variant
I watched Wreck-It Ralph and decided I needed something Qbert! This could be corner mounted, straight wall-mounted with bracket, or just a desk piece. I'm not quite sure which way I'm displaying it yet I printed with tricolor filament to…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A connector to make a square equilateral pyramid out of straws. Uses the white part of the straw from boxed milk.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
A delightful jigsaw puzzle featuring 499 pieces, with the intriguing addition of a unique top-piece, making it a total of 500 pieces of impossibly fun challenges! Get ready to embark on an entertaining journey of puzzling and discover the…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
A square-based pyramid where all of the edges are the same length.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Die Pyramide wird als 3D-Druck ohne Füllung gedruckt. Kann mit der Prusa Slicer Datei angepasst werden. Wie wir die Pyramide erstellt haben sehen Sie hier: https://createyourideas.de/freecad-pyramide/
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Caja para herramientas en la cual se pueden contener todos los materiales que te envía Prusa como llaves, goma, desarmadores, alicate, memorias SD , etc. Muy sencilla pero útil, esta es la parte inferior próximamente la superior o…
Print approx. €16.11–€19.69 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Full Set for Sale: https://www.printables.com/model/745337-simple-ceramic-vase-home-decoration-full-set Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
You can change the height of the needles in the slicer. A PDF with the layout is attached. You can combine with the model Heart – triangular design od autora Jakub Lattenberg
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I needed to be able SD storage devices but didn't want to limit myself to a fixed number of devices. I found this model by mbrami on Thingiverse and it allows for a different type of device to be used in each location, with the number of…
Print approx. €4.92–€6.01 excl. taxPreliminary estimate for one variant
Ideal for small plants, moss, especially Iceland moss . I designed the model from scratch using OpenSCAD, but tried to stick to the shapes and dimensions (measured visually (aka guessing 😅)) of the Planter of the Ancient Mayan Pyramid…
Print approx. €5.48–€6.69 excl. taxPreliminary estimate for one variant
A model of a simple pyramid with the parametrized FreeCAD origin included.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant
A pentagonal bipyramid.
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Model of the tiramisu glass sold at Costco with a printable lid. Intended to support waste reuse.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A pyramid-like version of the Towers of Hanoi. The pieces seat inside each other to make a nice pyramid-like shape. The whole thing is about 2 inches high and 3 inches wide, so it's very portable. Print as in the STL. PETG or PLA will do.…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Je třeba dbát opatrnosti při manipulaci s žiletkou. Záleží na kvalitě výtisku, popřípadě žiletku zacvaknout do spodní polohy, záklopka ji poté vyrovná.
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
pro snadnějsí tisk odnímatelná rukojeť velikost se dá libovolně upravit ve sliceru ---------------------------- Removable handle for easier printing the size can be adjusted freely in the slicer
Print approx. €11.21–€13.70 excl. taxPreliminary estimate for one variant
Painter's Pyramids Pyramid 1 - Square x Square (35x35x38x2mm) Pyramid 2 - Square x Square (25x25x25x4mm) Pyramid 3 - Square x Square (20x20x20x6mm) Pyramid 4 - Polygon (6) x Polygon (6) (20x20x5mm) Attaching STLs, F360 file and GCODE file…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
He añadido un tirador para manejar mejor la caja
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
Dicetower_Pyramid
Print approx. €6.73–€8.23 excl. taxPreliminary estimate for one variant
Dji Inspire 1 Mocowanie ramienia ruchomego do drona Ramię prawdopodobnie prawe z tego co pamiętam jeśli potrzebne lewe to wystarczy zrobić odbicie lustrzane. Pasuje wszystko jak do orginału.
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for PETGSource material: PET
una pieza para origami (muchas piezas)
Print approx. €1.12–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
A square pyramid with only the base, the height, and the edges visible. The model is designed to be tactile and is suitable for use in the classroom to visually and physically illustrate geometric shapes and relationships. Created by Linz…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Elongated pentagonal bipyramid.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
The gcode file uses a 0.6mm nozzle and 0.5mm layer height.
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for PETGSource material: PET
Por fin mis cajas de herramientas tienen un lugar que no sea el suelo.
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
Soporte de herramientas para perfil de ender 3
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for one variant
I needed a container to put my Ceramic Tiles in for my Laser Printer. I made this model on Tinkercad and it turned out great.
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for one variant
This is the 3D printed PLA 4 perimeters, 20% infill, workholder we used with the nomad carbide milling vice. as seen in this video by yours truly:
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
Knob compatible with 220Volt 3200 Watt Vanette Ceramic Oven. Remix from knob with Compatible D slot in the back, added a ring with correct number positions as well as the slot for a M3x20 screw to secure it to the post. Unknown if it will…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
Created using my sister project: "Nextruder Plotters"
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Sada vykrajovátek pro velikonoční výzdobu - ZAJÍC S MRKVÍ - z keramické hlíny návrh keramického výrobku a rozkreslení na jednotlivé díly kreslení dílů v TinkerCadu (Scribble) přenesení do formátu . stl úprava velikostí v PrusaSlicer…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Žáci 5. ročníku vymodelují „sčítací domeček a pyramidu“ pro své mladší spolužáky. Razítka budou fungovat pro předtištění při počítání, zrychlení a zefektivnění výuky matematiky na 1. stupni.
Print approx. €2.46–€3.00 excl. taxPreliminary estimate for one variant
Created using my sister project: "Nextruder Plotters"
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Cílem projektu je využití raznic vytvořených na 3D tiskárně pro tvorbu keramické reliéfní plastiky-konkrétně analogových hodin. Pro naše hodiny jsme zvolili téma “Hudba“.
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
An infill edit of the original "Clouds" plot
Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET
Studenti si vymodelují základní prvky keramických tvárnic. Modely následně vytisknout v měřítku 1:20. Sestaví model výseku objektu dle projektové dokumentace a ověří si svoje schopnosti projektanta.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
Just another impossible spiral design. I wanted an hourglass style cone and a longer one so drew normal hourglass cones and pyramids as well as dubbel length versions ;-) I'd love to see some makes ;-) Printer settings I used: PETG 0.4mm…
Printing Instructions/Recommendations 50% gryoid infill provides weight and strength so it can move through with just gravity 0.2mm layer height PLA for good finish Offset is around 0.2mm between objects - will not scale down well Print…
Painters triangle (or painters pyramid) for holding work off a surface while applying paint or finish. Can fit at least 8 on a prusa mini at a time. They print quickly and easily. Triangles are also stackable for easy storage.
Here's my take on the painter's pyramid. I've designed it in three sizes, measured by the long edge of the triangle. The design is meant to be 3D printer friendly such that you should not need supports to print this. Update: I printed 6…
Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…
This is a remix of ricktu's Fractal Pyramid on Thingiverse that is more reliable for slicing in Cura 5.1.0. When sliced in vase mode, the original model had thousands of retractions on the first layer. So I edited the original models in…
🇲🇽 Welcome to Yucatán, Mexico! Ancient Ruins , a dedicated sub-collection by MiniWorld3D about past civilizations, presents: Mesoamerica. This model was created by Artemio García . This is available in two versions: Actual state (ruins)…
🇪🇬 أهلا و سهلا Welcome to Egypt! The only remainder of the Ancient 7 Wonders of the World ! This model depicts the Great Pyramid of Khufu/Cheops , the Pyramid of Khafre , and the Pyramid of Menkaure , as well as the smaller building…
These painter’s props (also called painter’s pyramids) let you elevate your workpiece while painting, staining, or finishing. The small pointed tips minimise surface contact, allowing you to work on both sides without sticking or marking.…
Instructional video is included in the download files. Remove as much of the glue in the first stage of the process. This will make sliding the adapter into the cardboard core easier. Make sure not to jolt or shake the bare filament or…
What makes it special I made this one as my favorite shape in the BEST impossible vortex passthrough series. It is a square pyramid, and it comes in two parts. The inner piece slides through the outer piece, twisting as it goes. That is…
As the title states, these are scan markers for 3D scanning primarily used in Structured-light scanning. The embedded magnets are interference fit while the markers are applied as stickers on all 5 sides. BOM 10×3mm Rare Earth Magnets…
The Design Back by Popular demand with a Mini Pyramid Passthrough. Compatible with the rest of the V2 Series Now in the shape of a 3 sided pyramid (a tetrahedron), The “male” part of the thread seems to defy physics by passing through the…
🇪🇬 أهلا و سهلا Welcome to Egypt! Print The Pyramids of Giza in their true setting with intricate detail! This model was developed in collaboration with Micropolitan , combining the MiniWorld3D detailed model of the landmark with…
A changeable 6-spoke pyramid pass-through twisty puzzle fidget toy, made famous on TikTok, including the OpenSCAD 3D model file used to create it. I was driven to create this model because everything that I'd found on the 'Net did not…
I have created these tools with different shapes to model your vases or your paintings with plaster. Group 1 - allows you to create geometric textures. Group 2 - allows you to create vases or cups with simple shapes. Group 3 - allows you…
I needed some marker setup my Revopoint POP 3D Scanner is able to pick up better than flat one on the turntable. Come up with these minimalistic pyramid I put the scanning markers provided by Revopoint (10mm Diameter). Fast printed , very…
pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid pyramid…
These gorgeous stamps will take your work to the next level. Enjoy!
Pyramid Head 3D Model – Silent Hill 2 Highly detailed 3D model of the iconic Pyramid Head from Silent Hill 2. Designed to capture the eerie and menacing presence of the character, this model is perfect for fans, collectors, and…
2020 / 3030 / 4040 T-Slot Framing Structural Brackets Ideal for use in 3D printers, CNC machines, laser cutters, enclosures, and other DIY frame structures. Suitable for: 2020 3030 4040 All our designs are free to download and use—because…
The pyramid in the pictures has 6 lobes on the screw. Therefore it fits in 3 ways, where 1 way is the “right” one. Onshape Design Link
Need a basic cube but don't feel like installing 3D software or firing it up to make one? Here you go. This is a small pack of 6 primitive shapes for whatever you may need them for. Whether it be test cubes, or stretching the cylinder…
Cajonera Bajo la pantalla de Ender 3 Cajón alto para guardar boquillas y piezas pequeñas. Cajón medio para guardar las llaves Allen, destornillador, llaves fijas y dos espacios para las tarjetas microSD y el pendrive. Cajón bajo para…
12/02/2024: Modified version added: wall width slightly increased and pyramids can be connected. Last photo -- side by side comparison with original (used the same printer, the same filament and the same settings). Round holes of original…
Egyptian style pyramid Print instructions Print outer shell slow to avoid ghosting of the hieroglyphs Category: Buildings & Structures Summary Egyptian style pyramid
English It's just a small painter's pyramid. The existing templates were either too big for me or too unstable. I've tried to find a good balance. The pyramid is only 25mm high and (in contrast to the templates found) not so sharp at the…
This is my new version of the Hatak Class Pyramid Ship from Stargate. The model is waay bigger and waaay more detailed, then my original one. It also comes with a pyramid so it can land on it. It is a kit and you do not need any glue for…
This model represents a level five iteration of the Sierpinski Pyramid fractal. Instead of being made up of individual octahedra, it’s constructed from a unique shape with extra faces, creating a bold, wicked appearance. This version…
This is my model of the Cheops Class Pyramid Ship that was featured in the movie Stargate as well as in 3 episodes of the SG-1 series. The model has sliding parts to simulate the features seen in the movie and it comes with its own…
Die Pyramiden lassen sich schnell und mit wenig Materialeinsatz drucken. Sie werden einfach zusammengesteckt und lassen sich bei nicht Gebrauch auch wieder auseinandernehmen um sie platzsparend zu verstauen. Die Pyramiden sind 40mm breit…
Herramienta para calibrar las correas de tu impresora 3D y determinar la tensión idónea para su correcto funcionamiento
Welcome to Central Mexico! The Ancient Ruins Collection - Mesoamerica is a dedicated subcollection to the legacy of past civilizations in parts of what is present-day Mexico and Central America. This model was designed by Dany Sánchez .…
When painting and finishing woodworking projects, I'll often use scrap chunks of wood to support a painted face and clean it up afterwards. I finally got around to designing a small (3.5cm tall) pyramid or cone-like thing to do that job…
Model of a realistic pyramid. Most of the pyramids out there just have smooth surfaces, but that is not the way the pyramids really look. The model is designed for teaching to learners with Vision Impairment, therefore a big print is…
One made from wood, now made from plastic...
I recommend scaling up to 1" on the sides (166%).
Christmas pyramid. Printed in 9 parts. The parts need to be glued together or connected with a 3d-pen. The model should work, if it is not to small printed. If the pyramid is to small the heat of the candles could melt the parts or ignite…
A miniature interpretation of the Pyramids of Giza, reduced to their essential geometric form while preserving their iconic presence and timeless monumentality. Part of the Tiny Landmarks collection, this piece translates one of the…
Tried to make us a quality pyramid-triangle-paint-stand-thingi. FEATURES- All 3 models stack well regardless of orientation. -4 ECO stands held 95lbs of buckets without fail. -A single SUPER stand held my wight of 160lbs balancing on a…
Print Settings: 0,1 mm Layer-height NO support needed 15 % infill
Pyramid-designed LED lamp with the proportions of the Great Pyramid of Giza. No supports required. The base features a 60 mm diameter x 8 mm high slot to place the LED light. Download an older version...
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
