Counting matching models…
Designed to fit inside a 20 mm hole drilled into a wooden door, with a matching recessed magnet in the door frame. Once installed, the sensor is completely hidden while retaining the reliability, battery life, and Zigbee support of the…
Fits Gift cards and more! Prints with NO SUPPORTS! High capacity secret stash or gift box. Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Want to sell this? → Grab a commercial license on my Club! Only $20/month cancel…
Funny sign-"I do precision guesswork based on unreliable data provided by those of questionable knowledge" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. 2 versions (stl & 3mf)…
I really liked the idea of the speedbump and hinged riser by these contributors listed below so I combined them to make them into one. Added 10mm height to the original parts and made ventilated and non-ventilated side pieces. Back plate…
Remix of my other stand that had the logo extruding from the front. This one was made with Hatchbox wood PLA. I really love this stuff. I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo,…
A set of nine 25mm bases with a recessed cavity underneath that comfortably fits a small washer or a penny for added weight (pennies are cheaper). I like to fill mine up with milliput after gluing down the pennies and then sanding them…
This model was found on thingiverse: https://www.thingiverse.com/thing:5507861 by DIVMSTER who remixed it (added the magnet recesses) from the original: https://www.thingiverse.com/thing:3054777 by SkornoThePro I printed it for a family…
8/18/2024: Updated pictures to match the updated stl and CAD files. Printing with organic supports and no top interface layer provides the best results I have found. 8/9/2024: Printing the fillet edges has been particular difficult to get…
Wanted to hide the Skylight Calendar power adapter behind the wall mounted calendar instead of running the cord down the outside of the wall. The store-bought box wasn't deep enough and didn't have enough of an angle to fit the adapter…
Wrapping paper roll paper CAD drawings available on ONSHAPE https://cad.onshape.com/documents/d699f4cc1cbd40c079fefa78/w/94a0a86b2106c6660435546a/e/1ad62e77c24517be7092ce33 Before you commit to printing the whole model. It is recommended…
Cutting aid for wrapping paper rolls
I find it difficult to understand why so many people use these upside-down, given how much weaker they are for their intended use in that orientation. And yet, it's apparently popular enough that @Genghis' model , and @ericsnis' model…
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently…
A set of nine 25mm bases with a recessed cavity underneath that comfortably fits a small washer or a penny for added weight (pennies are cheaper). I like to fill mine up with milliput after gluing down the pennies and then sanding them…
This was my first attempt at a chamber flag. Worked very well and I've printed out many for both myself and friends. Never had an issue releasing the slide down onto the flag. Rounded “lollipop” design reduces snags. This version also has…
As it is designed with OpenSCAD, it is quite easy to modify it to fit to your needs, including width, height, length, thickness, label dimensions etc. Have fun!
Printed without supports in ABS. You can of course also use other materials.
This is a remix of "Bookmarker horse customizable" by albang to recess the lettering and change the font. Thank you for sharing your code. I've included my OpenSCAD modification here. I've also included the Running-Horse2.svg from…
This is a remix of the PC4_M10 slot for the original MMU Slot buffer. It contains two models. The first solely includes a recess where the handle attaches to the slot. The benefit is that the original handle can be used and the “fingers”…
Simple print for when you find out holes larger than 6" were cut for your recessed lights, and your new lights go right through the ceiling. Just place this bad boy behind your light and you're set. Print Settings Printer Brand: Creality…
This model is compatible with the lego system.
Remix of great design by AMT, allows for easier readable legends on single color print or with bad retraction.
In order to have the bolts sit flush with the surface of the tictac gun, I added a negative volume for each. To do this yourself, right-click the gun part, add negative volume, select Load, and pick the m3-hexnut.step file. Center it…
This screen fits behind an astromech's utility arms. I designed this to house the TCD with a slot for the cards to come out of. This model is the ‘solid’ version I created for the upper utility arm socket. I have included the greeblies…
This is a holder for an Apple HomePod mini that allows you to screw it into a standard recessed light fixture (or any other light socket). It not only mounts your HomePod mini to the ceiling but provides power! All without impacting sound…
…Please be sure to hit like & post a make, I'd love to see your prints! Add recessed DIN Rails to your SV08 in between the two 2020 alu frame extrusions for additional taller boards & equipment! Yeah you can add a rail on top of the…
This recessed rack ear is a (hopefully) improved version of the one made by cedd. The original suffered from too much flex when mounted in to a 19" rack, leaving an impression that it will bend over time or crack when not handled with…
SpaceX Starship heat tile inspired coaster and optional holder. A clean and simple design with shallow recessed hexagons to allow for easier cleaning and a raised edge to catch spillages. Spacing between the hexagons allows for moisture…
I built a custom enclosure for my prusa printer, out of MDF. This is the handle I created to incorporate into the enclosure. The sides of the box are made with 18mm MDF. This is the maximum depth of the handle. This could easily be used…
I took the idea from another creator i saw on here. The thing I didn't like was that their design didn't sit within the recess of the controller, therefor the sticks could still move. So I redesigned them to fit my needs. I assume it…
This is a two-part mount. The bracket that friction fits the speaker and friction fits/screws into a hole and the cover plate that snaps into it to hide the screw holes. A template to cut the hole is also included. The inside of the…
Here is a coaster for the Iowa Hawkeye fan in your life! This is originally made by Dart31 on Thingieverse. I printed this with 15% infill using CookieCad PLA in Black and Prusament PLA in Oh My Gold. You can print this coaster with:…
I designed this simple tray and bezel for an integrated install into my wall. Used for home automation. Print the tray face up with supports & sand the backside if needed. The bezel can be held on with 2 sided tape which will hold the…
This model is compatible with the lego system.
TLDR: The pin holes on this LEGO-compatible rim are located as far forward as they can be to clear space inside the rim for a realistic steering system. —————————— As many experienced LEGO builders know, trying to accurately model a car…
I plan to make a bunch of inserts for these organizers that need a deep recess. Figured other folks might want to do the same, so here it is. Note: It looks like not all of these organizers are exactly the same. Some have slightly…
This jack plate was designed for a custom guitar amp cabinet I built and covered in this YouTube video . I wanted to be able to push the back of the cabinet flush against a wall and typical jack plates aren't suitable (when using a…
🍃 Pattern Texture Rollers – Leaves A growing collection of 3D printable texture rollers with seamless leaf patterns , designed for adding decorative textures to clay, dough and other soft materials. The Leaves Collection includes multiple…
Lots of people complain about the appearance of the Ecobee. I think it has to do with the giant white circle around the unit, and the fact it hangs off the wall so far. Every day I looked at my Ecobee, it bothered me. So I solved the…
2x PG7 AB Motor Plate for CAN bus with PG7 umbilical and PG7 gland. Remixed - added cable recess (RGB / USB)
Generate a spacer ring to put around an existing or new recessed light. Enter the parameters as illustrated and render the ring. Do remember that if your light is smaller than the hole it is covering that the springs will put pressure on…
another panel design, this ones from 2017
🎃 Pattern Texture Rollers – Halloween A growing collection of 3D printable Halloween texture rollers , designed for adding spooky and decorative patterns to clay, dough and other soft materials. The Halloween Collection includes multiple…
I have seen these (in brass) on boats and some high-end luggage, such as the 1870's English officer's wood luggage he used when going off to India. The mounting holes are based on a #5 x ¾" Steel Phillips Flat Head Screw for Wood. They…
This model is compatible with the lego system.
I used Siraya Tech Blu for this, using their profile settings, heating my print chamber to 30 degrees C, and giving a thourough cleaning before 15 minutes of cure time.
This is a 6 inch round blank ceiling plate to cover an electrical box. The walls are about 1/10" thick and it's sturdy. For my application, I needed it to have a 0.25 inch inner recess, making the overall height 0.35". I printed this in…
ENG Earrings as a recession for a woman who wanted real Czech grenades. Metal parts need to be purchased or manufactured. CZ Naušnice jako recese pro ženu co si přála pravé české granáty. Je potřeba koupit nebo vyrobit kovové části.
I have two particular ceiling lights that I wanted to partially block from shining directly into my eyes while watching TV. I don't know how common this size and particular shape are, but It's modeled with a 5.8in (147mm) diameter and has…
I created this model to allow flush mount to wall to minimise how far it sticks out. It uses a simple click mechanism to allow easy removal simply by sliding the screen up. This allows the back plate to be secured to the wall and sliding…
Basic recessed paper towel holder. Created at the request of my wife who wanted to move our towels from the counter top to inside of a kitchen cabinet. Shelf gap width is 20mm.
Need a recessed drawer pull? Someone else had me covered, so I gotchu covered. The internal width is 5 inches because we're all giants. I didn't make router templates for this larger model.
It is by making the dummy lamp 13 that I had this idea to make it out of the ceiling of my daughter’s room.
Introduction This is a battop for Sanwa JLF with a 17.2mm recession. When installed on the normal JLF shaft, it simulates installing the battop on a short shaft. As a balltop enjoyer, I really like this configuration a lot. This is an…
Adapter to allow multi-size VESA mounts to attach to 100x100 M4 VESA monitor Dell monitors(and others) have recessed VESA mounting holes, if you don't use spacers a large flat universal mounts will put pressure on the monitor case and…
This remix adapts the original design to use a 7/8" spade drill bit, which is readily available at any US hardware store. The original calls for a 20mm bit that's difficult to find domestically. What changed: Hole diameter: 20mm → 7/8"…
Buttons for heltec. except the reset one is recessed
The handles are easy to print. If they are placed lying sideways on the printing bed, only support geometries in the holes may be required. In one variant, threaded screw-in sleeves can be screwed in. I myself used Rampa muffles type…
When I saw the moon model I knew it was a must have For my soon to be born newborn's nursery. I designed this ring eliminate upward light leakage and to seat the Hue Bulb perfectly In the ideal position when hanging overhead from a…
Sometimes you have a tool where one part of that tool that doesn't quite fit in a low profile case - for example, a combination wrench that is just a little-bit-too-wide on one end or the other. You can take advantage of the the recesses…
This is a simple recessed handle. You will need hardware to assemble: 2x M4x25mm bolts (M4.5 or M5 will also fit) 4x M4x15mm bolts 6 M4 nuts M4 washers Scale up or down based on the application. Tested with ~7kg/16lbs and plenty strong…
WORK IN PROGRESS The magnets aren't needed and replacing the backplate with small corner protrusions would simplify printing substantially Fully recessed old work box for the AC Infinity 69 controller that allows the unit to be flush…
Inspired by this but wanted something more specific: https://www.selby.com.au/av-distribution/wall-plates/wallplate-recess-box.html With f360, you can customise: Flange width Hole dimensions Depth at 2 points to angle Side blanks…
This is a remix of jayziggy's awesome original model. I made the following modifications: Scaled the original to .001 in Netfabb so that the object would seem to be in mm units rather than µm. MeshMixer was then used to add some breakaway…
Display Shelf w/Recessed Top. Designed to be held up with thumbtacks. Intended for lightweight object display. 10"(254mm) wide, 5.83"(148.16mm) deep and 4.17"(105.91mm) tall. Designed with larger build volume printers in mind
This a recessed handle used for lifting my laser enclosure. M3 thread inserts and hardware are used to secure. SVG cut file included for opening.
Just a remix of another handle, added a recessed hole that allows you to attach a camera without clearance issues. ** added the screw that fits in the hole with a flat blade to tighten in the hole.
Just mirror the construction if you have the usb placed on the right side instead of left side. I print mine in yellow PETG.
🎄 Pattern Texture Rollers – Christmas A growing collection of 3D printable Christmas texture rollers , designed for adding festive and decorative patterns to clay, dough and other soft materials. The Christmas Collection includes multiple…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/cMc7rE55BYk Category: 3D Printing
added a locking recess for mounting on the tool. Support structures are included and only need to be broken out after pr
This mount uses magnets to hold the Voice unit in place. Press the magnets into the 4 posts on the printed model. I recommend using a right-angle USB-C cable to connect your power source. Requires: 4x 4x2mm magnets 4x *ferrous/magnetic*…
I built this to suspend a bike from the cieling printed in petg it is more than strong enough. it is compatible both with 6000 RS bairings using the original desighn of roller and with 6020 RS bairings using my updated desighn the…
I tried to remodel the original design as closely as possible. in fact the original front plate should still fit. It's 1 millimetre deeper and two millimetre taller on the outside. but much bigger on the inside. Fits 3000mah battery!…
fan wire recess added I recommend v3
Remix of a nice design by mikiCZ to add 5.5mm hex nuts (for 3mm threaded bolts or machine screws). 3x 3mm holes are 15mm apart each allowing for 15mm mounting or 30mm mounting of devices. Category: Electronics
Original part has a flat bottom. Modified part has the angled bottom.
The 4" Gimbal Recessed RGBW Downlight This design makes it perfect for tight spaces and low voltage wiring makes it easy to put these in places that might not otherwise be well suited for traditional recessed lighting. Here's what you'll…
An idea (read the full description first) of a hinge that can be used in a recessed space in the wall to mount doors flat with the wall and open the door to more than straight angle so that the space is not obscured when the door are…
This eyelet recess is a replacement part for the W906. Since the recesses tend to rust and the replacement parts are expensive, I have created a cost-effective alternative that any 3D printer owner can print themselves. This model was…
Chess Board with recesses for easy placement of the figures can be printed in color by filament change
Note that there are two versions of mounts provided - One accepts a removable cover and the other has no removable cover ability. The one that accepts a removable cover has an annular ring on the bottom designed to help prevent any light…
Meet the recessed light cover! Ever been on a call, and the insufferable light glare in the background prevents people from seeing your beautiful face? Well today, all of your problems have been solved. This cover not only eliminates the…
There are any number of shower hooks on Thingiverse, so why did I create a new one? This design is for shower recesses that are either edge-less glass panels or glass with an extruded aluminium top edge. It's fully customizable. Two nubs…
This is a sectional building called Stroker's that I designed in tinkercad. I will print in parts and assemble with Plastruct Plastic Weld. It features a recessed main entrance along with a side entrance door for access to the second…
Recessed air drop system for Rc Airplanes or whatever your heart desires. Used with a mini servo
A dummy cutout model to make a routed cutout in a guitar body. Use it to binary-subtract it from your guitar body model for further 3d printing or cutting with router. 2024.03.22 UPDATE: made "earflaps" recess 1 mm longer on each side
Looking for a hands-on way to teach rotational dynamics , angular momentum , and gyroscopic motion ? This 3D-printed gyroscope is designed for physics educators, students, and makers who want to explore fundamental physics concepts…
Printed with PLA Wood so that you can sand (e.g. P400) it yourself according to your wishes. Oval thumb recess 24 x 18 x 1 mm Print with 100% infill and 0.1 layer-height I have used the following Wood PLA filaments…
a steeper angled part to improve the directionality of the tweeters, with the whole thing recessed into the recess of the car to minimise how much room they take up. my print was done with PETG in matt black, using tree supports in prusa…
I bought an Igloo threaded drain plug (Igloo p/n X000S9H40D) to add to my Profile II 50 cooler, and drilled a (~28mm) hole through the side and the internal drain plug boss before figuring out that the drain plug was too short. Oops.…
A modification of the original AMD CPU case by d3rdav3, with a recess for easier removal of the processor
A tool for inserting and removing the Zodiac Semi-Recessed Valve Insert Diaphragm Z60055. Square end for a 17mm (or adjustable) wrench. Best printed with square side on the bed. I used PLA with a 0.2mm layer height.
9 piece SAE Snapon Wrench holder for 7/8, 13/16, 3/4, 11/16, 5/8, 9/16, 1/2, 7/16, 3/8 10 piece Metric Husky Wrench Holder for 19, 17, 16, 15, 14, 13, 12, 11, 10, 8 Both or at least one will fit a large variety of sizes with the taper.…
Recess for pop sockets
Negative volume modifier to turn any model into a Maghex compatible model using 3x3 magnets. This modifier allows for easy insertion into any model. Steps for usage: NOTE: Steps given for PrusaSlicer. Add the model you wish to modify for…
Hello friends from all over the world :) Since I am used to the first aid kit mandatory for cars, I always have a second kit at home. It’s very handy, because I store it at a central spot in the house. I never have to search for it.…
Added new holes with heatsets to mount HGX Lite Extruder. Also modified mounts to use shorter m3 bolts and modified the PIS mount to use heatsets requiring longer bolts. Does shorten Y travel a bit as the extruder motor sticks out a bit.
This filament sensor has a recess for the screw that sticks out too much on the Fysetc MK3S+ clone (Sorry, Josef!). This will allow the filament sensor to sit flush on top of the extruder assembly. This remix will even allow this filament…
Designed to be used with my Recessed Lens Board . Print with a 0.25mm nozzle and organic supports.
