4,030 models
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
this is a high preformance ball i specifically designed to bounce as well as possible without the need for supports and that works well with basic cheap and easy to print materials such as PLA works better for PETG. The PETG i recommend…
Fridge magnets are great but I don't like that most of them put the magnet dangerously close to the finish on that expensive fridge and removing them to put up a new note or change a picture can be a hassle, if your hands are full. This…
Printable model of the Prusament spool for Prusament Refill system. If you cannot use your old Prusament spool, it is possible to print this reusable spool and put the refill on it. The model is made to fit the Prusament Refill spool . -…
Let me introduce my newest whistle design, the Ultimate Referee Whistle . What makes this whistle outstanding: extremely loud and far-reaching, piercing triple tone, high side walls for perfect finger grip, mouth grip for hands-free…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
A better scraper it is. Why would so many makers print a scraper? I've never used one since my flexible print bed and my tiny fingers work fine (don't you ever touch the print bed). Ok, it must be some kind of fetish appeal. But…
A reference model to use
I couldn't find any decent reference models for a standard 2.5" Hard Disk Drive (HDD) / Solid-State Drive (SSD) that included a non-STL source file. I've created this reference model and want to share the STEP file in addition to the STL.…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
Serenity - Firefly Class From the tv series Firefly.
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
Very nice skull made out of a fine mesh. Can be printed in different scales and used as a coin holder or just an organzin help. Print instructions To achieve high detail, print with a 0.25 nozzle at 0.10 mmlayer height and lightly torch…
I really like the little 1x1 case by @ftobler and printed a bunch of them. However, I couldn't resist making a few of my own tweaks to the design. Easier Overhangs - The original model has pretty shallow overhangs on the corners that can…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This is 3D printable model of the Constitution Refit NCC-1701-A Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing. Pieces of the necelles need to be…
A refinement of Emmett Lalish's excellent Gear Bearing -- now with chamfered edges, a smoother outer surface, and dimples for your fingers to hold. Internal geometry and clearances/tolerances remain unchanged. Prints great in PLA, PETG,…
Found these on Grabcab by Ben: https://grabcad.com/library/festool-systainers-sys-t-loc-1 Wanted to share here. These are not my designs.
FormFutura's ReFill 2.0 is manufactured for usage with re-usable spool flanges and comes on a cardboard core with velcro strips. This improves the material winding and overall coil strength. Our new flanges are designed with minimum…
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
First model ive uploaded, probably the 3rd ive ever made. Not a cad pro, so please forgive me. I based this off a picture from amazon, using eyesight and a bit of maths. Both of which arent so good, so if its a little inaccurate i do…
Prefer print thread area for layer height smaller 0.16 for the overhang of thread, 0.12 will be great. I use varies layer height in superslicer, I print other layer at 0.22 height. I use ABS so I can put the spool in the filament dryer.
A physical reference tool for students learning CAD and 3D printing. It helps turn dimensions on a screen into something you can actually see and touch. Includes: 200 mm ruler Hole diameters Wall thickness Gap / slot width Text sizes…
Just change the scale to print the size you need. Works better the bigger the cat. No supports required. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content.…
These are some butane lighter refill adapters/nozzles. The nozzles that came with the can of butane never fit my lighters quite right, so I made my own. I had the best results when they were printed with a 0.25mm nozzle. Note that there…
Pealess referee whistle with 3 chambers. Sound power level up to 120 dB. The frequency should be 3520 Hz +- 220 Hz. Print with support touching build plate only. (Check your slicer settings) Print Settings Printer: Anycubic I3 Mega Rafts:…
This model is intended to be used as a CAD reference in designing cases and peripherals for the Raspberry Pi 5, as I could not find another model to use for my own designs. This model is by no means exact, and measurements for components…
Versions April 2nd 2026: v2.12 improved geometry on the outside of the foot (less buckling) better print orientation and support placement Opening the Project I'd recommend downloading the .3MF project file and opening it in PrusaSlicer.…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
This is a single component file with enough detail for developing cases, projects, and peripherals for the Pi Pico 2W. This is not a PCB file, nor is it representative of all surface-mount components- many tiny capacitors, etc. were…
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
I had a co worker ask me if I could make some reusable wedges for him on the 3d printer. Instead of looking for a model that was already availble I descided to design one that has features I would want in a door chock. I printed this in…
Hi, I always wanted an affordable, uncluttered and reliable mechanical pencil that I can always carry with me. This is the 3d printed solution I came up with. It's a simple mechanism, allowing you to adjust the length of the leads using…
Refrigerator Can Holder holds 10x 330ml drinks cans (see Print Instructions , below, if your cans are a different size). You put the cans in the front at the top, they roll to the back, drop to the bottom then roll to the front so you can…
size chart: --- Filament: Recreus 82A, 3Dfils 85A Use TPU 95A first --- Orca Slicer / Bambu Studio settings: Global - layer height: 0.2mm - line width sparse infill: 0.6mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 -…
AirTag Bike Mount / Reflector Apple AirTag is a fantastic little device, and I wanted to be able to use one to track my bike in case of loss or theft. There are expensive accessories out there, but I wanted an inconspicuous, stylish, and…
Suitable for color printing Outer diameter 10mm The inner diameter of the dot is 6mm Height 2mm Layer height 0.2mm Magnet with a diameter of 6 mm and a height of 1 mm (magnet holds without glue)…
A remix of @BPmakesthings Howling Wolf Low Poly Model. Pictured: Right is original version printed at 100% scale, Left is slim version printed at 150% scale. Printed at .2mm layer height, 3 walls. There is not much infill in the model.…
Onshape document: https://cad.onshape.com/documents/d61dee32ee29272d4de3c193/w/de3416779f49ff1e82f67b0c/e/bceac7a90f13b0e0e9732da6?renderMode=0&uiState=6570b5d942c1be02b0211471 Updated June 3rd to include the cable clip as requested…
Description This upload contains several CAD models of electrical switch components compatible with Busch-Jaeger Reflex SI . All parts were independently modeled based on real measurements of existing components. They are not original…
This thing is a reference model of the Official Raspberry Pi 7" Touch Screen Display. The parts modeled in this thing are available here: *This site contains affiliate links for which I may be compensated Official Raspberry Pi 7"…
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
This is 3D printable model of the NX Refit NX-01 Enterprise from the Star Trek. It is a kit and does not require any glue. The different colored parts are separated for easier printing but some painting is still required. For the…
A clean rhythm for daily brews. This modular, refillable tea bag dispenser is designed to balance functional clarity with thoughtful form. Tea bags load from the top and dispense smoothly from the bottom, echoing the efficiency of a…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
Fusion 360 Download Link: https://a360.co/3Fmr4Ch This model is intended to be imported into Fusion 360 to design around. It is based on my measurements because the Apple Pencil currently does not have any published engineering drawings…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
This simple spool is used to eliminate the need to throw away a filament spool each time you purchase filament. Filament refills are readily available and easily drop onto this refillable spool. Print spool parts A and B and put them…
This is a really simple print that needs no support. Thanks to input from Printables user faqiu who suggested making a shorter version, I have uploaded two alternative sizes to the original 240mm long model - 200 and 160 mm. I use the…
I drew up one of my containers of snus in order to practice my cad skills but also so that we can incorporate these plastic containers that would usually go to waste into our designs I'm not sure how useful the stl file is but the step…
This is a Maltese cross I designed for a retired firefighter. I printed in Prusament PETG signal white. Temps were 250c nozzle, 85 bed at .15mm layer height. Turned out really good! Hope you enjoy! Update: added the design for anyone who…
size chart: --- Filament: Recreus 82A, 3Dfils 85A Use TPU 95A first Nozzle: preferably 0.6mm, especially with softer filaments --- Use the Orca Slicer or BambuStudio 3mf You migh also download the “gcodes.zip” folder and print the…
Accurate CAD files of the XL7 frame parts created from measurements and reference scans. Not 100% perfect, but close. This is from the cheap version of the XL7 frame found on AliExpress, eBay, etc., not the iFlight version, so I can't…
Here's a reference model of CMMG 22LR conversion kit, brass collar version. Accurate enough to design parts interfacing with it. It is not designed to be 3d printed, and making it functional will require major modifications. Check out my…
This model is made as a part to teach students how to get into fusion workflow. Also how to be the part of printables community. Reimagined og figet toy.
Test dummy model based on a 6ft tall male with average proportions. Model set as public domain and free for any use.
A fun little fish-shaped refrigerator magnet! The fridge magnet is actually quite strong because it uses (3) 6.4x6.4x2.5mm neodymium-iron-boron (rare-earth) block magnets, which are embedded in the body during printing (shown in the…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
This is a replacement for the awful button style water dispenser in some Whirlpool refrigerators. There are two models attached, a “standard” and a “extra." The standard one may not depress the button due to flex in the model based on the…
Inspired by https://www.printables.com/model/196949-spider-man-web-only-lets-retract No support needed !
Just made some small cosmetic changes to this fidget ring that I liked. The spinning part had too much wiggle room for my liking, so I cut off about 0.5mm on the height. This gives it enough room to spin while still keeping it aligned.…
Reference 3D model of Insta360 X3
16mm Gardena Gasket optimized for FDM printing by giving some more inner spacing. Can be printed in TPU 95A. But softer Flex material is advised. 16,6mm diameter for water tight function when printed cleanly 11,9mm inner diameter for easy…
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
Lego Feuerwehrmann / Lego Firefighter
A refined selector, with smoother filament paths and a robust blade holder. Someone raised the point that when you run out of filament, the return pathway is still quite problematic. However, as you will only need that return pathway when…
Hi, I made this adapter to use the refill filament from esun on the Bambu refill spools, made these with snug tolerances so when using the AMS the filament doesn't spin freely and cause an issue. Edit: Added a new version that allows you…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
I made this because health class got boring. Nuff said. Just kidding……. kinda This is a fidget I made to be easily printable, low material, and a fun time for your cat. ] Print at low infill out of TPU or PLA. I recommend less than 5…
This version of the Skyrim Iron Helmet is altered to make it more practical to actually print full size and wear. Video game models are unfortunately not optimized for real-world wearability :) The walls of the helmet have been thinned to…
These simple and compact holders may support Scenario reference, Act and Agenda cards, with a tray for doom and clue tokens. They can also be used with any board game featuring american-sized cards. Print two large holders and one small…
Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!
A refill adapter to fit my lighters.
This model was design for looks and not function. All the parts were printed separately and glued together. I used a stainless steel peel and stick for the body and doors. I did do a lot of sanding and smoothing on the printed parts to…
Simple model the size of a US quarter. I use this as a reference model when I am scaling models during slicing.
We’ve developed this Revo-compatible cold side in collaboration with Team Voron. It’s intended for use with the Voron StealthBurner, which includes an integrated cold side fan. It’s compatible with our Revo ecosystem, so you can change…
Spool for using with Rosa 3D filament refill. Print twice push it firmly to the both sides of filament refill.
This is a reference model of the A2212 Brushless quadcopter motor. This model's not meant to be 3d printed but should hopefully save some people time designing other stuff. You can view/download the Fusion 360 project here...…
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand , specifically his model 2 version. He used screws to install pins to hold the stands in…
Very simple and easy refill-adapter for Sagrotan/Dettol NoTouch soap. no drilling or adding parts to the container needed – the soap container stays unchanged. Simply install the Adapter to the refill bag. It fits the 12,3 mm thread of…
parts required 2 x M3 socket screws (15 to 35mm long) 2 x M3 washers OnGlass Mk3 is a compact articulated lens hood, designed to block out reflections when taking pictures through glass. It also allow the camera lens to be tilted up to…
About This is a lightweight universal reusable spool for refills that screw together and center the refill core, using thin flexible tabs. They're used for centering but not to fully hold the spool so make sure you screw the two spool…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
-Two colors -organic support -0.15 layer height
Refined the original by gcb, making it looks way more similar to the switches I got in 2020. Still not perfect, but it's a good starting point. Fusion360 file attached alongside the OBJ.
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
If you read this, please leave a ❤! While using my original design I noticed it was difficult to grab onto the build plate with one hand. The caddy was in the way! I've mirrored the design so it mounts on the back of the plate instead of…
Hier das Feuerwehrlogo für Colorchange Farbdruck. The german firefighters logo for colorchange.
Print in ASA or ABS. 30% infill , no supports. Activated carbon can be purchased in kilos on the Internet and in aquarist supply shops. Edit- At your request , I have added a version with smaller mesh holes for the smaller 'Nevermore'…
Provides several different gridfinity bins/widgets that can be used to create desk-valets or pocket-valets. While these should work well with almost any gridfinity baseplate they are designed to work best with the “ Gridfinity Refined ”…
Print the funnel upside down (like a pyramid) with no supports. You will need to rotate the disk back and fourth as you fill. You can brace the funnel against the PowerDisk by pushing on the part of the print that extends next to the tip…
