Counting matching models…
This is sized to fit on the 300mm version version. you can use the front A and B skirts from the 250mm version. This should fit the Voron 2.4, 300mm by using the shorter front A and B skirts from the 250mm version. This took me about 6…
Loudspeaker enclosure with aperiodic (resistive) vent to avoid harmful resonance of insufficient air volume. Inner surface consists of two types of quadric surfaces (parabola and ellipse) that share common locus. Aperiodic vent can be…
I designed this case for the 7" Waveshare touch screen for use in my Smarthome system. The following parts are required to complete the display: 1 pc. Touch Screen ( Link ) 1 pc. Rapsberry Pi (see above link for supported types) 8 pcs. M3…
Waveshare 4inch Resistive Touch Screen for Pi cover / case
No matter how hard I tried to glue the broken touch pen of the Vickers hardness tester, it did not last long. So I decided to make a new one by modeling the same one. The tip section is thicker than the original so that it is easy to…
I used the M2.5 8mm standoffs and 4mm M2.5 screws that shipped with the display on the base, and 16mm M2.5 screws to mount the frame, display and spacers onto the base. The holes on the frame have sacrificial bridging so you will need to…
This is a modified remake of a Raspberry Pi 5 case originally designed for the Waveshare 3.52" e-Paper HAT setup. After printing the original model, I realized I was using a different display revision than expected. To make it work, I…
I couldnt find any CAD files online for the Waveshare 3.2inch Resistive Touch Display (B), 320×240, SPI, so I made a rough model myself :)
This stylus is based on the stylus that came with a tiny 3.5" resistive touchscreen I bought many years ago. The stylus should be printed laying down on the flat side, with support under the tip only. It can be mounted horizontally, or…
Flat stylus for the resistive touchscreen on my NanoVNA. Pictured is printed in Polycarbonate but any material harder than TPU should work just the same.
The Resistive Touch Switch is a cost-effective accessibility switch, an assistive device used by people with physical disabilities to control electronics (e.g. phones, computers, adapted toys, game controls, etc.). The device is activated…
Overview: This is a custom-designed mount for the Waveshare 3.5-inch Resistive Touch Display (B) (or equivalent clones) specifically tailored for Voron 2.4 / Switchwire / Trident printers. The design focuses on a clean look, easy…
