Trezor Safe 3 screen protector
Simple screen protector for your TREZOR model SAFE 3.
- Downloads
- 102
- Likes
- 4
- Rating
- 0
63 models
Simple screen protector for your TREZOR model SAFE 3.
Trezor Safe 3 Stand Enhance your workspace with this minimalist stand designed specifically for the Trezor Safe 3 hardware wallet. The stand provides a stable base, keeping your wallet easily accessible and stylishly displayed. You can…
Printed case for trezor model one hardware wallet with included space for usb cable. Four M3X18 bolts are needed. Lock pin works better if printed in PETG for better flex. Lock pin is then glued into the top part of the box. There is…
Cover for Trezor model T Joint of both pieces by 1.75 mm filament string. 2 versions: with clip and without. Cover exist in: multi-color version with Trezor Logo single-color version without Trezor Logo Magnet used for lock cover has…
Simple bumper for Trezor model Safe 3- Lets try.- 0.2mm resolution and TPU is recommended.
I like this model: https://www.prusaprinters.org/prints/63282-trezor-model-t-case wanted a snugger fit so wallet doesn't rattle around wanted hole for USB cable wanted print-in-place because it is cool new feature - more contour magnet…
Trezor or Ledger stash box with holes for mounting in secret locations. Designed to fit the shipping foam that comes with the Trezor. Fits the micro USB cable that comes with the Trezor as well.
Simple dock or stand for Trezor model one with btc logo. easy to print, no supports needed
Box cannot be opened without breaking it. This makes it easy to store your recovery key and identify if it has been messed with. Simply pause the print when getting to the crease at the top and insert your paper. The key should sit well…
Printed with TPU this case will fit your Trezor Safe 3 snuggly and offer a modicum of protection. In addition it has holes for a lanyard. Printed on a Prusa MK3S+, with 15% infill, Supports everywhere. I like to use a .3mm contact…
Printing suggestions: 0.2 mm Layer PETG filament Grid infill with at least 20% density What do you need: M3x8 screw (6x) M3nS nut (6x) TREZOR Model One Assembly: From the inside of the TRbase, insert six M3nS screws into six holes. Place…
I noticed a severe lack of cases for the Pi Trezor, and especially one that would fit my setup which uses the waveshare 1.3 inch OLED hat . This case is snap-fit, so your printer will need to be able to handle tight tolerances, but as…
Update January 14, 2024 By request I have made part one in a hard filament version as well, this means you can print it without using TPU. I've not yet tested this version myself so keep that in mind. Support All my designs and mods on…
printed on an Ender Pro 3 S1 printer using hyper pla
Holder for Satoshilabs Trezor model T. You can mount and hide your trezor under the bed, table or wardrobe. You will need 4 pcs of 3x12mm screw for montage.
My desing of rezor blade wall holder, just use 3M Tape to mout it. No need to drill anything. Easy to print
Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…
Protect case for satoshilabs Trezor model T, easy print, no supports
Software and assembly video here: Case is ideally held together with 15mm M3 self tapping screws. Electronics Used (Including Purchase Links) DIYMore STM32F407VGT6: https://www.aliexpress.com/item/1005002186031065.html 2.42 SSD1309 SPI…
Trezor Safe 7 – Official 3D Model This package contains official 3D model of Trezor Safe 7 , provided to support the community in designing and 3D printing custom accessories. The model is published to make it easy to create stands,…
Dock or stand for hardware wallet Trezor model T
I chose a generic hinge case as the basis for the model as it's dimensions closely matched that of the Trezor device. I unfortunately didn't bookmark that file but if I do find it again I'll link that base case here. Dimensions have been…
I modified @RustyNutsDesigns' great model in its height to fit a Trezor Keep Metal recovery seed wallet backup. No support, 3 wall lines, infill 15% recommended.
This mount can be used under a desk for a concealed, yet accessible, storage solution for the Trezor Model One. It might be a little tight the first few times inserting and removing the Trezor Model One from the mount. This should become…
Case for Trezor Safe 7 with privacy-filtered protective glass. Uses M2 screws.
Trezor Model T protective case with magnet latch.
Dokovací stanice pro Trezor je multifunkční pomocník pro všechny, kteří pracují na denní bázi s hardwarovou peněženkou Trezor One, Trezor T, Trezor Safe 3 a Trezor Safe 5. . Běhá vám Trezor po stole? Při každém potvrzení ho hledáte na…
Remix of Azriel_80 of Trezor Safe 3 Pelican Case over on Thingiverse now for Trezor Safe 5. Uses a Pelican G5 Personal Utility RF Field Wallet.
Software and assembly video here: Case is ideally held together with 15mm M3 self tapping screws. Electronics Used (Including Purchase Links) Waveshare Core405r: https://www.waveshare.com/core405r.htm Waveshare 2.42' SSD1309 SPI OLED:…
Case for Trezor One using original foam from the box. I recommend printing the top cover slightly smaller, to ensure a tight fit. I made it with a rather big clearance. If you don't have the original foam from the packaging, here is a…
A carry case for the Trezor Safe 5, with a couple options for attachment and face styles. The carrier has variants for a small carabiner or keyring mount (5.5mm hole) or a strap (up to 30mm wide). There are two face plates: one that…
For use with my modified Trezor One board with USB-C https://github.com/Gigahawk/trezor-hw/releases/tag/v1.1_USB_C_v3 The -solidworks files are an alternate design of the outer case that will require supports for the USB C hole, but will…
A simple snap-on case for the Trezor Safe 7. IMPORTANT: Set supports to 'Everywhere'. After printing, remove the supports beneath the bezel of the logo hole on the back of the case. 15% infill. 0.15mm layer height with 0.4mm nozzle. PETG…
Trezor Safe 5 – Official 3D Model This package contains official 3D model of Trezor Safe 5 , provided to support the community in designing and 3D printing custom accessories. The model is published to make it easy to create stands,…
A trezor stand I made years ago and forgot to share. Got a cheap micro b cable from amazon but the original one works too. Print face down for the best look. Made with Shapr3d https://www.shapr3d.com/ Please leave a like and rating,…
case for model 3, with Trezor logo instead of the bitcoin logo. also cleaned up the model to get rid of that pesky second layer overhang that was giving me grief while printing on both upper and lower portions. to get the different…
Trezor Safe 3 – Official 3D Model This package contains official 3D model of Trezor Safe 3 , provided to support the community in designing and 3D printing custom accessories. The model is published to make it easy to create stands,…
Vesper Vault brings the architecture of a ruined Gothic chapel to your desk. Three staggered open compartments provide space for pens, brushes and small desk items. A tall rose-window wall, pointed arches and a front gargoyle relief…
A minimalist, threaded protective case designed specifically for the Trezor Safe 3. Print Settings: Nozzle: 0.4mm Layer Height: 0.16mm Print Time: ~1h 35m Material: PLA Filament Used: ~32g The included .3mf file contains the exact…
Software and assembly video here: There are two sets of parts for the top+bottom+buttons depending on the screen size you want. Case is ideally held together with 12mm M3 self tapping screws. Electronics Used (Including Purchase Links)…
Allowing the use of this fine model that fits together really well to store your Trezor Safe 3 device. Printed on a smooth or textured plate, PLA no support 0.2mm layers. Print time approximately 35 minutes.
A stealthy 3D-printable replacer for the express card slot that can hold your crypto wallet. For this to work you will have to remove the plastic shell from your trezor, this can be done via razor for example if you slice along the sides.…
Upravený model od autora Rocco's stuff. Pokladnička na české mince - 5, 10, 20 a 50 Kč. (občas dvaceti koruna skočí do políčka pro padesátikorunu.. záleží na rychlosti) Krom upravených modelů ke stažení zde je třeba stáhnout zbývající…
Krytka na trezorový klíč se zarážkou proti stažení. Konečně mi tento klíč netrhá kapsy a navíc se neoklepe o ostatní klíče, takže jej nebudu muset opět měnit.
This is a replacement for the original foam insert your Trezor Model One came in. It is meant to be used with Dominik Pechac's Trezor Model One Case: https://www.printables.com/de/model/76618-trezor-model-one-case-c
0.20mm layer height no supports 3 wall lines recommended you'll need 4 magnets 8x2mm and some glue
I created this case to store my Trezor and short cable that comes with it. It snaps closed and works great for me! I also have a multi color printer so I created the lettering separate from the model. I combine then in the slicer. I did…
Fits perfectly with the protective case, but it also works without it, although there is a little more play.Fits perfectly with the protective case, but it also works without it, although there is a little more play.
IMPORTANT: You need to print out snap-on cases for your Trezor Safe 7 and Ledger Flex as this stand is sized to fit. You can print them out here: Trezor Safe 7: https://www.printables.com/model/1762192-trezor-safe-7-case Ledger Flex:…
Gridfinity bin for the Trezor Safe 7 and the original charging USB cable. Generated using “Gridfinity Rebuild in OpenSCAD,” with the official “Trezor Safe 7” model as a reference. There is a cutout on both sides of the hole for the…
Studenti si sestaví mechanický trezor a poznají, jak vypadá historická konstrukce zamykacího mechanismu.
Round case for the Trezor Safe 7, also holds the USB C cable. Can be wirelessly charged while in the case. Trezor is held with a friction fit which might be a bit tight at first, as well as the treads for the lid.
this is eazy holder compatible with trezor save 3 5 7
A mount for Trezor-T to be handily available next to your monitor. I prefer placement on the left side. Apart from printed parts there is a 1.5 mm thick carbon-fiber rod that works as a lead for the USB cable the Trezor T is connected…
A small desk stand for the original Trezor One, the micro-USB one. It holds it at about 60 degrees so you can read the screen and press the buttons while it's plugged in. The pocket is for a 60 x 30 x 7 mm device and there's a slot at the…
Krytka zámků pro trezor Kovona. Slouží jako náhrada příruby přídavného zámku, nebo jako náhrada chybějící krytky. Průměr 76mm, díry na čtverci 23mm. R"zné trezory mají díry jinak, pak doporučuji udělat vrtačkou a zahloubit. Budete…
Description A sculpted Gridfinity 1×2 dock for the Trezor Model T. The original USB-C cable runs fully hidden inside the stand and leaves at the bottom of the back corner. No adapter and no 90° plug needed. Trezor Model T Gridfinity Stand…
I chose a generic hinge case as the basis for the model as it's dimensions closely matched that of the Trezor device. I unfortunately didn't bookmark that file but if I do find it again I'll link that base case here. Dimensions have been…
A minimalist, threaded protective case designed specifically for the Trezor Safe 3. Print Settings: Nozzle: 0.4mm Layer Height: 0.16mm Print Time: ~1h 35m Material: PLA Filament Used: ~32g The included .3mf file contains the exact…
Gridfinity bin for the Trezor Safe 7 and the original charging USB cable. Generated using “Gridfinity Rebuild in OpenSCAD,” with the official “Trezor Safe 7” model as a reference. There is a cutout on both sides of the hole for the…