Counting matching models…
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Spiky Sensory Trigger Twisty Spiral Roller This Spiky Spiral Fidget Roller is engineered for dynamic sensory play, featuring tightly patterned geometric spikes that wrap around a twisting core. As it rolls, extends, and shifts in length,…
This is a remix of the awesome Joe's V4 spray handle , which is a remix of thefilamentcorner I removed the logo from the sides Print at a high infill % - I used 70% and its feels very solid. It fit all the spray cans I have laying around,…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…
I liked this handle, but the trigger is too long. I decided to make a shorter version to use only 1 or 2 fingers to pull it. This way it allows a better and more stable grip on the handle. You just need the "Trigger_Short.stl" file, the…
V3 Update: Removed the sharp part on one side and added reinforcement to the top and around where the spring seats. Also used the reinforcement to lay the part down. I have not tried this yet, so not sure if a raft or support would be…
*UPDATED 12/27/2024: The “Fix Model” warning has been resolved. Safety first! Rule #3: Keep your finger straight and off the trigger until you are ready to fire. I scaled mine to 122% to fit my G.I. Joe Classified and Action Force gear.…
I have not FDM printed this model yet, but did have good results with a ps3 button I did years ago. I SLA printed this model out of ABS-like Prusa Resin for a custom project I did and thought the base file I made might be handy for…
Trigger buttons for the Ayn Thor, printed on 0.08mm Extra Fine preset with tree supports. Fixed the friction between triggers and shoulders. Enjoy!
created a print-in-place trigger locker for my dyson because its very annoying to push the trigger the whole time. Tested it with the v8 and v15 but should work with others too. Tried PLA and PETG. Both worked fine. No Support needed.
Relieve tension in the head, neck and shoulder muscles and improve posture, eliminate tension and relieve pain Place it under your neck where the skull ends and GENTLY lay on it to relief neck muscle pain and headaches. You can use the…
The objective of this build was to explore and understand trigger mechanisms. In particular, how to achieve a light but reliable lock mechanism and one that re-cocks both the trigger and the bolt in one motion, so that a true ‘lock &…
This is a remix of Corefile's No Logo version , which is a remix of Joe's V4 version , which was a remix of FilamentCorner's version. My only complaint about the original versions of this handle was the length of the trigger. I like to…
I liked the spray trigger gun, but noticed the author mentioned about how strong the trigger was due to splitting at the layer lines, and he referenced people stating it was failing due to this. I think it's cool it was print in place,…
The handle should now work for cans with smaller caps, such as this one. Have fun with it and please share your makes :)
Enhanced Trigger Guard for the fingy that do the worky
Very simple vacuum cleaner trigger lock. No additional materials needed. Holds very well due to the tight fit between the finger rest and the sloping bottom of the container. I expect minimal wear due to the default position without load.…
My own creation from inspiration of several models out there. I wanted something that would lock the trigger to an ‘on’ position yet allowed my finger to still use the trigger without significantly hindering its original operation. Also…
Like Rilot's design, this model attaches to the lip below the trigger but leaves much more space for normal trigger operation. The lock can be flipped using a single finger allowing for one-handed operation and you can easily switch…
You can find the original model HERE with the proper printing instructions. This is the version 1 revised ‘strong’ model of the gun. .F3d file included *
I was disappointed with the other offerings for the A-180. So, I built one with 3D printing in mind and a working trigger! To improve on its aesthetics, I wanted to have a few parts to assemble after printing. It should be obvious where…
The original button breaks if pressed with force, in this reinforced version I added a thickness to increase the resistance to pressing the button. February 20, 2025 - New retopologized and more strengthened version at the following link:…
Adjustable blade trigger for AAP 01, should fit WE glock to. 3mm grubscrew for adjustment. Suggest to print it laying down.
I first printed this design in PETG with 5 walls and 40% infill and it held up great for about a month of moderate use every few days painting with several different cans of paint, the teeth sheared apart at the layers ultimately failed.…
Private 13 is a soldier themed custom part set for soozafone's Dummy 13 1.0 action figure. The set currently includes: Scar-L - The well known and versatile NATO rifle, now for Dummy 13 to wield Helmet - A custom head for Dummy 13…
BOM Part # Photo M2x10 or M2x12 screws, self-tapping, countersunk src 1 src 2 src 3 , assorted src 4 , assorted 4 USB-C PD Trigger Board with DIP Switches amazon.com src 1 , verified src 2 src 3 src 4 aliexpress.us src 1 src 2 src 3 1…
Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE
Printed in PETG with hotend temperature at 235 degrees, 100% infill percentage, printed with supports.
Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…
I - like many people - was annoyed by the lack of a trigger lock on the V11 series. I tried many solutions to this; some community and others commercial but all of them came up short. They either were a piece that I would lose, or they…
Flat trigger for the glock, i've tried it on the TM and WE platform, don't know if it fits the others. Print Settings Resolution: 0,12 Infill: 100 Category: Other
Just my version of the Dyson V10 Trigger lock. Push hinge upwards till lock in place. To release, press trigger in and hinge should drop .
R2 and L2 replacement trigger for the SCUF gaming infinity fps controller PS4. I had a broken trigger, and i modified the standard triggers for the scuf controller. it could need a little bit of sanding. Mirror the part within your slicer…
A 3 part system which works on extremely simple spring mechanism! Printed in PLA. Layer height : 200um / 0.2mm Walls - 6 (minimum) Useful for anyone with small hands / kids. Also useful for people having clenched fist syndrome or more.…
Trigger button for the dyson v8 vacum. i printed it in esun abs+
Download the Installation guide and read carefully before taking on this modification. Go to the files tab page and scroll down until you find the PDF file for the installation guide. This extruder requires you to remove material from…
Introducing the Universal Flight Sim Trigger Module by @TheSimNet! Featuring: Dual or Single Stage operation Authentic operation Consistent return force Satisfying break action click Parts required: Mini Micro Limit Switch 5A 125 250V AC…
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
Just a simple cover for airbrush trigger because the edges are sharp and my finger hurts when pulling the trigger
2/9/23 - created a v2. Added better supports, can see more HERE A quick jig to hold your Glock Trigger for maintenance and / or training. Kinda cool to pull the trigger and see how things work. I print the pin round side on the bed with…
just a simple trigger for this kind of cheap airbrush. i modeled this for right hand use, obviously you can mirror it in your slicer to make it better for left hand use. its a fast print that does not need supports
After the release of the SLAB, I decided that I might as well try my hand at designing a trigger for something other than the LYNX. This may require support on the underside if printed flat, as there is a raised section for a cosmetic…
This remix from pixelauthor's SN30Pro+ Trigger plate. pixelauthor's version has a profile that allows the same trigger plate to be instaled on both left and right R2 button. However the one downside is the trigger plate profile does not…
Since my original flat triggers for the Orion Blasters Lynx were so popular, I decided to make a couple more for people to enjoy. The Lynx_Speed_Trigger has a similar feel and pull to the stock trigger, if you prefer that kind of trigger…
Hi, I designed this tool for a esier installation of the trigger spring. Its designed for the CZ Shadow 2, but it should work also for other CZ models. The tool holds the spring and is more suitable than pliers.
With the little massage helpers, you can loosen stubborn trigger points. They are shaped like a human thumb and allows you to tread your trigger points in a targeted and effective way. You should of course know what you are doing. ;-) I…
This Wiimote lighgun version includes gun sights and a modified trigger to add a pen spring for improved trigger action. With the gun sights, you can turn off those pesky onscreen crosshairs; for games that support that feature. Cheers!…
A redrawing from a photograph of a short-throw trigger. The main printing challenge lies in the blind recess in the center—it is best printed on supports made of special material, both the body and the separating layer as a whole.…
This is a direct replacement for the 10/22 trigger. I have the upgraded trigger housing, but this should fit the standard one from pictures I've seen, can't confirm though. The holes are tight, so you have to drill them out with a 1/8"…
A trigger shoe for the Game Face Trion dart blaster. I found the flat faced trigger to be uncomfortable, especially given the heavy pull. this wide and curved trigger shoe spreads out the pressure felt by your finger. Snap-on part. must…
I really liked my ssx23 holster, so I got a similar holster for my Glock, and I made it the same principle From what I've tested, it fits, WE Glock 17, WE Glock 18, WE Glock 19 There are 3 included files. Holster Trigger Piece Holster…
Update: Added Fusion source file for remixing. For clarification the shims are slid over the main trigger body to make it fit better on thinner phones. Big update: This design now uses a shim system for thinner phones. This way I can…
I wanted the trigger lock switch by Ondrashek for my Dyson Outsize, so I remixed it with crash720's trigger lock model to clip on and fit snuggly around the handle of the Outsize and be able to switch the trigger when required. I found…
Made the model from Rilot actually work with a V10. The V10 design of the trigger is quite a bit different from the V11. You can use this free hand (as original) and with trigger lock. Printed with PLA on a 0.6 nozzle. Some sanding was…
A 3 part system which works on extremely simple spring mechanism! Printed in PLA. Layer height : 200um / 0.2mm Walls - 6 (minimum) No supports required Brim may be necessary (use glue on PEI sheet instead of brim if required) Print in the…
Heres a basic case I made for a cheap USBC PD Decoy Board, very cheap on Aliexpress. I'll add a pic of the one I used and also post a Aliexpress link. It supports 9, 12, 15 and 20v, although not super easy to change between as you have to…
A improved version of Ultrasonic2's "Nerf Stryfe Trigger V5". I added a cutout in the back and shortended some other things which interfered with the stock shell of a Nerf Stryfe. This i a remix of a model by Ultrasonic2 .
Trigger Lock for Karcher Pressure Washers * WARNING USE AT YOUR OWN RISK * Locks the trigger in place for extended use. Has a hole to thread a string through. Tested to fit K2 and K7 (probably fits other models too) Print Settings Printer…
I wanted to substitute the barrel jack on my DPS power supply with USB-C PD but didn't want to redesign the whole case, so I made this adaptor that fits in a 12mm opening like a lot of panel mount switches. For the PDC004-PD trigger board…
This is a simple quick'n'dirty trigger lock which I designed for my Dyson V11, it also works with V10 models. Just slide it in if needed, the trigger gets pushed automatically and the part should stay in place just so. Print orientation…
PLEASE POST YOUR MAKES! So I love my little PS90. The trigger was not to my liking so I ordered a K&M Trigger Pack Spring and the P*****d Pawn Creep Killer II (unmodified hammer version). I wouldn't normally freely release something…
After spending some time building diy Drum triggers, I created this one. This solid should work for most toms and snares. Cut up a sponge and glue a piezo on it. When mounted on a tom you can use it to trigger a sound from your drum…
This 3D-printed case is specifically designed for the MRA193A PD Board, a USB Type-C voltage and current tester supporting 5-20V adjustable charging. Pinterest The case provides robust protection while allowing easy access to all…
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
I got halfway through A Link To The Past before the controller-to-hand ratio became a problem. So… I tried them all. Every single available SNES grip model on the internet seemed to have some kind of problem that made it worse than using…
Case for MRA193A USB type C power delivery (PD) trigger board, available for very cheap on sites like AliExpress, eBay, etc. Uses minimal filament and snaps together easily. I printed it in PETG with variable layer height and "standard"…
Parkside PHPA 20-Li A1 Hot Glue Gun Trigger Replacement for a very common problem these guns have. I made it with PETG and recommend to use it but you can also use PLA. I used a BambuLabX1C, 0.20mm Strength, 25% Honeycomb Infill.
Mod kit to convert the Venom Pro from palm rev to a two stage trigger rev. Requires printed parts A new switch Soldering
Same printing steps as the original
Due to heavy use (by the kids ;-) the double action path, the nipple on it is always broken… to remake the trigger leaf spring more sturdy, the trigger feels now smoother, and the - best of it - the nipple doesn brake anymore. so here the…
Red trigger safety compatible with Glock pistols. Very easy to replace.
Love this catapult but it needed a trigger so that you could load, aim and fire more easily. Pull the catapult arm back and it locks in the trigger, pull the base apart to release the trigger and fire. Prints flat just like the original,…
This is an adjustable endstop for the Anycubic Vyper. Since the bed on the Vyper is not adjustable, you can use this to adjust the z endstops on either side of the printer to have a better bed leveling. The lines show the factory height…
This is a remix of an efficient trigger lock but without any screw. Just insert the trigger and plug the 2 parts on your V15 and it's done. No need glue. Perhaps you need to paper sans a little bit the clutch and the hole to insert the…
A hair trigger for the Nexus Pro and other similar platforms, since I felt that the stock trigger pull had a sloppy feeling. Added bonus in the trigger lock removal, that now enables You to safely de-prime the blaster. The safety is still…
I designed this to suit my model OLM1836H, but it may suit other models. This orientation is for the Right Hand Side, but mirror if you need the left. PLA will work, but may have a limited life, I recommend printing in ABS or PETG and use…
I have designed this for self massageing your back with trigger points. It helps to get rid of painful hard spots in your shoulder, leg, arm, back etc... accupressure Back electro_mobility Massage mobility Point Pressure tool Trigger
Uses same 6mm magnets as the original.
Tactical hands for the new Carbon 13! Now your Carbon 13 is less likely to shoot themselves in the foot! I wanted to take a small break from designing my tank model, so I made this. It is inspired by its Dummy 13 counterpart, which you…
I had the pins on the right Trigger broken off, and made a small model to fix this issue. Was printed on a Resin printer, and glued into place. This allows the tabs themselves to still flex a little bit, so you can insert it from the top…
Simple gopro (chin) mount for ixs trigger ff helmet. Optimized for minimum intrusion inside the chin guard, since there is not too much space between the helmet and my chin there. Print preferably with high infill (>80%) and in PETG, ASA,…
Fishing rigger has 5 parts cap, upper side, lowe side, tube, and distance tube
Remix di fortnite pubg free fire _ Pulsanti trigger telefono fai-da-te L1 R1 di Proyectatumente Video dimostrativo per il montaggio Print instructions Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes…
This is a recoil trigger for the LabRadar chronograph. The box is designed to hold a vibration sensor, magnets, and a 3.5mm audio cable. Thin walls and magnets help the box stick to metal and also keep the box closed eliminating the need…
An expandable SNES game cartridge shelf for the desktop. I wanted something for my desktop that would slot individual games, that held the games a slight upwards angle, would always be full, and would never run out of room. You can expand…
This is just a quick model of the device but is not yet complete or accurate. Stay tuned. Check out https://www.therpf.com/showthread.php?t=294955 for more info.
For an art project I needed a lightweight way to trigger spray cans with a motor. I am using a very lightweight (9g) SG-90 servo motor made for remote-controlled hobby planes. The trigger requires a lever to put enough force on the cap of…
Ich fand das tolle Design von FrankBer sehr nützlich und habe es an meinem neuen Kompressor DMP181Z getestet. Auch an diesem Gerät funktioniert es einwandfrei. Ich habe das Design ohne Schlauchschelle modifiziert, da am DMP181Z bereits…
Made this model kinda quickly and not professionally at all so there's still room for improvement, but I was able to get a good fit using a 0.2mm nozzle. Ideally a resin printer would be used but I don't have that. I've only tested the…
Loosen trigger points with this massager easier. I've created 2 sizes, 20mm and 30mm. If you need a different one, just let me know. Only use if you know what you are doing, avoid injuries at all times.
Gulikit King Kong 2 Pro lower trigger mounts
Feinwerkbau 300 air rifle replacement trigger. Printed with ASA and 0.1 mm layer height.
This is an update to the v0.01 version. Updates include: - Trying to optimize everything for printing with the least amount of supports possible. - Separating the side panels from the main body so the screws have actual function, as well…
Replacement throttle trigger for the Stihl FS40 string trimmer Assembly tips: Use a hack saw to cut the slot for the throttle cable to rest in (see top of trigger in assembled picture) Sanding of the pin may be required to fit into the…
could not find trigger stl so i made some, added fusion file if u want to edit it Category: Parts
Spray can handle made to keep your hands clean from paint. To assemble you will need: 2x M5 brass threaded inserts 2x M5x8mm screws (DIN912)
Faszien Trigger zur Muskelstimulation, gegen Verhärtungen und Blockaden
The process of installing this is easier than you'd think , I'd personally follow the IFixIt guide for disassembly and reassembly ( Up to Step 10 , Step 11 & 12 are unnecessary for this). I would heavily recommend printing this with a…
