Counting matching models…
This part can be ordered printed here: https://www.justway.com/project/shareproject/Reolink_RLC_520_junction_box_4e106271.html 3 variants of a junction box for Reolink RLC-520 cameras. The camera has 3 cables coming out its back, which…
Junction box for Reolink RLC 810A, 1212A etc.
This print is a replacement for the standard Reolink supplied ceiling/wall mount base of the Reolink RLC-520A camera. It may also work with the RLC-822A.
Simple junction box for reolink cameras RLC-1224A and RLC-520A (with included adapter). Square hole at the bottom easily fits crimped rj45 connectors so you can prepare them before installation of the junction box. I've attached the box…
To hide the cables of a Reolink RLC-811A and the conduit coming out of the wall, I needed a suitable surface-mounted junction box. There are two versions: round square (tested) The square version was tested and fits perfectly. Printer…
Designed for the Waveshare ESP32-S3 4.2" RLCD display module. Features: Precise fit for the Waveshare ESP32-S3 4.2" RLCD 70° viewing angle, ideal for placement on shelves, desks, or TV cabinets Easy access to USB connector and buttons…
This model is a Reolink RLC-811A Camera Mount for 5" Dutchlap Vinyl Siding. It will print with no supports. I needed a sturdy mount for outdoor use so I printed with 4 perimeters and 4 top and bottom layers out of ASA. Mounting hardware:…
Wall Mounting bracket for the Reolink RLC-420 dome camera. This is for cameras that need to mount on a wall but view through a window or other opening. Print instructions Print uses M4 x 20mm screws and nuts to mount the camera to the…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
Remix of Reolink RLC-520 junction box without hole on the side. All cables comes from the back side in this case.
This is a simple enclosure for reflective screen by Waveshare. no supports needed.
A mount box to hide the cables that come out of the RLC camera. This one is made for my RLC 820A but it will probably fit other models as well. You will need some M3 heat-set inserts to put into the holes. Alternatively just edit the…
Simple rain cover design to be attached with a (4-5mm wide) ziptie to the camera. It keeps the microphone hole in the casing free. Print in any material, but recommend PETG 0.2mm layer height for precision and durability. No supports…
This cover designed to be used with M4x16 bolts and nuts. I recommend printing it with PETG since it's intended for the outdoor use. I've attached the original CAD file (FreeCAD), so the model can be adjusted to fit various needs.
This print with the specified ¼-20 nut replaces the standard Reolink provided ceiling/wall mount base of the Reolink RLC-520A Camera with a base containing a ¼-20 nut for tripod mounting. This base also works with the RLC-822A . I modeled…
zur flachen Montage an der Decke, ersetzt die originale Halterung. es werden weiterhin die Originalen Dichtungen und Schrauben benutzt, außerdem bleibt der Stecker im Original zustand.
Reolink RLC-520 junction box - 60 degree angle
Simple snap-fit case for the Waveshare ESP32-S3 RLCD board. Gives a little better protection to the fragile reflective LCD. Leaves cutouts for the GPIOs, SD card and speaker. Leaves all three buttons accessible. Includes ports for the…
Simple spacer for stacking your RLC ( Hot Wheels Red Line Club ) Cars. No supports needed.
Designed specifically for seamless integration of the Reolink RLC-520A camera with both indoor and outdoor round junction boxes. This adapter facilitates the use of conduit systems or alternate mounting solutions, providing flexibility in…
This JB is a total of 48mm in height w/a 3/4" (19mm) side entry access hole, which allows use of the original Thingiverse JB Cable plug. JB also has a 5mm recess to allow the Reolink camera mounting plate to sit flush with the top of the…
German description below/Deutsche Beschreibung unten This specially designed mounting wedge enables a clean and secure installation of the Reolink Duo 3V under roof overhangs or inclined surfaces. Thanks to its angled design, the camera…
Cam Mount for Reolink Camera RLC 1224a and Dahua Water-proof Junction Box DH-PFA130-E. Printed with Bambu Lab X1 and 0.20mm Strength profil. 6 wall, 100% infill, support on plate. Category: Camera
Dies ist ein Adapter für die Reolink RLC-811A Kameras. Dieser Adapter wird an eine tiefe Standard-Unterputzdose mit Dosenschrauben angeschraubt. Anschließend wird die Reolink RLC-811A Kamera montiert. Stützen werden keine benötigt. Diesen…
Junction box for Reolink RLC 833A, 1224A.
Simple mount for a Reolink RLC-520 camera. It may fit other Reolink dome cameras which share the same 105 mm base with the three prong bayonet lock. It mounts to a 25 mm electrical installation pipe. (M25 KuPa-Rohr) with three zip-ties,…
Mount various Reolink Cameras directly to single gang US low voltage boxes. Notes: The Duo 2V Dome adapter is not a perfect fit, the shape is odd and I was running out of time to model this before installation. It is close though With the…
Reolink RLC-510A Camera HSW Mount (may work with others) Takes 3 x heat press inserts (~4.1mm diameter ones - the ones for 3M screws). Print upside down, suppressing any tabs you don't want. I printed in PETG, but anything should work.
Warning! Different stands for Premium and RLC! There is angle difference. Tested on settings: Infill - 10% top and bottom layers - 5 walls - 2 filament - Hyper-PLA
The Reolink RLC-410-5MP ring mount can be used as an alternative way of mounting your camera when used in tight spaces. This camera model by default comes with a wall mount that is attached to the rear of the camera body and this makes…
FINALLY! A cheap and easy way to stack my RLC acrylic case cars. This is a simple bracket that will allow you to stack any RLC acrylic cases on top of each other avoiding that annoying wiggle and slanted look.
This is a modification to a reolink wall mount, to fit my use case of mounting my camera on a 3cm thick board/ fence. I just added another plate and a top bridge/ panel so the camera can sit around where the top of the fence is.
I created this model because I needed to mount a camera to some industrial warehouse storage racks. Mounting to the wall was not an option, so this was the next best choice. It is designed to fit into the teardrop looking holes on the…
A simple enclosure for the Waveshare ESP32-S3-RLCD-4.2 board, consisting of two printed panels, M2.5 standoffs, M2.5 screws and nuts. More about the project: https://github.com/clackups/draftling Part list: M2.5*10mm screws: 4 pc (back…
I wanted a shelf to put atop my CyberPower BRG1500AVRLCD UPS so drew one up in Fusion 360 and printed it out. Print parts in the orientation provided - you will one to print two or three of the legs stl. I suggest you use supports on the…
Box for RLC meter designed by Nikita Afanasyev. It is made to fit the PCB designed by Aleksandar Krstic (pcb rev1.0) The link for the RLC meter (description of use, schematic, firmware, discussion):…
I couldn't find a model which would just use camera shape features to hold and stabilize it, so designed it myself. The model itself is mostly destined to be a base for your custom holder. Cover photo shows just that - added a slope with…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20…
Snap-on diffuser to spread the light so that it's one big light instead of multiple strong LEDs. Two versions where the “thin” version is half as thick over the LED area. In the image it's the regular version printed in transparent PETG.…
I present a mounting base for the Hot Wheels RLC Showcase, designed for the popular IKEA Skådis pegboard. The base is engineered to securely lock the Hot Wheels display case in place, significantly reducing the risk of the showcase…
A very basic model of this part from SparkFun: https://www.sparkfun.com/products/16398 Missing a lot of things on the real thing but it can get you quite far in prototyping case design as is Used in my Air Quality Monitor project (posting…
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
We used to just screw the Reolink to a board and put that board on top of a bookcase. We did have a Berker K1 socket close to the window the Reolink was looking out of. So I went and designed a holder that could replace the cover frame of…
We have Captcha's online—so why not offline? As robots take over the world, you might need help distinguish your human friend from your robot one with this irlCaptcha. The goal: arrange the pieces to allow a steel ball to run down the…
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
This is a simple mount to attach a Reolink RLC-810A to a 38mm or 50mm mount originally intended for a satellite dish. It requires the following hardware to assemble: 7x M4 heat set inserts (Ruthex or CNC kitchen) 4x M4x20 screws 3x M4x12…
We used to just screw the Reolink to a board and put that board on top of a bookcase. We did have a Berker K1 socket close to the window the Reolink was looking out of. So I went and designed a holder that could replace the cover frame of…
Reolink_RLC-510WA Wandhalter erlaubt die Montage an schmalen Balken. gedruckt mit ASA.
Privacy cover for the RLC-520A. Not sure if it also fits the RLC-520.
A stand for a Sparkfun 20x4 SerLCD There are two files, one with a mount for a Raspberry Pi Zero 2 and one without the mount. M2.5 standoffs needed to mount the LCD (and the Raspberry) as well as some rubber feet.
Enclosure for SparkFun 20x4 SerLCD Enclosure - https://www.sparkfun.com/products/16398 Super easy to print. No supports needed, rotate so the top piece is face down on the build plate. The case closes with a nice friction fit but I still…
I designed this adapter mount to make it simple to install the ReoLink outdoor POE security camera in the location of my older security cameras. The older cameras had a 108mm base, but the new ReoLink RLC-843A have a 128mm base mount.…
Since this model of camera has a zoom lens this cover extends only a little bit, so the cover wouldn't be visible. It also has a rib at the edge to prevent water from spilling over the lens. It is designed to be used with M4x16 bolts and…
This project was meant to replace the mount for the RLC-823S2 camera in the strait down, hanging configuration. Reolink's transformer mount is awesome, but didn't accommodate a severely angled eave. I found that when hanging from a sloped…
This adaptor allow you to attach the camera to a wall / cealing or even to a regular electrical box if needed. I didn't think I would need this until I received the camera and realized how weird the casing was made. Hope it help others :)…
A mount box to drop the the RLC camera below the house fascia board to avoid IR glare into the camera lens. You'll obviously need longer screws for mounting. Also made the walls thicker to reduce risk of vagrants breaking cameras from…
Einfaches auf Putz Gehäuse für die Reolink RLC 823S1 damit die Kabel an der Kamera verstaut sind. Die Kabelzuführung erfolgt über die bereits im Fuß der Kamera vorhanden Einführungsschlitze oder es wird ggf. ein loch in der Rückseite des…
EN: Cover to close the screw holes of the reolink RLC-810A DE: Abdeckung um die Schraubenlöcher der reolink RLC-810A zu verschließen Parameter: Material: TPU95 Layer: 0,2mm Infill: 100% Support: None
Power supply enclosure for Reolink RLC-510WA, wall mounted internally/camera wire fed through the wall. Camera is supposed to be mounted on the other side of the wall, thus no cabling is accessible. Internal plug holder is secured with a…
