8,688 models
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
This model's fully articulated at all joints, including along the spine. It sits comfortably on your hand and also likes resting on things. I've uploaded both the standard and NoMagnets.stl/obj files so you can choose to print either the…
Print approx. €6.07–€7.42 excl. taxPreliminary estimate for one variant
The green mat is 1 meter for scale. You can count frames to determine the speed it you like! The video is at 30 fps like all standard youtube videos. It covered the distance in about 1.2 frames, so it is going around 25 m/s, or 90 km/h. I…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…
Print approx. €4.35–€5.32 excl. taxPreliminary estimate for one variant
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Wallart or decoration of the mighty Spitfire. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files). Can be scaled up (original model is aprox. 1m long and 7mm thick -…
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for one variant
Printable tank model from our massive military sandbox Arma 3 . The tank turret can rotate freely. A licensed variant of the original Russian design operated by the elite of CSAT armored forces. The tank is equipped with a high velocity,…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
This is a real test of the accuracy of your printer. Most tests have a gap range of .15 mm (.0059") to .50 mm (.0197"). That's a wide range and it's targeted for a wide array of printers. With advancements in printer and slicer technology…
Print approx. €3.13–€3.83 excl. taxPreliminary estimate for one variant
🌊 🐠 Welcome Under the Sea! 🧜 🔱 You have the honor of visiting King Triton's Palace Under the Sea!! A majestic building of towering spires and impossible arches awaits your gilled friends. Dive in to learn about the features of this…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Armadillo
Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant
Two color design The base has interlocking cut outs for the rings, which are supposed to be printed in another color. If you only have one color, or you just want to print it as one piece, please use the one color model. One color design…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Weberowsky's Charmander from Pokemon
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €13.51–€16.51 excl. taxPreliminary estimate for one variant
Due to a lot of flooding, mosquitos seem to have thrived recently. To both take less space in your gear and make it more accessible, this clip allows you to mount your Thermacell mosquito repellent on a backpack, bag or belt! The design…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
Print approx. €15.42–€18.85 excl. taxPreliminary estimate for one variant
In only 9 minutes you can have a Keychain multitool, with 9 tools. Printed 0.2 layer 60% infill, im used Petg Carbon. -Supermarket Trolley 1€Coin -Big hex bit -Small hex bit -Screwdriver -3mm Tyre recommended change -30mm Ruler -Bottle…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
The Historical Chess Set Series #16 - German Bohemia Chess Set The German Bohemia chess set, which gained popularity in the 1950s, is known for its unique design. The chess set used in the 1970 Siegen Chess Olympiad was a later version of…
Print approx. €4.65–€5.68 excl. taxPreliminary estimate for one variant
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET
Dieser speziell entworfene Adapter ermöglicht es Ihnen, Ihr Smartphone im Hochformat (Vertikal) sicher im Bosch Smart Grip Smartphonehalter zu befestigen. Damit erweitern Sie die Funktionalität Ihres Bosch Smart Grips und können Ihr…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
I took Ts3D's excellent wall art model and filled the areas so it can be printed in 3 colors with simple layer filament changes. Included is a blank one for adding your own name. I used this font for the name:…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Easy to make a cute Mermaid keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…
Print approx. €8.76–€10.70 excl. taxPreliminary estimate for one variant
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
It is recommended to print it twice for better stability on the printer. This is a compact and well designed holder for your AnkerMake M5C Tool Kit. It is just the right way to store your tool kit with your new best friend (3D-printer).…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE SPIDERMAN KEYRING This 3D keychain is a unique and modern design that allows you to carry your keys safely and stylishly. With a minimalist and elegant design, this keychain is perfect…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Printed in Prusament PLA: Jet Black Lipstick Red (@ layer 0,5) Royal Blue (@ layer 0,9) Pristine White (@ layer 1,4) 0,1 IS Fast Detail 100% infill
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for one variant
This print is adjusted to the size of german yellow trash bags and to the cheap trash bags from Kaufland brand. -- Tolle Lösung, um Platz in den Schubladen zu sparen! Optimiert für Kaufland Müllbeutel und dem Standard-Gelbensack. Restmüll…
Print approx. €3.46–€4.22 excl. taxPreliminary estimate for PETGSource material: PET
The dispenser is printed with Prusa's clear PLA and an 0.6 mm Nozzle. I recommend supports and a layer-height of 0.30 mm
Print approx. €7.87–€9.62 excl. taxPreliminary estimate for one variant
Ein Gehäuse für den Hoermann HSE4 Handsender.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
Behold the Panzer IV G, the most common made German tank in WWII. Also now a printable miniature that you can proliferate into a grand army of your own! This version however, has updated detail, better tracks, and it's just a better model…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
While the original clip is designed to be quick-access and multi-purpose, this variant was made to fit more securely onto the straps of most backpacks. The integrated hook and slight ramp makes it a lot harder to accidentally bump off,…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET
This is an enderman figurine with adjustable arms, rotatable head, and stand with name. Print Instructions Layer Height: 0.2 mm (other layer heights should be fine) Filament: PLA (PolyLite PLA and PolyTerra PLA used in photos) Colors:…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
Carpenters knot also known as Zimmermannsknoten is a set of 6 interlocking parts originally designed by Japanese carpenters to securely fuse the intersecting wood structures when building rooftops. Building these knots is complex and has…
Print approx. €6.02–€7.36 excl. taxPreliminary estimate for one variant
Race number holder specially designed for S-Works Tarmac SL7. Requires 2x M4 Socket Flat Head Screws and 2x M4 nuts.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
The stock fan on the M5 is a 30mm (24v) fan. Mine died after just a few days I replaced it with a larger WINSINN 40mm (24v) ball bearing fan WINSIN 40mm 24v Fan - Amazon This is the same brand as the stock 30mm fan WINSIN 30mm 24v Fan -…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Did you install the Govee Permanent Outdoor lights only to discover that you're being blinded through your window? Well, here's the fix for that. This model can completely black out individual lights, or work as a diffuser. It all depends…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This compact version is for Letter size (ANSI Letter). Optimized for stacking, with flat top and total, constant height of 12.9 mm. It has both - provisions for straps and also hooks. The stacked configurations are of 2, 4, 6, 8, 10 and…
Print approx. €1.44–€1.77 excl. taxPreliminary estimate for one variant
Whilst great for emergencies, using the bit holder on the Leatherman® Tool can be a bit awkward so designed this compatible accessory to complement my Leatherman® Tool & Bit Set. I found most success printing handle first in PLA with…
Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant
Neues Gehäuse für einen Garagentoröffner von Hörmann HSE-868 Zur Montage benötigt Ihr noch zwei Schrauben M2x8mm mit Mutter und den Ring zur Befestigung
Print approx. €0.99–€1.22 excl. taxPreliminary estimate for one variant
I combined the two bit holders made by Leatherman into one single piece that fits behind the tool in the pouch. The bits slide in and out ok, but the tolerances are tight enough so they don't fall out too easily. Some might need a good…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
ING - Printed using PETG - Layer height 0.2 - Nozzle 0.4 - Use support - Number of perimeters 4 ITA - Stampato con PETG - Altezza strato 0,2 - Ugello 0,4 - Utilizza supporto - Numero perimetri 4
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This is a mounting bracket for attaching a camera to the bed of your AnkerMake M5C/M5. It has a space for the metal bracket for a Wyze Cam V3, but the head can be modified to fit other cameras. I used Tinkercad.com to modify this design,…
Print approx. €3.17–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
Výška Osieho hniezda - koláčika : 4 cm Priemer podstavy: 3 cm (presne na piškotu) Ak sa ti model páči klikni na srdiečko. Ďakujem. Height of the Axis nest - cup: 4 cm Base diameter: 3 cm (exactly for sponge cake) If you like the model,…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
AM4 thermal paste shield to help with thermal paste application on 1st - 5th gen Ryzen CPUs. Helps make sure that thermal paste doesn't fall on the MOBO. Takes about 13m8s with Bambu Labs printer, and about 40m on Creality CR-10 V2.…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
No supports required for printing. I'm providing three models here (2 just with the same original proportion, and one improve for better details). One includes the complete knot, while the other is a diagonal version that conserves…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
I designed this clamp to prevent the spool from falling to the ground during printing. It has only happened to me once, but to prevent it from happening again I have made this latch to put on the end of the spool support pin. Simple and…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Ghorlectopod Silk Spider. The Gorlectopods are a species of large, spider-like creatures native to the planet Ghorman. They are significant due to their unique biological capability of producing a highly prized silk known as Ghorman twill…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
This is a sign to tell unwanted visitors of your property, that you have active CCTV cameras running. The sign is in German telling “property video monitored”. This model is optimized for a 0.3mm layer height. This keeps your print time…
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
First 2024 design in my Bookmark Tanks Collection! For this design I tried to capture little more details in the model without losing simplicity. I hope you like it! Introducing Sherman M4A1! Sherman M4 bookmark for those thrilling war…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
These are card dividers for my insert/organizer for the board game The Lord of the Rings: Journeys in Middle-Earth. These dividers are in German.
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Mold for reinforced concrete bowtie, recommended to use PETG.
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
This fan shroud was created to redirect air into the radiator of vertically mounted GPUs in the Cooler Master NR200(P) case. Created to fit any 120mm fan. Baseplate can be shrinked for added clearance. Countersunk screw holes created to…
Print approx. €7.16–€8.75 excl. taxPreliminary estimate for one variant
This enclosure fits a (video) doorbell transformer that uses a DIN rail. Not always there is enough room left in a fuse box. This box/enclosure, has a 35mm DIN rail inside and has fits a double width DIN module. You can print it without…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
i was bored so i made an enderman for you guys!:)
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
This is a bit holder for hex screwdriver bits for the battery of the Metabo Powermaxx cordless screwdriver. It may also fit for other Metabo tools using the same batteries. There are two versions, one is for the 4 Ah battery, the other…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Two color spiderman in his element! Uses color change or MMU/XL
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Hasselblad 500 Medium Format Camera. my 500c is collecting dust … which is sad. This would be fun turned into a pinhole camera.
Print approx. €12.56–€15.35 excl. taxPreliminary estimate for one variant
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: 160mm X 160mm X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: FRANCE, GERMANY, POLAND, ITALY.
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
The side sections of a Leatherman are useful to hold additional tools such as saw blades, a pen or the bit extender but I always found they would fall out. So, I designed this simple holder with just enough clearance for the blades and…
Print approx. €0.80–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
This project was inspired by several models from Printables as well as Thingiverse. It was an exercise in learning Fusion 360 while also creating something functional for my godchildren. The construction uses some very specific hardware…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
This support is permanent and therefore always ready to receive the tray. Very convenient when you already have a busy hand. Printing: PLA, no support, 100% cooling, no special precautions. Place it 5cm from the front. Print Settings…
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for one variant
🧜♀🐠 Malá mořská víla – Ariel a Šupinka (The Little Mermaid – Ariel & Flounder) – Zápichy do dortů / Cake Toppers 🐠🧜♀ Tento 3D tisknutelný set obsahuje zápichy do dortů s ikonickými postavami Ariel a jejím věrným kamarádem Šupinkou z…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Bracket designed for my SUNLU FilaDryer S1 Plus Drybox. So that I can place it on my Ankermake MC5. Please note that placing this bracket is tight, but it all fits very well. You can move them once you have placed them. Top Bracket is…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Elna Supermatic bobbins have a groove on the inside of the cylinder which means normal bobbins don't fit on the top winder. The original metal bobbins are solid on the bottom and have 7 holes on the top side, which allow you to see the…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Leatherman ARC mod that adds the capability to carry original Victorinox toothpick (or tweezers) and pin. You can use the original torx screws that came with your ARC to secure the mod. The pin and toothpick can be bought separately on…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Requires: One 42mm diameter pine dowel(length to preference). Two 3D printed wall brackets. Two 3D printed pole endcaps. Six 10g 45mm, self-embedding timber screws. Installation: Brackets: Pre-drill timber screws through PLA slowly to…
Print approx. €10.32–€12.61 excl. taxPreliminary estimate for one variant
5 min design, replacement for broken one I Suggest use of PETG and infill 40%
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for PETGSource material: PET
Ein Satz Warnhinweise, um Unbefugte auf die Risiken unsachgemäßer Bedienung hinzuweisen, und Leitlinien für das angepasste Verhalten zu geben. Traditionell benutzt für Rechenmaschinen, hat sich aber auch bei anderen elektrischen…
Print approx. €3.92–€4.80 excl. taxPreliminary estimate for one variant
Bumper printed with CPE HG100 from fillamentum PrusaSlicer has a fillament preset but you can only see it with: “Original Prusa i3 MK3S & MK3S+ MMU2S Single” you need longer screws M3x30 M4x16 Zunge and Skidplate PETG Prusament
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Just turn the cutter to create the second eye. The height of the eye is approx. 10 cm The height of the smaller eye is approx. 7 cm
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
it's an enderman from the minecraft game in 2d for wall decorations
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
Updates 13.02.2023 V2 Release added minor changes to improve printing added front flaps to prevent leaflet from falling off Print Settings Printer used: Creality Ender 3 V2 Filament: PLA Nozzle: 0,4 Supports: No Resolution: 0,25 Print…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for one variant
A new series Dr Who Cyberman keyfob in two sizes, 70 mm x 72 mm x 2.5 mm and 52 mm x 54 mm x 2.5 mm I've included the .gcode from PrusaSlicer for the colour changes. Print instructions Category: Keychains Summary A new series Dr Who…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Needed to replace the blade on my multitool for working at my school.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
KSL 429032
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Wir präsentieren den Deo-Roller Halter, ein einfaches, dennoch funktionales 3D-Modell, das speziell für typisch deutsche Deo-Roller entworfen wurde. Es sorgt dafür, dass Ihr Deodorant aufrecht steht, Lecks verhindert und jederzeit leicht…
Print approx. €2.78–€3.39 excl. taxPreliminary estimate for one variant
This is a real, working rotor cipher machine — the mechanical principle behind the WWII Enigma, distilled into two printed parts you can hold in one hand. A classic Caesar cipher wheel has one fatal flaw: every A in your message encrypts…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Coin with a dharma wheel engraved in it. Uses art from PublicDomainVectors.org .
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I modeled the workbox in the actual dimensions, so it will probably need to be scaled down to fit your print bed.
Print approx. €17.24–€21.07 excl. taxPreliminary estimate for one variant
Cookie cutter for the logo of the "Jupfis" (a goblin or "Kobold") at the German scout association DPSG. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: PLA Blue
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Hi guys! This is a faceplate designed by me for our old first GameBoy DMG-01! For FDM printing, please use supports on the buildplate! UPDATE 30/04/2023: added the .gcode ready to print with supports! If you like, please press it :D
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
I couldn't find an alternative to the original geeetech i3 desk spool support and after going through a few design iterations I settled on this. Fast forward 4 years and it still fits snug on the upper cross arm of the i3 proB frame. The…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Mi è venuta l'idea per le mie piantine di viti. Si può utilizzare anche per i fiori in vaso per tenere lo stelo diritto. Stampato in pla per il rispetto dell'ambiente.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
If you are a fan of your Ankermake M5C like me, then this 2D Natural board is ideal for testing your printer in multiple color layers. I have already set the pause in the gcode. I have added 2 sizes so that you can choose the size you…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Printed in PETG 0,35 (fast), 4 perimeters anf 50% infill.
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
a simple but cool and useful card holder for desktop and school
Print approx. €18.53–€22.65 excl. taxPreliminary estimate for one variant
A clip-on cover to protect the lenses and LEDs of the UNI-T UTi260B thermal camera. Might also fit other UNI-T models with the same body shape. That's all there is to it. Simply clips on, I printed it in PETG to have a bit of flexibility…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
