Counting matching models…
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be…
UPDATE (Nov 2025): Based on user feedback, the tight tolerance cards and parts have been tweaked to add more clearance between parts for easier assembly. UPDATE: Trying to simplify a little bit, so the version of each file with slightly…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
https://www.buymeacoffee.com/maxt ---------------------- Update log January 2024: Version 2 of the base has been uploaded, see below for more info SIZE The model will fit on Prusa Mini+ (180x180). Feel free to size it up or down as you…
Remix of a design by J-Max from https://www.thingiverse.com/thing:1306832 These are corner square clamps in 30 variations used for woodworking to hold two pieces 90 degrees square during a glue-up or pocket-hole join. Regular clamps of…
Simple to print key holder that can fit in any household. You print the hexagon platform and any number of keychains you need. I personally used glue for sticking it on the wall, however strong double-sided tape should be more than enough…
Mobile phone stand in a modern curved design. The picture shows the stand with an iPhone 11 Pro Max. Also check out my curved iPad holder and other designs.
I decided to move away from Thingiverse and as a first upload to prusas printables I chose my modern geometric pattern planters. As a bonus for printables.com I added a version drain holes in the bottom of the big pots so that you don't…
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
These are corner brackets designed to suit System 2020 (2020/2040) extrusion. They can be used to build or strengthen/reinforce 3D printer frames and to assist in vibration isolation of vertical frame components such as the Z axis…
I wanted to print Hornet but none of the model that I found was like the idea that I have of Hornet in my head. So I made my own. You will need a drop of glue to attach the needle. I also made some modification to the Hollow Knight model…
This modernly designed tea organizer and tea dispenser keeps your favorite types of tea organized and safe. The standard dimensions are 210mm x 85mm x 170mm. The tea dispenser is designed for all common tea packs. About the print…
This is my design for a case for holding Gridfinity bins. My design goals included: Clean design No Hardware Able to stand on ends and back Contents stay in place Easy to open and securely close Stackable Designed for 3D printing While I…
Copyright Notice ⚠ WARNING This design is an original work by the creator and is protected under the Creative Commons 4.0 International License. Unauthorized reposting, claiming authorship, or distributing this model or its images—whether…
More tags you can find here: https://www.printables.com/model/1079716-christmas-tags-christmas-ornaments-20 https://www.printables.com/model/1080601-christmas-angels-christmas-tags-christmas-ornament
(2.0) Update: New versions to counteract the “benchy hull line” If you're not sure what I mean by “benchy hull line”, read this article. I have rounded out the bottom interior of the planter to counteract the slight layer shift our…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
This space saving hexagon pattern basket system should do the job! Just print and forget, remember to turn the speed down if needed. You can stack baskets on each other with or without the lid - They stack BOTH ways!
A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…
christmas ornaments three designs for christmas ornament spheres dimensions in mm: ~ 76mm diameter there will be some small overhangs in the top of the sphere, which don't really impact and are not visible as they are on the inside,…
Yarn bowl made to look like a ball of wool. Supports needed for the wool hole Category: Art Tools
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…
NEW 3 face corner bracket: https://www.printables.com/model/1390968-strong-corner-bracket Simple 55 × 55 × 15 mm corner bracket designed for M3 screws. Easily scalable for larger applications. Features: Pre-sized for M3 screws Compact and…
UPDATE 1.02.2024: Lids with Bambu-Logo handle for small and big AMS dryer pods The perfect-fit funnels for big and small silica buckets I think the silica boxes in AMS are simply brilliant, so the filaments can stay in AMS for a long time…
If you like these maybe you also like my Stringart Stars or the bigger Stringart Flower
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Mini compact shoe horn to clip on your shoes and protect them, easy to to print and slip in!
Easy-to-print flower pot with a simple and modern design. No supports needed. The planter can be resized according to your preferences, either enlarged or reduced as necessary. This design is easily printable.
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Support Me Support my work by subscribing to my Printable club to have access to the multicolored version of the Saturn V. 🚀 About the Model This is a faithful replica of the Saturn V, it's a static model: 100% of the parts are printed,…
Regal has partnered with Markiplier's Iron Lung movie, to provide fans the ability to print their own collectible popcorn container. Working with Iron Lung's creature creator, Molly Brown (@deadlymelodic), Regal's Prop Shop team created…
Modern funnel for pouring all kinds of liquids with an air channel. Base diameter 110 mm, height 125 mm. Easily scalable in slicer. Tested in sizes from 50% to 150%, with PLA, PETG, ABS and PA(nylon) filaments. Prints quickly and easily…
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…
A Two Piece Rotating Table to help with painting models. No bearings needed, prints without supports. (approx 4 to 5 hrs on a Ankermake M5C , 10% infill). (Appears to be sturdy enough) can be used as a display. Sizes : - Top Plate/Table…
Modern style fruit bowl with an optional insert! Takes a firm push to get the insert in. Don't worry, you won't break it🙂…However, it's hard to get out lol
It finally happened! The day every 3D printing enthusiast dreams about. My girlfriend walked into the room on Wednesday evening, showed me a picture of a lamp, and said “can you design and print something like this for me”. Little did she…
Build plate corner guides for the Elegoo Neptune 4 and 4 Pro printers. It accounts for the margins needed to give clearance to the underside of the heatbed You can stick it with double sided type, I used VHB. Printed in PETG for more…
Snap-in corner covers for Prusa CORE One printer. Depending on your door orientation, print one of either the “standard” or “swapped” covers. Use this for the corner with the door handle. Print three of the “original” covers and use these…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand…
iPad Halter in einem geschwungenen Design. Auf den Bildern ist der Halter mit einem 12.9 Zoll iPad Pro zu sehen. In der Mitte habe ich den Halter ausgenommen, damit mit dem Finger der Bildschirm nach oben gestreift werden kann. Der Halter…
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the fourth one I decided to put on printables, but there will be more in the near future. This pumpkin is designed to be used with leaf( for extra cuteness) but…
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Support needed for the muzzle! I used 2 wall loops and 15%…
Three piece lantern printable without support, the pieces snap together. Designed as a corded lamp, a candelabra base (E12) socket with metal clip snaps into the base, a standardized part which is readily available online. Multiple sizes,…
Simple bracket to hang the Elegoo Saturn 4 Ultra print plate to allow resin to drip off.
Nice little key tray. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full customization…
Hey, I would really appreciate if you download this, and better yet, like it!! I'm completely new to this, and really want some prusameters to get some more filament. Besides, who wouldn't want this work of art in their home? It's cute,…
Update: I have uploaded a revised version of this model that decreases the angle on the curve on the bottom of the planter to improve print quality on the overhang. This revision also improves the tolerances on the tray so the planter…
Nice rectangular key tray with curved lines and rounded corners. The ideal storage place for car keys, coins and other small items. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D…
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
5 different sizes M3 corner mount brackets. Customize to your liking using the STEP file. suggestions are also possible
Dont forget to post your makes! I use the following settings to print this model with a hole for hanging: Orientation: Top Brim: 5mm Mode: Vase Bottom layers: Enough to get two layers into the spiral, about 40 for 0.3mm or 60 for 0.2mm…
Iso 7010 - Warning Signs In my profiles there is 1 sign per printing plate, the printing plates are named accordingly. As the number of printing plates per profile is limited, the files are divided into several profiles. I have uploaded…
Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.
This is a stylish hex pattern design handle that is compatible with M3, M4 and M5 bolts, and comes in 6 designs for each. The M3 version of the handle has the perfect width for 1515 extrusion, while the M4 version is ideal for 2020…
Modern pen holder in a ribbed design. This time no round ribs, just flat ribs. Something different. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every…
This adorable seven piece set of dollhouse furniture is designed so that all pieces can be easily printed without supports , and then look sharp when used together. Included are several tables, chairs, and lamps which can be setup in…
GENERAL I found the the original size too small. I scaled up to 120 %. But then the middle ring was too big to print on my Prusa Mini. So I split the middle ring into 2 parts. Furthermore the base plate was redesigned to make assembly of…
Bullet journal template Bullet journaling is a customisable organisation system that combines a planner, diary, and to-do list in a single notebook to enhance productivity and track personal goals. I've created this template to speed up…
Gothic Lanternt design. Without any support in printing. Important to use with led lighting. Print instructions Unassociated tags: gothic lantern Category: Decor Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15
Here you have a really cute stylized unicorn. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! License & Usage Free to download…
Burry the tunnel under your aquarium soil or gravel and let your fish explore it. All the edges are rounded to protect you fishes' fins. With dimensions of 140mm x 140mm and a 37mm roof height, (50mm overall height, including the…
Print the windows with 0.2mm layer height and scale them down to 97% or 98 % on x and y. When you make them half the thicknes on z, use 0.1mm layer height. Scale the upper part up to 102-106% No supports needed
Celebrate the essence of Christmas with this beautifully stylized Holy Family sculpture. Featuring smooth, flowing shapes and a modern artistic design, it captures Mary, Joseph, and baby Jesus in a serene, graceful embrace beneath the…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Shoe horn design taught by Kevin Kennedy Except the side is cut flat and chamfered for no-support 3D printing. One reason to add yet another shoe horn is that the exist ones are either too short or need support or need post processing.…
By supporting my Patreon , I can continue offering free models. Get the 'Flexi Animal Keychain' Welcome Pack and the 'Flexi Dinosaur Keychain' Welcome Pack exclusively on my Patreon (Limited offer) There are two versions available: the…
Customizable Christmas Ornament - Name Ornament - Snowflake Ornament This is a customizer for Christmas ornaments which allows for any text in any font. There is a choice of six different snowflakes which can be placed in four set…
Christmas ornament or holiday fidget toy. There is a hole in the top to feed a string or ornament hook to hang from your tree just download the "snappable" version. In this version the two pieces snap together so it can hang from a…
This is a collection of simple to print 3D Christmas ornaments , including snowflakes, stars, bells, trees and many more. The set contains over 15 original designs created by me in Blender to ensure clean proportions, sharp details and…
Here is my take on a catch all / centerpiece / snack bowl! Use it for keys, snacks, TV remotes…morning cereal? I don't judge. Three versions available: 1 Compartment, 2 compartments, and 3 comparments. Check out my other designs too! Coda…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
Meet the ultimate “Highland Cow” : big horns, bigger fluff, and a fringe so long it’s practically a privacy policy. This chunky, seated Highland cow is sculpted with flowing fur, a boopable snoot, and soft, rounded hooves—perfect as…
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
A remix of a remix - a Unicorn PiggyBank. As is 18cm high, I printed this for my niece in Geeetech Silk rainbow PLA (together with another model to ensure sufficient color changes. Came out nice although the chin overhang IS challenging…
To support me the most, please download from MakerWorld Link: https://makerworld.com/en/models/170277#profileId-186972 Hate having to use a plyers to remove the bit? Well no longer. This remix has relief cuts on all the corners meaning…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
Print with PETG, without support, z=0,3 100% infill You can use nails or screws. Cable Clip SMALL for cable fi4,8mm, use nail 1,5x20mm Cable Clip Middle for cable fi6,5mm, use nail 2x25mm Cable Clip Large for cable fi10mm, use screew…
This is a 3D printable model of Hornet from Hollow Knight: Silksong . The character is shown sitting calmly on a rock, wearing her iconic red cloak and holding the needle weapon. Perfect as a collectible, display piece, or fan art…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
I decided to have some fun with the Soap Dish challenge, and design something that hit both the form and function while being incredibly easy to print - and I like how it turned out enough that I'm going to use this in my own home! I…
Hey makers. Today i bring you this model that i intend to use as a lamp, it's Hollow and you put a 5v LED lamp (or whatever you might have laying around) inside it. The original model had a lot of polygons and i simplified it a bit but it…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
A modern style catchall bowl. Enjoy!
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Update 28-05: Convert the big Horn into a Siren Whistle (loud!) - fast and easy print! Update 29-04: I have added the Pitch Changer for Portable Airhorn This little powerhouse knows how to produce a sound that will scare you. Very easy…
***UPDATE*** I've had a couple of suggestions come in (thank you @Roman_1037762!) that I'd like to implement over the next couple of days. The first of which is a clockwise flow for folks south of the Equator. Or maybe you just have a…
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
Strong corner mount brackets. Mounted using screws d=3mm :)
