Counting matching models…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
A model of a weathered antique wardrobe. Great for dollhouses, miniature scenes etc Should print upright fine without supports.
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
Tethered caps for sharp needle type multimeter probes. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.12mm Infill: 100% Filament: Any TPU Any Category: Electronics
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Phantom drone. Works with P4, P4A, P4P, P4P+, and possibly others in the Phantom series. There are 2 different clips, 1 for side facing and 1 for…
Test probe shield for the FNIRSI 2C53T DMM test leads. The probe it is very long and sharp, but if you are probing near other terminals, this cover will reduce the risk of shorting to something nearby. I used tree supports for the inside.
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
A useful sachet holder to add a touch of freshness to your wardrobe. I use it at work, and my clothes smell wonderful!! I fix it with a simple double sided tape.
Print on PETG tap the hole with a M5 Tap so you can use the go-pro screw
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
Part cooling duct for biqu h2 and biqu microprobe mount. Need 2x m3x3x3.5 heat set inserts for fixing the 5015 fan and 2x m3x3x3.5 heat set inserts for fixing the probe. Added v2 for less supports when printing. Apply some glue to…
Adapter for input shaper probe https://www.printables.com/model/422330-clip-on-rp2040-zero-adxl-345-input-shaper-probe
Designed to hold 12.5mm diameter probe on 6mm glass. Original printed from PLA, but i suggest using PETG or something else a bit more flexible than PLA.
I designed this calibration probe to use the leftover 4mm dowels and bushings from a StealthChanger build. It's also built around the hartk1213 sexbolt Z endstop PCB. It works similarly to the sexball probe that is commonly used for…
In addition to this great flower pot in Robert design, a corresponding bucket was also missing. So I enlarged the head to make it easier to use as a bucket. It looks best when you turn on “Fuzzy Skin”. Tree support Fuzzy skin →Contour 0,2mm
In addition to this great flower pot in Robert design, a corresponding bucket was also missing. So I enlarged the head to make it easier to use as a bucket. It looks best when you turn on “Fuzzy Skin”. Tree support Fuzzy skin →Contour 0,2mm
In addition to this great flower pot in Robert design, a corresponding trash can was also missing. So I enlarged the head to make it easier to use as a trash can. It looks best when you turn on “Fuzzy Skin”. Tree support Fuzzy skin…
This custom-designed probe holder is made specifically for my Rigol DHO804 oscilloscope. It should work with any DHO800 series scope and possibly DHO900 series (need to verify). It provides a secure and convenient storage solution for…
This is a holder for the two probes for the Rigol Desk Multimeter DM3058 and others. I printed it in white PETG and laying on the side with support (for the clips)
Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.
YouTube demo video: https://youtu.be/58Jl6n0qayw YouTube build video: https://youtu.be/NGpEOg99Y-0 A radio controlled version of the 'Prober' vehicle from the 'Jonny Quest' show. The episode is S1E18 called 'Pirates from Below'. It's a…
Intro A versatile and functional 3D-printed rod holder designed to help you build custom wardrobes, closets, or storage racks . This model serves as a sturdy mount for a closet rod or clothing rail — just print, assemble with two pieces…
The original one was a bit short. Remixed it to make it have a bit of extra wiggle room. Cover images taken on iPhone 14 Made in Fusion 360
I needed an easy way to store and pull the ZProbe for my XCarve. This is 2x4 size grid. It has filleted corners and finger pulls. I did this in PLA but PETG should be fine as well.
Based on printing material, you may need to increase or decrease the scale, this was designed for ABS which has a shrinkage of around 2-3%, less contractive materials may need to be printed at 99% or 98% scale.
Wall Cradle Bracket for Sonoff 02LD Temperature Sensor & Probe. I recently purchase the SONOFF SNZB-02LD IP65 Zigbee LCD Smart Thermometer (Probe Version). With the probe attached to the boiler flow pipe the temperatures can be monitored…
This is a digital 3D printable model of Ahsoka Tano's new white armor belt buckle from the Star Wars: Ahsoka series. The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut…
A simple jig. I was surprised to not find one here already.
edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…
Screw-on model (black) Dimensions: 12mm diameter, 7mm height It's designed for 4x20mm screws. I suggest printing it in TPU (with 100% infill or max walls) – this way you can tighten the screw a bit more, which will squish the printed part…
Ce conduit de refroidissement personnalisé améliore le flux d’air autour de la buse pour la Comgrow T500 équipée de l’extrudeur Biqu H2 V2S . 👉 Le support intègre un positionnement optimisé pour le probe de nivellement automatique (type…
Mount for the E3D PZ Probe PCB for use with Stealthburner with a Cartographer3D CNC carriage. It can also be used with a printed carriage that you can get from Gusk's model . This model has a shallower angle for the PCB than the original…
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
This is a modified version of the hook-on dragonburner cowl with screw holes on the side and a mounting piece, which allows operation of the Cartographer probe (or similar). It was designed for my toolchanger but should also work well as…
These are realistic models of ultrasound probes commonly used in the emergency department for bedside ultrasound. They’re an excellent way for students to become familiar with probe handling before using the real (and expensive)…
In my continuing quest to bring the most obscure props of Star Trek (original series,) I have done my best to recreate what the “Star Trek Technical Manual” (1975) identified as a Ray Gun. In the TV show, it's never used as a ray gun. In…
A box for the high voltage probe. The key feature is the cutaway at the bottom. These probes have cables coming out of both ends, which makes it not a good fit for a standard box. Updated design which has holsters for probes, oscilloscope…
This enclosure was built to house the ESP32 and sensor that measures humidity, temperature, pressure, among other things for use in HomeAssistant. You can print in PLA as it is used in room temperature indoor conditions. This is designed…
Replacement Door Pull for Brimnes Wardrobe doors. Double Bar style, open and closed ends. Print files with screw holes for the original wood screws or replacement 3mm hex head machine style screws. Holes 160mm apart. Print as pictured. No…
About the model: Cheaply hang a sturdy wardrobe rail! Just print two of these brackets and use the handy center hole to position them in the desired spot, add some screws and a broom handle (Suits 25 mm / ~1 Inch diameter) cut to the…
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. This model was…
You are loved and missed already. Thanks for everything you did for Philadelphia and the world. No sad bro. Category: Sculptures
Bracket designed to allow for mounting of 5015 fan and 8mm inductive probe to NF-Wind (or clone of thereof) extruder. Mounting height is optimised for use with TriangleLab CHC Pro. 5015 fan to be mounted via 3mm screws with heat-set…
I was wanting to have a good place to store my Amprobe AM-510 multimeter. None of the premade Rugged Box Parametric files fit. So this is my first attempt using Fusion360. Credit to another box comment for the pocket having no walls (top…
Overview Kataan Probe – Star Trek: The Next Generation This is a detailed, multi-part replica of the Kataan Probe from Star Trek: The Next Generation, inspired by one of the most emotionally powerful episodes in the entire franchise. The…
Hook for oval cabinet tube 30x15mm. Stays in position but can be moved with little effort. Print with fuzzy mode makes the model look even more high-quality (see picture). Haken für ovales Schrankrohr 30x15mm. Bleibt in Position, kann…
I designed it and Printed it for a friend in 100%PETG Its a simple Part for a Wardrobe Sliding Door Mechanism. Designed and Printed for a Friend, testfitted on actual Hardware. Hope it helps someone, Please leave a comment if it helped.
This is a print in place magnetic field probe. Use this to view 3d fields around magnets. A 50mm by 10mm by 11mm magnet fits inside the holder, although some might be loose. To make the probe work with weaker magnets, I found taping two…
This pen holder is inspired by the iconic papal robe, reimagined as a clean, stylized desk object with a playful yet respectful design. The model features the traditional white garment, buttoned front, shoulder cape, and a central cross…
Bourvil (André Robert Raimbourg) – Buste Description (FR) Ce buste représente Bourvil, de son vrai nom André Robert Raimbourg , figure emblématique du cinéma et de la chanson française du XXᵉ siècle. La sculpture s’inspire de la…
Built around an empty filament spool, MajorDomo is a small geodesic dome lamp that sits by the door and answers one very practical question: "How should I dress to go outside?” You can never tell just how warm or cold it is just by…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) THE SKELETON HEAD UNDER…
Mounting solution for a BTT Eddy probe on the Ender 3 S1 and similar Sprite extruder models. Only tested on Ender 3 S1 Suggest ABS or similar heat resistant material. Support will be required for the alignment guide. I printed my original…
This is a replacement hook for cheap, tube-built wardrobes. Inner diameter 16mm
A simple remix to match the thicker Forsand door, a great handle to start with so just a small adjustment. I mounted it with a thin double sided tape. The Forsand door is used together with the PAX wardrobes
The magnets are in slightly different positions in the DB zeroclick cowl compared to the ZeroClick probes magnet position. (This might be because of the ZC probe versions are not followed through on the DB github.) I was afraid it will…
Cover the unsightly hole left in the door when you don't mount all the provided hinges. The tall (236cm) ikea pax wardrobe ships with 4 hinges, but it's possible to fit more drawers if one of the center hinges are left out. Works fine but…
Test probe shield for the FNIRSI 2C53T DMM test leads. The probe it is very long and sharp, but if you are probing near other terminals, this cover will reduce the risk of shorting to something nearby. I used tree supports for the inside.
David Bowie (David Robert Jones) – Buste 🇫🇷 Description (Français) Ce buste représente David Bowie , né David Robert Jones , figure majeure de la musique et de la culture populaire du XXᵉ siècle. Le modèle est inspiré de la photographie…
brainrot from: https://en.namu.wiki/w/Italian%20Brainrot/등장%20캐릭터#s-2.30 Image used for generate 3d model added in picture gallery Background of image not removed, we was tested how new AI platform will perform with all backgrounds…
These parts attach to a RepRapMicron Axis Driver to turn it into a Z Axis with a print head. The print head allows deposition of UV resin in 10μm or finer droplets, or subtractive fabrication and manipulation with a stouter probe tip,…
A box for fluke accessories. It is wall mounted because it holds a lot of weight when fully loaded. Screw size is #8, which is what comes with wall anchors from home depot. One side holds two boxes of fuses. The other side holds two…
I have a second-hand IKEA wardrobe that's at least ten years old, maybe twenty. It wobbles. Instead of buying a new wardrobe, I made a few brackets and fixed the wobble. Parts Rod holders: to replace the missing Levelling shims: slide…
Also need a D = 5mm transparent pin for light transmission
I'm setting up a new cnc mill, and after organizing my machining drawer I needed a safe and secure way of storing my WP-500 touch probe, needing to use a 2x2 grid I had space to add in two ER16 nut holders (slightly different types, one…
Based on the famous LOVE sculpture by Robert Indiana. Model is quite small as uploaded, so resize to your hearts content.
Rotating Wardrobe Bag Carousel | $\phi 25$mm Rod Organizer Description Tired of bags and backpacks cluttering your wardrobe floor? This Rotating Bag Carousel is a heavy-duty, modular solution designed specifically for standard 25mm ($\phi…
Rotating Wardrobe Bag Carousel | $\phi 25$mm Rod Organizer Description Tired of bags and backpacks cluttering your wardrobe floor? This Rotating Bag Carousel is a heavy-duty, modular solution designed specifically for standard 25mm ($\phi…
A remix of the Klicky Probe mount for the Voron 2.4 to adapt it for use with the Duender Medusa HC by Sergei Irbis.
# Ergonomic Wardrobe Handle Replacement (130mm) ## 🛠 Summary Did a handle on your wardrobe or kitchen cabinet break? This is a sturdy, ergonomic, and modern replacement designed to last. Unlike many decorative handles, this model features…
Not sure of print profiles But its a pretty basic model. Even 0.28 nozzle should work. I printed at 0.2.
V3.0 is the latest version and more compact due to the 90 degree turn i did with the probe
Hi, My other better half decided to clean wardrobe and complained about mess with her belts and scarfs, so I decided to help her a little bit and designed simple hangers Easy, fast print - no support needed
This is an enclosure for the Flyleds.com Strobe Controller board (the current "blue" V4.0 board), which is included as part of the Flyleds "The Essentials" Position and Strobe Lighting Kit . This design was heavily inspired by one of the…
Variation of "dock mount variable part 2". The part is 5.5mm shorter.
This simple hanger fits on my closet doors and allows for hanging a hanger on the outside of the closet (in two different ways or for just hanging clothes directly on it. Very convenient. I made the design a couple of years ago and never…
Step into epic fantasy with this Arcane Swordsman Hero , a refined warrior miniature blending martial skill with subtle magical energy. Dressed in layered blue robes with flowing fabric elements, this character stands ready with a…
I recently built a Vzbot gantry on an Ender6. For the hotend I had a V6 style hotend and an Eddy BTT. I initially created a holder just for the BTT but then I realised that it would rattle when using the printer as normally the V6 Fan is…
Design for mounting the DSO-TC3 mini oscilloscope and probe on 2020 extrusion
Set up the following way (back to front): 1 mm insert for thin PCB (Nooelec UWB antenna) 6x square holes for cheap Ali/Amazon probes 2 mm insert for normal thickness PCB (1.54 mm): H-Tool SL-10 mini LogPer antenne 2x mount for VHF and UHF…
The purpose of these are to shield the driver and passengers from the strobelight aimed out from the car. The angle is different between the stl-files but are made for the same strobe light bar. Depending on what window and angle you wish…
This richly detailed wooden wardrobe sculpture showcases intricate carved panels framed by classical column-style supports and a bold architectural crown. Each section of the cabinet features unique relief carvings, including symbolic…
No more poking sharp probes into your hands, while searching in your tool bag! This part is a variable probe holder for your multi meter, that tidies up your multi meter and probe mess. Flexible Probe Holder for your Multi Meter Storing…
These probe holders are deisgned to hold oscilloscope probes in place for debugging and testing. Use with 1/4oz adhesive wheel weights to help keep them stable along with 9mm OD rubber bumpers. The source design files for SOLIDWORKS and…
I was looking to upgrade my Voron LDO Rev D Trident with an A4T toolhead, Xol carriage, and Beacon probe. I did not want to go sensorless for the X/Y as the switches have been reliable so far, but quickly discovered the new…
If you use your Z6 for commercial, or just want to put a flashing yellow light on your mower, then this mount is designed to attach to the top lid of the bagger via 2 small mounting holes. There is a 4" x ⅚" metal mending brace from…
replaces the stock screw on cone cap for the probe that fits newer 2.0Ghz seizure-less taps. prevents damage to the pin, reduces contact with water and dirt, and provides easier storage of, and access to, the probe. can mount to meter bag…
fits the smaller SA style AOI probe. keeps the probe from getting wet, dirty, and generally banged around. also helps with managing meter jumpers. mount the holder to your meter bag with a zip tie print with a few extra walls (3-4) and…
fits the KS plunge probe for older RF taps, 1.2Ghz and lower. Better than the old shotgun-shell style cap they come with. prevents damage to pin, reduces water and dirt. holder attaches to meter bag with a zip tie at 90degree…
