Counting matching models…
Super Mario Brothers I've added a thicker more rigid V2 model for free-standing use/display. If you're placing Mario & Luigi on a wall, you might want to use the V1 model to save some filament. Tip: The tab on the bottom is designed for…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
Original totem from the movie Brother Bear
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Print laying flat For best look use the filament change function in the slicer to make the logo dual color I changed the bridge angle in the advanced settings to 45°
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Super Smash Brothers Sans Character with Blaster in Crouch Position.
Print approx. €2.57–€3.15 excl. taxPreliminary estimate for one variant
Funny dinosaur brothers. Guys, don't print just yet! I found problems and will fix them. I will release a corrected version later. Thanks for understanding!
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Holds 4 Brother TZ style printer cartridges, used in a P-Touch printer, in a 2x2 Gridfinity space. They are held ‘vertically’ so that they take up minimal gridfinity squares on your baseplate. There are no magnet holes in the base as this…
Print approx. €3.62–€4.42 excl. taxPreliminary estimate for one variant
They're too much! It's the Miser Brothers from the 1974 stop motion Christmas Classic “ The Year Without a Santa Claus ” by Rankin/Bass Productions. These models are based on vector images provided by ClipartWarehouse on Etsy and use…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Check out this Scout woggle featuring Gray Brother, the wolf from the Jungle and Mowgli's best friend. Enjoy this cute wolf puppy caracter! It's the perfect choice for awarding to a Cub Scout named after a character from Rudyard Kipling's…
Height: 20 mm 6 bays for standing: 16.5 x 4 - 28.2 x 2 6 bays for laying: 16.5 x 4 - 28.2 x 2 5 bays for standing: 16.4 x 3, 22.4 x 1, 28,4 x 1 6 bays for laying: 16.4 x 3, 22.4 x 1, 28.4 x 2 Which tape size fits which bay: 16.4: 6 mm, 9…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Uses the Gridfinity storage solution to hold the Brother P-touch cube label printer. Allows the printer to print while still in the box (using battery as the power port is covered). A nice height to fit into the bottom drawers of an Ikea…
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Crankbrothers Multitool-Halter für MTB zur fixierung mit Kabelbinder am Rahmen. Hält auch ohne Sicherung!!
Print approx. €2.84–€3.47 excl. taxPreliminary estimate for PETGSource material: PET
The Rothana Destroyer was a battlecruiser made by Rothana Heavy Engineering For the Galactic Republic during the Clone Wars. It was 3km Long and was well armed. It had a reactor dome on the bottom to fit its large Hypermatter Inhalator…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
The orginal latch seems not to be very tough, it broke. My repacement part snaps right in place. It is a little more snug then the original, a satisfing upgrade if I may say so myselfe. The design is slighly altered in order to print…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for one variant
I needed this spare part for:…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Verrou pour sécuriser la fermeture de la boîte à gâteaux de marque Rotho, modèle Fresh. Le verrou coulisse selon l'axe circulaire de la boîte.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
This modular massage roller is designed for deep tissue maderotherapy and regeneration after a long day or workout. Each roller head can be swapped out for a different texture – from gentle to intense – depending on your needs. 🔄 ✅…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
There is a 30% discount on STL files and 15% on physical copies for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Battle Brother consists of 4 parts. 2 versions of files are…
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…
This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.
This is a model of Final Fantasy 7 Sephiroth in simple polygon form. This model has already been scaled to match my other prints. His hair part on the front is difficult to print, so there is a separate model that piece of hair in case it…
These extensions are to support the mats for the Brother ScanNCut DX range. I recommend printing at 0.2mm layer height with 6 walls (to eliminate the need for infill) and also print with a brim as they are quite narrow. It's a quick and…
Remix Brother Label Design. (thank you elumspe ) The information used referred to the contents of bambu studio. (Do not download the stl file. it used for upload post) for brother 12mm film. I haven't tested anything other than 12mm, but…
(Deutscher Text: Scroll 'runter...) -- UPDATE - 06. December 2025: I updated the model: made it a bit tighter and the clip has now a bit more grip. When I designed this over five years ago, I printed it on a TEVO Tarantula with way too…
Basic primitive hoop edited for embroidering socks on the brother skitch pp1 embroidery machine Hardware: 8x 10x2mm round magnets
Let me know if there any other video game characters you'd like to 3D print :)
🐺🔥 Carcharoth – Největší Vlk Morgotha | Fantasy Miniatura pro 3D Tisk Carcharoth, známý jako „Rudý Úsvit“ a „Hrozný Vlk Angbandu“, byl největším a nejstrašnějším vlkem, jaký kdy kráčel po zemi. Tento detailní 3D model zachycuje jeho…
Join the E-Nable association and offer a 3D printed hand to children! Rejoignez l'association E-Nable et offrez une main imprimée 3D aux enfants! https://e-nable.fr/…
Updated Textured PEI Plate & PEO cool plate with new QR Code for 12mm label Brother P-Touch printer. It is useful if you have Lidar, so it automatically detects the installed plate. You will need P-Touch Editor in order to open the lbx…
Source: https://www.models-resource.com/psp/dissidiafinalfantasy/model/18417/
Sliced into 14 parts for printing. Notches added for stability when glued together. Can be left as 3 parts for easier transportation (denoted by blade shaped notches and not the square ones). These should work as friction fit - I found…
I used support for the helmet and chest armor
Purpose This sock frame (or sock hoop) is an add-on for the 10x10cm frame for the Brother Skitch PP1, a cheap free arm embroidery machine, for printing on socks and similar items. It replaces the standard the magnetic cover and you will…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…
ohuf's design holds the P-Touch TZ Label tape very nicely, I just added Gridfinity'd it. 10 tapes fit perfectly in a 2x5 Gridfinity footprint.
zv ⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on…
Exiled out of Heaven and Hell, Zekroth is an apostate and out for blood and revenge against those who wronged him. The blindfold on his face serves a purpose, when he was exiled out of Heaven he was adorned with an irremovable blindfold…
Your futuristic war machines shouldn't be slogging through swamps and deserts to find their foes. Take it to the streets with the Smelly Old Gamer's line of buildings. My own original work designed to be compatible with BattleTech ("BT")…
Exiled out of Heaven and Hell, Zekroth is an apostate and out for blood and revenge against those who wronged him. The blindfold on his face serves a purpose, when he was exiled out of Heaven he was adorned with an irremovable blindfold…
Baskets are one-piece easy-to-print and lightweight to save print material. They are held in position by the rubber bumps under the printers. A slot in the front makes it easy to pick out printed labels. Holes in the base plate are round…
Here's my model of Malcolm's Gun From Firefly(Aka Moses Brothers Self-Defense Engine Frontier Model B). I scaled it up 300%(I had the model printed diagonally to fit the print bed). You might want to sand the connection points if they're…
Simple bin for brother TZe Tapes. 12mmx4 and 18mmx3 available so far. thank you to scheff for the step files! https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization Gridfinity by Zack Freedman:…
This is a recreation of the Deep Side bar for a Hoffman-style self-spacing frame for a Langstroth hive or similar. This is a design that has been around for a very long time, but there are some variations in how they are made from…
I really liked https://www.printables.com/model/302028-brother-p-touch-tze-label-tape-gridfinity-storage- by serialx for storing my TZE Tapes. I really liked that it fits any size tape. I just had two small issues with it. 1) I like…
Print at 0.1 mm layer height for smoothest results. There are 2 variants. I printed the 6-cart and 10-cart “standard” variants but couldn't get the “curvy” variant to print as well as I would have liked. Here (image below) I tried…
Another model rip from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
Supports that clip onto the back output of the brother Scan N Cut DX to support the mat
Pastille de blocage de machine à coudre Brother Sewing machine spool holder (Brand Brother) 25mm
Cap height parameter can be changed in the Fusion 360 model to create a custom component. PLA and PETG filament is probably the best material to use for printing. Use 3 perimeters and also 3 top and bottom layers with 20% infill. Print it…
A cool 3D photo frame that makes a great decoration or gift idea. Simply cut out the photo and insert it into the frame from behind. Then just insert the lid if needed and you're done. This is a fun gift with nice details, I love it, to…
Outline holder for Brother P-Touch PT-H110 label maker.
Needed a more universal frother stand, cut out in the base for paper towel or napkin if the cleaned frother drips. Printing on its back is the quickest w/o supports, but vertical gives more shear strength. Might make a second version…
My kids and I enjoy playing Stuffed Fables (and now also Oh, Brother expansion). I also enjoyed painting the minis. Problem is the game is a pain to setup & pack away, plus all the painted minis were getting knocked around in the awful…
I am currently testing a new hive concept (for me) called the AŽ (ah-zha) hive which is a Slovenian beehive design invented by Anton Žnideršič and named the Alberti-Žnideršič (AŽ) hive. Žnideršič named his hive after himself and a German…
Milk frother stand for the Bodum Schiuma milk forther. It was designed to allow easy and quick access to the milk frother while at the same time providing a sturdy and safe home for it while not in use. The print uses gradual overhangs so…
The gas bottle holder diameter is 74mm, because this is for my work van I needed it to be strong due to the movement of the vehicle so the infill was set to 40% (print time 31hrs) But this can easily be reduced if it were to be fitted to…
English: This 3D printable wall art is inspired by the iconic style of two suited men in shades and hats – a tribute to classic blues, soul, and vintage pop culture. Designed as a high-contrast silhouette, it’s ideal for laser engraving,…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cap height parameter can be changed in the Fusion 360 model to create a custom component. Use an 10mm long M6 round head screw to secure the bracket to the extrusion. A longer screw bottoms out in the extrusion and a shorter one is not…
I made this digital sculpt backn in 2018 when I was learning 3D. It is a daedroth from Elder Scrolls Online. It is actually a daedroth later on used in Beyond Skyrim Cyrodiil. I never got to print it, but I wanted to share it.
This free 3D model is based on Dorothy , the iconic weather research device from the 1996 film Twister . In the movie, storm chasers use Dorothy to deploy hundreds of small sensors into a tornado, hoping to study its inner workings and…
A removable basket to catch the labels from your Brother QL-700 to stop them from landing behind your desk! This is a three-piece design that uses the printer's own weight to hold the basket in place meaning that the basket can hang over…
These worms can be a little scary, but they are very cute! Brainy (with his brain visible) and his Siamese brothers are very nice! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and…
Mine broke. Without all paper lands on the floor. Models: DCP-T310 DCP-T510W DCP-T520W DCP-T525W DCP-T710W DCP-T720DW MFC-T810W MFC-T910DW MFC-T920DW KAS-T310
A stand and catch tray for the P700 label printer. Three sizes of the catch tray are available as STL (40/50/60/70/80 mm depth). The F360 file is also available in the files section to create other sizes or modify it further. I also made…
This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…
A modular holder for Brother label maker tapes (and various 3rd party tapes). It fits all standard tape widths - 6mm, 9mm, 12mm, 18mm, and 24mm. This is a remix of Nieuniknione's model (that is a remix of vinceformosa's model ) that adds…
I measured a bobbin included with Brother LS14S and made a print compatible version from scratch. If you want to use it with your other machine, this bobbin is 20.5 mm x 11.0 mm with 8.70 mm outer diameter shaft and 6.50 mm hole. You…
Dust cover for Brother KR 830 / KR 850 ribber extension - print left and right two times. Print them standing upright on their left/right outer edge with brim, no support needed. Your printer needs to be capable of printing at least 240mm…
I redesigned the Bee Barn XL frame concept by Jim at Vinofarm and optimized it for 3D printing on consumer-grade 3D printers like the Prusa MK3. The new frame design requires negligible "human time" to manufacture, very little time to…
Small stand for electric milk frother - Kleiner Ständer für kleine elektrische Milch-Aufschäumer
Stand for the Zulay milk frother - mounts using double-sided tape or adhesive.
Press to fit End Cap Fit Bosch-Rexroth extrusion 45x45 profile I print them solid, they fit sung
This is an assortment of Brother P-Touch TZE Tape Holder bins: Versions for 6-12mm, 18mm and 24mm tape Holds 6 tape rolls each (perfect for storing color assortments of the same size) Gridfinity compatible (Non-stackable to allow for…
Made this model a few years ago. Wanted to share with everyone here. The only thing to watch out for is the supports under Mario, flag, and flag pole. Be very careful removing it! or just leave it in place! Happy Printing!
This is a Gridfinity holder for the Brother P-Touch cube. I own the PTP710BT model, but this should fit any of their label makers with the same form factor. Since I had some extra space, I also included a small bin to collect the labels…
Eine herausnehmbare Schale zum auffangen der Ausdrucke für den Brother P-touch P700.
Langstroth-compatible beehive frame designed specifically for printing. Top and bottom boards are two pieces in order to achieve the necessary length on a mid-sized printer. Design uses 4 m3x20 bolts and some snug-fitting joinery. Glue is…
Oldest of the seven elder Forest Walkers, Niellgaroth the Wise is always ready to give counsel to the lost, weary and or simply befuddled folk of his realm. A watchful eye and a gentle nudge, should the need arise. Support free character…
I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…
UPDATE: Added cartridge stand for 4 cartridges. Stand for Brother P-Touch PT-P300BT printer and 12 mm TZe cartridges. Both stands has the Gridfinity pattern in at the bottom. A cartridge stand without the gridfinity pattern is also…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Sans Super Smash Brothers Key Cap
Part of Paper tray for Brother DCP-T420W and probably for Brother MFC-J480DW T525W T510W DCP-T510W T525 T560 T310W T420W MFC-J485DW J562DW J485 T310 J480
Organizer for 10 Brother P-Touch standard size TZ/TZe tapes
Used tinkercad and added mounting holes for the IKEA Skadis Board. Now I can hang my brother P-Touch E1110 Label Writer to the Skadis Board. It's not the best design- but it works! :) This is a remix of the Mr_Dan-File. -- GERMAN Habe die…
While watching Race to the Edge, I just loved this pendant Hiccup gave Astrid, both in what it represented and in design. So I made it in 3D. The only thing different to the one in the show is that I made the hole bigger so you can scale…
A bracket to hold the Brother E550W label printer (p-touch system) on an Ikea Skadis toolboard. Should be self-explanatory. Add two rubber domes at the back (bottom) for extra stability. Or edit the model to add a lip there.
Some more renders of the original TZe Tape holder by ohuf. Numbers from the comment by Fallon: cartridge's measures 16.25mm wide, 18mm measures 22.25mm & 24mm measures 28.50mm. I've added 1.5mm to these measurements to get the slot sizes.…
Supports are required for the flaps as they can break
Sculpted in Blender, made for a friend for a cosplay :)
The source marked this model as adult content.
Flat sided - to print on its side for layering strength. The number on the bottom of the original pull tab - P15BH2 I included a 5mm thick test part so you can check the fit before final printing. I'm not sure if there are more than one…
Bring some musical swagger to your rubber ducky collection with this Blues Brothers-inspired design. Featuring iconic sunglasses, fedoras, and sharp suits, these ducks are ready to hit the road on a mission from God! Printing Details:…
