Counting matching models…
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
Printed in PETG for slight flexibility needed around the locking ball hinge when assembling. Please read the comments of the parameters before changing them to prevent failures in the design. If you remix this design, please link it. I…
Update March 30, 2024 -- more sizes uploaded . On request, I've uploaded more pre-rendered 4x4 and 6x4 box model files. There are no changes to the source model or any of the existing model files. Enjoy! Description My Rugged Storage Box…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). Update: In the meantime I also created a version…
I really like the Gridfinity Case by Aiko since but the the model is extremely resource hungy - without any sacrifice in functionality or robustness I shaved down everything to yield about 33 % savings and added a list of other cool…
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
The box is parametric using gridfinity units. Added lids to ensure small parts are not mixed up in multi department boxes. Lids and Baseplate can be suppressed if needed. Parameters: Baseplate and Lids can be suppressed: Bodies to export:…
This is a remix of Chewey 's deburring tool case and Whity 's parametric rugged box. It has an insert construction in the style of PjotrStrog 's Multipart Pinecil case. Like the original, this case fits a 150mm length tool from tip of…
Printing & Assembly: Print the box in one piece (lid and bottom together). After printing, snap the latch into place. Sealing is optional.
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and the box itself) can be modified in Fusion 360 (f3d file available in the files section). There's also a version which has more shallow…
UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…
Revision – February 8, 2024 While creating my Gridfinity Rugged Storage Box , I've made some updates to this model. New features: New draw latch option New top opening grip and hinge end stop options Changes: The default required screw…
This is a Screwless, parametric, sealed, storage box. The Alround Box MINI: https://www.printables.com/de/model/851837-rugged-storage-box-mini-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
The case is based on my parameterizable " Rugged Box ". A GoPro 8 version is available here . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any order…
This rugged box is a remix of the ‘Tool box parametric’ by Yanev. UPDATE 2024_03_31 - I combined both the main box and lid into a single .f3d file so now only 1 set of parameters needs modified and all parts will adjust accordingly. This…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
Custom Rugged Box OpenSCAD What This rugged box is loosely based off “ https://www.printables.com/model/258431-rugged-box-parametric ” but completely written from scratch in OpenSCAD. So, it can be customized either in the OpenSCAD…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts and the box itself (number of rows/slots) can be modified in Fusion 360 (f3d file available in the files section). IMPORTANT: If you want to…
A supper strong option to keep your footwear off the ground! This shoe hanger is designed to fit most shoes including your flip-flops! Here's a cool cost-effective remix by @PRIma:…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
An update to my previous rugged box remix, designed to hold an assortment of empty 3ml vials. I've included a bunch of designs ready to be printed as well as the files necessary to customize the box a bit further in Fusion 360 if what is…
There are two versions of the box, one with a carrying ring and one without. All the printable parts files are already correctly orientated for convenient printing in STEP & STL & 3DM files. 1. EDC BOX BODY 2. EDC BOX LID 3. HINGE ( with…
I designed this to carry 15 18650 batteries. The battery divider is removable. It is a remix of https://www.thingiverse.com/thing:4757317. I re-designed the hinge and latch, made it thicker and to use M3 bolt. I used the latch from…
Small remix of the Parametric Rugged Box by TheSameNameTwice (https://www.printables.com/model/56071-parametric-rugged-box) This boxes are designed for 20 pieces of AA / AAA batteries. Thanks for the nice design of the box. Print Settings…
30mm Rugged Containers This set of Rugged Containers features a 30mm interior width with various internal heights. The heights range from 20 to 70mm. This allows a great size range for a variety of personal uses. These, along with my…
Ruggedized, latched, ammo boxes for your 9mm. Has provisions for a TPU gasket (not required) Need six M3x20 screws to assemble. Screws thread directly into the plastic. I taped the cardboard box to the inside of the lid as an cartridge…
The case is based on my parameterizable " Rugged Box ". Inner dimensions: 130 x 185 x 65 mm (Bottom height: 50 mm) Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a…
Rugged customizable box with free moving hinges and a firm latch. Scales well. No hardware required, just use filament through the hinges and latch. I put a small drop of CA glue on the ends of the hinge and latch filaments to prevent any…
Basically the same idea as the Gridbox by bilboDD but with holes for 6x2mm magnets. I also added some size variants to suit everyone's needs. The box is made for gridfinity boxes that are full height. Make them at half height and you can…
Remix of Rugged Box V1 from @ Whity + @ Yanev recreated with FreeCAD 0.21.1 for practice. Spreadsheet included in file. Feedback is welcome. Three model options: RuggedBoxCopyV15.FCStd = base model, no tray RuggedBoxCopyV15Tray B .FCStd =…
Rugged Box Ver.4 larger, square shape ,2 latches External Dimensions: width 86mm depth 86mm, height 40mm Joint tolerance is 0.2mm It is possible to scale about 20-25% higher so that the joints do not become too loose The latch is…
I really like the little 1x1 case by @ftobler and printed a bunch of them. However, I couldn't resist making a few of my own tweaks to the design. Easier Overhangs - The original model has pretty shallow overhangs on the corners that can…
Doubled the thickness of the base so that it can fit a second insert, and therefore all 7 tips
Box for store, lighters, filters, joints, pills or the stuff you need if is inside the size restrictions. 😅 To complete the assembly you need 4 screws M2 x 10mm and M2 x 20mm (Front and Back) maybe the screws can be replaced with…
Rugged Glasses Box The box is printed Print-in-place The locks are printed separately and click onto the top of the box. The dimensions of the box are in the picture, measure your glasses first. If it is small, scale all parts equally in…
This is a remake of https://www.printables.com/model/258431-rugged-box-parametric in FreeCAD. The example files are a Box with 100x30x50. Check out https://www.printables.com/model/708803-rugged-box-parameteric-freecad for a different…
Infill 30% (I chose gyroid) or more, 3 wall lines, no supports.
Version 2.0 of my small customizable rugged box done in openSCAD. Can also be used as openSCAD library. Improvements Better hinge: just pop in some filament as axis More flexible dimensions: length, height and width can now also be set as…
hello! This is a rugged box with an inserts to organize medicine vials like those used to hold compounded semaglutide, tirzepetide, retatrutide, peptides, K-beauty, TRT, Ozempic, Mounjaro, etc. It uses the Gridfinity system. It keeps your…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
Description This is a compact 3D-printed fidget keychain inspired by the Ruger Mark V aesthetic. It features simple moving parts, such as a sliding “bolt” and a functional trigger-like mechanism, making it a satisfying mechanical fidget…
English These couplings or connectors are used to join two corrugated pipe sections that are used in electrical installations. Model files are available for the common pipe sizes DN20, DN25 and DN32. I experimented a little and created…
Just a simple stackable Box. - one with a high opening for more volume - one with a low opening for a better acessibility when stacked If you want a version with a Labelholder, see:…
This box was design for telescopic rod (alias ... Steel Appearing Cane Pocket Magician Staff Magic Stage Trick Gimmick Wand Telescopic Rod Metal Staff Stage Prop Toy), which you can buy on aliexpress or anywhere else. Inner diameter is…
💼 Durable and practical storage case for SD cards and a card reader This rugged SD card case is designed to keep your memory cards organized and protected from dust and sand . It is ideal for travel, workshops, or everyday use where loose…
You can use some of the 1.75mm filament instead of screws to hold latches and hinges. If holes get printed somewhat tight, please use a 1.8mm drill bit or a 1.5mm hex wrench to make the holes fit. The cold white filament seems better for…
Unversal Parametrized Rugged Box I saw those boxes at yanew and Whity, but they are all constructed with Fusion360. Admittedly, I'm not that Fusion360 expert. So I rebuild such a box with OpenSCAD, so you don't have to have Fusion360 to…
This is arguably one of the best Desktop Organizers for everyone but especially for people who 3D Print. You can organize pens, pencils, USB-Sticks, SD-Cards, 90x90mm post-its. for a smaller Version, have a look at my small version of…
Inserts may be tight to install but I think thats preferable. Was able to press fit the smaller ones by hand but tapped the 5x5 and larger insert into place with a block and hammer. 5x5 and 10x5 have two inserts available, one solid and…
The case is based on my parameterized “ Rugged Box ” and holds Brother TZe label tape cartridges. I also made a stand/catch tray for the P-Touch P700 label printer . Support my work For non-Prusa parts and filaments, check out 3DJake (…
This is a “rugged box” style vial storage container. The hinge and latch use a snap fit and so do not require any screws during assembly. When attaching the top, hold it in the fullest open position and there is a small slot in hinge that…
Supports up to two SD memory cards Assembly You will need six M3x30 screws.
The case is based on my parameterized " Rugged Box ". A GoPro 9/10/11 version is available here . Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ). I'll get a small cut of any…
This is the 50mm (interior diameter) sized canister of the original Rugged Waterproof Container. I submerged the container in the photos for over an hour, and found it to be fully waterproof. - with the TPU gasket installed. I used Prusa…
I tried to generate all combinations i could fit on my Bambu. Let me know if you'd like a different one. I've only printed the 2x3 and the 4x5. Update July 2nd 2024: I've added files for the bins I use. They were generated with the…
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful. My kids need space on their desks and a cool idea was to store their laptops under the table plate. I have found several models on…
First off: Special thanks to Whity for his rugged solution - This is a remix of his great design. 2023.05.05 - Added the “wide” box, where the inside width was increased from 70mm to 100mm to accomodate those extra long USB sticks.…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
Meet Toolboxfinity — where Gridfinity meets garage toughness . These stackable, toolbox-style drawers lock together for unlimited height and unbeatable durability. With deep storage bins that stay put when you move or bump your setup,…
Printable pins replacing the screws allowing for a fully printable model without the need of fasteners. No modification of the box is required There are 3 different pins that are slightly different. 2 of each need to be printed, and…
Here ist my Box für Skipbo Cards based on “Rugged Box” by Whity. I used the inner box from “UNO Card Box” by Markus_p. You need the inner box 2 times. Use 6 M3x30mm cap screws to assemble the box.
Credit to original creator: https://www.thingiverse.com/thing:5148846 Printed at scale 150%, and added custom support for the chin.
A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…
Make sure when you slice it that you can see the hinges separated and not printed together. In OrcaSlicer you might have to right click and separate into parts with the STL. You might want an outer brim and support for the latches, but…
I really like the parametric Gridfinity Storage box by Pred, but I don't need the stackable design. And I even like the look of the rugged box by Whity more. So I combined both of them in a 4x5 Gridfinity box. The box holds 6U high bins…
The rugged box measures 110mm x 220mm x 75mm, providing a durable and practical storage solution. Designed with integrated slots for metric nuts, it ensures secure assembly and enhanced functionality. Its compact size and sturdy…
Happy Spring! With the weather so beautiful I decided to design something for the outdoors. This is my design of a Kicking Tee, an attempt to make a similar one to the Gilbert Rugby Kicking Tee. This works for Rugby Balls and Footballs…
Screw Top Lid Rugged Cylindrical Container Knurl Pattern. For the rest of the set go to: https://www.printables.com/model/641022-universal-rugged-knurling-pattern-cylindrical-cont…
After using the very nice TS100 box from @pjotrstrog I decided to make a few small improvements according to my own needs. The inserts will fit into the original box as I didn't want to reprint the main box. Here are the changes I've…
I needed a way to organise all of my metric bolts, nuts & brass inserts. So I made this case based off @whity's rugged box design & combined Zack Freedman's Gridfinity. This box has pre-made labels that can be printed if you have an MMU,…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is my 3rd Rendition in a series of locking carabiners I've designed. The…
I got requests from different brands for my .22lr TIKKA ammo box so I'm going to do a series of those and a couple more I've been thinking about doing. Just let me know if you have a favorite i missed. The spacing is 50pcs/25,4x6,14mm…
Just a simple stackable Box with Labelholders - one with a high opening for more volume - one with a low opening for a better acessibility when stacked This model is a variation of my more simple stackable boxes:…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED 7/11/24] “Fishie” the fish-themed shoe…
Description I created these 3 boxes to house my glasses and sunglasses when camping, hiking, biking, sleeping & car trips. As you can see, there are many uses, and I use them every day. There are also a lots of other uses besides holding…
Why the model? I've decided to create this model after I got annoyed by the ridiculously small size of every darts case I could find, they not only don't fit spare parts, but most of them don't even fit an assembled dart properly.…
Tough storage box for UNO game cards. A complete rework of https://www.thingiverse.com/thing:5217074 Initially, using raw filament as a hinge appeared to be a good solution. However, over time, the filament became brittle. Consequently, I…
Printing information: The hinge needs to be supported during the print, i recommend non-tree supports so that the whole length of the hinge is covered. Make sure your supports don't get between the hinge pin and rollers. To avoid this you…
For bigger usecases, use this: https://www.printables.com/de/model/819715-rugged-storage-box-parametric-screwless The box is assembeld with pieces of filament, so screws arn't needed anymore! If the filament falls out of the hinges, glue…
Small customizable rugged box done in openSCAD. Can also be used as openSCAD library. NEW NEW NEW: Version 2.0 out here: Have fun! Please like if you deem it useful! Tips welcome ;-)
This is a simple rugged hard case for the GoPro Hero 12 action camera. While design to fit a GoPro Hero 12, others have used this for their Hero 9 without issues. Might fit other models as well but I only have the Hero 12 to test.It is…
I created this box for my DREMEL accessory as a compact organizer that can be handy along. If you noticed the top and bottom, its because I have used a carbon fiber textured build plate, though you can use your preferred build plates…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
It holds 120+ standard-sized double-sleeved trading cards (i.e. Magic the Gathering or Pokemon) and includes dividers and an optional TPU seal. I seized the box based on Dragon Shield sleeves. No support or brimm required. Requires 6…
Original: https://www.thingiverse.com/thing:4757317
Samsung Galaxy S23 rugged phone case - to be printed with TPU, with 0.6mm nozzle.
The main difference between this box and so many others is more robust locks and hinges, that do not break so easily. Additional hardware: 3x M3x35 mm bolts (hinge, lock) Printing: Easy print, no supports, at least 3 perimeters. I prefer…
Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it flat.
This is a rugged Apple AirTag case. It is meant to be stowed inside gear or to be mounted with 3M VHB Mounting Stickers. It is designed to either use the included printed seal gasket, or to purchasable o-rings gaskets. 3D Printed Gasket…
Rugged Box Ver.3 longer rugged box with three latches External Dimensions: width 112mm depth 55mm, height 40mm Joint tolerance is 0.2mm It is possible to scale about 20-25% higher so that the joints do not become too loose The latch is…
How it works: https://vimeo.com/544208321 This is the 6 version of my speedloader. It has many new features: the cartridges does not fall out when the magazine is not inserted it is suitable for smaller printers there is the possibility…
A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…
Inside dimensions of the box without the radius: 53mm x 33mm x 30mm Just use a piece of filament to attach the hinge and latch. The filament needs to be about 2 mm longer on every side. Then use a lighter and make it warm and push it…
Remix of the famous “Rugged Box (Parametric)” by @Withy. I made the box a bit smaller to fit some bandaids I had at home and added a First Aid symbol on the lid. I put mine in the kitchen, in case someone cuts himself :) INSTRUCTIONS: You…
This spare parts/toolbox was designed to organize and store common spare parts for the Qidi Plus4 3D printer. There is also a removeable tool tray designed to hold all tools provided with the printer. You will need 6 M3 x 30 socket or…
The case is based on my parameterizable “ Rugged Box ” and is an alternative case for the one provided together with the “ Radius measuring tool ” by TooMuchFilament . Support my work For non-Prusa parts and filaments, check out 3DJake (…
