Counting matching models…
The Beelink Mini S12 perfectly fits in a server rack as a 1U device. I have designed a simple rack mount for 10" racks. Use the supplied screws that come with the Beelink mini PC (for the VESA adapter) to secure it to the baseplate, then…
This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…
This is my version of a vacuum adapter for Makita chop saws, to be able to connect the vacuum to the fixed part and not to the moving arm as with the original adapter. You also need a cover for the upper part, but this is already…
Remix of a remix. Fits the Beelink Mini S12 Pro. Have not tested with the non-pro model, but I imagine it works all the same. Friction fit so it is tight and doesn't move around once it's in place. Can use just the blank bracket mount to…
2 1/2" OD dust adapter for the side dust port of the Makita LS1219L 12" Miter Saw.
Side Brushes for the following robot vacuum models: Xiaomi Vacuum-Mop Robot - Series 2S, P, Pro, S20, S12, S10EU Part_1 PLA 0.2mm support: tree print in the position shown in the image Part_2 TPU 0.3mm support: tree print in the position…
Blocchi cuscinetti lineari SCS6UU - SCS8UU - SCS10UU - SCS12UU - SCS16UU - SCS20UU. Le misure dei modelli SCS_UU sono quelle più di uso comune, e si rferiscono alle misure dei modelli riportati in verde nel file SCS_UU_datasheet.pdf Le…
I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…
I created this remix so that I could connect both dust ports together into a single adapter which could connect to a 2" shop vac. Remove your old part, unscrew the hose from the blade guard and screw it into the new part. Also, insert the…
These Servo-frames are perfect for the KST X10 or similar Servos in same size. Best filament-choice is PET. 100% infill, print time for 2 frames is about 52 minutes.
Instead of spacer with longer screws - adapter that's not that much longer, but well optimized for better clearance.
Original Makita bypass is for easier connection to the vaccum hose of the LS1219 / LS1219L / LS1019 / LS 1019L by @Tobi Höher. https://www.printables.com/de/model/559368-makita-ls1219-ls1219l-ls1019-ls1019l-vacuum-adap This model is a…
Dust Reducer Adapter for Ryobi RTS12 Table Saw - from 4" Dust Hose to 2.5" (64mm) dust port. Prints with no supports needed. If you print with 0.3 layer height and 0.6 wall width, you can get a solid part with 2 outer walls right up…
A simple and strong wall holder for the spare Tineco brush that holds the brush at one angle. The model should be printed standing up (like the picture) with the help of a brim, no support is needed :) Print settings (suggestions) Print…
I needed a better solution for the dust colleciton on my Makita miter saw. First and foremost I wanted to move the connection point from the top, sliding portion of the saw down to the bottom and I also needed the ability to connect a…
Why another rack mount for the Beelink? TLDR: The others were just too flimsy for me. Modeling my own also gets me the features I want. The Beelink mini PC is ~40mm tall, which leaves only 4mm spare inside the thin 1U rack slot we all…
Miter inserts were all chewed up, so I designed new ones as close as I could to the original. Should be easily modifiable if you want to try 0 clearance insert. To connect the two pieces, I had played with the idea of a puzzlepiece-like…
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
Ich habe den Adapter für meine Makita DLS211 erstellt.
This lets the side vents work better to suck air from the bottom and vent out the top and back. Prints without supports.
The original model by Lookahead is simple and effective. Unforunately it doesn't work with the Milwaukee M18 BOS125 orbital sander. The pins are a pinch to wide, and they are space to far apart. On the Milwaukee the center distance is 66…
Cut out any shape in a variety of materials while having full control. The Multipurpose Cutting Tool is attached to the multi tool and replaces the union nut. Recommendation Print in PETG, nut on top. No supports. Everything gets better…
I couldn't find one to print and you can only buy the dustbin and lid from Aliexpress. Now you can print your own replacement lid. Use the original seal that came with the dust bin lid.
A small case for small SPDT switch SS12D00G3. No supports required, integrated sacrificial layer and built in clip.
I got one of these Beelink mini pcs to use for a plex server. It comes with an empty internal bay for a 2.5 inch hard drive, but there is extremely little clearance around it. The hard drive I wanted to add was apparently more rubenesque…
Zyxel GS1200-8 10 inch rack mount, remixed from the excellent model by Chillora. The remix introduces rounded corners and a centered slot to match the “rounded” rack look. Recommended to print in PETG for high thermal environments with…
holder for wall mounting
Sequre ES126 Electric Screwdriver holder for Zack Freedman's Gridfinity organization system. No magnet holes because I don't use them.
This is a case to hold the awesome ES121 electric screwdriver: https://www.banggood.com/Upgraded-MINI-ES121-Electric-Screwdriver-Smart-Repairtools-Built-in-STM32-Chip-OLED-with-Screwbits-p-1258406.html?p=2@3021069489201207MV The tool and…
Screwdriver and bits holder for Zack Freedman's Gridfinity organization system. Holds: Sequre ES126 Electric Screwdriver iFixit Screwdriver Standard 4mm bits that work with both
I tried my hand at designing a zero clearance insert for my miter saw. It took a lot of test prints and refining the model but eventually I got there. This model can print on a single plate and then slides together using the dovetails. I…
This is a replacement dust port for the Makita LS1219 Miter Saw (12"). The stock adapter is sized for a 1.5" (40mm) hose. And the way the stock port is configured, you cannot place the saw up against a wall without pinching the hose. This…
This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.
Replica throat plate for the Ryobi RTS12 table saw. Split into two parts for ease of printing, simply glue, epoxy, or otherwise fuse the two halves together. Use the original knob and screw for locking. For a wider opening, example for…
I recomend you to print version V2 it has fixed problems. I have wanted lens hood for my Panasonic Lumix GX880 with default lens H-FS12032. It is really hard to get them and they are not cheap, so I designed it and 3D printed it. If you…
A 10 inch rack mount for a Beelink mini pc and a jet KVM. I've oriented the 3MF and supported it where necessary to allow for IO.
I made a zero clearance insert for the Mikita LS1220 miter saw.
Die Box ist nicht von mir! Ich habe sie nur in der Größe verändert, und ein paar kleine Änderung vorgenommen. Damit ich meinen elektrischen Schraubendreher verstauen Kann!
There are already a few 10 inch rack mounts for Zyxel GS1200-8 (and GS1200-5), but this one has some unique features: As slim as possible, to squeeze it into small spots. The holes fit between the 0.625 inch and 0.500 inch sections…
I made a waterpump for my Aprilia RS125 Racebike. It has a groundplate for better flow and more stability. I printed it out of very well dried nylon. (Easynylon from Overture) printed slowly with a ,6 nozzle. I tested it on my racebike…
1U Rackmount for Zyxel XGS1250-12. Split design for small printers. BOM: 14x M2 heat-inserts 8x M2x25 (or longer) SHCS Screws 2x M2x16 (or longer) SHCS Screws 4x M2x10 (or M2x12) SHCS Screws You'll find a full assembly which shows how to…
This is a box for my ES120 electrical screwdriver, a normal screwdriver and many 4mm hex bits. It also contains 2 chambers to store some loose screws and other things in it. There are also 2 small lids which fits onto the chambers. When…
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
This is a ES126 grip and cam lever for pressing the button. Partially remixed from https://www.thingiverse.com/thing:2805221. The grip is molded on a Wera 2mm hex driver and is extra comfy in the hand. I had to recreate all of the files…
This is a mount for the Zyxel GS1200-5HPv2 network switch so it can be mounted in a 10 inch rack. The mount is 1U high, and the switch mounts flush with the front. The total depth when mounted in the rack is no more than then depth of the…
Preparation: The Case reuses the Bar Magnets that come in the Bit Storage Case requiring for them to be retrieved first ( most likely cleaning by removing any glue and case material still sticking to them ). The Cavities account for…
I successfully implemented this on my Ender 3. The system is comprised of the top wobble-x bracket, the left and right hangers, the middle wobble-x bracket (biscuit), the bottom bracket, and the z-axis motor mount. I use dual z-axis lead…
From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
Sequre ES126 Screwdriver Holder modified for Multiboard
This is the high-performance, high-noise version of my desk fan — designed around the Arctic S12038-8K , an 120 mm industrial fan running at up to 8,000 RPM . Compared to the Noctua-based versions, this thing is in a completely different…
we recently bought the Tineco cordless vacuum clear and it came with so much additional accessories, that there was not enough space to put all of the onto the included wall mount. so i created the holder to screw it to our workbench…
I had combined LegendaryCheez's two parts into one to be printed on larger printers (Creality K2). This also fits Makita LS1013 as well. Print solid (infill 100%) for best results.
SQ-ES126 Electric Screwdriver and Bit Holder for Honeycomb Storage Wall. Fits all 24 bits for the driver, and the screwdriver all in one neat solution. Hole is 19mm wide to allow the SQ-ES126 to fit in easily, but still sit snug. Printed…
First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…
Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…
Replacement weather-proof deck plate storage container for FS10 and FS12 kayaks. (May fit others; see dimensions on drawing.) The tapered edge prevents the need for supports. I used a modifier to print the top ring at higher infill than…
A holder to mount a ZyXEL switch onto a Skadis board. To mount the holder to the peg board, use these T-nuts .
So this is a side view of my Aprilia RS125 racebike. The backwheel spokes are in the backwards direction, because my racebike has a honda wheel in backwards :)
Making a few mods for my ES121 so i needed a 3D model to work from. Buy here: https://bit.ly/378e7dX Category: Tools
A stand and holder for 1x ES121 driver and 15 bits Print instructions Category: Tool Holders & Boxes Summary A stand and holder for 1x ES121 driver and 15 bits
I am having some issues with my printers at the moment but I don't want to delay the release of this, my latest overly complicated wiimote & nunchuck holder. (It's not really complicated, compared to my Socom 16, it's a breeze). Once I…
Mount Zyxel GS1200-5HP v2 in 19inch Rack
I wanted something to stabilize my anchor wizard which I installed on a mighty mount recessed into one of the perch pads. This straddles the might mount and perch pad, making contact with both, as well as the kayak on either side of the…
I really liked the original ESRack system design created by @EvilProphet . I created a module for Zyxel Switch GS1200-8 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
Diesen Öltankdeckel habe ich entworfen, da der originale bei mir nach der Zeit etwas zu locker sitzt und immer abfällt. Es ist eine simple Konstruktion und sitzt etwas enger als der originale, sodass er nicht so leicht verloren geht. Der…
Fits ESRack mounts and other accessories used Elegoo PLA
A generic 10 inch 1U Rackmount for the Zyxel GS1200-8 i bought for my Lab Rax. Locks the switch in place without requiring screws, allowing it to be mounted in virtually any orientation. Upside-down, hanging in a rack or standard vertical…
Passend für Aprilia AF1 Futura/SportPro sowie Aprilia RS125 Federgabeln. Der Schutz ist Konstruiert um die Federgabel für den Service in den Schraubstock zu spannen ohne sie zu verformen oder zu beschädigen. Es passt perfekt auf die Gabel…
800φ4 shaft prone to snapping off if you're not careful but still strong enough to use, might want to strengthen it with a paper clip melted into the plastic (i haven't tried this yet). Print with the hex side on the printer bed (think…
These are good for either upgrading a non-detatchable cable controller, or flush mounting the data port on the detachable cable controllers. Designed to be used with these heat set inserts
This is a mount to attach AC Infinity 120x38mm fan on a standard 4" duct hose (and for venting to the outside through a window). Tested with followings. AC Infinity Fan AXIAL HS1238A AC Infinity 4" duct hose. AC Infinity Fan Speed…
Just add it on top of the other, no screws or glue needed. I printed it on Polylite PETG.
Sim Rig - Pedal face plate - Najam Simtec S120 If you're like me and racing with socks. This pedal face plates give you the all the grip you need, some might call them the "sock eater" ;) Features: Nice grip on your pedals. Mounts to all…
SQ-ES126 and Wiha Go Box MicroBits Stand A stand for a Sequre ES126 electric screwdriver and the Wiha Go Box MicroBits Set. Description I have one of the ES126 small electric screwdrivers from Sequre. This model has more torque than the…
A simple 1x2 module to hold your ES126 upright along with all its bits. Credits Gridfinity by Zack Freedman Grizzie17 's outstanding Gridfinity Refined gridfinity base Le0Michine 's great fusion360 gridfinity generator
If you like this model and use it please upload a like, it really helps others find it! I hated having my scope on my desk and the cables getting in my way, especially when not in use, and I already had a “portable” touch screen mounted…
The adapter for connecting the Gude EXS125.1 sander to a vacuum will elevate your eccentric sander to a whole new level. It fits onto the hose designed for a Kärcher with a diameter of 35mm. Printed with support.
Thanks to @Vaarlion_340250 for the Original Model.
If you order a Dell PRO Slim plus with an optical drive, it comes with a drive cage to mount a 3.5" hdd. But no screws. The screws on the website appear to be $4AUD each Here are 4 solutions that can use existing hdd screws you have lying…
Mount for soldering station TS12-X. I suggest to print it using TPU or other flex-based material.
Version of the ruggedized case for ES15 (insert only, reusing the rest of the original version) - but resized for the Sequre ES126, including an extra compartment for a bit magnetizer. Plenty of clearance is included for a lever to…
Replaces the throat plate of a Ridgid MS1250 miter saw. Add a long rectangular modifier to increase infill to 100% in the middle 15mm where the blade goes through. Install and make a slow cut. May have to take it out and sand a little…
Holder for the Sequre ES-126 smart Screwdriver, with all its bits and the manual screwdriver. It can be mounted on a pegboard with 25.4mm spacing, and has a hole so you can charge the screwdriver at the same time. Mine was printed out of…
With the vacuum comes a wallmount for the vacuum itself, but where shall you put the addinitional things? Just print this wallmount and voilá. Best printed with 3 walls or more and a good amount of strong infill to make it stable.
I really liked the original model by Majarspeed but wanted to print the grip out of TPU. The open-sided design wasn't a good match for TPU as it didn't stay on the screwdriver body, so I modified it to be a full sleeve. If you don't want…
Holder for 10 4mm Bits for the great ES120 Electronic Screwdriver. Best printed in TPU or other flexible material.
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
A simple holder for the ES121 electric screwdriver and 48 bits Print Settings Printer: Heavily modded Craftbot Rafts: Doesn't Matter Supports: No Resolution: 0.25mm Infill: 15% Notes: Easy print, use any plastic and choose any quality you…
Support pour ne pas gêner la sortie d'air de la Livebox dans ma baie de brassage. Support so as not to obstruct the air outlet of the Livebox
Simple little adapter to hold an ES120/ES121 electric screwdriver on an Ikea Skadis board. Prints completely without supports, and attaches using the Skadis T-Nut system . For assembly, you will need a M2.5 nut and bolt. I used a M2.5x12…
This is a 3d model of the Airbox lid from a Zundapp KS125 Moped.
drillholder 12V AEG and Rigid eg. BBS12 BS12 no support needed
Es handelt sich um eine Nachbildung des klassischen Gummipuffers als 3D-Modell. Material: Zwingend TPU verwenden (kein PLA/PETG!).
I scoured all the major model sites for bit holder for my beloved Bosch PS21 Driver. I printed out a bunch, but many were not the same drill model, or required magnets to be glued during the printer or after. The original model that this…
This S6 molecule was extracted from the crystal structure of rhombic, orthorhombic and monoclinic sulphur. The models exactly reproduce the geometry of the real molecules. I recommend to paint the models, as I did in the photo.
This is a charging stand and bit holder for an ES121 screwdriver: http://www.miniware.com.cn/product/es121-motion-control-screwdriver-steel-soldering-pen The right angle USB cable was one I had lurking in a drawer but I've no idea where I…
1:1 Nachbau der originalen Einfädeltaste
![[PFBS12C5] Multipurpose Cutting Attachment](https://media.printables.com/media/prints/379699/images/3187351_1eea2725-70a0-4eaf-ac27-8977cf674cdf/pfbs12c5-multipurpose-cutting-attachment_p2.jpg)
![[UPDATED] Camera Hood for Panasonic Lumix micro 4/3 default lens H-FS12032](https://media.printables.com/media/prints/43365/images/431083_7c6d97a4-327e-417d-b5ff-e75166a1d827/large_display_camerahood12-32_g2_v2_43365.png)
