Counting matching models…
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
Here is the file for my Vault of Asgard Its a Zero Support Model that makes a Beautiful form that can be used for storage or even a lamp, I have included an Inverted version if you would like the Pattern the other way up . I hope you…
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
Thor-approved variants of soozafone's Pencil Polearms: print as-is, without supports. Uses the same topper piece as the original (included). The socket and layer orientation might cause the fit to be a little tighter than the “open”…
If you have a 23+ KTM, Gas Gas or Husqvarna you know removing the new radiator cap is nearly impossible! Works on all 23+ KTM/GasGas/Husqvarna Austrian bikes. Print in PETG, TPU, ASA 100% infill with backing
The Bilskirnir, also known as an Asgard mothership or Thor's chariot was Supreme Commander Thor's flagship before the O'Neill class was conceived. I've modelled it from reference photos, schematics and all possible material I could find,…
I use the brake line guide on my 2018 KTM EXC F450 which is equipped with a navigation tower for rallye racing. It will fit on all bikes with a similar fork. The updated version is short and got an offset in order to get more clearance…
Oil drain tube for KTM Husqvarna Gasgas The thread is M12 x 1.5. Compatibility: All KTM from 2009 All Husqvarna from 2014 All GasGas from 2021 Print in TPU or PETG Instructions: Lay the bike on its side with the drain bolt facing up, the…
Das ist der Nachfolger (v2) meiner Radiuslehre 01-14mm. Das Problem dass keine 90 Grad Ecken gemessen werden konnten, wurde hier behoben. Die Daten sind für den Druck mit einer .4mm Düse und einer Schichthöhe von .2mm optimiert.
GasGas brand keychain, with a simple and easy design for a quick impression and low material cost.
Split up specific stls for printing with different colors in case you have an MMU or equivalent. White bits Black bits Grey bits Blue engine bit In my case, I only had white filament in PETG while my black/grey/blue is PLA and they don't…
Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…
Here are the files for my Vault of Asgard - MMU Version Its a Zero Support Model that makes a Beautiful form that can be used for storage or even a lamp. The Print was tested by the great @FilamentFrenzy, who also supplied the photo,…
Just a simple logo you can print and attach.
Amended inner 01 to 06 to allow measuring tioght corners, added split pin to hold everything together
This is a fork seal driving tool for use with 43mm diameter dirt bike forks. This was designed with WP dual chamber forks in mind, but will service numerous other fork types from KTM/Husky/GasGas. There are two lips designed into the seal…
GasGas logo keychain, with a simple and easy design for a quick impression and low material cost.
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
The Destroyer was created, by the command of Odin , as a weapon to use against the mighty Celestials. The task was taken on by the finest craftsmen of Asgard, and once finished Odin, Zeus , and all other leading Earth gods transferred a…
This is a simple print which can be glued on top of the “Vault of Asgard” by Bugman_140.
In the case of a crash the lower triple clamp hits the steering stop screw causing marks, scratches and sometimes breaks the triple clamp. One of the detailed pictures shows some damages caused by the regular steering stop screw. I…
This is a basic tool used to adjust the Compression on a WP6500 cartridge fork. It is very handy since most bikes you would need to remove your handlebars in order to adjust with a flathead screwdriver. This is a flathead tip on a disc.…
Ein Inlay für alle Teile des Grundspiels und der Erweiterungen Wanderer und Druiden. Passend für die deutsche Version von Lookout Spiele (ev. auch für andere Versionen). Das Drucken funktioniert ohne Stützen. Anleitung für das Drucken des…
I used Tinkercad to add three magnet wells on the bottom of the puddle jumper and add extra support for the front magnet. Now as a fridge magnet, notes can be affixed to your fridge or message board.
GasGas EC 300 2002 Kennzeichen Halter weg klappbar für sumo/Enduro Abstandhülse am besten aus TPU Rücklicht: https://amzn.eu/d/bGidhtm Rest aus PLA/PETG
Created using an image-to-3D tool and minor manual adjustments: I used https://makerworld.com/cs/makerlab as a image-to-3D tool for this Photo used for generating:…
Easy to print, no support or MMU needed.
Description Pedestrian Traffic Light Quick and easy to build - Snap fit - no screws needed Final dimension assembled: 4x4x15cm (LxWxH) Print No support Orientation as in the files Infill 15% Material: PLA Parts needed 1x WS2812 / Neopixel…
Hour Meter mount for KTM, Husqvarna, GasGas, Sherco Replaces the speedometer. Original made for my Sherco SE should also fit for KTM and others. I print with PETG and 100% infill for max. stability. Lasts now more than 30 hours.
I printed this tool with 50% fill and it worked great.
Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm This handy tool is perfect for hobbyists and modelers. With the Thicknessgauge, you can easily measure the thickness of materials or objects, or use it as a template to better…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
I saw a model of this finger gesture online and reconstructed it. It's a decorative object for all rock enthusiasts, metal fans and hobbyists
Handy Halterung mit Ausgang für Ladekabel. Knickt das Kabel beim Laden nicht ab.
Bring the thunder god's legendary power to your workspace with this stunning 3D printable Thor figurine showcasing his iconic Asgardian armor in magnificent detail. This heroic statue captures every intricate element of Thor's majestic…
Pro spodní detaily bude dobré klidné tisknout 0,2 tryskou :-) For the lower details, it will be good to print with a 0.2 nozzle :-)
Das Loch führ das Kabel hat einen Durchmesser von 10mm The diameter for the cable is 10mm Die Datei ist ohne Name ;) The file is with out the name;)
Anquietas character keyboard for casual typing below is a picture with all characters (71). Klávesnice se znaky Anquietas pro běžné psaní níže je obrázek se všemi znaky (71).
Includes raised lettering that can be printed in a different color. In my case I printed the main sign in brown and the letters in gold/yellow. Also has a picture hanger slot in the back.
would print out of tpu preferably with gyroid infill to get homogenous squish the normal variant was a bit los inside the motorcycle frame so I increased the outer diameter to 20,2 instead of 20
Figura de cara moái con marcas de desgaste por el paso de los años. Impulsado por MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d )
Blasgates für DN50 und DN90 Rohre und Schläuche Die "Anschluss" Dateien müssen 2x gedruckt werden. Zum Zusammenbau werden benötigt: DN50 Version: 4x M5 x 25mm Schrauben (ohne Montageplatte: M5 x 20mm) DN90 Version: 4x M5 x 30mm Schrauben…
remixed the model to fit BOSGAME B100 Mini PC
Finding myself unable to get a new sealing from the dealership in time, I made my own sealing for the clutch actuation cylinder. Printed with TPU filament. My aim was a temporary solution to get the bike running, but it works perfectly…
Sur la photo c'est le guide oficiel gasgas avec des douilles en aluminium à l'intérieur. Sur le mien je n'en ai pas mis, donc un peu différent.
This is an all-in-one adjustment tool for the Rockford Fosgate and any other amplifier that uses a 3mm key to adjust set screws. I added a hole in the back for a 3mm Allenkey. I Cut the shank of my 3mm Allenkey and heated it with a torch…
Fonty přikládám abyste si mohli udělat vlastní jmenovku :-) I'm attaching fonts so you can make your own name tag :-) https://fontsgeek.com/stargate_1-font https://fontsgeek.com/stargate-sg1-go-ald-font https://fontsgeek.com/stargate-font…
Der Hebel meiner Nähmaschine ist gebrochen, daher habe ich einen Ersatz erstellt
Consente di sganciare facilmente il fermo del tubo PTFE di una stampante 3D come la Creality K1C. Basta premere sull'anello per sganciare il tubo.
Description/Background: This is an insert for the Schiit Asgard 3 headphone amplifier that securely holds two panel mount RCA jacks. The Asgard 3 can be purchased with a DAC input card that connects to an internal header on the mainboard,…
GasGas koozie whre one side is with full logo, other side with G only. i test printed with 0,6mm nozzle as I had it istalled at the moment, so works also with that.
Print the funnel like in the picture, the overhang prints perfectly without supports. I printed with a 0.4 mm nozzle at 0.25 mm layer height, but changed the thread layer height to 0.1 mm with the adaptive layer height feature in Orca…
Show off your support for qmansgarage with a keychain of my modified Coleman BT200X!
Hello. I made an inner cap for a GlasGarten type shrimp food box. It helps keep the food drier. It doesn't let the powder-based food flow into the inside of the cap. The measuring spoon can be stored between the outer and inner caps. No…
Organizer für die deutsche Erstversion von Fürsten von Catan (später "Catan: Das Duell") Der Organizer passt nur in die alte Version des Spiels, die neue Version hat ein neues Kartonformat. Es hat zusätzlich Platz für die erste…
This is a mount for a BOSGAME N4020 Mini Computer (https://www.amazon.com/dp/B0DG8P4DGV)
This is a radiusgauge for the common used grinding radii for a scraping carbide insert. The 1 inch square in the center helps to check sraping quality.
Application / Background My mothers scarifier (lawn refresher) went useless, when the main handle broke off. It was pretty clear that gluing the broken part was not sensible, it would likely break off right again. So I opened the switcher…
Guide chaine origine pour VTT Gasgas pour les modèle MXC et ECC .
Cover to protect the map during washing
Petit guide à inserer sur le robnet essence d'une gasGas Txt pour reconnaitre les emplacements fremé (C) et réserve (R).
Case for the Sparnäs Receiver/Gateway board that was designed by Anders Helin. The lid clicks in place by friction / layer-lines binding. I printed mine in PLA, with 0,6mm nozzle and 0,3mm layer height for fast print speed and it works…
Spacer for Rockford Fosgate RV/marine radio. Step file provided so you can adjust thickness as needed for your mounting location. This allowed me to install the radio in a very shallow wall but still looks clean. Printed in black PLA with…
This is a router template/jig designed specifically for the Rockford Fosgate PPS4-6 Punch Pro 6.5" speaker . If you're installing these speakers and need a perfectly cut opening for mounting, this jig makes the process fast and accurate.…
For a modified Bosgame B100 mini pc. I removed the mkey wifi/bluetooth card and added an mkey 2.5G NIC. The backplate provides a spot for the RJ45 connector to slide in without being too bulky or hard to connect/disconnect. I left it as a…
This is the gommet is you lose some for the gasgas ecc bike print in TPU
Ich habe das Teil kopfüber, leicht schräg und mit Support gedruckt. Hierfür habe ich ASA Filament verwendet.
Bonjour, merci de mettre un like, si ce design vous est utile. ce filtre s'adapte sur un 300EC de 2003, avec boucle arrière de 2011, je pense qu'il doit s'adapter sur de nombreuses années. j'ai réalisé ce filtre a air, car celui d'origine…
Bonjour, merci de mettre un like si ce design vous est utile. Imprimer avec FILAFLEX 82A, remplissage à 100%. Bonne journée et bon ride.
Eine einfache Box für die Soundausgabe via Klinkenbuchse. Eine Weiterentwicklung von meinem ersten Modell , das wegen der Bauteilprobleme mit dem ESP32 Mini nie so richtig funktionierte. Alles wietere dazu steht in meinem Blog .…
I am SG fan so i created this model for other fans :) i hope you will like it.
Rockford doesn't have this in their online cad so I modeled the one I have on hand using calipers and an angle gauge so it's accurate. I needed a model so that I could make a shroud for it for a mount. I made it in fusion so if you need…
This is my Maker Chip the front has my minecraft skin, and the back has my qr code.
Made for Rieju mr 300 2024 model
The Bosgame M5 Mini PC does not come with factory VESA mounting holes, restricting it to sitting flat on a desk. This custom, two-piece mounting system solves this issue entirely, letting you mount your Mini PC securely to a wall, inc. a…
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Standriser for KTM, Husqvarna, Gasgas EXC, TE, EC TBI Bikes with the newer angled frame on the bottom skid plate from 2024 and upward. With this riser the front wheel is lifted off the ground like on the tpi and carbed models. Print with…
This is the embleme of Freiburg im Breisgau/St. georgs cross its made in a way that you can even just cange the color on specific layers to get the right image.
der Mosfet-Einsatz ist von Higany “danke dafür perfekt passend” @higany_97013 https://www.printables.com/model/355368-holder-for-xy-mos-d4184-power-mosfet-breakout-modu
Weissgauff induction stove leg. Can be printed using PLA.
Token para representar el jugador inicial en una partida de Marvel champions para aquellos personajes con el rasgo Asgard.
Needed to replace my Sony 6.5" Marine speakers (XSMP1611) and decided to replace them with Rockford Fosgate M0-65 6.5" Marine speakers... however I found the cutout in the bulkhead on the Sony was just 5.0" whereas the RF needs 5.38"…
This is a two piece speaker grill design specifically for the Rockford Fosgate R165X3. I included four different designs for the grill and they can be thicker if needed to strengthen the mesh. I printed mine in PETG so it work survive car…
For installing the remote bass knob from Rockford Fosgate (only tested for PLC-1) to your car with double sided tape (2cm) Print with (tree) supports as is. German: Zum Einbauen des Remote-Bassreglers von Rockford Fosgate im Auto mit…
Some valve caps for vehicles, I made these with 0,2mm nozzle. This far: tesla, f150, bmw, toyota, yamaha, gasgas, will add more later.
Handy Halterung mit Ausgang für Ladekabel. Knickt das Kabel beim Laden nicht ab.
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Rockford doesn't have this in their online cad so I modeled the one I have on hand using calipers and an angle gauge so it's accurate. I needed a model so that I could make a shroud for it for a mount. I made it in fusion so if you need…
GasGas brand keychain, with a simple and easy design for a quick impression and low material cost.
GasGas logo keychain, with a simple and easy design for a quick impression and low material cost.
GasGas EC 300 2002 Kennzeichen Halter weg klappbar für sumo/Enduro Abstandhülse am besten aus TPU Rücklicht: https://amzn.eu/d/bGidhtm Rest aus PLA/PETG
Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm This handy tool is perfect for hobbyists and modelers. With the Thicknessgauge, you can easily measure the thickness of materials or objects, or use it as a template to better…
A 3D-model of the Stormbreaker axe / hammer from the Marvel universe in the concept version with an Asgardian handle it includes both a full model as well as a version split up into 10 parts that easily fit into regular 3d printers and…
I wanted to show-off my RAKwireless RAK7391 WisGate Connect. So I created this enclosure that allows to show the internals of the gateway. There are several enclosure options in the print files, please select for yourself which one you…
Simple adapter to mount the battery dispenser to a HSW type system. 3 HSW pegs for strength and holds the battery dispenser by all four mount holes. Recommend printing at 45 degrees to reduce chance of shearing. Printed with 4 walls and…
Bring the epic world of Basgiath War College to your home! This bundle features high-quality, detailed STL files of the most iconic dragons from the "Fourth Wing" and "Iron Flame" series. Designed with fans and collectors in mind, these…
