Counting matching models…
A set of covers for a straight-through XT60 connection (mainly so I can avoid shrink tubing). Has 2 separate 4mm diameter wire holes. The fit is a bit loose but suits my requirements. I printed on a raft - without one, you may need to cut…
Remix of XT60 Plug Housings resized to fit TX30. I printed it in TPU and the fit was really snug, non-flex materials might need ~1% upscalling.
I've made these air compressor filter housings to replace the cheap original ones with one that flows more air and makes less noise.I've found out that the cheap ones have lots of flow obstructions and could be improved on significantly.…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Fork of project site: Open-Espresso/gaggiuino-builders: A Gaggia Classic control project using microcontrollers. (github.com) Discuss: Gaggiuino Builders | Facebook You can buy these printed here at www.matter-replicator.com For use with…
Collapsible housings for the xt60, as well as a housing for the PD trigger integrated with the xt60. Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max **Rafts:** No Supports: No **Resolution:** 0.2 mm Infill: 100%…
These are two housing designs (long and short) for OBD II connectors. Requires no support material to print. The long housing has room for an OBD2 connector on one side, and a USB Type B Female connector on the other. The short housing is…
Print settings are up to you, there are no special settings needed. They are designed to not require supports if you print with the long part of the body facing up. Print on a textured bed as that surface will be the front of the VF. Each…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Print with the flattest side down.
Recommended Print settings PETG as its a toy for kids 0.2 MM Layer Height 0.4 MM Nozzle 10-15% Infill 2-4 Skin Edge Support Layers 20-50% Fan speed (or what ever your default PETG fan speed is) Default Adaptive layer height. No brim…
Share the joy of christmas ornament. This is a small, easy print with some sweet details. It can be printed as it is, without any supports or special settings. The angel is around 5cm (2 inches) tall. It can stand or a thread can be…
I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings…
Grip plug for you MP5/MP5K Navy Grip. Either blank or with locking peice holder. Requires $5 grip plug spring from HK Parts: https://hkparts.net/product/grip-cap-replacement-spring-p16408.htm/
Biggest model fills MK3 print plate, number of casings (first number) and spacing between them (second number) are in the filename. Be careful when handling, the nubs can be easily removed (layer adhesion is crucial), but during normal…
A collection of custom Shimano Di2 satellite shifter button housings
Replacement over under lamp and side by side lamp conversion for the short hood of the Aristo-Craft RS-3 . New 5mm holes will need to be drilled in the new LED locations when converting to side by side. NOTE: I PUT MUCH TIME AND EFFORT…
These are resin-printable housings for magnetic pogo pin connectors. Included are high current two pin barrel connectors and two designs for 6 pin connectors. I may add a low current 2 pin connector in the future. I doubt that any of…
Plant Sings - A simple helper for marking your plants Don't know your flower bed? Well, we have wonderful signs here just for you. Already today you will not forget what you put where. And you can immediately choose from many types of…
This is a compilation of Jason Cantarella 's ropelength minimising knots, arranged into a single file for the thin versions of the knots, and a single file for the thick versions. These are all of the prime knots with at most 7 crossings.…
When your out camping (or POTA or SOTA) and you want to substantially increase the distance of your VHF radio - a J-Pole or Slim Jim is an easy way to do it. This antenna is made from a 54" length of 300 ohm twin lead wire. I'm not going…
I made this for my daughters Miranda Sings cosplay. Since Frozen Toes ice cream bars aren't always easy to come by and melt very quickly I deiced to 3d print one for her. You'll want to sand the print or otherwise fill in the build lines,…
In PACG, you can have up to 6 players, and the start of each turn involves flipping over the Blessings deck, which works as a turn counter. The game manual recommends each player flip the deck with the card facing toward them, so that it…
Like many SW20 MR2 owners, as I stripped my car down for restoration, the fog lamp screws were seized in place. Removing the lights meant a couple of the mounting tabs on the lights where damaged. Rather than attempting to repair the…
Added 3mm nut inprint to parts xt60-f-1 and xt60-m-1
Problem The X and Y stepper mounts on the CR-10 tend to flex when under higher load and using enough belt tension to be able to use higher acceleration values. I initially tried to use a stiffer mount plate, but that did not solve the…
The Wufu wind chime is an attempt to approach traditional symbolic Eastern motifs in a modern way, combining clean geometric forms with meaningful cultural elements in order to create an object that conveys harmony, longevity and good…
This is bearing holders for a mouse bucket trap. I know over KILL but why not. Most people make these with a 5 gal bucket and add water to drown the mice that fall in. If you do that and leave it too long they get nasty and smell. So I…
After basic street plates for the bus system already uploaded here: https://www.printables.com/model/1608362-diy-streetplates-for-tomix-running-bus-system-n-sc I found that turns are needed and the possibility to run different ways… so I…
I bought some of the relays below and created some housings to get them on a 35mm rail. I drilled out the holes for LEDs to 2 mm and glued in a clear piece of PETG as lightpipe. The timer relay can be set as single timer. In this case…
Nice little spot to keep wireless SingStar mics. Empty chasm on the bottom to dump some heavy stuff in to give it some weight - I used a tube of JB Weld and some steel BBs.
I quickly whipped up some spent shell casings for the Ork Lootaz I'm working on. Category: Games
This is a casing for the Kingston DataTraveler Micro 3.1 I find the USB stick a bit to small to handle with ease, so i designed this casing to make it easier to use. I would recommend printing the case upright so the USB fits (cause of…
Just a coloured remix of PiZero Vertical Screwless Camera Housings by gowen with PRUSA logo for MMU. Print instructions Category: Camera
The indicator lamp housings were crumbling apart on my Pioneer SX-838. I was unable to remove the old bulbs and replace them without destroying them. These are exact replacements. You'll need to install the new bulb from the front (fish…
The Estes fin alignment guide is a tool that I use quite often here in the AAEN Fabrication Shop. It comes with three cardboard motor casings. They are 13mm, 18mm and 24mm in diameter. Due to the cardboard casing I have run into issues…
Rings you can use to pony up your corded Singstar microphones. Just unscrew the top of the microphone and swap out the original red or blue rings with one of these rings. The cutiemarks currently featured in these files are: Pinkie and…
100x160mm sign, with art of a steaming hot pie, and text “Count Blessings not Calories” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit…
Support to hang belts o IKEA dressing doors
Remix of PiZero Vertical Screwless Camera Housings by gowen with cutouts for GPIO. I used a pi zero model to cut the minimum amount of area required to make gpio accessible, at least as much as possible. The only suggestion would be to…
A prototype of a sorting drum for 9 mm casings. 150 mm in diameter, 200 mm in height, 2 mm thick walls. As requested by a Reddit user. Work in progress!
You can print the part in any material you want. I suggest you print it in PLA or PETG (The one shown in the photo is printed from PETG). No assembly or supports are needed. Use a standard slicer profile and make the elephant foot to be…
Hi I created these signs for Attica's slider from Thingiverse (https://www.thingiverse.com/thing:4646300) in German and English. If you have any ideas, please let me know and I'll try to implement them. Hi Diese Schilder habe ich für den…
I had written a longer description but my video driver crashed. These WILL NOT FIT THE KSC75s This is a complete driver replacement for the Koss Porta Pros. Fits 55mm Drivers like the Peerless by Tymphany. Driver Grille is inspired by a…
i am a jung Creator feel free to chang the size i made it for holding sings
Made this fun display with a led light inside, easy interchangeable name plates. Fun sign with easy to change nameplates, made a blanc to add whatever u want, made a Fallout 76 and NASA version for fun, can also be used without lights and…
Print with abs, asa or anything that has even greater heat resistance. I would recommend printing with 5 walls and tree supports. I lost my original one and made this from memory and by measuring where it fits, its not perfect but its…
This is a housing set used to create a 6 inch (150mm) rotary slow speed grinder for faceting, flattening, or sharpening Very Hard materials. The motor used for the project is a 24v DC geared motor that is setup to run ~200RPM from a cheap…
100x160mm sign, with art of a steaming hot pie, and text “Count Blessings not Calories” Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit…
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 Support my work: https://ko-fi.com/modsmthng Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness…
Build a professional alternative back panel for Raspberry Pi 5/4 housings with the official 7" Touch Display 2. Here we offer you the STL files for a 3D-printed alternative back panel, which has been specifically developed as an addon to…
i am a jung Creator feel free to chang the size i made it for holding sings
All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 This is a remix of the version for the LilyGo 1.75 Amoled real pictures. The basic housing fits very well (Var0 and 1). The individual…
Resized water filter wrench for 10 inch tall water filter housings with 6 points of contact. local hardware stores did not have one. my thanks to jdireen for posting his model
This is a IronMaxx Dosingscoop Holder. I used this glue tape: https://www.amazon.de/gp/product/B098XGZ1H4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Tape w: 15mm h: 0,8mm Print Option: PLA or PETG Supports needed (use support…
A charming Easter statue featuring a joyful bunny standing tall, symbolizing luck, renewal, and festive cheer. Perfect for decorating your home or gifting during the Easter season! 🐰🥚🌸 🖨 Print Settings: Recommended Layer Height: 0.2mm for…
Pen holder for 5 pens with 20% infill. Made of two main parts – easy to snap together and equipped with separate, removable casings. The casings come in different diameters: 8 mm, 9 mm, 10 mm, 11 mm.
Extensively remixed version of the BTT SKR 1.4 Turbo Enclosure for CR-10S Standalone Mod" by mmoraes80, that I have created for use on my own design. I have deleted the aviation connectors, revised the cooling slots, added a 50mm fan and…
Build a professional alternative back panel for Raspberry Pi 5/4 housings with the official 7" Touch Display 2. Here we offer you the STL files for a 3D-printed alternative back panel, which has been specifically developed as an addon to…
This adapter allows you to mount the vertical oriented 7" enclosures for the Nerdiy.de Touch Display 2 on a wall. The adapter plate is simply screwed onto a cavity wall box or the wall itself. This adapter plate is designed for vertically…
This adapter allows you to mount the horizontal oriented 7" enclosures for the Nerdiy.de Touch Display 2 on a wall. The adapter plate is simply screwed onto a cavity wall box or the wall itself. This adapter plate is designed for…
It reads: "One more trespasser & my windchime is complete" . If you have actual spent .303 brass casings, then you may want to use those instead of the 3D printed ones. Thanks go out to Cartridge_Man | Printables.com for his original…
These were remixed from another model, but I don't know where it came from. Includes a removable TPU “grommet” for focusing the camera lens. Cases have slots for ventilation, so the camera doesn't overheat.
Made these holders to mount inside a suitcase or on a wall. Really tight fit.
Casings that hold figures in place while traveling Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15mm Filament: Prusament PLA Galaxy Black If you using wet PLA and you…
Printed in PLA and VASE MODE. I think any layer height will work.
