29,563 models
This Silica Box is for the AMS Hydra Mod , but it also works perfectly with the standard AMS. It fits perfectly and the volume is larger than in other versions. There are also versions that support a Hygrometer. This is the Hygrometer I…
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Print approx. €1.15–€1.41 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Or just print this out and share your make. I appreciate your support! If you are looking for the pyramid, I moved all those models to their own page. You can find it here.…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
This is a percussion frog or a guiro I designed. I based the design off of a wooden one my grandpa has. The only part of the model that needs support is the mouth, the rest of it including the roof of the inside can support itself. Since…
Print approx. €8.59–€10.50 excl. taxPreliminary estimate for one variant
Because of the feedback some of you had, I made this final versions witch is better in pinching tape. As always, if you have any suggestions, just let me know !!
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant
Calibration cube to test 3D printers. This is old version of my All-in-One Calibration Cube. If you want do download never one, click this link witch redirects you to new version or just find it on my profile among uploaded models.…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
It's a two-metre version of my low-poly world map, and the biggest printing project I've done so far. It took me a couple of months and about 5kg of filament to print (including some failed prints). It is quite easy to print. Just print…
💕 Valentine Heart-Love is in the air! 💕 Imagine a heart made of two parts that twist elegantly into a spiral – yes, you simply twist it together! This creates a magical vortex effect , making the heart an unforgettable design. Perfect for…
Print approx. €1.74–€2.13 excl. taxPreliminary estimate for one variant
A zip tie cable clip for insertion into 2020 aluminium extrusion. There are quite a few options in around but none quite like what I wanted. Printed with PETG since they require some force to insert (so that they sit solidly in the…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This Model was 3Dscanned from a traditionally made wooden percussion frog. The higher the infill density the better the Sound! You can separate the Frog and Drum in PrusaSlicer if you'd like the Frog only :)
Print approx. €5.54–€6.78 excl. taxPreliminary estimate for one variant
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Print-In-Place with no additional hardware required, making it's easily scalable up or down . All of the credit for this design should go to the original designer: https://www.printables.com/model/565344-automatic-rope-tensioner I've just…
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
It's a one-metre version of my low-poly world map ( bigger version (the real images show the two-metre version)) It is quite easy to print. Just print each individual files. Use the last picture, which shows how the parts come together,…
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
It works like the one in the Illusionist movie (no camera trick needed). The perfect romantic Maker gift. You can use it as a necklace or keychain, it fits 4 little pictures inside. This is one of the coolest things I have ever designed,…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Two versions for Countersunk screws 3 mm or 4 mm Enjoy printing! I am open to your suggestions and feedback and look forward to seeing your 3D creations.
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
A reusable holiday gift box printed in PLA. Prints in two pieces, the base and the lid. Change the color for the lid ribbon with a pause and filament swap (built into the gcode file here). No supports needed. The pictured box was printed…
Print approx. €9.33–€11.41 excl. taxPreliminary estimate for one variant
This is my Travel Soap Box. This has been tried and tested on many of my travels by both myself and my son. The pictures are of my actual well travelled Soap Box, over 2 years old now. The box holds a full normal size bar of soap, the…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Print approx. €27.16–€33.20 excl. taxPreliminary estimate for one variant
In this final version, I’ve incorporated all the feedback and suggestions. The whistle is now even easier to print thanks to improvements in the internal structure. With thicker walls and an optimized design, it’s also louder than before.…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for PETGSource material: PET
This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant
This female head part is designed to seamlessly integrate with Dummy 13 (Version 1) body design. Perfect for seeing the facial features!
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
Print approx. €4.46–€5.45 excl. taxPreliminary estimate for one variant
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Stroke its back with the stick to hear it croak. Mine sounded like baby frog. Croak depends on size and infill. I recommend 80%. Stick is optional. Its sounds great with other objects too such as chopsticks, pencil, even ur own nails. I…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This design is based on Fukar's design: https://www.thingiverse.com/thing:3245139 My additions/modifications are: Mounting options for both screws and magnets (10x2mm magnets) This design prints in one piece, which increases part strength…
Print approx. €12.85–€15.71 excl. taxPreliminary estimate for one variant
This is an extension piece for SilverCrest food dehydrator (SDA 350 A2) bought from Lidl Finland in 2019. Apparently this also works with a similar looking 2020 dehydrator model from Aldi Süd (Germany) according to a comment . I made this…
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Check out QR Code Stand → here ← Dimensions: Scan This to Try Out --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
larger compartments 80x35mm new design
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Insert 10mm is for an 10mm drill chuck Insert 13mm for an 13mm drill chuck I recommend petg because it has very good layer adhesion. 3-4 perimeters should be enough. I took 20% infill and it works well. V2 now available the only change is…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Introducing my Jinx Chompers! Quick Note: I shall be reworking the Vents & Prox. Sensors soon. I am not happy with their push-fit design. For now, you can glue them in place or print one and just scaling to fit the print. Will design a…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
The model is designed to be printed without supports. However, at a 0.2 mm layer height, some bridging areas may not print as cleanly. The magnet-ready version is available as a 3MF file. The hole is modeled as a negative cylinder,…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
Whether you've got flexible filament or not, these cases make for an easy print and a sweet looking phone. I designed these cases to print without support, so they turn out very clean. Both versions also provide a buffer for the screen…
Print approx. €1.67–€2.05 excl. taxPreliminary estimate for one variant
Somehow my factory tension housing cracked and I wanted to just print a replacement vs buy something GalvanicGlaze on Thingiverse posted a basic external shell which I modified to have the appropriate internal components for the…
English Update 2023-11-02: In the construction file, I removed a few minor errors that occurred when changing the depth. Update: Since PrusaSlicer can now also emboss text, I have added a print configuration file without text. So you can…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
As I am a huge fan of Garfield I wanted to recreate the classic scene of Garfield resting in his bed with his beloved Pooky by his side. There are only a few “constants” throughout my life - Garfield is one of them, and I love him dearly.…
Print approx. €20.23–€24.72 excl. taxPreliminary estimate for one variant
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain. Note: this has only…
Print approx. €0.90–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
This is the flying scale version of the V2 Rocket previously published as a static model. The tail section now has mounts for the motor tube mounting rings of which you will need to print x2 of. The motor tube is a cardboard BT-50 tube…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Based off Zack Freedman's pretty useful Gridfinity stoarge system. Original model I used can be found here: https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e43a9d5084dee87f7ba More info on Gridfinity can be found here: I…
Print approx. €5.10–€6.24 excl. taxPreliminary estimate for one variant
Insert the clips by turning them around inside the slot of the extrusion. I hope this will help cleaning up your cable mess.
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
If you plan to stack IKEA tables, use these leg extensions to secure the tables on place and have a bit more space for operating the printer. Works perfectly with my IKEA table spool holder ;)
Print approx. €10.08–€12.32 excl. taxPreliminary estimate for PETGSource material: PET
The Hotrod Racer Balloon Car by Polly-Jeanius is very cool, but it requires you to use glue, and I'm not particularly eager to use glue. Therefore, I have remixed the model using slightly modified axles from my building kit to allow me to…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
The last Pot and planter design inspired by japanese lanterns. Circular shape Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print) Prints very good in…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant
I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
I continue my streak of classic comic inspired 3D statues / dioramas / sculptures (more are in the works, be sure to follow if you want to be notified). This time around I decided to create my personal interpretation of the classic red…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
MultiMaterial Print instructions E1 Blue E2 Black E3 Gold E4 Orange
Print approx. €11.59–€14.16 excl. taxPreliminary estimate for one variant
The frame of the tensioner ist bolted to the x-gantry. That makes it stiffer and it fits better to the aluminium bar. It also doesn't twist while the printer is moving along the x-axis. New parts required: 1x DIN M8 Screw 30mm or longer…
Do you like stock design and don't like stock tensioner? Here is solution. Parts: -Stock idler sourced from Prusa Research -Compatible shaft is Ø2.9-2.99mm, 15-16mm in length. -2x M3 nylon hex nut -2x M3x18 Socket head screew Print…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
fully working calipers with 0.02mm precision
Print approx. €2.74–€3.34 excl. taxPreliminary estimate for one variant
This Guy wire system for SOTA/POTA is a bit more than just rings for a Spiderbeam 7m mast: Its winders are also rope tensioners, like those used for tents. This makes trimming the wires easy and fast, exactly what you need on a windy…
Bed Scraper / Spatula This is a modified version of the PRUSA one. Handle width is good, I just wanted it thicker. Handle is now 7.62mm thick. (0.300” inches) All edges finger safe, except front blade edge. PLA scraper version for TPU…
Print approx. €1.38–€1.68 excl. taxPreliminary estimate for one variant
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
As suggested by several makers of Filarte3D's model, the closing force of the arm can be increased by moving the arm outside of the model - essentially bending the arm outward. This is exactly what I did - resulting in this model. After…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Found this plan, print it and found there was some room for improvement, so I made my own one base on the general idea of it. The main improvement is that you can place this tray in the hole in the middle of the original part of the…
CArts Little Acro EDF-Version Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 600-650 g Drive: EDF 50mm diameter Propeller : folding propeller Battery: 3S Lipo 1000 mAh Controls: elevator / rudder /…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
NEU: 10.06.2024: Die Dokumentation Issue 1 ist fertig. Auch als als zweisprachige formatierte offline PDF Dokumentation (WORD basiert) zum Downloaden This documentation is available for download here as bilingual formatted offline PDF…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET
I personally printed this at .10mm layer height, but any layer height can be used as the details are not too intricate, and the lack of sloped edges means that you will not have to use any filler primer to smooth out the edges. This was…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for PETGSource material: PET
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Introducing the Voronoi Heart-Box: A Unique Fusion of Elegance and Functionality Embark on a 3D-printed odyssey with our enchanting Voronoi Heart-Box, where innovation meets emotion in a dance of intricate design. This translucent…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
This is a very simple model of the Russian cruiser " Moskva " with an artistic impression of the hull damage she sustained before her sinking on the 14th of April 2022 . Printing Nothing special. Both models have slight overhangs but…
By day I'm the CTO at a big-name media company and I wanted to design a tool I'd actually have my own designers use for quickly mocking up their app and mobile web ideas. This template is scaled to the size of current “large” smartphones,…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
I've released a new, improved version of this container. Check it out here . Note: this model MUST BE PRINTED IN VASE MODE . If you print it in normal mode, you're just going to get a solid cylinder. This is a desiccant container designed…
This illusion shows the Disney castle from one view and Disney from another
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
Introducing the SuperPINDA Precision Adjuster! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe. This first version is specific to the Prusa i3 MK3S+, however the Drill Bit…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Author: Prusa Research (Dominik Sauer)
Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…
Print approx. €7.56–€9.24 excl. taxPreliminary estimate for PETGSource material: PET
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
This prints in two halves so that either half can be held in the default accessory-holding hand of LUCKY 13. This does not need any supports. Edit: I've now included a full hand replacement that tends to be more stable than the two-part…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Percussion Frog 90% infill, WITH SUPPORT, only in the mouth In Prusa Slicer, you can now easily add support manually with the brush. But it's still not that easy. So here are my .3mf-files (for the MK4). Two versions: Original size and…
Print approx. €5.50–€6.72 excl. taxPreliminary estimate for one variant
Cover Your Original Prusa MK4's Extrusion Rails. Keep dust and debris out of your extrusion rails while adding a splash of color to your printer. Issues Addressed: Preventing dust and debris from accumulating within the rails, ensuring…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
My Voron 2.4r2, 300mm, is fully paneled with Plexiglass. I designed these feet to be used with 450mm 2020 extrusions for the ERCF MMU and still be able to utilize panel clips, and be able to remove the plexiglass panels for printing PLA…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Literally just took the original Prusa Mini gcode file and in text editor changed the M92 line to M92 E415 in order to print well with a BondTech Extruder. Thanks to JamesHZ (https://www.printables.com/social/116023-jamehz/about) for…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
This divider fits the Stanley FatMax professional organizers. Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 20%
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
There are lots of different statues of St. Francis of Assisi, but this is one of my favorites because of the bird in his hand and the bird on his shoulder. :) See also Version 2 . I created this model by scanning a cement statue from my…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
These holders har small and thin on purpose so they are cheap to produce in large quantities. If you need a big and very solid product - this is NOT it. But the will hold up to normale use just fine. Hope you like it.
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Einfach ein oder zwei dieser Räder zwischen den oberen Koppelriemen der Z Achse klemmen. Die Riemenspannung kann durch außermittigen Versatz erhöht werden. Das Riemenrad bleibt automatisch in Position und ist wartungsfrei.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
