Counting matching models…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
Extra skinny nozzle for the M18 Wet Dry Vacuum, intended to be printed in Vase mode. This pretty significantly affects airflow, so it likely shouldn't be used for extended periods of time. However, it's very convenient for getting in…
While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…
Update 1.1: 17-AUG-2023 Made several small model improvements that collectively should improve the printing experience: Made the “cone” portion of the connector smoother on the outside (looks better) Eliminated the (extremely small)…
Remixed from gdrag's Silica gel spool container. I remixed the container to a skinny design since I have some spools with smaller internal diameters. If you print it, do not forget to post your make!
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…
Remixed with longer trenches, as well as less material cost. Remixed with no needs for supports.
This is a great model that has been very popular in recent weeks, so I thought to add multiple iterations of it to make it more thrilling. * Also important note, whenever your removing the file from the print bed make sure the bed has…
I make overnight oats in mason jars for breakfast and always hated that a ½ cup measuring cup was larger than the mouth of the mason jar which made it difficult to pour into without spilling. This was my solution. It is the same ½ cup…
***IMPORTED FROM THINGVERSE*** This is a remix of LimaConRum's 12 Can dispenser to hold the skinny cans (Truly, White Claw, etc.). I also made a new pin that is not tapered. You might need supports on the pin. I recommend you sand the…
Hello everyone! This is a 3D printed replacement dart pusher/breech for the Nerf Pro Torrent that allows for magazine swapping without needing to prime the blaster. While you can load and unload a magazine in a stock Torrent without…
🛠 Customizable in Your Browser Adjust size, height, clearance, and more so it prints exactly how you need. Customize it on the Lunar Prototypes website. No slicer hacks or CAD required. Build Your Version Now See below for more details…
Quick print clips to hold your Wii sensor bar on your new fancy skinny TV. Includes an OpenSCAD file you can customize to make your own. Also included STLs for TVs 5mm - 10mm thick (in 1mm increments) and 4.2mm which is perfect for an LG…
Wanted to replace the smallish ball style shift knob for the Logitech G920 Shifter. Made a couple other versions including some memes for my friends. Reuses the existing screw from the Logitech Shifter. Printed with PLA+ at .2mm layer…
My wife takes forever to finish drinks, and she likes these seltzer thingies. Figured I ought to make her a Koozie for them! Category: Kitchen & Dining
Nozzle attachment for the Shark Vertex vacuum and presumably other models using this specific trapezoidal nozzle shape.
Remix of the Nexus Pro skinny pusher that adds extra length to remove a lot of the slack during priming. As a result, this pusher can no longer feed full length darts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Allows unprimed reloading on your Nexus Pro!
Slip Skinny Blue-Eyes - Frogfolk Tabletop Miniature
A quick 3D mock-up of Adafruit's Skinny Wheel for TT DC Gearbox Motors. Just in case you would like to print one for your purposes or make any changes to the hub that you may need. I printed the hub from ABS and the tire from TPU.…
The original 3mm walls of the TUSH (The Ultimate Spool Holder) were way too thick to fit inside of the generic cereal boxes I had while using a 68mm wide Bambu spool. The walls in this remix are 1.4mm, with added reinforcement along the…
Based on monokeith's Dyson V10 tool, but skinnier - tip is 7mm thick
Won't match the metal vanguard breech in performance, but should be a slight improvement over the original printed part, and of course allows for loading in mags when the breech is closed.
EXPERIMENTAL / WIP Remix of the skinny pusher. Eliminates slop, and the telescoping piece, to decrease areas of air leaks. ONLY WORKS WITH A MODIFIED BREECH
Empty Spools = Stackable hardware storage I used empty Jayo spools (many others use these - and the holes align with even more) to create the base for a stackable hardware storage solution. This is V1 and there will be changes. The M3x6mm…
A simply blank skinny tie clip that you can customize. Category: Accessories
v2 as ready to print less part (integrate sherpa mini mount ,more stong, with 2 4010 fan, with out standoff but passing screw and m3 threaded inserts i had soon as possible more info.. happy print skinny carriage for wanhao gr2,…
Remixed from SomeDingus's brass breech to allow you to load and unload mag without priming the blaster
Yet Colster adapter for tall skinny cans
I changed the handle to fit a logo clip for our school news. Used Sunlu black PLA Printed on Creality CR-10
I changed the handle to fit a logo clip for our school news. Used Sunlu black PLA Printed on Creality CR-10 Edit… I have added a plate for a logo. I made two versions one is all in one piece and the other is in two parts.
A friend is decorating some of these blank tumblers and wanted an insert for the lid she can glue other things to. Could just as easily use it as a base to 3D print a design to go in the lid, but she just wanted blanks. Specifically fits…
Transform your workspace into an elegant gallery with this stunning 3D printable figurine that captures sophisticated style in perfect detail. This graceful female figure showcases a fashionable woman in flowing dress carrying a designer…
This is a designThis is a design based off of Slant 3D's “ based off of Slant 3D's "Slant 3D Open Handle Tumbler .STL" For best results, print in PET G
Transform your workspace into an artistic showcase with this stunning female character 3D print STL that captures elegant curves and graceful posture in incredible detail. This sleek figurine features a stylized anime-inspired design…
Sadteeto made an excellent Starlink Mini mount for most standard roof bar sizes. I have a solar array on my roof bars which gives me little to no space for the mount so I had to make it skinnier. It now fits between my panels and still…
Skinny version of the normal Dummy 13 forearm, intended to be used without armor. The armor may still fit, but I make no guarantees that it does. Designed for use with the Dummy 13 digitigrade legs by CraftyPinappl but should work just…
Capture elegance and grace with this stunning 3D printable female figurine STL model that brings sophisticated artistry to your collection. This beautifully sculpted statue features flowing curves and a confident pose, making it an…
Design Concept The Sad Skinny Bunny Figurine is designed with a unique and expressive style, highlighting its elongated features and droopy ears. Its minimalist texture enhances focus on the design while evoking a whimsical, yet somber…
This is a simple design for an adapter to securely hold a skinny can (such as taller sparkling waters, red bull, you name it. It has been confirmed as a good/snug fit in two vehicles, a 2020 Toyota Rav4 Hybrid, and a 2019 Chevrolet…
Circus of the Past - Oddities - John Robinson's Ten Big Shows - Skinny Man (George Moore) - 1905 3D printable model.
I used two M5x6mm Screws however it would hold just fine with glue. Printed in two pieces to make the clip stronger by printing on its side. I didn't use supports on either model and it turned out fine.
SKINNY BOB — EBE-047/07 Subject 1. Zeta Reticuli. Výška 132 cm. Váha neuvedena. Nejslavnější mimozemšťan internetu se poprvé objevil 13. května 2011 na YouTube účtu bez profilovky, bez popisu a bez historie. Zrnitý černobílý film,…
Prusa Slicer will automatically add a Color Change (M600) at line 16 for you (otherwise, you can add it yourself). I printed at .16 layer height with 8% infill.
Fits OOD 1.83 x 250mm Spring Better! (May also be recommended for other springs in use but other springs are untested.) Still works with other spring sizes such as 1.45 x 250mm. The one with spacers on it is the original. Use with…
See original model for details: https://www.thingiverse.com/thing:4928394
Just a simple adapter I threw together to hold a particular kind of hand sanitizer bottle to my bike. Might mess around with making it parametric to fit different bottles and bike frames, if there's interest. Category: Tool Holders & Boxes
A small airpump powered protein skimmer that I designed for my pico-marine tank. The airline goes into the base and into a limewood airstone. There's a cup to capture the skimate which incorporates an overflow hose barb. The overflow hose…
an enclosure for btt eddy it has allowed me to recover about 6mm of bed mesh scanning room Depending on the mount points location this may be helpful to others ABS, ASA or other heat resistant filament is required
Recommend Print Setting: 3 Wall loops 4 Top & Bottom shell layers Object Height (Z) - Minimum 4-5mm Designer DemNuhBad
Recommend Print Setting: Wall loops - 3 Top & Bottom shell layers - 4 Seam position - Back Object Height (Z) - Minimum 4-5mm Designer DemNuhBad
Recommend Print Setting: Wall loops - 3 Top & Bottom shell layers - 4 Seam position - Back Object Height (Z) - Minimum 4-5mm Designer DemNuhBad
A humorous sign to remind us of our youth. put it by the pool, lake or pond.
skinny can holder that says MAMA on it.
Simple ring. I used a raft and came unstuck really easily, there's not much to it. ID: 27mm OD: 36mm
Recommend Print Setting: 3 Wall loops 4 Top & Bottom shell layers Object Height (Z) - Minimum 4-5mm Designer DemNuhBad
Print at 0.2 layer height and 100% infill. Thicker layers mean a stronger print. I used PLA, but you can use ABS or PETG if you would like. Print with the two O-ring end down and use supports.
I originally designed this for chopsticks but found its useful for any skinny item like lab stir sticks, straws, etc. It warped a little during the heat cycle but it does not effect function. Have ran through several loads and still…
I needed a way to attach the gold greeble "button" to the 89 Sabers Skinnyflex being able to remove it later with little work involved. This is designed to have a 6mm x 3mm magnet for the center. You need to glue the magnet in to where…
The thumb rest of the Ploopy Mouse felt really uncomfortable to me and most importantly made it hard to lift the mouse. I tried removing it from the model; I couldn't do it so I took to fiverr and paid somebody to do it for me. They did…
RET 11027 V1.00 Short Dart Skinny Pusher for Retaliator/Prophecy/Rampage Style PTs. Additional Parts will include: Worker Retaliator/Prophecy Plunger tube (Stock plunger work too) Longstrike Metal Catch and Dart Gate Retaliator sized…
Transform your workspace with this striking 3D printable figurine that captures modern street style in stunning sculptural form! This detailed STL model showcases a lean figure in contemporary casual wear, featuring perfectly sculpted…
See: https://www.instructables.com/A-Simple-Tuning-Stand-for-Glockenspiels-Wind-Chime/ The original design was for use with one inch piece of lumber or an 8020 series beam. This piece was redesigned to be used with 3/4-inch lumber and…
An updated version of my previous duckling clip to fit better on non-Bambu spools. The inside cut out is smaller, flatter and the grippy-nubs (yeah that's a word right?) are more defined to fit tighter on both cardboard spools and…
Tool Bin for DECKED Tool Box Tray
With this pusher, you can now insert magazines without priming, and achieve 150 fps with mega darts using a K25 spring. Print with plenty of walls / 100% infill.
Modulus Longstrike exclusive Half Length Skinny Pusher. This is not compatible with Retaliator/Prophecy Plunger tubes as the rear seal for the pusher is a larger diameter due to the Plunger tube outlet's diameter being unique to this…
The Nexus Pro / Max Stryker Skinny Ramcore Pusher is designed to allow for mag swaps/reloads while the breech is closed. The inspiration for this design comes from VanGuard’s skinny CNC metal Caliburn ramcores. FEATURES: • Nexus Pro / Max…
Do you think a spoked wheel does look good enough for your project? then this wheel cover is for you! Prints very quickly and snuggly mounts on the face of the wheel to cover the spokes. This is particularly for Adafruit's Product ID: 3757
My USB hub was leaning and would topple when I added more than a few cords or accessories. This simple slip-on stand keeps it upright. Four worked for my setup, but you can likely get by with fewer. I printed mine with a .6 nozzle and…
PrusaXL Skinny Spool Bearing. Both options can support various spool width. Spool_Bearing_R4.3mf - print in place Spool_Bearing_R3.3mf - made to use proper bearings - recommended
A holder for long skinny objects such as pens/pencils, screwdrivers, scribes, etc. Can accommodate objects as large as ½ inches (12.7mm). Print 2 “grippy bit” parts in TPU and one “main body” in your choice of filament. Can be attached to…
The Half Length Skinny Pusher and Plunger tube block to convert the Nerf Longstrike CS-6 into a Half Length, Direct Plunger Blaster. These parts are not the complete kit and will require sourcing other parts to complete the conversion,…
This is a 3d scan of my pathetic, skinny hands done with my Metro X scanner in feature tracking mode, all for your enjoyment. If you enjoyed this model you can also check out my similar anatomy models below ↓↓↓↓↓↓↓↓…
I found a way to store my Skinny Minis in a Dungeon in a Box container using Gridfinity for the boxes and some spacers that will hold the baseplates for the minis. Credit: Dungeon In A Box:…
just a bit of fun i no longer skinny dip i chunky dunk as we get older some of us put weight on
TacticalPenguinz Larry the skinny penguin
This fit perfectly into the cup holder and allows so a skinny can doesn't flop around.
🛠 Customizable in Your Browser Adjust size, height, clearance, and more so it prints exactly how you need. Customize it on the Lunar Prototypes website. No slicer hacks or CAD required. Build Your Version Now See below for more details…
Insert for vehicle cup holders to hold skinny cans Compatible with 12 oz skinny cans tested with Alani and redbull
Not sure what settings are best to use but i used, " PLA 20% infill tree supports with 20% threshold angle concentric top layer " felt sturdy for my use.
Made for Skinny Ties but would work on normal ties as well. I recommend support for the dots or they probably will fail. Category: Accessories
A new 3D figurine generated by AI, a Creepy Skinny Cat. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
Insert for vehicle cup holders to hold skinny cans Compatible with 12 oz skinny cans tested with Alani and redbull
About Filament Used: Elegoo Marble PLA Model Geometry: The model is solid, allowing for easy scaling without altering wall thickness. Slicer Settings Global Settings: • Top Layers: 0 • Bottom Layers: 0 • Infill: 0% For the bottom, use…
Transform your workspace with this stunning western-themed 3D printable figurine that captures the spirit of the frontier! This elegantly detailed STL model showcases a confident cowgirl in classic western attire, complete with a…
Snap-on face plate for the TR-45L Skinny QRP ham radio. It has a large area for customizing with your own text.
Put the blade into the groove in the body with the slots lined up and push the blade lock into the hole. Hold the blade
The numbers are easy to paint in the slicer if you have a multi-color printer. If you have a single color printer, it is easier to paint by hand just because the numbers are larger and wider. Use the original model settings.
This is an adapter from skinny cans to make them fit big boy can accessories. It fits both hard and soft can covers, makes your can fat!
This model was remixed from the original designer iElectronCloud to work with a more common and thinner (1 cm) width camera strap as the original design was made for a PeakDesign Leash Strap. This attachment enables you to equip your 35mm…
I made a beer koozie for Michelob Ultra cans. I'm sure they'll fit all other cans of similar size. As for it's usefulness, I'm not sure how useful it is but it feels nice in the hand. Feel free to tweak it if you want.
I designed this for my wife to have a Christmas tree decoration to put around the house. She wanted it tall and skinny. It has 5 tiers. The 1st, biggest tier, is too big to print on a mini but all other tiers will so if you only have a…
