104 models
Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant
Model of a classic wooden sled. You can use it as a gift for children or as a Christmas decoration. Kit card also included. The joints are tight and solid. Assembled model size approx: 13 x 5 x 4 cm Print settings: No special settings are…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
The sled can be assembled without using glue. Sáně je možné složit bez použití lepidla.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Meet the Christmas Sledge — a stylish 3D printed decoration with a clean modern look! 🛷 Length: 100 mm 🎄 Perfect for minimalist Christmas setups, table decorations, or as part of a modern festive scene ✨ Simple, elegant, and designed to…
Print approx. €3.82–€4.67 excl. taxPreliminary estimate for one variant
This is sledge reinforcement of damaged part.
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
A tool that helps when you want to prepare the skid of a (sports) sledge. I guess the pictures do answer most of the questions. I used M5 screws and thread insert. Printed in PLA. 15% infill. The original is done in FreeCad and I've put…
Print approx. €3.84–€4.69 excl. taxPreliminary estimate for one variant
This is a replica of the Sledge hammer in real size. The original replica of the hammer (Scale 1:2 - 50cm) from Ubisoft can be found here:…
New file 2/7/19 that should address length and dart fit issues I had in earlier version. All versions work in mk18. This is a remixed version of slug's shell modified for printing. It should replace stock shells. I made one and it worked,…
This is a remix of xcnerd88's sledgefire shell. The barrels have been adjusted for a tighter dart fit, and the shell is tapered at the front for easier insertion. I have also added bars at the back to prevent pushing the darts too far…
The model is easy to print and easy to assemble. You will need: - the printed files - some glue - a piece of filament of the same color 1. Print the necessary models. 2. Glue the marked surfaces shown in the picture. Firstly fit the 2…
My daughter find some lack of her Barbie's winter equipment ;) So I measured Barbie's body and prepare this sledge model. Very simple construction and easy to print but playful item :) Print your own! Print instructions Printer Brand:…
This handle was done by me to pull my sledge. The hole for the rope is 10 mm. Print instructions Should be printed with high infill to make it as strong as possible.
I made some size adjustments. I pulled in the bottom and widened the top, which allows for effective launching of Dart
Head for a SuperSledge from Fallout 4
Ergonomics design, with special holes for your rope / wire
It's hammer time. Simple, yet effective. It's a sledge hammer. Two-handed grip recommended. Two print profiles: 100% and 250%. In my test prints, printing it with the head on top printed a slightly cleaner version, but feel free to flip…
A Printable Sledge Hammer I printed this with a 1mm nozzle, .2mm layer heights with .6mm infill at 99%, total weight is 1.1 pounds. About 6.5 hours for the head and 5.5 for the handle vs. 40 hours just for the head at 4mm nozzle and .2mm…
This model is compatible with the lego system.
[Edit: Note that there seems to be a lot of variances unit to unit, so this shim will only work for some users.] The Qidi Plus 4 nozzle cleaning system leaves quite a bit to desired, but I hope I can alleviate some of the issues with this…
When for outdoor use use PETG or equal due to temperature influences. two halves to be glued together. therefore no supports required
Duplo sledge great for snow riding or as a helicopter landing skids. Note: Lego tolerances are very precise and your printer may not meet them. Maybe you will have to fine tune the model in your slicer (scale/flow/...). I added a file for…
Place the part upside down so that the threads and sealing surface are even. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Yes Resolution: 0.15 Infill: 95 Filament: U3Print TPU 60D Black Notes: Bed temp = 70…
Ich habe nach einer Möglichkeit für eine spielfreie Befestigung eines Schiebeschlittens an einer Mafell Erika 85 gesucht und diese Gleiter konstruiert. Die Gleiter sind optimalerweise 100mm lang und werden mit 95% Infill gedruckt.
Tool holder for mini sledgehammer. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 53,29mm H - 60mm We design all…
PETG Layer 0.2mm Perimeters 0.5 x 4 Infill 25% No supports
I recommend to use a heavy bey but any other type can be fine. The photo I took of the bit was built by a cut silicone nozzle that i glued to a bit that i soon made into a 3D model.
This is the original version, the version that doesn't need pipes for hardware is here: What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed…
What would be the Achilles Heel of a Sledgefire? The long reload cycle perhaps. And to remedy this, in designing this monstrosity I have sacrificed everything: simplicity, optimal print orientations, even common sense. Still in terms of…
Couldn't leave the old version alone. First thing I did is make a groove to slot in the cut-off muzzle from the old barrel into the new barrel. now no gaping hole in the front! Looks smooth! NICE. I moved the breech a little closer to the…
Shell: Converts the Nerf Sledgefire to fire 1 half-length dart through a 17/32 brass barrel. Deactivates the air restrictors well enough without needing removal. The brass barrel must be epoxied into place inside the printed shell. I also…
I have three SledgeFires. The first two I cut up and modded, and the third i found in the thrift store with TWO ORIGINAL SHELLS. I want to keep this one stock… But that empty slot in the stock shell storage made me anxious. I tried the…
(EN) Sledge as decoration. Easy to assemble. (CZ) Sáňky jako dekorace. Složení je snadné.
Stamp to aid with cutting 1/16 Inch (.0625”) thick adhesive backed foam. Improves seal as required for many Sledgefire upgrades! Print as imported, no supports required. Place stamp on a piece of 1/16 Inch (.0625”) thick adhesive backed…
Clips for the Cryptid Sledgefire. Now with improved mega clips. Recommended print settings: 2 walls 15% infill no supports. You might need to clean up some of the cam-track overhangs with a hobby knife.
This has been tested extensively and works wonderfully. My first post, hope you enjoy it!
Made a single shot nerf shell and a MEGA shell for the SledgeFire using the “original” look of the stock shell. I would suggest NOT using the MEGA one if your SledgeFire still has the shell ejecting thingie in the barrel. It does get in…
I have updated the design, so the holder is sleeker without cutting down on ability hold heavy hammers. Sturdy hammer/sledgehammer holder for Multiboard is made to hold a 1.5 kg (3.3 pounds) hammer. (it will properly be able to hold a…
Perfecting the mount for SledgeFire stock. Made this for fun.
I wanted to shoot silly shells from my SledgeFire. I had to do a lot of shell cutting, but it worked, kinda. Maybe with more springpower, but it shoots Mega and 3 shot shells well. You can throw a MegaXL farther by hand, though. I made a…
Printed at 30% infill witch seams to give it similar squish to stock
It's a hammer. You hit things with it.
Here's the model that I made to act as a proxy for the Frosthaven summons, the Sledge Driver! The artwork for this guy is available online at…
well just a sledge hammer on a mini 13s head
Edit: I added another spacer. This one is even harder to put in but yields better power. Spacer for your Sledgefire spring. From eye it seems to be about a 10 fps boost. You should be able to push it over the nub that holds the catch in…
Use instead of original ejector at Nerf Sledgefire, to get out the shells automatically. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament: RedLine PLA, PETG Notes: Nozzle 0.4 Wall 0.6…
Tool holder for Sledgehammer 4.5kg/ 10lb. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 50.03mm W -91,228mm H - 62,5mm We…
hw required hw rn: m3 square nut x1 (5.3x5.3 thinner better) m3 hex nut x5 m3x16 x1 (for the lever hinge bit) m3x30 x3 (bottom lever hinge bit) m3x25 x2 (top catch bit) 016 oringx1 (breech seal) m3x20 x1 (sled ejector) 2-3mm elastic for…
thanks to soygama0404 for making the template i used for this bey
Gopro Mount Sledge and Jato
An alternate Wishbone part for the Cryptid that uses an M3 x 16mm socket head screw. If you have a set of M3 screws and don't want to buy a pack of M6 grub screws you only need one of. Hardware: M3 x 16mm Socket head screw. Just screw the…
Load modded Nerf Sledgefire with ULTRA-Darts. Original Ejector needs to be cutted to a hight of at least 12,5mm. Print Settings Printer: Elegoo Neptune 2 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Lightning Filament: RedLine PLA,…
Printed with “Amazon Basics - 3D Printer TPU Plastic Filament, 1.75 mm, 1 kg Spool, Black” on a Bamboo Labs P1P with 25% infill. This is designed to fit two GensACE Bashing 3S1P 5000mAh (133mm x 25mm), which I found on Amazon. As you may…
Modern Industrial Decor | 3D Printed Hammer | Polygon Art Object
I recently added a reversed GPM motor mount to my Sledge so I could run a Max6 combo. However, I couldn't find a good way to mount the ESC in the front of the car, so I grabbed a standard Hobbywing mounting plate and got to work in…
I designed this Thing as a replacement for a missing Sim-Card Holder in a new "B-Ware" Thinpad Tablet where the sledge was missing. I dont know how to call it correctly but i think its clear what it is. You may need to sand it a bit,…
Sledge's hammer from siege. Would probably work best with a fine nozzle to get the hammer nubs to print better. I used a 0.4mm nozzle and it turned out decently. Download 2 of the head parts and one each for the shaft.
So I had an old Sledgefire lying around that was toping out at a bout 1m range for one dart and the others flew out only when the stars aligned correctly. so i designed a barrel and leaver to transform it into an very strong single shot…
The most significant updates include: return spring around barrel: compression spring 20mm OD, 1,5mm wire diameter, 305mm long- shortened to about 170mm. shortening the return spring in combination with the modified pump block allow for…
This is the crossbar that holds the body posts on an ancient Traxxas Sledgehammer. I think it should be at its strongest when printed on its side, as is. I used ABS and it's holding together so far. Category: R/C Vehicles
Handles designed to be fitted to a cheap plastic sledge to make for even more snow time fun. Requires a couple of 3mm dia. bolts and nuts to afix
Printed a bottlenose Silly Shell with an 8 inch barrel. I wondered if i could fit the barrel on a SledgeFire shell. So I tried. And here it is. It will only work with a SledgeFire with the ejector removed, so keep that in mind. (won't…
These magnetic sledge holders use a 20x5mm round magnet to hold your tool in place. The magnet can be inserted (and possibly glued) from behind. A single Neodym magnet holds a 500g sledge even horizontally in place (see pictures)!…
This is a “Pro” version of the previous stock ( https://www.printables.com/model/1336550-sillysledge-stock-with-ammo-storage ). It is a little more sturdy, and has more area for the epoxy to stick. If you used one of my conversion kits to…
silly sledge v30 i guess, spent half a week prototyping the ejection but didnt get it to work, everything else dimensioned correctly works well, have fun! feel free to remix this again to get it to eject properly if you would like to ask…
This 4 part sledgehammer head was made as a prop for a youtube video. Printing: just print Assembly: Stick the pla2 part into the pla1 part. Then you can switch between the fakeplahead.stl part and the tpuhammer_tpu part. Video: (used at…
Print without supports 2h 22min to Print
Design is intended to be printed upside down. Pieces slide together to wrap around steel tubing of roll bar. Fit is very snug and glue is not required. So far this has held up well to bumpy drives around the pasture without issue. I'm…
Some sledge accesories I made for my son when he was young (2 years old) so he had something better to hold on to and a back rest to sit up right. He still loves and uses it today after 2 years. There are no external tools required, the…
These magnetic sledge holders use a 20x5mm round magnet to hold your tool in place. The magnet can be inserted (and possibly glued) from behind. A single Neodym magnet holds a 500g sledge even horizontally in place (see pictures)!…
Inspired by some other pen caps, i decided i wanted something truly impractical. Really helps you not lose your pen cap though! All parts are printed flat, and it needs a little superglue.
Do you have a S1000R (2021 and up)? Great bike! problem is, thieves think the same! so now you have to cary a brake lock or a chain with you to lock your bike. Unfortunately the S1000R doesn't have much space to stow a lock on/in. If…
This is a pretty simple dummy T-Bar. It is not the correct length nor does it have any holes for mounting in the car. (Neither do I recommend installing it, as it would likely break and cause chassis bending) I simply made it to help make…
Sliding locking openings and internal ramps so nothing gets stuck. I really love this weapon's design, so it seemed fitting to make a dice tower/box out of it. Nice clicking movement and interlocking panels make it feel neat to use! I…
If you used one of my conversion kits to make your SledgeFire shoot Silly Shells, you will need to replace the standard stock with this bad boy. Why? 3 shell storage! Conversion model (latest update):…
This is a nice mount to install a JR power connector into the Traxxas Sledge. I designed it so I could easily connect and disconnect my custom light kit. It slides firmly onto the T-bar and you can install a female JR connector into it…
Wanted my SledgeFire to look like a sawed off stock. Also using this a test model for a future SledgeFire stock idea.
A friend of my daughter needed a prop sledgehammer for her Halloween costume, and I hadn't had an opportunity to do any 3D modeling for too long so I hopped on the chance to create this prop for her costume. This sledgehammer head is…
Attribution of models in images Dummy 13 Version 1.0 by Soozafone is licensed under CC BY 4.0 Insects nature tube - Copyright © 2026, Wild Republic - All rights reserved Attribution This work, “Basic sledgehammer for Dummy 13” is an…
I've made a spacer for the SVS PC-13 amplifier upgrade. It has been test fit with the original Bash amplifier and the Sledge 1200D in my 13 Ultra. The height is 10mm but it can be scaled to fit your specific subwoofer needs. Be sure to…
It is a SillyShell holder and rear sight for the SillySledge, a SledgeFire that has been converted to shoot SillyShells. If you use the SillySledge Stock AND keep a shell in the barrel, that's 6 shells ready for use! There is a little…
3 barrel shell based on the remixed model, you can modify hole and chambers sizes using boolean in the blend file. maybe make your own 2 shooter shell version 2 is tight, version 3 is looser
I had an old broken 8lb sledge that I couldn't find a wooden handle for. I 3D printed this one in PETG carbon fiber and epoxied it in. Things I used: * carbon fiber filament ( https://link.amazon/B0grwLV6b ) * epoxy (…
SLEDGEHAMMER Dual Y axis drive. Ever wish you could get your old ender 3 to preform like newer machines without spending I a ton of money. my goal is to keep these ender clones out of the landfills and keep up with more modern machines…
Bracket for a Siege Sledgehammer replica.
A cool sledgehammer style eraser for your pencil and it is a better eraser than normal pencil erasers Its a tight fit so you don't need glue Its super fast and takes 6 min Print with supports on and use PLA The eraser is one of those…
Please post makes and comment what planes you want to see next! This model is compatible with all weapon accessories.
If you like using the Mini Trio silly shell but also want to load it into your Silly Sledge, use this barrel! Untested, but it should work ok. If not, let me know.
I had an old broken 4lb hand sledge that I couldn't find a replacement wooden handle for. I 3D printed one with carbon fiber filament with 60% infill. I epoxied it in. Things I used: * carbon fiber filament ( https://link.amazon/B0grwLV6b…
This is a non commercial 3d print model, I have NOT printed it yet. Sledge Queen belongs to Archeximus and the creators of the Roblox game Decaying Winter . https://www.roblox.com/games/13438553315/Decaying-Winter 3D model derived from…
Little props for your Christmas elf's nightly mischief: a ladder, a sledge, a pair of skis with poles, a mug of cocoa, a magnifying glass and a NICE LIST sign on a stand. Sized for the usual 25-30 cm shelf elves and soft toys, and a handy…
This is a prop I made for my Fallout LARP. A super sledge with a mini nuke head. I call it the One Hit Wonder. It was for a looney Scavenger/Tinkerer persona I used. He was sort of a snake-oil salesman that dealt in mostly broken trinkets…
Printed with “Amazon Basics - 3D Printer TPU Plastic Filament, 1.75 mm, 1 kg Spool, Black” on a Bamboo Labs P1P with 25% infill. This is designed to fit two GensACE Bashing 3S1P 5000mAh (133mm x 25mm), which I found on Amazon. As you may…
The most significant updates include: return spring around barrel: compression spring 20mm OD, 1,5mm wire diameter, 305mm long- shortened to about 170mm. shortening the return spring in combination with the modified pump block allow for…
![Nerf Sledgefire powerdart mod [NO HARDWARE NEEDED]](https://media.printables.com/media/prints/894945/images/6847490_bbc94f38-c88f-489f-859f-7e59c8f183c2_066ac319-792a-459c-9886-44572a479ea5/1716921545944.jpg)
