976 models
Fixed some issues where it was fusing in the last few vertebrae Will print well with 0.6 or smaller (not sure for 8mm ) Simple remix/remake/Fix of the original model made by sunset Guarantee no fused vertebras (unless your printer is not…
I designed this as the final version of my Coat Hanger Hook collection. Even though my previous two versions were extremely well received, there were a few requests for a smaller version as not all bags could fit over the hook profile.…
177x190 honeycomb section, fits on Ender 3/5 beds. Should still tesselate properly.
I printed the 16mm version of Waveman's sturdy infinity cube (thanks for sharing!) https://www.printables.com/model/88525-sturdy-infinity-cube but I discovered that it was fused just enough that I needed pliers to free the blocks (and…
Easy to print and use, no glue required to assemble. Bigger Version Printing in PLA, 8 to 10% infill should be enough. Do not use a brim or raft.
They are super easy to clip on and remove from the spring-loaded sliders inside the CFS lid. One is with SUNLU written on the top, other one without text. EDIT: Because of someone commenting 5mm is better than 6mm I added a 5mm version.…
SMALLER Organizer for USB cables and chargers - 5 slots | REMIX 5 slots instead of 10 | +1.5cm-version | rounded edges | EU/US/UK Charger versions note: Reduced the slots from 10 to 5 and rounded some edges. Also there is an additional…
I cut the 7x10 grid baseplate that fits the IKEA Skinny Alex (9 drawer) into parts for smaller printers (like my Ender 3s). You will need to print 2 of each file for one complete drawer. All parts are interlocking and reversible.
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
I love the IKEA SKADIS concept and wanted to use it on my desk and my childrens desks. I like original concept from Casta brico , which is simple and functional, but I needed to modify it for printing on the Prusa Mini printer. Whether…
Print your own Hobbit house. Please publish your makes. Check out my larger Hobbit house:
Printed with tree supports in PETG.. prints clean. Thanks again to Doug for his work. Made this remix a breeze.
The handle should now work for cans with smaller caps, such as this one. Have fun with it and please share your makes :)
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
This is a wearable Batman Cowl Split into 12 piece with built in locator pins included on each piece. Fits on smaller printers. Play around with your part's placement on the bed for the most cost effective results. Each part is labeled…
Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Two simple hands so that DUMMY 13 can hold a rifle realistically.
1cm shorter body and spindel for nipple clamp published by Tomas and RiverCharlie https://www.printables.com/model/413562-100-printable-clamp-not-only-for-nipples…
House This house is smaller than my first: http://www.thingiverse.com/thing:1688195 It is also not modular but instead easier to print and assemble, being only two parts. You get to choose if you want a chimney or not.…
Height should be adjustable between roughly 60-80mm. I also changed the magnet slot to fit a 6*3mm(d*h) Magnet. Also the top part was modified a bit to be just round, i didnt like the “spikes” on that part. I also included a locknut, but…
I don't think there is a need for such a complex Pot in the Modular Hydroponic Tower. In fact I prefer a more minimalist design. I simply cut of the last part of the Pot. As a result now 9 pots can be printed in one build plate, and I…
After my last upload ( https://www.thingiverse.com/thing:3175533 ) I have decided to improve the design, and make it avaliable in some smaller sizes; -The smallest coin purse is smaller than a standard sized credit card, perfect for…
Made a smaller version of the wrapping paper cutter, the original one was comically large on my flimsy wrapping paper Should have but didn't fix the weak point in the print, maybe in the next iteration :P
Improved Qidi Box Desiccant Bin – Reduced Hole Size + 3 Variants This is my remix of the awesome silica gel holder originally designed by @R985_3546396 . His model works great and fits perfectly in the Qidi Box — but after printing it, I…
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…
Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…
I had some silica gel lying around, and I wanted to make a container for it so that I could use it in my filament drier. I was searching for a good one, but they all seemed to have large holes that would only work with larger silica gel.…
>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…
This is just the beautiful model of a tavern split up to fit smaller printers. So on my 222x222mm printer those print beautifully. Since cura had some issues with the big stl-size of the roof-2 and roof-3 there are also .obj files which…
An even smaller jack ( Mini Jack ) is now posted with 4 faces and a reworked rail to remove the small ‘tag’ that may break off of pumpkin shaping). This is a remix of thjelmfelt's Jack O'Lantern with snap on faces , but only 1 face (so…
I wanted to have a shorter arm length and maximize the Prusa Mini's print volume so I shortened the original arm. I printed it with Overture Matte Black PLA with supports on the build plate only.
Having ball bearings running in metal sleeves results in a smooth action and a more compact SpaceMouse. Hall effect joysticks eliminate dead zones and enable much finer control. The only issue you need to be aware of is manufacturing…
Prints just like the original and has thin walls around the perimeter so that it fits together seamlessly
Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…
The Pool Skimmers I found on thingiverse were much bigger than I needed and also the Bracket did not secure them nicely to my Pool, it kept working it's way loose and then lifting the bucket out of the Pool. I decided to try design my own…
This design is a variation on my original Honeycomb Interlocking Water Bottle Rack suggested by @herbert . This version is designed to better accommodate smaller water bottles (standard Nalgene, CamelBak, etc.). All tolerances have been…
This is a honeycomb holder smaller pliers. It is designed for this Knipex tool, but other plier could work too. https://www.amazon.de/gp/product/B005EXOF6S/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Print Option: PLA 20% Infill If…
Scaled down version of my 3d printed mini tool box. At only 187.5mm wide, it will fit comfortably on the Ender 3 and similarly sized printers. For those printing with the BambuLab AMS or similar units, print profiles with the color…
Same thing as the original by Brolin Workshop , but with smaller screw holes. Fits M3 screws and washers. Works great with these t-nuts which accept M3 nuts. Included is the somewhat cleaned-up STL in Fusion 360 format if you need to…
For top organizer, print 2 as they mirror. For drawer organizer, there are 2 pieces as there is an odd number of slots
Print the empty Bierkiste and this insert. Two of them stack on top of each other and fit inside the Bierkiste. Holds up to 20 pieces of CR2032 or smaller (CR2025 etc) coin cell batteries. Not very print-optimized yet: the walls could be…
Printable Mehrunes Razor from The Elder Scrolls Skyrim. This version is slightly smaller at 13 inches/330mm long, this allows it to be printable on the Prusa Mini's smaller print bed.
I found the tool a bit too large for some cables. So I reduced the overall size from 100% to ca. 75%. Fits now 110mm build plate (e.g. Voron 0.1). Many smaller cables (e.g. Micro USB, USB-C, phone charger cables) have a better fit now and…
Redesign of Catan player pieces with a lid. Fits with 5e Catan pieces The lid can also be placed on the underside when actively using. But I also added a version with a filled bottom, at which you cannot store the lid, but you don't need…
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
The original file takes 36 hours to print. This only takes 6 hrs. .1 layer height .6mm nozzle You can modify the .3mf file if you have a .4 nozzle.
The Terror Dog from Ghostbusters, I remixed the original file in order to create one with smaller thicker horns.
A small edit to shrink the size of the Incastro Desk Organizer to better suit those with compact printers or those with smaller desks Smaller - One Small Attachment Smaller Even Smaller - One Large Attachment Smaller
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
I made slider slots 2mm shorter so it seem to work even better - triggered sliders now does not end in the middle of the slot, but at the left end. Instructions: Download this base Download large and small pivot from Kenneth's model…
I bought 4 different types of pegboard for my garage. Some had ¼ holes and some had 15/64 inch holes. All spaced 1 inch apart. Sy's peglock would not fit in the smaller holes so I used his fusion file and reduced the pegs from 6mm to 5mm……
WerkRaum's model (originally based on https://www.thingiverse.com/thing:2091732) is awesome, but I wanted one I could print in different parts rather than sand-and-paint. This version was remodelled from scratch using that design as…
Remixed model of Mini Hanging Storage Container to Smaller and Taller variant. You can use smaller 25 mm high version and taller 75 mm high version. You can see a comparison of both of these variants with the original model in the photo.
My custom version of the Polestar 2 charge cover, optimised to fit smaller 22x22 cm print beds like the Elegoo Neptune 4. The supplied .stl file does not contain the Polestar logo due to copyright reasons.
Here's a good looking 3D printable headset holder! 🎞 How i remixed this model: https://youtu.be/OCav4Wq6GeE 🔽 Original Digital Model: https://www.printables.com/model/199812-headset-stand 🔽 Remixed Digital Model:…
A fully modular guitar effects pedal board. Found the awesome work of Kilian here: https://www.printables.com/model/320009-modular-pedal-board-unlimitedly-expandable My only problem with that design was it wouldn't work well on my ender…
I love the original “Tokens of Inspiration” by Conr8r but after printing it I discovered it was a bit too large and wanted something the size of a regular coin. I tried scaling it down to 50% and printing it laying flat, but the result…
In the original version of this model I was able to fit most of my tea bags, but the smaller variants would not fit as neatly as I would have wanted. This was reason enough for me to make a version of the original that would fit these…
PLEASE READ CHANGELOG BEFORE PRINTING There are 2 “darkgreen” files depending on the measurements of your bridge mounting holes. The Amazon Minicaster I wanted to print the Prusacaster, but my printer was slightly too small to print the…
Remix of Cleberlop's poop bucket where I made the left side not stick out so the printer and bucket can sit flush against something on the left.
Hi! This is a remix to a model, splitting it into two seperate parts. It's easier to print on smaller machines now (; Please Like and comment if you enjoy (: If you want to split it into objects , go into the objects tab, and click split…
This helmet looks brilliant and very well done and all credit to Seankfields : ) I'm currently printing this helmet, but I had to slice up a few pieces to fit my 200mm x 200mm bed. I also broke it down a little further to eliminate most…
I split the cover to allow it to fit onto a smaller size bed than the original. After printing both pieces, 5 locking tabs click into place to join the pieces of the cover together.
I liked the original clip, but found it to be bigger than my needs. You can not simply scale down the model and print naively, since this will also scale down the size of the spacing between the prints, resulting in a fused print. My STL…
The original bridge across the palm of the hand was too wide. I just remixed it to make a smaller bridge. This object is considered a TOY prototype and not recommended for any practical use. Print and use at your own risk, since this…
Easy to print adjustable laptop stand. It's strong, lightweight and easy to assemble. Each file should be printed twice, suggested mirroring the support. Thanks to Presswerk65 and bartnijs for the original model! V3 Added a slimmed down…
FlashForge AD5x PTFE lined side access covers. Replaces the FlashForge enclosure kit IFS opening trim. This is an additional option to my swingarm guide system. This reduces the gap in the side panel and lined with PTFE tube for friction…
Oral B toothbrush head cover. Remixed to decrease the size and added drain / vent holes
This case was designed to lock together well while requiring minimal filament and able to be printed on most printers. I printed this on my ender 3 (Stretched to the limit in someplaces) and is setup to acomodate a Dual slot gpu, though…
This is a remix of Eriks Offline Dinosaur Earrings I remodeled it to make it much smaller/thinner to make the earrings lighter and more dainty. Now they are roughly the size of a small coin and only 1,4mm thin. I printed with a 0,25mm…
This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…
Smaller shelf. Modified the Hex plugs to fit better (original is tapered for some reason).
Modified Q3 stand to fit 235x235 or slightly smaller build plates.
Calipers designed for helping with sizing cosplay props like helmets and armour. Model has the arms split in half to be able to fit on print-beds of smaller sizes (up to 350mm arm-length on a Mini). Bolt & nut style mounting peg for…
I wanted to print this, but didn't have a printer big enough, or a way to cut acrylic. I cut through the internal walls to try to give the glue more to grab. My prints came out pretty rough, did them quick and dirty with a .80 nozzle, and…
Future Changes… The smaller version is a little stiff since the spring arms are shorter, I might try making them slightly thinner to compensate. You also need to loosen the screws slightly for it to work well since otherwise it's clamping…
This is a 50% version of the low-poly Pikachu remastered, by @AgustinFlowalistikAr The original model has a weakness at the base of the tail, that made it prone to break if used a little too much. Furthermore, the original model is kinda…
Print your own Hobbit house. Hollowed out per request so that lights can be placed inside. Please publish your makes. Original model:
Another version of my iPad Air Stand [ https://www.prusaprinters.org/prints/104638-ipad-air-stand ] This one is smaller (~113x106mm) and can be printed on a small printer like a Voron V0. The brackets have also been redesigned to have way…
This is a refined and smaller Version from my Remix from the EggSpeaker. Including all sort of Files :-) You should be able to print it with less than 800 gramms or 265 meter (Ø1.75) of plastic including support material. In my opinion…
this is very poorly edited, but I'm lazy. for other lazy people only. Thanks!
This page will be dedicated to a cut-down version of my 5-gallon bucket hydro tower. I have uploaded all of the other tower files to this page, if something is a bit too big, let me know so I can work on it. This will allow users to print…
I've been using the original model for about eight months and like them. Today, my wife asked me if I could modify the holes to make it easier to insert hangers. After a bit of discussion and playing, this is the model I came up with.…
This remix of Michal Fanta's model has been made narrower to accommodate a smaller print bed. The Changes and Additions: Overall width of box changed from 236mm to 204mm AAA and AA battery inserts have been recreated to hold batteries…
This is a remix of @Liebherk_269093 's clock hands. They are made to fit the clock movements I've encountered (the second hand in particular). Additionally, I've shortened them so they look good on smaller form clocks such as my modern…
I edited the corners for the Ikea Lack enclosure from pjp_innovation https://www.printables.com/de/model/388132-ikea-lack-enclosure I make the corners shorter on one end so that they fit on my square bed. the corners are 200x200 now. The…
Nespresso coffee capsule cup holder made smaller to fit Ender 3V2 build volume.
Made a simpler smaller clamp and attached a mounting point to it for ease of use / no hardware. Able to be used with original clamp screw. Printed on: Ender 3 Infil: 30% Supports: Only for the screw hole Quality: 0.2
I liked the original but it was too wide for the place i needed it so i remixed it into a smaller 7 case size.
I took the Cat Stand by Itzafezookie and shrunk it down to approx 60x60x7mm and extended the length of the tail to hold my iPhone 8 in its case and fit beneath the edge of my computer. The opening is 15.5mm so it should hold many…
Wolf (https://www.prusaprinters.org/pl/prints/122634-wolf) cut into four smaller parts to be printed on 20cm x 20cm printer. The whole model after gluing measures 35cmx30 cm. resolution 0.30mm It is recomdended to use supports. Infill: 10%
Just like the original but everything is smaller.
Filament spool printable on Prusa Mini or other printers with smaller bed. Usable for 3DFox filament refill. Print in ABS/ASA if you are using any filament dryers! Cívka na filament tisknutelná na menších tiskárnách, např. Prusa Mini.…
Another attempt to design a cheap and easy to make wide angle viewfinder for Fat Shot 617 and Fat Shot X cameras using widely avaliable parts. Less compact overall (longer but less wide and a bit heavier) but much more convenient than the…
Thanks to @Chrissl for creating the original design. This one was build from scratch up, but many things were ‘copied’ and inspired by the original design. Print in vase mode / spiral mode. If possible use lowest layer height possible…
I needed a dog poop bag to fit the smaller Flexi Leash sizes, like this one here , but models like those in the parent didn't quite fit (were too big). After getting frustrated and printing a few different ones, I realized it would be…
Original design credit: Steam Deck Dock/Display Stand by neebick - Thingiverse The original model is sized: 297.7 x 70.5 x 114.4 mm (approx. 11.7 x 2.7 x 4.5 in) The purpose of this remix is to allow the model to be created on 3D printers…
I wanted to print one, but 5 hours printing time was too much... ... Scaling down obviously messed with tolerances and clearances. => redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.…
The new smaller hook is designed for 2mm paracord (but it will work with 4mm). It's very simple to attach. Compared to other designs, this can be slid over the rope without looping the rope through it. Tip: To make mounting paracord…
I love the original idea , though I found it was a bit too tall which was not optimal. It's not much, less than 30g, but it's 30 minutes printing time too. So I made this quick remix, shorter and a new part allow hiding the magnets (this…
![[Cosmetics/Makeup Organizer] smaller very poor edit to fit my smaller 3d printer](https://media.printables.com/media/prints/805647/images/6234258_14e0db13-28af-43d0-a1f3-2da6d3e280dc_b44a724e-eb16-469c-8c7a-5e75deb32d0c/sem-nome.png)
