1,407 models
Updated - July 27, 2024 - added tolerance test and more tolerant sliding covers After receiving a number of complaints about the lid not snapping to the cover and knowing that each individual printer may not be configured to print holes…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Print it in yellow, fill bottle with some orange juice (and a splash of vinegar) - fruit flies like yellow a lot
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Edited for SODIMM compablility with DDR4 & 5 This model is made to hold 15 DIMM and 6 SODIMM sticks in an old smartphone box (Samsung A5). It can also be used as a standalone organizer or edited using the provided STEP file to suit your…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
A model of a standard, easy-to-print SodaStream cap. I didn't use supports, but if you don't mind taking them off, print quality could be better with them. There are two ways to print this model. One is to print out the complete cap in…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
A simple stackable tray for storing DIMM/SODIMM computer memory modules.
Print approx. €5.10–€6.23 excl. taxPreliminary estimate for one variant
This is a bottle holder for our Sodastream. For licensing reasons, I published this model without the Sodastream logo. There are two different versions of the lid. Once for the 1 liter glass bottles and once for the 0.75 liter glass…
Print approx. €5.66–€6.91 excl. taxPreliminary estimate for one variant
I grow tomato plants indoors during the winter, and use these adapters to help water the plants slowly via a 2-liter soda bottle filled with water. This set includes single, double, triple, quad, and six-outlet versions. Works best with…
Print approx. €7.15–€8.73 excl. taxPreliminary estimate for PETGSource material: PET
Sodastream Halter für Glasflaschen zum austrocknen. stabil / Standfestigkeit hoch / schlichtes Design Sodastream holder for glass bottles to dry out. stable / Stability high / simple design Print instructions Printer brand: Prusa Printer:…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
To easily transport your beer cans from the fridge to the garden or terrace. Two models of handles are provided for 330ml cans and 500ml cans. A very easy to remove support is required where the handle comes to rest. It is also advisable…
Print approx. €1.43–€1.75 excl. taxPreliminary estimate for PETGSource material: PET
This model was printed on a Prusa MINI+ printer with custom embossed text without any support. It can therefore be printed without the option of a multi-colour printer. In Prusaslicer, on the bottom side you create your own embossed text…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
A twisted stand for drying the Sodastream glass bottle. Designed in Fusion360 and printed with PLA Black without any supports.
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
I dropped my 1L Soda Steam Slim Bottle a couple times the and the bottom plastic base broke so I modeled a replacement. Just put a little hot glue in the bottom and boom…back in business. This model is designed to print with no supports.…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
Edit 17-6-2023: Thread has been made stronger and made more easy to place the bottle. The bracked now has an extra screw hole and fits better with the bath. Description: New version of the automatic bath. Fits standard soda bottles for…
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
The sturdy, stylish drip holder for glass carafes (Sodasystream Crystal) and plastic bottles brings order to your kitchen! The design makes it easy to put the glass carafes and lids in the holder. Der robuste stylische Abtropfhalter für…
Print approx. €10.66–€13.03 excl. taxPreliminary estimate for PETGSource material: PET
This storage box can take up standard 2.5" HDDs, SSDs, SODIMM RAM and regular ram. The print is pretty tolerant, use whatever settings you see fit. I recommend between .3 to .4mm layer height and a layer thickness of about .4 to .5mm.…
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for one variant
This simple design holds a wide range of wires to be soldered. It comes without needing to adjust the arm position or the locking mechanism. Each pair of fingers adjusts automatically to the diameter of the wire. The photos show two wire…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Easy to make a cute Soda Can keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Simple stand that allows the waterbottles to dry out. Fits bot sodasteam and wassermax bottles. Print with standard settings in PLA or PETG
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
A fun (and more stable) replacement bottom/base for the Soda Stream 1L slim bottle. You can find it at this link: OnShape 1L SodaStream Slim Base - Rocketship
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for PETGSource material: PET
Der Abtropfen hilft, dass sich in der Flasche kein Kondenswasser sammelt und richtig trocknen kann. Die Flasche steht dadurch fest und fällt nicht um. Habe für meine Freundin 3 Stück gedruckt und sie ist begeistert. Habe es nur für die…
Print approx. €1.93–€2.35 excl. taxPreliminary estimate for one variant
This is probably the 6th revision of this handle. At this point it functions and looks amazing and only requires support in one spot. Print files are 30% adaptive cubic infill with 3 perimeters. Your bottle should fit snugly, if it does…
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
This page description is a work in progress. Use this clamp in conjunction with my 2-Liter Soda Bottle To 0.25-Inch ID Tube Adapters found here. *Note: This post contains Amazon Affiliate links that support The Makers Workbench via a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Description This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model SpongeBob driving a boulder! Inspired by the…
Print approx. €7.41–€9.05 excl. taxPreliminary estimate for one variant
I created this small box to hold some SODIMM modules while refurbishing old laptops.
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Using empty Sodastream syrup bottles as containers for herbs, spices, and salt is a practical solution. Their narrow, tall shape fits perfectly in slim kitchen cabinets, saving space while offering high capacity. They are ideal for…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Deckel für SodaStream Glasflaschen mit 0,8l Inhalt. In den Deckel passen Dichringe mit 35mm Aussendurchmesser.
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Printed with PLA 1,75 mm. Used a standard Velcro band
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
Untersetzer für den Sodastream Penguin damit das überlaufende Wasser nicht immer auf der Arbeitsfläche landet.
Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant
I like "sodastream" bottles and use them while cycling. But when my hands are wet, unscrewing the original caps is very difficult. These covers for the original caps do the trick. They add little to their size (they are quite thin, look…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
Remixed a very well made can holder design, just a little so that it would attach to the Rovic brand golf cart. Clips on perfectly to the existing cup holder attachment “nub” thing on the cart. Doubled the wall thickness so it hopefully…
Print approx. €2.48–€3.04 excl. taxPreliminary estimate for one variant
Some things make you think ! This should have been a can holder for the can holder contest - targeted to add a better grip to a soda can and add a little funny twist. So I began to think…..and made the most out of it. The concept (third…
Print approx. €12.46–€15.23 excl. taxPreliminary estimate for one variant
Update March 2nd 2019: Rendered cut files now have an increased clearance on the dovetails. More options to customize positions of collars and strap buckles. Additional long hook to allow the bottle to hang lower. Description This is a…
Print approx. €10.11–€12.36 excl. taxPreliminary estimate for one variant
Organizador para desodorantes
Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant
My new Sodastream Terra was constantly releasing pressure through the left release valve, as of the first press, while pressing, and way before the bottle was partially (not even fully) carbonated. I read online it should make a…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
To easily transport your beer cans from the fridge to the garden or terrace. This template is suitable for certain narrow-diameter cans (57 mm or 2"1/4) with a capacity of 250 ml or more. (For larger cans with a diameter of 66 mm - 2"…
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Simple 2-part sodastream bottle stand that assembles for use, and disassembles afterwards in seconds for space-saving flat storage in a drawer (or similar). Printing: Material - anything you like really - not important. Silk PLA pictured…
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
Praktischer kleiner Sodastream Flaschenhalter
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Update I am working on a slightly modified version that will work better with Bambu Lab's “TPU for AMS” - which is a harder plastic than standard TPU. While the use of this new flavor of TPU is probably more applicable to Bambu Lab users,…
With way too much time on my hands, I decided to render my version of this handy gadget for opening soda cans from scratch in OpenSCAD. I picked a lot of dimensions off the original and this version seems to work well. More pictures and…
Soda can opener with option to use as lid for bee and other Insects, will also reduce spillage if tip over. How to use it: Open soda can Insert the soda can tap into hole in front Pull up to open the soda can Push it down to lock it on…
Meet Rocket Tab, a fun and functional soda can opener and lid that keeps bugs and bees out of your drink while you're outdoors — and seals things up if you're saving that fizz for later. The "PULL" tab design makes opening cans easier…
The tool serves two functions : Can opener – provides extra leverage for easily lifting the can tab Can lid – covers the opening of the can to help keep dust, insects, and debris out between sips The design has been tested on multiple can…
For sealing you can eather use a o-ring gasket D20x3mm or print the gasket with tpu or flex material. The gasket has to be placed on the bottle side inside the thread-hole Supports are only needed for the outer ring, i used a…
Your compressed air can is empty and you have dust to blow out? Then it's time to take a break and drink the perfect sparkling water. But unfortunately, your Soda Stream can is running out of air and the water isn't as sparkling? Good…
Adjusted angle so it will not spill fluid on sides. I use 5mm drill bit softly inside hole after printing to clear up any mess. And after some fast turning back and forth it will slide really well. When it slides really well its easy to…
These printable lids for steel food cans are designed to be printed with TPU to be flexible enough to snap on tightly to keep food fresher in opened steel cans. Update version 2: Added options for text on the lid and and pull tab with a…
Upgrade your favorite canned drink with this 3D-printed cover with lid for your soda can. Designed to fit standard soda cans, this reusable cover adds both convenience and style to your beverage experience. Easy-Drink Lid: Sip comfortably…
I remixed this mug to hold beer/soda can. There is a hole at the bottom to push empty cans out. Can be used for taller cans without the removable insert, or shorter can with the 12oz insert. No support needed. The original version of this…
A trap that works. Those nasty little buggers love getting in, have no clue how to get out
* Update 23AUG2018 - I added a long version for people who have escaping wasps! The extra long cone is harder for them to escape from. This is especially true of smaller bottles. This is the model I now recommend. * * Update 18AUG2018 - I…
***Update*** I have uploaded versions with a smaller overall diameter. I have a SodaStream Duo and it came with one plastic bottle and one glass bottle. I wanted to have a stand for them to let them dry upside down. So I did some changes…
Simple and easy to print replacement-nut for the pressure hose of the SodaStream Crystal 1.0 and 2.0 and SodaStream Jet. If you have the option, select the "Nut.stl" file. The other file, "Nut_Co2_side_slim.stl", is designed for the side…
This stand is made for the drying of SodaStream bottles. Multiple stands can be stacked , regardless for which bottle. Currently there are models for the following bottles: SodaStream DUO plastic bottle (30 mm inner diameter) SodaStream…
OpenEDS - Soda can opener It's the first tool of the OpenEDS collection . OpenEDS is made to create open-source assistive tools to make easier and less painful life for Ehlers-Danlos Syndrome people. Description With EDS, It's hard to…
Features: Prints in one part Fits on glass bottles (Sodastream crystal) Fits on plastic bottles Easy on your printer Many different designs to choose from Printing: Choose the design you desire for your bottle type and print it with at…
Introducing “The Lamprey”, a soda-bottle-cap-opening wrench! Originally made as an accessibility aid for people with arthritis or other grip issues. The design affords three hand positions - right up by the cap, in the middle of the…
I designed this to keep the CO2 bottle for my budget aquarium C02 fertilizing from tipping over. Fits an 425g C02/60 Liter/ 60mm diameter CO2 bottle Print instructions Used PLA, 0.3mm Layers
A quick print to allow you to turn 2 x Soda (Pop) bottle caps into a small pill box for if you want or need to take some back up medication with you. also allows for some fun home recycling and customization by selecting the Bottle Cap of…
This is the nut that connects the little black CO2 hose, the hose has to be pushed through the slot in the nut. Printed with PLATech for strength. No supports needed Print instructions Category: Replacement Parts
I was super impressed with mobiobi 's Universal Travel Coffee Gimbal but, being a man who enjoys beverages with more of a sparkle to them I deemed it necessary to have a Universal Travel Beer/Soda Can Gimbal that I could attach to my Golf…
Also a Sodastream lover? But washing the bottles for reuse is a burden? Here is a useful tool. From now on simply wash your bottles with mild detergent or clear water and let it dry upside down using the "DripSnout" From now on always…
yet another stackable crate for 500 ml cans. Supports needed. A version for 250 ml Red Bull Cans is available aswell the logo was made using this model
Lego cup resized to perfectly hold a soda can! 0.28 layer height is fine (unless you want more detail). You'll need supports for the handle and the shallow cylinder under the base, but the outer brims are designed to be support free (a…
This Lid can be used to protect your soda can from dirt and wasps
Just like the title says this is a cap for a soda can.
SodaStream Glasflaschenständer zum trocknen
I've been meaning to convert this awesome Helmet file from SW Episode 7 for a while, but the first version I came across looked all so wrong. The second Helmet was perfect with clean lines and very well detailed, I may have to split that…
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
Soda can dispenser / fridge dispenser Made to fit 6x 330 ml cans / 58x146 mm Flat top and robust structure to allow stacking of other items on top Groove to make stacking easier No assembly or glue Printing No supports necessary Print…
This is a simple but useful model I made in Fusion 360. It's a soda can lid, that serves one true purpose: to stop wasps from entering your soda cans or beers. I've encountered this problem several times in the past, and I was tired of…
i wanted something small to make with filament samples so i made this its about 30mm tall but can be scaled to real size if needed
An adapter to use soda bottles (European?) with your SodaStream machine. This adapter fits the older style of SodaStream threads (pre 2018?). What differs this from the others here on Thingiverse is the grip on this adapter to remove it…
Here is my aluminum can model. It's the 12 oz type that would contain soda or beer. I was going to make it to use with the can holder contest, but I was too busy to come up with a design in time. I made a version without the punt for…
This vine-style 3D printed koozie features an interwoven, organic lattice that feels like twisted roots or creeping vines frozen in motion. Lightweight yet sturdy, it offers natural grip, airflow to reduce condensation, and a bold…
Update 2 July 2019: Check out my vase/spiral printed cans https://www.thingiverse.com/thing:3726621 A snap on lid for a soda can. Soda can lids are standardized. This lid works on 7.5 oz., 12 oz., and larger cans in the US. Not sure if…
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Keep Your Fizz Alive! Keep your drinks fresh and protected with this newly redesigned can cover! Keeps dust, bugs, and who-knows-what out of your drink, especially useful if you're taking it outside or just want to leave it on your desk.…
Use case This cap should fit to most of the common soda bottles. It is tested on Gerolsteiner water bottles and on Schweppes soda bottles. Together with an old bottle and some kind of attractant (e.g. old grapes, sugar water, vinegar,…
customizable can lid To personalize go to: https://www.thingiverse.com/apps/customizer/run?thing_id=6760304
Two version: V1: Only one part. For plastic bottles (without additional positioning) V2: Two parts. For plastic and glass bottles (with additional positioning) Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No…
The video can be found on youtube: Text and pictures can be found on instructables: https://www.instructables.com/3D-Printed-Soda-Can-Slicer/
This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…
Nail Polish Shaped Can Tab Opener Practical tool designed to protect your manicure by opening soda tabs effortlessly. Featuring a unique nail polish design , it combines style and utility, making it a perfect gift for anyone who loves…
I got annoyed with the lack of good TPU lids, so i made my own. Small lid: Fits 25 cl cans (like Red Bull), Coca Cola product cans in EU (and other small brands of same size), Coca Colas can tops are 3 mm smaller in diameter compared to…
Its that time of the year, lots of birds around my home & work so I created this bird feeder that utilizes the PRUSAMENT spool half as a perch for the birds. The threads are PCO1881 specification, so it should fit most soda bottle types.…
This was a fun one for me. I started out by downloading UnimatrixRed’s model. Right as I was getting ready to start printing, I thought – I'll thread it (because I hate glue). That is the remix that never saw the light of day.... because…
Added a magnet hole, 6mm diameter, 2mm depth. The hole is not fully 2mm so magnet will be a bit above the surface, but still it is staying firm on the fridge, so it will be always close to your cans. With a drop of super glue you can…
This is a homage to my favorit scenes from Rick and Morty Season 1 Episode 1. More to come... https://cults3d.com/en/users/OneIdMONstr/creations Print in 50% for Elegoo Mars. Category: Sculptures
Un adaptateur pour les bouteilles sodastream en verre (Crystal) Bitcoin : 1DdrhYUJKzw3iEnvEhfff3Fox8DJin94F3
🥤 Soda Can Dispenser Deluxe – Sleek, Stylish, and Functional! Upgrade your beverage organization with the Soda Can Dispenser Deluxe! Designed in an eye-catching Voronoi-style , this dispenser holds a six-pack of 330ml or 500ml cans…
Protects your carbonated drink from going flat or spilling. Supports recommended.
Soda Can Mug, Can holder, Scifi Alien Style
My Keyring is full enough so I modeled a whistle which is also a Sodacan opener. Enjoy opening all the Soda you can drink while always having an emergency whistle with you :)
I saw a dad showering a kid from a drinking bottle. It did not look so practical. So i made a shower head to any standard plastic bottle! It works nicely. Update 23.7: I did a little bit smaller version of the cap. This one gives a much…
Edit: After many comments, I loosened the fit and made it two different files. I wanted to put some baking soda in my fridge to keep it smelling nice but I did not like the open box idea. I saw that arm & hammer sells these little balls…
Ball marker for the rapsodo mlm 2 pro Originaly designed by Kevin Wood (facebook) and tested by multiple people and me. Comments: - Sharpy or other waterproof marks can leave marks on an impact screen - Use the blacked marker you can…
Funko Soda Stand with Coin Slot and Text
So that nothing goes wrong when decanting and I don't need 3 hands, I have developed a funnel that can be screwed onto a soda bottle. I also use it to transfer silica balls into a container. I also made a funnel with an integrated sieve:…
