Counting matching models…
Works really great to aim the tweeters at the users ear level. Beware: Takes a little shuffling to fit onto the build plate, but it does fit in to the standard Prusa i3 MK3/s build volume.
The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…
Presonus 1824c knob Replacement : Tight Fit. After awhile the original knobs loose there grip and fall off all the time. Use these if applicable.
Speaker Stand for Monitor Speakers The Problem: if Monitor Speakers sit flat on a tabletop, the sound is not directed towards the ears. My Solution: incline the speakers upwards so that they are pointing straight towards the head of the…
I was wanting to maximize my desk space so I created this underdesk mount for a PreSonus Audiobox USB96.
Hi! I've edited the original model to fit a bigger E5 version of Presonus speakers. There is also a smaller version if you want to. 0.20 Layer, 20% Infill, No supports, no brim,
This 3D model is a custom-designed stand for the PreSonus Eris 3.5 speaker. It features an elevated structure that raises the speaker off the table, angling it for optimal sound projection and listener ergonomics. The stand also provides…
Ever since I got my Studio 1810C, I have been looking for a way to mount it underneath my desk riser. Because of the curved outer edge, using an off-the-shelf generic bracket system just will not cut it. This was my primary reason for…
A stand for the Presonus Atom. Print standing up and there is no need for support. Can be printed at .3 layer height
Angled base for PreSonus Eris E3.5 speakers. Measures 130mm wide, and 147mm deep, with a 40mm incline in the front and a small lip in the back to prevent the speaker from sliding. Cutouts in the version with holes are 25mm in diameter and…
Designed this bracket to hang my Presonus AudioBox iTwo under my desk. Also added vertical edition if you want to hang it off the back or on the side of a desk.
I printed in PLA+ with 2 walls and 20% cubic infill and it seems plenty strong for these small lightweight speakers. It's also very slightly oversized front to back to allow felt pads in the front.
Needed to make more space on my desk; decided to mount my speakers on the wall. Can be printed without support. Suggest 20% infill at minimum. 220mm x 170mm Shelf Mounting holes are a 4mm diameter. Center hole is just to save on weight…
I designed these for the PreSonus Eris 3.5 Studio Monitors, but they should work for any speaker. I included the Fusion360 file too, in case someone wants to modify for their own usage. Put some foam between the desk and the stand to…
A simple under desk mount for the PreSonus Revelator io24 audio interface. There is another mounting option available on printables , but it required more filament and screws than I felt should be needed and decided to make my own design.…
Just a tinkercad project I made as I wanted an angled base for my midi controller. Print without support in PLA. 10% infill, any layer height (printed mine at draft .28 for speed) No adhesion issues due to small bottom surface area. I…
Two versions, one with a smooth top (pictured) and one with a marker to see your volume level at a glance. 0.2 layer height Color change at 1.4mm height for effect in photo. Optional on smooth model but recommended for version with marker…
This is a simple bracket to mount the PreSonus Revelator io24 audio interface. I mounted it horizontalmy under my desk as having it off the top of my desk but very easily accessible was my main goal, and I think I accomplished that. I…
Unlike the other PreSonus XLR USB interface the io44 does not have an easy to see screen when placed on a desk. So, I whipped this up in TinkerCAD to solve a simple problem: when the io44 sits flat on the desk, you can’t see the OLED…
Original silicone ear bud tips are easy to loose, hard to get (costly, delivery time). This is designed for hard plastic (PETG). It can be redesigned for flexible ones. Print it laying the cut side up. No supports needed if you use thin…
Presonus Eris 3.5 V2 stand 30%infill reccomended
A remix of the linked model to work on smaller printers. Still works just fine in 2 pieces. took about 30 minutes.
I made this under desk bracket to mount my Presonus Mobile Studio 192 Audio Interface. But if you need a bracket that is simular I have included the original Fusion file so you can modify to your hearts content. The original dimensions…
Designed for the studio monitors that are standing on the desk stands. But because they stay behind the monitors, I needed to give a rise. But also required to face the monitors downwards, for sure. With the brackets on the sides and…
Holder for a 3.5cm standard headphone speaker. Model has two slots for zip ties. Can be used for Xbox 360 sonus mod. Cura indicates model errors, but everything prints fine, I just suck at blender. Supports may be needed on bed only for…
This is an under desk mount for the Presonus 44VSL audio interface with added drawers to create space from the under desk beams that wouldn't allow me to plug in cables. It should print with no supports, except the drawer handles which…
Printed in Prusament PLA with 15% infill and organic support, orientation on the build-plate as in the file.
Spectrum ONU (SONU) Modem Half Rack Mount. The Modem is around 46 in height, so it does slightly protrude about 1 mm on top and bottom. This is basically a closed front tray with a site hole for the modem status and drop downs in the…
I made a speaker stand for my PreSonus Eris 3.5 speakers. I included a little drawer so that I can store all the little things that end up on my desk. The stand has a small lip on the back so the speaker doesn't slide off. I also put the…
My three year old PreSonus Eris 3.5BT speakers died, so I made and printed a replacement. Story found here https://flashgamer.com/blog/comments/we-wont-repair-that-just-throw-it-in-the-trash Print in your desired material & color. The…
This is a stand for on the desk for the PreSonus Eris Studio 5 to have them angled toward tour ears better. I printed at 7% infill. It is quite weak but works fine. I recommend something more just to be sure. This model has a 10 degree…
vertical stand for the presonus audiobox ione
Check out the V2 model here: https://www.printables.com/model/1330744 --- Secures the Presonus EarMix 16M IEM controller to the top of a Sennheiser SR-IEM-G4 transmitter with magnets! Required Materials: 8x: 6x3mm magnets 4x: 3x8mm flat…
Stands for Presonus Eris 3.5 / by: Xetr's Studio Printed on: Elegoo Centauri Carbon Print time: About 6-8h < Instructions - Process settings > Material: PLA, PETG, ABS (I used PLA from Creality) Layer height: 0.16mm Nozzle: 0.4mm Infill:…
You will need 2x m4 30mm to add this stand to Headphone Stand - Industrial. It fits nicely.
This is a simple solution to hang your Presonus Eris 4.5 monitors. It makes sense if: 1. you need space on your desk and have something to hang them from (or are willing to hang them from the ceiling). 2. you want your old monitors to…
Keeps an EarMix 16M on top of a SR-IEM G4 transmitter unit! This time without needing magnets or any additional hardware. This design aims for a closer slim-fit around the edges of the EarMix, adding guards around the front, rear, and…
a speaker stand built around the presonus eris 3.5. this is the v2. i reinforced it and rounded some rough edges
A Speaker stand built around the presonus eris 3.5. this version has a wall but check my profile for more versions
Made this enclosure for modifying the PreSonus Eris 3.5 gen1 tweeter with an aftermarket solution. This should allow a snug fit, the original grommet is still recommended. 4* M3x5x4 heat set inserts are required on the front facing piece…
Under Cabinet Speaker Mounts Specifically fits the PreSonus Eris E3.5. Under Cabinet Speaker Mounts - Designed to suspend speakers with straps or hook & loop fasteners for vibration isolation. The model is designed in two interlocking…
Simple little stand that holds an EarMix next to other EarMixes. This keeps them from toppling over each other since the hardware unit itself isn't flat on the side. I didn't need supports when printing on my Bambu A1. Small enough…
I made a speaker stand for my PreSonus Eris 3.5 speakers. I included a little drawer so that I can store all the little things that end up on my desk. The stand has a small lip on the back so the speaker doesn't slide off. I also put the…
