407 models
Box - Doesn't need supports but I've noticed the screw/magnet holes are not super clean. If this bothers you add some support material there. Lid - Print with the 'Blade" text side down. Should snap closed, might have to clean corners for…
A disposable mixing pad with a small spatula designed for mixing epoxy glue, resin, or other adhesives. Quick to print and using only a few grams of filament, it’s perfect for fast workshop use without cleanup. Ideal for printing from…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I created a small disposal box with various diameters and container heights with this design. The lid with the hinge is printed in place and screwed onto the container. There are no supports required for this print, and I recommend…
This is a little 50mm (dia) x 60mm tall can for disposal of old/used hobby and utility/box-knife blades. It's sturdy, strong (even when printed in PLA), and printing it should be relatively quick and inexpensive. I had a growing pile of…
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
A simple box with plenty of storage for used single- or double-edge razor blades. Instructions Print the One piece as is with 0.15mm layer height for smooth curves. No supports needed. The object includes support structures to reduce…
Use tree supports on build plate only. A compact disposable glue mixing pad with a small roller applicator. The tray can be used for mixing and holding glue, epoxy, resin, or other adhesives, while the roller helps spread the material…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
I like this design. I wanted one for my garbage disposal side, but the dimensions were not right. I didn't want to scale it, so I created a Fusion 360 design using the eyeball method. The design (included) is set for 85mm diameter and…
A container to safely dispose of double edge razor blades. Print settings Material: PETG Layer height: 0.20 mm No supports. Notes Print upside down with the one-way blade slot on the print bed.
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
A disposable blade disposal box. Print > Fill with blades > Throw away. This is an extended re-design of zapta 's Customizable X-Acto blade disposal bank (Thingiverse) . 1mm thin walls: sufficiently stable and secure, no unnecessary waste…
Holds plenty of discarded blades and snaps shut when you're ready to discard it
A stand for holding disposable razors. The included g-code is for PETG, but this can be printed in other materials too.
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for PETGSource material: PET
A small box to dispose of old XACTO blades. The slot is large enough to fit #11 and #2 blades. The lid is designed to be semi-permanently snapped on, but it isn't impossible to remove in case the user wants to reuse an old blade.…
What-a-Load disposal bin from videogame Viscera Clenaup Detail. Print instructions Optimized for both single extruder printers (and quite some precise glueing afterwards) and dual extruder printers. STLs labled MMU are for the dual…
Box for disposable razor gillette venus 3
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
split the model into two separate files, printing the top upside down reduces support material.
Pretty simple you placed used razor blade in through the side slot. Once full you throw the who thing away. Do not attempt to take out the blades. No supports needed the slight string from the top helps hold the blades in place.
The filter is large enough to let food go through but prevent large objects to get down to garbage disposal shredder. No supports needed, PLA is just fine.
Print approx. €0.88–€1.07 excl. taxPreliminary estimate for one variant
A while ago I designed an X-Acto knife disposal bin , but I wanted one that would fit in my gridfinity setup in my desk. So I designed this compact container that will protect you, and others, from old X-Acto knife blades. This model fits…
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
Background: The company InSinkErator is known for its kitchen garbage disposal line of products. They sell product contains on of two types of on/off switches; a wall switch & a magnetic drain cap switch. This model replaces the magnetic…
During COVID pandemic many places have 2 pen holders, one with unused (disinfected) pens and one for the used ones. Since I am usually distracted or to lazy to look for the right holder I intuitively grab a pen from the used pens holder…
I wanted to print a razor disposal box, but my wife would reject all the model i found on the internet. This is solution to that problem. Simple design that will hold years worth of used razor blades and is presentable enough to pass the…
This is to make disposable pots from news paper to start a seed in. I have included the Fusion360 files for you to adjust the sizes etc. Print instructions Category: Sport & Outdoors Print Settings Printer Brand: Prusa Printer: i3 MK3…
Print approx. €3.78–€4.61 excl. taxPreliminary estimate for one variant
Please consider leaving a review (with picture of your print), or a like. This really motivates me to keep uploading my models :) For the parametric file visit: Razor Blade Dispender AND Disposal (parametric) - Free 3D Print Model -…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Simple little lid designed in tinkercad to snap onto the disposable sauce cups.. Can be used for small item storage. Category: Containers
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Quick Cord protector to prevent power cord chaffing on Ace Hardware Model 2000 garbage disposal. This may fit other things, but no guarantees. Note: This is NOT UL, ETL, NETL, ISO, etc. listed. Some particulars: Cord: 3 strand 16 gauge…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
This mini mixing pad is designed for fast, mess-free glue and epoxy work. It features a built-in snap-off mixer and a smooth, disposable surface ideal for small repairs, woodworking, crafts, and general workshop use. Prints flat, no…
They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…
This is a funnel designed to work perfectly with Resin Filters from 3DMaterials (https://www.3dmaterials.com/sub/resins.php?ptype=view&prdcode=2109150011&catcode=10000000&page=1&catcode=10000000&searchopt=&searchkey= ) print with no…
Single Piece - No lid to accidentally come open Secure - internal geometry makes it nearly impossible for blades to fall back out. Space saving - 45x45mm footprint Tall - Holds larger blades like “window scraping” blades IMPORTANT Print…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
A 3D printable blade disposal bin, suitable for any razor blades up to the size of a double edge safety razor . It is incredibly irresponsible to throw razors, or blades of any kind for that matter, into the normal bin, and therefore it…
This disposable paint pot and holder is designed as a low-filament, practical workshop consumable for glue, paint, epoxy, finishes, or general messy jobs. The system consists of a thin-walled disposable cup and a reusable holder that…
A basic wall mounted disposable glove dispenser. Should hold most 100 & 150 count disposable glove boxes. Mounts to the wall with three screws and there is a drill template PDF for locating the holes. Be sure to print the template at 100%…
Five case designs to fit typical (11.75 x 23.75 x 67mm) disposable lighters. Model 1 - plain Model 2 - small raised dots Model 3 - small round holes Model 4 - large round holes Model 5 - large raised dots Printed in PLA. The models with…
Designed to hold used double edge safety razor blades. Angled entry to reduce chances of blades coming out. Print with the top (where the blades go in) on the build plate. Should be able to be printed without supports.
Simple container for snap-off blades. It workes with up to 18 mm blades. Maybe 22mm will work too but since I don't have blades that are wider than 18 mm I can't confirm this. The Slot is 27mm wide. STL: There is a small and a big case…
Tossing used blades in the trash is really bad. Tossing them in this box, and then in the trash is much less bad. NOTE: The razor blade silhouette on top is a separate solid body within the mesh of the box, you can select it in the…
Description from Thingiverse. Original creator link: ChTuna These are simple one-time use disposable (Tamper) locks. They are designed to show damage if they have been removed. Version 1 is less visible for tampering as the end is sealed…
Production Process and Photography : https://cuckoolander.tistory.com/22 Video sample : https://youtube.com/shorts/DStb9b42mRo?feature=share
A friend of mine asked me to create a simple holder for disposable vapes like Elfbar. To keep it compatible with brands i maybe don't know i left some space in diameter. Design keeps the mouthpiece far away from the actual vent to prevent…
My take on a 2x1 Gridfinity bin for disposing of utility and craft knife blades. Uses roughly half the filament vs some other designs. Friction fit for 6x2mm magnets. Parametric Fusion file to tweak the magnet holes as needed. Skipping…
I was tired of trying to find safe ways to dispose of my safety razor blades, so i designed this small bin to hold them. This case can hold dozens of used safety razor blades until they are ready to be disposed of safely. Though it was…
Printed with no supports. PLA.
Here's a holder for the disposable nitrile gloves I use in the workshop. This print just fits on my Prusa I3 Mk3. It's designed to attach with 4G screws. The internal dimensions of the the holder for the glove boxes is 61.5mm deep x 239mm…
I adapted the Diameter of the Adapter as well as the Flange to fit Fuji X-Mount Camera. Please visit @volzotan_217694 original Design for detailed instructions. Use the Fusion File to adapt the focal length. The Images I uploaded are jpgs…
As the title suggests this is a remix of the disposable plastic lock, I made it bigger, thicker and stronger, then removed the hole through it so it can't pass throug itsellf. Enjoy! (ignore my extrusion issues in the pics) In the last…
I was always driven crazy by how fast the precision razors dull out after a single use, so I designed a razor with replaceable blades to solve this problem. I mainly use these to line up my mustache and the cheek line of my beard, but…
There are cartridge holders out there that you can buy for pennies but if you need one and don't have one on hand this might help you out. Obviously, if you tattoo people these should not be ever reused and I guess they should be…
Hello, Here i present a Safety Razer Disposal bin, keeping it simple and elegant. Trying to build a nice library of cool and functional opbjects! *Prints without support! (must be printed without support) * Bottom is preppared fot multi…
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
This is a cup dispenser intended to hang on the wall above my wife's vanity in the bathroom. It's modeled to fit the 3oz. plastic cups from Walmart, but I'm sure it could be easily adjusted to fit others. I included a test piece that…
A strainer to prevent objects from going into the garbage disposal where they might do damage. Has 7.5mm (about 9/32") holes to allow water to enter drain. Also has an ergonomic center post for removal. Total diameter is 84.5mm (just…
Easy print, no supports, default 0.2 settings are dandy. Print with the opening facing down. Quick print, uses little material while being sturdy enough to store old blades. Internal shape keeps the blades from twisting around and getting…
Simplify your filament change process with this practical solution for handling purge waste. Thanks to a compact 20x6x2 mm magnet, the purge holder can be easily and temporarily attached to the LED bar during filament swaps. Once the…
I saw a YouTube video of people using the lens from a disposable camera and combining it with their camera body cap to make a new lens. I decided to 3D print one instead. After four iterations, I got the right thickness to work with the…
OVERVIEW This series of funnels is designed specifically with single use, or single material use in mind. The word ‘disposable’ does not conjure up positive thoughts in this day and age, however the intent is that they can be used for a…
A slightly modified version of the disposable camera lens to Sony E-mount adapter with improved tolerance and sizing of the lens holder, preventing the lens from moving around and not being in line with the sensor.
A model of the U.S. Navy Explosive Ordnance Disposal (EOD) insignia. A simplified version with reduced detail is included and recommended if scaling the model down to print. Photograph printed in Overture Silk PLA.
Print as two separate parts. The lid can be printed upside down so you don't need supports. then glue them together (I used CA glue). There are keystones and registers to help with alignment when gluing. They will not hold the lid on…
Wall Mount Box 7cm or 5cm Disposable Gloves. The second version has a hole in the front for easy installation. Soporte para caja de guantes desechables 7cm o 5 cm. La segunda versión tiene un agujero en el frente para una fácil instalación.
Take apart the disposable bags and turn them into re-useable bags! Parts are compatible/interchangeable with the original Easy valve kit! Print it with a good amount of infill for strength, I did 90%. I used support for the insert. Do not…
Hang a disposable gloves box using the Ryobi Link storage system. Printed at .30mm without supports using OVERTURE Grass Green PETG. Portions of the cleat remixed from SemaphoreSlim 's Cleat for Ryobi Link .
Since those crappy cardboard disposable glove dispensers always seem to be destroyed by the time I get them - I made this parametric dispenser with a snap-on lid. I used 3 walls with a 15% infill. Pictured is PolyLite Pro Gray PLA. I'm…
This project repurposes lenses from disposable cameras, which often end up in landfills or are recycled only as plastic. By placing these lenses into a 3D-print photographers or videographers can achieve the unique aesthetic of disposable…
The box is designed to be compatible with the gridfinity system by Zack Freedman, for more information, please refer to https://gridfinity.xyz Razor blade: https://freesvg.org/double-edged-razor-blade-silhouette
I saw RobC's model for his Disposable Gloves mount for Ryobi Link, but unfortunately my box of disposable gloves didn't fit. I made a new design from scratch, inspired by his, to hold my Harbor Freight HARDY brand gloves (which come in a…
I wasn't satisfied with many of the safety razor disposal banks on here. So I made my own. Mainly I thought that most of the boxes are too big, since a hundred blades will take years to get through and fits in the space of a couple dozen…
General: This is a box to dispose x-acto and small cutter blades. Box size is 30x30x50mm, blade opening is 15x1mm. Inside there is a funnel around the opening so the blades will never be able to come out. Printing: Box: - Box is best…
Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…
Ideal to go shopping in the store and have enough spare gloves during these days of quarantine. It is printed in two parts and a cardboard tube of toilet paper is reused. The first part is the container/dispenser structure and the second…
This is a credit card sized tray for mixing 2 part epoxy. It includes an integral tear-off mixing stick that conviently fits bak on the tray for storage after its torn away, just incase you want to reuse the tray. Ive also included a…
This is just a simple trash bin designed to fit right next to the printing plate of an Ender 3 S1 printer, that way you have a convenient place for all of those inconvenient scraps that come with printing. Saves a lot of time and space,…
I tried on my Ender-3 Neo. It worked well. However, it may not work on other models. No supports needed if the opening faces downwards.
The idea was stolen from Olfa DC-5. I just felt sorry to pay $9. Besides, the DC-5 is too big to put in my pocket, and I have an alternative - in my pocket or a belt mount. Holster style blade disposal container makes easy work of blade…
REMIX of original model. Updated to STL to fix an earlier issue with 3MF corruption! Includes a middle peg to align blades and should contain enough blades for at least a year before properly disposing of them. Marked “RAZORS” on the top…
Using a double-edge razor offers the advantage of a clean shave, but safely disposing of the blades afterward can pose a challenge. This is where this specially designed box comes into play. It features an opening through which you can…
Yet Another Sink Strainer: Keep your measuring spoons and teaspoons from going down the disposal! And keep the bulk of the food from going down -- using the disposal for anything but small scraps is notorious for clogging drain and sewer…
Layer height: 0.2mm Sides: at least 2 infill: 10% for extra stiffness Make sure the first bridge layer goes strait across.
Super easy print! No supports, no brims or raft needed.
This is a tray for safely storing the small lithium-ion rechargeable batteries recovered from disposable vapes, prevent there terminals from wantonly rubbing together in drawers. Shorts across lithium cells, even ones that seem to be…
This blade disposal box (aka sharps box) is made to accept standard utility blades, snap blades, and single edged razor blades. All very useful for doing work out in the shop. The cross cut shows that the blades will not easily fall out.…
I really liked DKDesigns ' model but I felt the holes on the sides were a little too big for half blades like what is used in the Leaf Shave
I wanted to mount second faucet (for filtered water) next to main faucet, without drilling a new hole in the countertop. There was an existing hole for the air switch (button) for the waste disposal, so I figured I would just relocate the…
DESCRIPTION A free-standing stand to hold a safety razor vertically, with all sharp edges covered during storage. Also includes a blade dispenser and an optional blade disposal area. It's designed for safety, convenient access, and…
Blade Disposal Container All in one safety container for your used blades. It comes with two variations; one for AMS system and one standalone non-AMS system. Feel free to color them. Features Sit on the side for knife holder. Profiles…
Throwing out box cutter blades or razor blades? Don't just throw them in your trash or leave them laying around, or you risk accidentally cutting yourself! Print this quick sharps disposal container instead. This is a vase mode print, it…
Disposable Grip designed to fit the CRITICAL TORQUE PEN MACHINE . See article below for sanitization recommendations: https://help.prusa3d.com/article/prusa-face-shield-disinfection_125457 Recommended Print Settings: PETG 0.2mm layers 3…
I did file the two little plastic pieces to have flat surfaces. The viewfinder probably has a field of view of 35mm.
Where I wanted to put my disposable glove box, I did not have much clearance above it in order to drop a box of gloves into the model. A lot of models that are posted here require such clearance. So this model has ‘arms’ that can be…
This holds a smaller disposable gloves box and allows attaching to the wall with 3m strips. Inner dimensions: 77mm x 95mm x 155 Let me know if there's any other sizes or adjustments that would help you! Printed on my Prusa Mini with…
Don't throw hobby knife blades in the trash! This is a 1x1-grid, sealed blade disposal storage box, compatible with Alexandre Chappel's 55mm grid system (see https://www.alch.shop/shop/assortment). This system is older than the popular…
A simple disposable lens mount for a Nikon camera using NIKKOR 1 lens mount. Also included is a STEP file so the end-user can modify it to accommodate various disposable lens types. These lens and mount were tested with a Nikon J1. I…
Hello guys, to solve the problem of constant lack of space and what to do with a “disposable” razor, I created a holder for it. I added holes to prevent water from collecting in the hanger.
Print with the threads on the bed. You may want supports inside of the bottle screw area - doesn't matter though it still works fine if you don't (just a little cleanup to do). Print at 100% infill. I used PETG. A hose washer on top of…
Little Green Army Women : Explosive Ordnance Disposal (EOD) Specialists
Cutter Knife - Blade Disposal
![[ALCH] sharps / blade disposal box (ModuBox)](https://media.printables.com/media/prints/469779/images/3849579_e015dd7a-3ea9-41e1-a76d-c0196c71941b/blade-disposal-1x1.jpeg)
