305 models
My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits…
Remodeled the whole thing and wanted to give everyone the freedom to do adjustments themselves.
The CORE One LED Status Bar lets you see the printer status color, even when the LCD panel isn't above a surface. No post-processing or additional hardware required (press fit) Print Settings -Print it out of either clear PETG or clear…
Tired of people walking in on important meetings? This is a simple, two-part sliding sign that clearly indicates whether a room is available or in use. Just slide the cover to reveal "YES" (in green) or "NO" (in red). The best part? This…
Diffuses the indicator LEDs to make them easy to read. This was adapted to work with the HyperPixel panel. Added a v2 that is thicker and stays mounted better than the first version. Printed in clear PETG but you can use other filaments.
Adjusted my https://www.printables.com/model/641998-mk4-status-bar-for-hyperpixel-4-panel-v3 . Adapted to fit when using MekCreate's HyperPixel 4 panel found here: https://www.printables.com/model/563030-mk4-hyperpixel-4. The original…
Complete remake of my https://www.printables.com/model/595935-mk4-status-bar-for-hyperpixel-4-panel. Adapted to fit when using MekCreate's HyperPixel 4 panel found here: https://www.printables.com/model/563030-mk4-hyperpixel-4. The…
A collection of the most common condition, status and effect rings for your D&D and PF gaming table. Sized to fit around medium bases or hang over larger miniatures. Included step and fusion 360 parametric source files so you can play…
Have you every wanted to snag a bowl from the dishwasher for a big bowl of cereal in the morning, but was unsure if the dishes in the dishwasher were clean? Well, now you can know for certain! Just use this Dishwasher Status Selector…
My printers sit on an ikea Kallax shelf which causes the LCD panel to hang over. Since the new MK4 has an awesome LED Status Bar, I did not want to lose out on the feature. Model printed without supports and misses LED and any chips on…
These Rings fit the standard Figure size like you get them from Heroforge. The case fits 6 Rings each. Printing Instructions Basic Rings Just add a Color Change at 1.2mm. PrusaSlicer ≥2.4.0 will automatically suggest this. Exhaustion Ring…
Alternative tokens to replace the Stunned, Confused, and Tough mini cards used in Marvel Champions LCG. The modes incorporate superhero silhouettes into the design. Token size: 21mm x 21mm x 3mm I printed with a 0.25 nozzle @0.15 layer…
Print your own availability status sign/ indicator for your office! Largest part is 220mm wide (Fits on Ender 3 printbed) Total assembly size: 236 x 66 x 13mm https://www.youtube.com/shorts/jL63w14zDOU You can make your own custom or…
English 3D Print Template: Precision Container for Storing Bambu Lab A1 Mini Nozzles and Discs Introduction: This 3D print template allows you to create a precise container for storing four Bambu Lab A1 Mini nozzles (0.2mm, 0.4mm, 0.6mm,…
I didn't like how hard it was to ring the condition rings from Lynx, so I designed this. The condition rings can be found at Amazon.
Enemy status modes from Metal Gear Solid. Usually seen after hearing this: This colour print can be done without use of an MMU and can be done manually with a filament change at the appropriate layer when slicing in PrusaSlicer - for more…
I didn't like that support was needed for the original storage box so i created a version that can be printed without support. The clip is also not required to be printed in TPU and works with PLA. The condition rings in the pictures are…
Use these numbered rings to help keep track of your bad guys during an epic ttrpg battle. Inside measurement is 26mm and fit perfectly around the base of dnd figures.
Status Dial for One Piece Card Game This file was designed to be print in place, right side up. There is a single empty layer between the top and bottom parts when printing at .2mm layer height. Fusing may occur. After printing, you may…
Status tokens for Pokemon TCG: -Burned -Poisoned -Confused -Asleep -Paralyzed 20mm diameter and 3mm height. Print Settings Printer: JG Aurora A3S Rafts: No Supports: No Resolution: 0.15 Infill: 100% Filament: FrontierFila PLA, ABS, PETG…
Update: Adding a NEW V3 VERSION with a full length that runs along the entire bottom edge of the xLCD cover and guides the light perfectly along its entire length. Adding a NEW V2 VERSION that is shape improved and the diffusion part is…
This Gloomhaven marker organizer holds all status condition markers (including Forgotten Circles “regenerate”) and all scenario relevant tokens, such as number and letter tokens. There's also enough room to store your element tokens. The…
Updates 14. April 2025: added the Information that it also fits on the Prusa XL xLCD. 18. November 2024 : removed the minimally longer diffusor file because the updatet fits well for PLA and PETG. Added the .stl files for the diffuser as…
A very simple non-destructive way of attaching status effect tokens to monster standees. Quick print, likely need ~20 or so. They can be used in multiple ways if space gets tight on the board.
This is a locking counter for 3 stats that go from zero to five. I'm using it for Health, Spirit, and Supply in https://www.ironswornrpg.com/ Design based on Locking Life Counter by heavyweight
Intended to be used with an FDM printer. This was designed to fit all the 3D printable Status tokens that can be found here: https://www.printables.com/model/426438-sw-legion-tokens Fits at least 11 of each token, and 2 command tokens one…
Quick and easy job to replace the awful mini cards for the Tough / Confused / Stunned statuses on Marvel Champions LCG. Print these @0.20 layer height in your favourite colours and make sure you trigger a filament swap at layer 1.80 to…
Game tokens to indicate character keywords for Lorcana. Indicates Rush, Reckless, Can't Quest, Evasive, Freeze, Bodyguard and Ward. Most probably won't need the tokens but they're helpful for beginners. Font Credits to Justin Callaghan
Mobapad M6-HD / M6s joycon grip for the Nintendo Switch. ***New version added to include controller status lights*** If you use a Mobapad for your Nintendo Switch, you know the standard Nintendo Joycon Grip does not work with the Mobapad…
As requested by a Reddit user. The dimensions are 12×12×48 mm.
Statuses, Environmental Tokens, and Enemy Health Counters eat up your space when playing the game; don't look further; I got you covered. Print in standing orientation; no supports are needed. Also, look at my DOS:BG Card Boxes Sleeved…
A simple and fast Solution for everyone, whose Desk or Rack is too small to reflect the RGB Status LED underneath the xLCD on the XL or the MK4. For assembly you can use the original two screws for fixation of the xLCD circuit board.…
There are a lot of miniature base's and health/hit trackers out there but nothing that had everything I was looking for, so I set out to make my own from ground up to check all the boxes that were must haves for me. I made these mainly…
LED Printer Status Beacon Light Printing Instructions light_diffusor.stl Print in vase mode. White or clear Filament should work. LED_clamp.stl: optional. Only needed, if the LED-Strips you use have no adhesive on them, or if the strips…
Original Prusa CORE ONE and CORE ONE L xLCD Status LED Diffuser (xLCD Type A and B) News 11. August 2026: Thanks to the user ProtaDec, my attention was drawn to the following finding. The description was adjusted accordingly. version R1…
Magnetic tags to track various conditions or statuses on initiative trackers atop a DM screen. I made my own initiative trackers for my home game from cheap craft wood, and I embedded a small magnet into the top edge. My plan was to be…
Scuba tank dust cap with indication whether the tank is full or empty. Just put the cap on the way you need it to be, green in front after filling the tank and red in front after a dive. The cap has a recessed hole at both sides to make…
Designed a simple indicator for the dishwasher. Uses (4) 16mmx2mm magnets or sticky pads to adhere to the dishwasher.
Simple slider to show if the dishwasher is lean/dirty/washing.
What it says on the label. Markers for Horus Heresy 3rd Edition. Designed for resin printers.
I made this light so colleagues see if I'm on the phone or available. The color changes automatically regarding to your skype status. You'll need some WB2812 LED strips an arduino nano USB cable some wires The software which sends the…
3 decks holder for Mini USA size cards. For Marvel Champions LCG Status cards Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max Rafts: No Supports: No Resolution: 0,2 Filament: Basicfil PLA Red Category: Toy & Game…
This 3D printed model is a storage box designed specifically for Pokémon Trading Card Game (TCG) accessories. It neatly holds damage counters, status tokens, and coins, making it an essential organizer for Pokémon players. The box is…
Wanted a simple yet easily identifiable office status without having to get within 5 feet to read. And thought of the doctors office where they have colored flags to give patient room status. Put them together and you have this!!…
This is a collection of battery and battery charger holders for the Black and Decker 20V MAX Batteries (both regular size and extended 5.0Ah batteries). These differ from the original models here (…
The original design allows a lot of light bleed on lighter color shrouds. This design moves the LED back and adds a blocker over the diffuser to completely eliminate light bleed. An .stp file of the assembly is included so you can change…
A health/spirit/supply counter for Ironsworn , remixed to allow colored numerals using filament swapping. Print instructions I printed the number rings like this:…
Works with the Status LED Diffuser https://www.printables.com/model/1343257-original-prusa-core-one-xlcd-status-led-diffuser-x
Printed using Clear PETG, no post-processing or additional hardware required (press fit)
This shield token for gloomhaven is a remix of "Shield token for Gloomhaven by guyfox". The thickness is decreased to fit into the fantastic status token holder from Bundus at printables gloomhaven-frosthaven-status-token-holder With the…
My fat fingers are not as dexterous as my 6 year old daughter's so I have decided to remix status tokens that are a little more friendly to my non-yoga practicing fingers. Lesson from a newb: PRIME stuff before painting. it will look way…
Optimized for version for easier printing and better rotation with help of center pin. Mine works great even without the baseplate. Just hotglue the shield to the surface of washer.
Toilette Status Slider Das Teil besteht aus 3 Teilen: main part moving part side Der moving part muss in dem main part geschoben werden bevor der side part an den main part geklebt wird. Habe auch die f3d Datei hochgeladen, falls man den…
If you liked, don't forgot to drop a like! Second edition of the office wheel status indicator. This is an improvement from my first model as it includes a locking mechanism , better fitting pieces , smoother rotation , NO DUCT TAPE OR…
Removed the USB and calibration pin pockets. Everything else is just like the original file.
After coming across Seth's design, I really liked it - but I wanted to use it for something else rather than a dishwasher. So, I took the text wheel and removed the text to allow myself to print other things upon it. Print instructions…
I'm planning on mounting a bunch of battery packs for power tools on the wall above my workbenches for easy access but this holder would also work under an horizontal surface such as the underside of a workbench or shelf… I have several…
All markers needed to mark a creature's state in DnD
I had printed the @perform3d version on my Prusa MK4 and XL and I really loved the very bright rendering. I then changed my MK4 to MK4S and printed the version of @hachleitner_1769169 which fits perfectly on the MK4S, but I found that the…
Beschreibung (Deutsch) Dieser vollautomatisierte 100mm Absperrschieber ist eine High-End-Lösung für Werkstatt-Absaugsysteme. Er kombiniert das bewährte Prinzip des Truncated Ball Valve mit einer stabilen Servo-Direktmontage und moderner…
Some marker to keep track of your unit's status. Was the unit already activated? Are my units frightened or even held down? These markers fit to Grimdark Future ( https://www.onepagerules.com/games/grimdark-future ) and should cover all…
What is this I always found the TOUGH/CONFUSED/STUNNED cards a little too big, taking up too much tablespace or covering parts of character cards. Instead, I wanted something smaller. So I designed these counters as replacements. I place…
Description The CORE One LED Status Bar lets you see the printer status color, even when the LCD panel isn't above a surface. This remixed version is longer and fits under the whole display. It also has a bigger contact area with the…
A DXF for adding the status bar cutout to footpads intended for use with the Funwheel controller box. Align with the bolt holes for correct placement.
Was given some input on how to make a better version that also stacks to keep track of elemental types as well as elemental sufferings. They stack to save space on the board. Uploaded separate files for painted and non-painted miniatures.…
Dear all, please see the instructions at https://www.verdrahtet.info/2019/01/04/homematic-statusanzeige-selbst-genaut/ Thanks to Stefan for this project. There will be some options: with switch / without switch (already here) version with…
About the Model These dials/sliders help you remember the following info about your hive, for the next time you come check on it. I've also included a blank status wheel for you to remix and add whatever text you'd like (even just print…
A coworker commissioned me to make tracking tokens for his DnD sessions. It has a number on one side, a skull on the other, and can be accessorized with a ring to indicate status. I included the skull part in case you want to do…
better cutout to see the battery status indicator. (bigger than on the image, did not print out the latest version yet)
Print Prusamanent Galaxy Black 0,2mm structural infil 20% pattern gyroid bridges fan speed 70% Be careful with the cables when assembling. I did the disassembly and assembly with the printer on its side, I did not remove the metal display…
A bookmark/hook designed to fit over a DM Screen and assist in tracking initiative and status effects. The face of the tracker has an open spot to place nametags/labels for players and enemies as well as a blank space underneath for minor…
Simple easy to FDM print status effect rings for your Frostgrave and Stargrave games.
I took the original design (albeit the slim design version) and have remixed my own version in TinkerCAD. To be clear, I actually started from scratch and created a brand new model, but used the slim version of this model as my basis. For…
These status condition rings are stackable and fit 1 inch base TTRPG minis. A permanent marker can be used to trace the tops of the embossed letters for contrast and can be printed in different colours to colour code your adventure. Rings…
I remixed the original model by jruutiai from Thingiverse: Made it slightly narrower and the tabs wider to better stay on my batteries. Added status indicator for E mpty or F ull. The battery has a little triangle (arrow) on top. Point…
I created status condition rings for the Innate Sorcery sorcerer skill, the Paladin’s Vow of Enmity , and the new mastery properties: Vex , Sap , and Slow (10 ft.) . As a DM, I found it difficult to keep track of these effects during…
Cog Tokens – WH40k 11th Edition Battlefield Status Set Double-sided gear-shaped status tokens for WH40k 11th Edition. Covers all key unit states including the new Hidden mechanic. --- About I created a set of double-sided tokens to track…
Since I am not using microfit connector there was space for a led in the gearbox. No support needed. I have added a removable support. I used a NeoPixel 5050RGBW in the assembly.
These are a few of the statuses we're currently using in our campaign. I've included the fusion file (parameterized) for those who want/need to adjust the text. Simply edit the sketch, then edit the text. I print at .2 layer height, and…
The MK4(S) LED Status Bar lets you see the printer status color, even when the LCD panel isn't above a surface. The diffuser of the original model was too small for me, as it wasn't visible enough and was hard to remove from the screen.…
Please create your own rings with any text you'd like to have on them! I made this OpenSCAD file with the help of ChatGPT.Please create your own rings with any text you'd like to have on them! I made this OpenSCAD file with the help of…
Ein Ring sie zu knechten… Moment mal, falsches Universum :) Hallo zusammen, da wir in unserer DnD Runde immer öfter das Problem hatten, die Initiative zu tracken, vor allem mit vielen Monstern, habe ich diese Ringe erstellt. Sie sind…
Overview GlowBar is an original full-width LED Status Bar that turns the printer’s Status LEDs into a clean, continuous band of color. GlowBar was developed after trying existing Status Bar models and remixes that did not meet my…
i wanted something simple to show status of my printer on first look. works best with neopixel led strip, i recommend 60led/m or higher. (if you decide to go for normal led strip you lose the ability to display print progress and so on.)…
This uses an optional lithium polymer battery. These are fragile so handle it with care. If it's punctured, it will catch fire. Use at your own risk. Do not buy a battery without a protection board. The converter does not have any. Since…
This is a status indicator (busy light) for your office or home office to show your colleagues, co-workers, boss, wife, children or cat if you are free to talk or do not want to be disturbed. Simply turn the thing over to swap the color.…
Bambu Lab LED Progress Bar (DIY version using Home Assistant + ESP32 + WLED or MQTT) There’s a ready-to-use progress bar kit available from BIQU if you prefer something plug-and-play: BIQU Panda Status LED Light Bar Kit H2D-Style I wanted…
A selection of 20mm round status markers/tokens for your tabletop gaming needs. All come in supported and unsupported versions. nonPareil institute is committed to building better futures for adults with autism through technical and…
I made this slider to keep track of the status of the dishes inside of our dishwasher (green - clean | red - dirty). The model consists of 6 pieces and is assembled with magnets. There are 12 magnets in total. The colored squres are…
Die Statusanzeige ist eine drehbare Scheibe, die magnetisch auf einer Basisplatte angeordnet ist. Die Basisplatte wird an die Front mit (lösbaren) Klebestreifen aufgeklebt. Das Modell ist für Magnete mit Abmessungen von 12 x 2 mm…
Recreated from Mat's awesome original set. https://www.printables.com/model/126117-dungeons-and-dragons-status-effect-markers I needed to represent Haste and Emboldening Bond, plus the “Whatever” ring for edges cases where you don't have…
Clips to show orbital layer for Dropfleet Commander. Print in different colors. I would suggest Black for No spike, Red for Major, Yellow for Minor, and Blue for Silent Running. Clip can be moved up and down the stand to signify orbital…
What is this? I primarily work from home, and my kids love nothing more than stomping down the stairs to interrupt me in the middle of meetings. I built this LED sign I could hang outside my office door to let my kids know if I'm busy or…
I stumbled upon this great octoprint plugin: https://plugins.octoprint.org/plugins/wled/ Since I use WLED everywhere I designed this little indicator Light. I used these WS2812B LEDs with inner diameter 36mm and outer diameter 50mm:…
Adding the german translation to Mat's awesome original set. https://www.printables.com/model/126117-dungeons-and-dragons-status-effect-markers Mat recommended a filament change at 1.2mm. For more Printing advices, have look at his…
Building 10" rack home server and needs some neat mounts for extra hard drive space, this will surely help you. Includes hole in the face for display to show HDD status so you know exactly what is happening with a quick glimpse. USB-C /…
This is a 4 piece model designed to snap together and be attached to a 2020 extrusion, it is 300mm long, but can be scaled up or down. It uses a 144 LED/Meter argb strip to have high pixel density, and plugs right into your mainboards LED…
It is useful to be able to see at a glance if the IR filament sensor detects filament. You can get this information by scrolling through the LCD menus, but this mod gives instant visual feedback. Their are some other similar mods…
Since you all now have your scrap metal army, you'd definitely need some status markers for that, too! Added some different variants for the wavered one, I personally think the broken shield looks better, but also the arrow down could be…
A cap for your XT30 batteries, that indicates whether it's charged or not! I printed this in PETG on my MK4S with a 0.4 nozzle and it fits quite snugly, any other material should be fine, but PLA might creep, I haven't tested it. You can…
