269 models
printed the Stem in simple black PLA printed three closed roses: One in Pearly white PLA and two in translucent white PLA I used Green Stuff to mold the leaves and used it to glue the Flowers to the Stems The leaves on…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This is a model of a medical linear accelerator based on the “Halcyon” Unit marketed by Varian Medical Systems (Palo Alto, California). Medical linear accelerators are large and highly sophisticated medical devices that emit focused beams…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant
This storage system for big small pliers or other tools has space for up to 4 parts and its an accesory for "Brunos - Tool Storage System)- It fits with his holders easyly in the wallmounted modules. I have made also a holder for small…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Gun inspired by Cyberpunk 2077 poster and real guns (Colt, Berett, CZ 75 Shadow Line). There is enough space inside for electronics, to add red and blue LEDs to the right side. Plus has movable parts, where rubber bands need to be added,…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Introduction: ReFill PLA is manufactured for usage with re-usable master spools. Print your own spool. This filament reduces your carbon footprint significantly as packaging waste is reduced to an absolute minimum. Find out more about…
Flower with stems 10, 15 and 20 cms - Fleur avec tiges de longueur 10, 15 et 20 cms. Prints better at 0.16 layer height. If you download it, please like. See also :…
This model is a bidirectional cable chain based upon the igus Triflex series energy chain. These are used to wire up rotational systems where the cable cannot be routed through the center of the axis of rotation. An example use case would…
To demonstrate how simple and multiple chain hoist/pulley block work we need to have one or more pulleys. A functional single or multiple pulley is the result of this project. It can demonstrate the transmission of forces and weights in…
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
Flower with stems 10, 15 and 20 cms - Fleur avec tiges de longueur 10, 15 et 20 cms. Prints better at 0.16 layer height. If you download it, think about a like. See also :…
A convenient Top filament guide for printer with direct drive system: The ball can rotate in any direction, this prevents the filament from bending, the hole is designed for PTFE tube insertion (8mm), for better sliding. Print Settings…
Although I've been very happy with my original snap in adapter (https://www.printables.com/model/297396-ssd-to-hdd-adapter), it will not work for slot mount or any system with a stationary SATA connector. This adapter was specifically…
A jam proof pulley for antenna or other projects. The hing mount and the pulley mount have a matching diamond interlock that allows the pulley to be mounted in one of two orientations, depending on your needs. There are also mast top…
I really liked the base model, but found that the supplied horizontal stems left a bit of a visual gap in the center of the pot. I generated some new, more vertical stems in Freecad to add some variety. They have a small arm sticking out…
CHECK THE NEW ONE ON MY PROFILE https://www.printables.com/model/1134797-v20-dart-hub-stand-display-holder A simple to print solid darts stand holder /display. With space to hold your favourite stems and flights for that set. The top part…
Company logo of the fictional company "Cyberdyne Systems". Known from the Terminator movies. For multi-color printing, the filament needs to be changed after each color.
The Distorted Ellipsoidal Saddle (DES) profile is a sculpted Cherry MX keycap profile with a unique look and feel. Designed by Pseudoku and released in 2019, the DES profile is lower profile (shorter) while still using Cherry MX stems,…
XDA Keycaps for Dust-Proof Stems (Remix) This is a 3D printable keycap set in the XDA profile, specifically designed for keyboards with dust-proof stems. Key Features: Compatible with dust-proof stems Based on the XDA profile for uniform…
Bought my first PSP 15 years ago and still use it today, but the batteries are obviously not working anymore. There are a few tutorials showing how to mod a bigger LiPo pouch into a PSP by removing the UMD drive, but I had plenty of 18650…
Mount your Neptune Systems Trident & Trident NP to a vertical surface. Usually the vertical panel of an aquarium stand or a wall. There are 4 variants and 1 optional part. Only print out the piece(s) for the variant you want. Two piece…
Mushies Footpads for Onewheel XR - VOW systems. All credits to VOW systems
Fine details require SLA printer or 0.2mm FDM nozzle if you're good.
Can work with 21700 18s2p configuration Lid must be CNC'ed
Basic cover for A5 sized disc-binding systems. You can use your favourite modeling tool to emboss something into (or through) the cover for specific designs. This is just a basic core template.
Here it is! Filament Darts. Try recycling filament for the point. Set up a cardboard box for a target and you're in business. Also works with those hole-filled plastic targets everybody seems to have. Update: New models ! Significantly…
Here is a Tilt-Shift Adapter that can be configured to attach Canon EF or FD lenses to an EOS-M camera. Old FD lenses will allow to select the f-stop. EF lenses will have wide open aperture and the adapter allows for detailed control of…
These parts were designed for use on an iDoo 12 desktop hydroponic system, but should work with any systems using 30mm/1.18" holes. Algae Blockers (no more stickers) These reusable algae blockers replace the single-use stickers that are…
The modell is from scratch It does not fit the System saddle but the wagon can be pulled with. Realistic shape NEEDS to be CLUued together. the Only Plugs in at horizontal position. the parts are printed in PLA with 0,3mm Layerhight and…
Skynet - Cyberdyne Systems Corporation, License Plate Frame, Terminator Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Remix of Yanev's parametric toolbox to store consumables for my crossfire pro plasma cnc. The consumables this is designed to hold are for the Razorweld 45 or Hypertherm Powermax45. Part numbers are listed below I resized his box to fit…
Your printer might become self-aware. Use at you own risk.
UPDATE : If you remove the printhead cover, you can keep the hotend cables connected and boot the printer to use motorized motion of axes. IMPORTANT : Do not remove the hotend from printhead before homing. After homing you can remove the…
This is a remix of a remix. The CR920 Fits the Glock 43 stand, so I started there. This is also my first remix, so it may be total trash. Hopefully it works well for someone else. It worked for me :-). Original -…
Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker. MUST be printed with ABS…
After buying my Trident I wanted a way to mount it in my very space limited Red Sea E-170 cabinet. This is what I came up with. The wedges are for 8mm glass. If you need a different size, please feel free to remix it as needed.…
A case for a digital hygrometer for replacement of the "Passive Humidity Indicator Paper" in the Chitu Systems filament dryer. Suitable for the widely available and cheap hygrometers, e.g. at AliExpress . Parts: Front housing (with…
Here are a couple pumpkin stems for your fall crafting. I designed these when I couldn't find the right size corks or cinnamon sticks. Easily hot glued to yarn or fabric pumpkins. Support: no Infill: 10% Can be resized to your liking
This 3D printable Radiator Bleeding Tool is a compact and reliable key designed to release trapped air from radiators, ensuring optimal heating efficiency and comfort in your home. The model is engineered with durability in mind – perfect…
This is a 3D printed torch shield for the Langmuir Systems Crossfire CNC plasma cutter that uses a Hypertherm machine torch. It includes a holder for 2 inexpensive line lasers that will aid in material positioning under the torch. The…
Spiral support for papyrus/cyperus plants or plants with long stems to be put on 8mm stick, turn the spiral to put the stems Spirale de soutien aux plantes papyrus ou plantes avec des longues tiges a mettre sur baton de 8mm, tourner la…
This custom-designed end cap fits perfectly on the PTFE tube included with Polymaker's PolyDryer kit. Keep moisture out and protect your dried filament with this easy-to-print, functional plug. The cap features a precise fit with an inner…
If you're a Maladum player, you know that the game is amazing, but it's also got a LOT of terrain pieces, especially once you buy all the expansions alongside a few of Battle System's other terrain kits. So, to help rectify this chaotic…
This model is compatible with the lego system.
Chitu Systems Resin 3D Printer Mini Heater-Versatile Temperature Control Heater Support. You need 4 M3x4 hot inserts and 4 M3x10 screws. First pass the cable through the two pieces, fix everything to the cover and finally position the…
This adapter is specifically designed to connect pipes with different diameters in exhaust and ventilation systems. It ensures a tight and secure fit, providing efficient airflow while being easy to install. The sturdy design makes it…
Base, inverted handle grip and grip to lock in place
Remixed these keycaps to fit my totem that uses choc v2 switches.
I'm a big fan of the Bontrager Blendr system for mounting things to the compatible stems. You can mount a Garmin and a headlight onto your bike without a single rubber band or screw-on mount wrapped around your handlebars, resulting in a…
Design for a friction fit cover for the Blue Sea Systems 250A Bus Bar Cover. Can most likely fit other bus bars and terminal blocks as well. Covers 5/16' studs…
One component on each side. Used to push the building plate during circulation. We use PLA+ for printing. This model needs to be supported by the tree structure.
The ball can rotate in any direction, this prevents the filament from bending, the hole is designed for PTFE tube insertion (8mm), for better sliding. Remixed because of using it on CR-6 SE. Thanks to MUCC’O. Supports: Yes Resolution:…
I really like the font and texture in IBM Model M keyboards, but needed a much smaller keyboard for my home office. I had saved a set of caps from a trashed Model M and decided to print some adapters to use them on my Keychron K6. All…
Recommend .1mm layer height for accurate threads. PETG or ASA for outdoor durability. Icons are optional. Users have reported needing to scale by up to 1% for proper fit. Update 2025/01/02: Added a longer variant for vehicles with TPMS…
Neptune System Multicolor Logo print - Apex Controllers for Aquariums Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: any PLA, ABS & PETG - Notes:…
This is the hook for the building plate. The base plate needs to be drilled manually and then installed with two M3 screws. Note: You can screw the screws into the holes first, then unscrew them and install the building plate. We use PLA+…
*** You are doing me a big favor by clicking the Like button :-) *** 45 degrees holder for Ajax GlassProtect
Remix of the 5 spool adapter to adjust the angle and distance from the spool.
Corner Brackets for Profile Systems Enhance your projects with our versatile 3D-printable corner brackets, designed to fit a wide range of aluminum profile systems. These brackets are available in four sizes: 30mm x 30mm 35mm x 35mm 40mm…
Laser adapter for a Langmuir Systems Crossfire Pro CNC plasma table. Includes Ruggeduino laser controller schematic. Controller used is an industrial Arduino UNO from https://www.rugged-circuits.com/ The enclosure I used:…
This is a customizable model that can be used to create handles that provide an improved grip for handheld retro gaming systems. Instructions for customizing the model are in the comments within the SCAD file. I have also included STL…
A simple lid to plug empty 2inch Netcup holes in a Hydroponic System to prevent algae growth. Can be printed in any non-transparent material.
Pistol-style handle to use the 3D Systems Sense 3d Scanner family with Skanect Software, which assumes a different orientation. I use the OpenNI2 Drivers to use this scanner with Skanect. (The 3D System Sense Scanner is just the Intel…
Filament spool V2.0 for 3D printingmaterials. Ideal for dehumidifying through large side openings. Specially shaped holes that prevent filament from unwinding on its own. Special openings for filament are made in such a way that the…
Stand for Arizer Stems with space for small parts I was not happy with the normal print file, so i decided to print this thing in spiral vase mode. You can use the Spiralvase Mode Modell / use the attached .3mf file for print instructions…
Printable Rod Stoppers that use M3x5x4 heatset inserts and a 20mm M3 screw.
My second attempt at re-creating a track handle from the Old Days.
Overview Bring a touch of the warehouse to your workshop or office! This Gridfinity Pallet is a purely aesthetic addition designed to tie your desk organization together. I originally designed this to make my desk-sized pallet racks look…
EDIT: few mounth since it's in the rack, few thousands km, lot of gigs and still as good as new (thanks to PETG). I just replaced the central 3d piece with a strip of stainless steel collar. It goes through the whole length of the 19"…
The pegs are tested on the IDOO IG302 but should fit similar systems. The pegs fit into the holes for plant labels/tags. They should help reduce light bleed into the reservoir and reduce algae growth in the nutrient solution. Single pegs…
Description: Introducing an innovative solution for pet lovers and organizers alike! These 3D-printed connectors are designed to enhance the flexibility of the Relaxdays shelving system. Originally crafted for a rabbit enclosure, these…
I printed this in PETG using the .15mm STRUCTURAL profile. This should provide cleaner threads for the PTFE fittings. The dovetail joins have .1 mm tolerance, which worked well for my machine.
For use with Ambrosia Systems Nightrider: https://www.ambrosiasys.com/our-products/blucon/ This arm band uses the elastic and velcro bands from the Scosche Rhythm+ and Rhythm24. You can purchase the replacement arm bands for under $20US…
My home as several Mortise-Mount Pilaster style built-in bookshelves and I thought it might be fun to try to design the support clips as my first TinkerCAD project. The model is based on these 239 Series Steel Shelf Clips manufactured by…
Simple mount to reuse your existing adapters for antennas in standard d-type mounting situations, e.g when mounting two transmitters with LD Systems U500 RK 2 or similar. The opening has some room and due to the plastic the adapter might…
🇺🇸 🇳🇿 🇨🇦 🇦🇺 🇬🇧 Stand for Standard Reverse Osmosis Systems 🇺🇸 🇳🇿 🇨🇦 🇦🇺 🇬🇧 A simple stand to position a reverse osmosis system vertically, saving space without the need for permanent installation. Most systems already include the…
Drilling holes for the A1mini building plate. Place the part under the building plate and align it with the bottom right corner. Then turn them over and drill holes by this part.
Easily strip herbs from stems. 7 stem holes range from 2mm - 5mm in 0.5 mm increments. Ribbed handle for better grip. Print settings can be whatever works well for your printer, not a fussy print.
StemSaver – Plant Stem Support Splint with Tie Holes (4 Sizes) The StemSaver is a reusable stem splint designed to support weak, leaning, or damaged plant stems—perfect for tall indoor plants like Strelitzia , Monstera , or tomatoes. Each…
Praktischer Adapter für gängige Cerealboxen zur Filamentlagerung Dieser Adapter ist speziell für die weit verbreiteten Cerialboxen ausgelegt, die oft zur Aufbewahrung von Filament genutzt werden. Die seitlichen Öffnungen links und rechts…
📦 Ajax Systems Wall Mount Adapters MotionDetect Corner Adapter + MotionCam Outdoor 45° Wall Mount 🧩 Overview This upload contains three custom mount adapters designed for Ajax Systems detectors: 1 MotionDetect Corner Adapter Angled corner…
A zero support wye/tee fitting for 4" duct systems. designed to print without supports! You'll need a brim, though, because there's very little contact area on the build plate. it's 4" OD, so the duct slips over it. I printed in both ASA…
All Spool Solution This board allows you to use filaments from other manufacturers. To use it you will have to mount the adapter on the machine using the two existing bolts, insert your old filament cartridge chip on the provided pen…
These models are sized for the Molicel P42A, so you may have to adjust the tolerance for other cells. The parametric Fusion360 model can be used to make any size of glue guide for any size of cell.
Chitu Systems Hoopat x4 film PFA ACF for Laser laser cut your own release film for your hoopat x4 vat
A little Adapter for 2inch Netcup Hydro-,Aqua-,Aeroponic Systems. It enables the direct use of this Rockwool-holder: https://www.printables.com/model/65737-rockwool-cube-holder for easy growing from seed to finish. I designed that part…
A complete wall organizer for the terrain packs from Battle Systems and Maladum, fits the whole content from Maladum and have space for some other packs. The design was made with the intention of fitting into almost any filament box, for…
I designed this to add a degree of impact protection to my Langmuir Systems XR Plasma Torch Table wireless controller. I used Prusament filament (galaxy black) which I highly recommend. For higher temp stability, try an ASA filament, or…
I had the original holder for my microphone break, so I made a SKADIS-based mount for it. The microphone itself is a Hama 21671, but many other microphones share the same standard. The mount uses the same upper parts (clip, screw and nut)…
What it is: A simple handle with screw holes for easy gripping of your SSD/HDD. Printing Instructions: IMPORTANT: MAKE SURE YOU MEASURE THE THICKNESS OF YOUR SSD/HDD. Two options are provided 7 and 9mm thicknesses. 0.2/0.3mm Layer height…
Update 2026-03-18 Added modified keycap anchor key This is a slight modification of @bassamanotor remix, which is based on the original (see remix list) This prints face down with FDM instead of resin. Made the stems holes 4mm deep to fit…
Original SVG included, as well as Fusion360 files. OM Systems logo can be added to PrusSlicer Part Gallery for easy addition to any print. Hotshoe is a remix of my Panasonic hotshoe, EM1.1 has accessory port that needs covering as well.
Simple desk stand for reagent bottles of Beckman Coulter AU and DxCAU clinical chemistry analyzer systems. It has six positions and is able to hold 60, 30 and 15 ml bottles. 60 ml bottles fit best. 30 and 15 ml have some wiggle but the…
This is an overbuilt jumper wire holder that seeks to contain the mess. All other solutions I was seeing were Gridfinity, but I really wanted a vertical solution. The wires stay put very well and don't jump out, and it's very easy to…
Check out our corresponding Y axis linear rail mounts for the light weight carriage! https://www.printables.com/model/274222-tac-01-bed-leveling-wheel-clips-for-light-weight-m Read more about them on our website…
There is a great open source project by shining-man on github: https://github.com/shining-man/bsc_fw Please support the developer of this project: Paypal: https://www.paypal.me/shiningman11 This is a 200x140x43mm case. I added an…
For electrical tape (or Teflon tape???) spools with a 38mm inner diameter and 20mm width. 3M spools of electrical tape in North America seem to use this diameter (although I do appreciate having smaller reels with more tape….wonder why it…
Please be aware that if you put this on your machine, there is a possibility that the laser print head will hit the rotary. Before trying your design, please make sure this will not happen at your set angle. The rotary tool on my local…
