Counting matching models…
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
This wall mountable holder should fit all batteries from the AP range (100, 200, 300, 300S). There is a single and a double battery design. Since these battery packs are expensive and do not like to be in the cold in the winter, I needed…
A simple line trimmer holder - mine was made for a stihl, but it would suit a bunch of others. I printed mine in a basic orange PLA and it has held for over 6 months with a straight shaft trimmer on it with no dramas.
Single and double holder for the Stihl AS 2 Batteries
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Modeled a simple wall mount to hold the STIHL BGA 57 Leaf blower. Printed in Prusament PETG
Wall mount for chainsaws. Dimensions were specially created for the STIHL 025 model. But should also work for different models. Just check that the height of the bracket fits at a distance of 1.5 cm from the wall. Three 5mm countersunk…
A hanger for Stihl motor head attachments. Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 30% Notes: Printed with 0.4 nozzle and four perimeters in…
Simple print, no supports needed. Screw holes are 10mm for the head and 6mm for the thread. I printed this in PLA at 75% but it probably doesn't need that much infill. I've now added a second STL file that doesn't have the cutaway for the…
Enhance your robot lawn mower’s terrain capabilities with this wheel. Designed to fit both the Stihl RMI 422 and 632 models, it allows you to use the original wheel cap for a seamless upgrade. See the below video for installation…
Ersatzmesser Ersatzklingen Für STIHL FSA45 Polycut 2-2 / Replacement blades for STIHL / Stihl Trimmer Blades
Husqvarna/Stihl Heckenscheere/Motorsäge Wandhalterung.
Tankdeckel für folgende Stihl Motorsägen: MS:020,021,023,024,025,026,034,036,038 Die Dichtung sollte mit einem Weichen TPU hergestellt werden um gut abzudichten. Nutze A70 Shore TPU. Empfohlenes Material ist ABS bzw. ASA um die nötige…
Holder for Still battery : AK10 AK20 ... Wall mount with 2 screws
Stihl Combi Can accessory box to add to your Stihl combi can sides to hold your file and T-wrench for example. With Step file you can design inside of the accessory to your specific need if you want to do so.
Stihl Trimmer Blades Replacement blades for Stihl 4 blade trimmer head. I offset the blade to print without supports. So far, I have only printed these in PLA but I'm sure they would be better in nylon or something more durable. The white…
Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661
Wall mounted holder for Stihl FS-55 trimmer. I've printed with PETG with 25% infill and 6 wall count. Very strong, hold
Prints flat without any supports . You can use it to lay down the perimeter wire for your automatic lawn mower. You can also use it to lay down any cable you want this way. I used it for a 12V wiring for my garden lights. The grass will…
Adaptation of the FS91 mount to fit a FSA 135 on the Wall.
The gas caps on my Stihl power tools are often difficult and painful to open so I designed this small tool to provide extra leverage. It only helps with opening the caps as you don't want to overtighten them. I've been successfully using…
Printed with PETG, nozzle 0.4 mm, 0.2 layer with support
This is a carrier for Stihl AP batteries, it will fit any battery of the AP series. I got fed up of these (very expensive) things sliding around in the back of my car. It both makes them easier to carry as well as protects the batteries…
Akku Holder for Stihl AK Akkus
Flat top to place it on the print bed. The flat printing orientation gives the model significantly more stability.
"AutoCut 2-2" wire spool cover for the Stihl FA 56 trimmer. Saved my gardens day while waiting for a complete wire-spool set. The version without spring openings for the clips is a bit fragile if printed in brittle PETG. Because the print…
Pull Handle for Stihl gas powered engines
Stihl Logo - Chainsaws. Designed using the Stihl logo and additional text in fusion 360. Suggested colours are orange, white and black. Printed using 0.15 layer height 0.00mm to 2.45mm - First layer (base) 2.60mm to 3.50mm - Second layer…
Wall bracket to hang STIHL SH56 Blower. Attached to the wall with 4 screws. Reenforce with 1/4"-20 Thread Size, 2-3/4" Long Button Head Hex Drive Screw 1/4"-20 Thread Size, Hex Nut If you download and/or add this model to your…
This is a long obsoleted choke lever that fits Stihl 015L chainsaw and likely many others. Printed using .3 nozzle and .065 layer height. Make sure your machine is dialed in using a calibration cube to insure the lever will fit. Old part…
Replacement throttle trigger for the Stihl FS40 string trimmer Assembly tips: Use a hack saw to cut the slot for the throttle cable to rest in (see top of trigger in assembled picture) Sanding of the pin may be required to fit into the…
I made this to compress the rings on a Stihl 031 chainsaw. Plan on making more sizes, if you have a piston size to suggest send email to [email protected] and i will make an stl to add to the project. 46mm for O28 woodboss 48mm for…
Printed to mount batteries out of the way and safe. Can be mounted on a wall, or under a shelf. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution: .24 Infill: 15 Filament: 3D…
Stihl Buckle Clip - Quick Release Buckle Clip- Ricambio Fibbia Stihl Designed for quick installation without the need to unstitch or modify the original belt strap. Best for: Quick belt repairs, custom buckle swaps, or reinforcing weak…
Wall Mount or Cover for the (unused) Stihl HSA 26 Blade. Model without screw holes can be used as a cover Wall Mount for HSA 26: https://www.printables.com/de/model/877043-stihl-hsa-26-wall-mount
STIHL HSA 26 – Wall Mount A simple and practical wall mount for the STIHL HSA 26 cordless garden shears . Keep your HSA 26 securely stored, easily accessible, and neatly organized in your garage, workshop, or garden shed. 🖨 Printing…
The blades on my Polycut mowing head kept snapping when hitting small rocks or twigs and I figured I could print some out of TPU. I've tried hitting large rocks on purpose, the only visible damage to the blades was a seperation between…
A battery holder for bringing your batteries indoors during really cold winters. Stihl AK battery holder.
Halterung für 2 Stihl GTA26 Akkus AS2 (28 Wh, 10,8 V ), Öl - Flasche und Ablage für Kette. -------------------------- Holder for 2 Stihl GTA26 batteries AS2 (28 Wh, 10,8 V), oil bottle, and chain storage.
Stihl BGA 57 blower wall mount. Several years ago a found one off another site. I did not like the fit and tried to re-mix it. After fiddling around with it, I decided to create one from scratch. I did this mostly the old school way with…
📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!
top cover for a sthil fsa56 line trimmer needed a replacement after my original tabs broke up so i made this one has a flat top for ease of printing print .2 with supports for tabs
This is a 4mm nut driver for tuning Stihl HL94 carburator. I suggest to print the handle at 20% infill and the rod at 100% by "modify settings for overlaps" / infill 100% inside the support blocker(in Cura). Print Settings Printer Brand:…
Tisknuto je z PETG, šestihran sklíčidla je potřeba do rukojeti narazit nebo lehce naklepat. Vnější rozměry jsou stejné jako u Rukojeť pro sklíčidlo s šestihranem A jak je u mě zvykem, projektový soubor pro Fusion360 je přiložen.
I printed this with a 0.4mm nozzle at 0.2mm layer heights and on a 45* angle as an attempt to maximize the layer cross section for strength. Be advised that you will still need supports if you opt to print it vertically. The materials I…
I didn’t want to buy a full cutting head, and we couldn’t get that part so I modeled it.
A friend got a spare part for his Stihl 024AV chainsaw but the brand cover was missing on the starter box. So I drew one with the brand logo and his initials as inlays. For this upload I skipped his initials so you have only the logo. I…
Small support for the weed eater. Does not take long to print and requires no supports. I have included the step file in case you need to modify for the screw size or else. I printed it in PETG since it will be in my garage during summer…
Dieser Wandhaken wurde speziell für den Stihl BGA 86 Akku-Laubbläser entwickelt (Ich weiß nicht, ob er ggf. auf für andere Stihl Laubbläser geeignet ist). Er erlaubt das Einhängen des Geräts mit der Blaslanze nach oben, so dass das…
Tisknuto je z PETG, šestihran sklíčidla je potřeba do rukojeti narazit nebo lehce naklepat. A jak je u mě zvykem, projektový soubor pro Fusion360 je přiložen.
Includes 2 Parts which are screwed together.
I could not find a mount for a BG-50 gasoline leaf blower, so I designed one based on the Danzel Chainsaw hanger, and now I can hang my leaf blower out of the way! I printed in Overture Red ASA with 6,6,6 perimiters, .6 nozzle, .32 layer…
this is a velocity stack for a 066/660 stihl
Tankdeckel für Stihl 015 Motorsäge. Empfohlenes Material ist ABS bzw. ASA um die nötige Festigkeit zu erreichen. ------------------------------------------------------------------- Tank cap for Stihl 015 chainsaw. Recommended material is…
I made this thing to replace the worn out velcro strap that came with my Stihl Magnum blower. I designed it for nylon; YMMV with other materials. It secures to the nozzle with a small ziptie, and hooks to the top corner of the blower (as…
This is a compact support designed for a blower. It’s quick to print and requires no supports, making it a hassle-free project. I’ve included the STEP file so you can easily modify the design if you need to adjust the screw size or make…
Material: PETG Infill: 30%
Wandhalter für Stihl HSA 26 und GTA 26, die Geräte werden aus Sicherheitsgründen ohne Akku in die Halterungen gestellt. Mir ging es darum, das Kinder nicht die Geräte einschalten können wenn sie in der Halterung verbleiben. Gedruckt in ABS
Multicolor model of STIHL and Husquarna logo
Holder for Stijl AK lithium batteries adapted to iron tool wall form market Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: Doesn't Matter **Resolution:** 0.3 mm Filament: Prusament PLA Category: DIY
I needed a few extra blades for my stihl fsa 75 so I decided to try to make some to see how well they would hold up to the store bought ones. These come with zero warranty and I highly recommend you use PPE when using these.
Ich habe diese Halterung mit 30 % Füllung, 5 Wandlinien und mit der zur Wand zeigenden Seite auf dem Druckbett positioniert, ohne Stützen.
To mount the shelf, use the Straight open bracket with endstop - 40mm.stl https://www.printables.com/model/109245-bracket-and-shelf-collection-for-skadis-over-200-f
🏗 no supports ⚖ 1 gram of filament each ⏱ printable in 10 minutes each
Designed for the Viking/Stihl iMow 632 robotic lawn mower. Fits both new and old version of the wheels, should also fit the terrain wheels. Prints in two parts for easy printing on FDM printer, the registration holes are 2.6mm, cue tips…
Ružice na šroub se šestihrannou hlavou M8
I recently bought a stihl chainsaw and would sometimes have trouble opening the Gas and Chain Oil caps because they were slippery. This tool gives you more leverage when opening or tightening the caps. Print at 100% infill and use two M3…
Remixed to fit weedeater attachment to the KM 91 R Printed in Bambu ABS Orange
I designed this to replace a broken grassbox fill indicator in my old Viking MB650 lawnmower. Viking lawnmowers are now sold under the Stihl brand, but I believe they still use this indicator flap in some models. The Stihl part number is…
This robust, 3D-printable storage box is designed specifically for STIHL iMOW users. The lid features a raised iMOW graphic and STIHL lettering, making it instantly recognizable and a perfect match for your robotic mower setup. The box…
This is my version of a stihl fsa 57 wall mount, I printed it with 6 layers and 15% infill and it seems work great let me know if you have any suggestions to make it better.
Für die Gummi-Vibrationsdämpfer an Stihl Motorsägen wird dieser Stopfen benötigt. Durchmesser: 12mm. Passend für verschiedene Modelle. This plug is required for the rubber vibration dampers on Stihl chainsaws. Diameter: 12mm. Suitable for…
Dimensionally accurate set of standard double male hexagon pipe nipples modeled according to European and international standards EN ISO 228-1 (parallel British Standard Pipe thread – BSPP / G) and ISO 4144 (symbol N4 / EN 10241). Every…
Ein Modell einer Schutzhülle für die Baumkralle die ich für meine Stihl MS261 gemacht habe. Passt sicherlich aber auch auf andere Kettensägen Modelle. Die Schutzhülle kann ohne Support gedruckt werden. Die Schutzhülle wird einfach auf die…
Stihl trimmer spacer for echo speedfeed 400 head Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament: AMZ3D PLA Black Category: Parts
This is 10 tooth pinion gear for Viking/Stihl lawnmower used in many models like MB4 RT. This suits left & right Print the part with 0.6 with 0.4 mm nozzle (150%) line width to get extra strength. Also you could add 100% infill block…
Stihl Motorsensengurt Clip männlich
Deutsch Ersatzteil 1121 084 4100 Schieber Sommer/Winter Stihl 024/026 Gedruckt in: PETG Schichthohe: 0,15mm Düsen-Ø: 0,4mm Infill: 100% Update: gcode mit ASA hinzugefüht English Spare part 1121 084 4100 Slider summer/winter Stihl 024/026…
I printed this using PETG at 0.2mm layer height with supports. Came out really well. Had to warm underside with hot air gun to allow for correct fitment to original blade support. Photo shows original blade support.
This is a wand clip for the Stihl SG 20 Backpack Sprayer allowing the user to clip the wand onto the piston-lever connector for easy storage. Print instructions Category: Outdoor & Garden Summary This is a wand clip for the Stihl SG 20…
Object description: Hook for STIHL SHE 81 blower & shredder vac. and other types with the same grip. Recommended print settings: Material: PLA, PETG, ASA/ABS. Resolution: 0,2mm Infill: 15% Perimeters: 2 Brim: no Support: yes, paint on…
Someone in China makes very nice promotional item for STIHL: a little chainsaw with sound, that is perfect scale for 1:10 and 1:8 models, making it a nice accessory for any 4x4 truck - it is even often sold by stores that carry RC cars…
Printing Instructions: download the file divide the model into objects in your slicer software duplicate the small knob print the parts screw the knobs with two M3x5 screws to the baseplate Additional needed: 2 M3x5 countersunk screw
Material: TPU/TPE Flexi-filaments be like rubber with chemical protection.
Another part of the cutting head, I took advantage to made a slight modification.
Verstärkung für die Sollbruchstelle an der Kindermotorsense. Da ich leider schon 2 von den Dingern für meinen Sohn Kaufen durfte habe Ich mich dazu entschlossen eine Kleine aber doch recht Effektive Verstärkung zu basteln. Gedruckt habe…
You should probably use a brim and support for the over overhangs PETG or ABS something that can handle heat, and it would be a press fit on my saw (stihl ms 251 c) I'm not sure if it would be compatible with any other stihl saw I didn't…
A tube extension for my Stihl BR400 blower. Has a bayonet style connector that fits on the blower on part 1. It fits tight against the taper on the mating tube. I took 2 passes with the deburring tool and it fits perfect. For part 2, it…
