Counting matching models…
This design holds a Stiltz elevator remote using the wire from an original wall mount that comes with the remote. It slips around a floor jack (2.25" diameter top pole, 2.5" diameter bottom pole) without any additional attachments…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple attachment you can screw on the legs of your LACK table from IKEA to make the table higher. Choose from one of prepared sizes: 50, 100 and 150 mm. Can be printed both standing up or laying on a side. Hole in the middle to…
Intended for use with Voron printers that use the awesome RockNRoll mod by RockNLol. This stops the printer from tipping over if the center of mass is a bit higher. Print settings I used the settings recommended in the original mod, so:…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Final Fantasy inspired, Stiltzkin Moogle, Tabletop DnD miniature 25 mm medium base which can be used for DnD and…
Use for cutting out three prong holder from cone 6 clay to insert stilt holders in. Use the ejector to push the clay out when cut. Remember to use a release agent like olive oil spray or corn starch to make the clay separate from the…
Grimm's Fairy Tales - Rumplestiltskin - The Miller's Daughter 3D printable model.
You'll see these rising out of the fog: the stilt villages of the Mire pygmies. They look flimsy, like a stiff breeze could knock 'em over. That's what they want you to think. Those stilts keep them high and dry, above the leeches and the…
Finger stilts Finger stilts just for fun :)
My Samsung Fridge has a small shelf at the top that can flip up if I need to put some tall items in below it. I had the fridge for a year and that shelf was all-ways flipped up and out of the way. But I wanted to use the shelf. So I made…
Grimm's Fairy Tales - Rumplestiltskin - Queen Guesses his Name Diorama 3D printable model.
Grimm's Fairy Tales - Rumplestiltskin 3D printable model.
Grimm's Fairy Tales - Rumplestiltskin - The Greedy King 3D printable model
After I bought the EP-40 "Riddim", I now had three Teenage Engineering EP units, and had a new problem on my hands, storing them in such a way that I can access them quickly. Hence this design, inspired from banquet or conference…
Model Version v3. Hollowed and taper changed to allow stacking v2. Hollowed out to stiffen the unit and reduce filament v1. Solid unit Recommendation I tried using PLA and PETG and they both are stron enough for my uses so use what is…
two little dudes to hold your chopsticks one up high, one down low
You can spot the Mire Doctor easily; they're the one with the biggest, scariest hat and the most unpleasant ideas. You might laugh at the strange lookin' fella, but those stilts aren't just wood. The mangrove roots have fused with their…
Attachment for lack stilt by martin Lexa it attaches to the bottom of the stilt and works like a Lego brick
A connector that allows a hamster house to rest on dowel stilts. Designed to fit the NiteAngel maze house. Assumes the house corners are ¼" plywood and the dowel is 1 ¼". Print with right angle on bed and supports. 10% infill seems fine.
A plant pot on 3 stilts. The pot itself has a small hole at the bottom end to drain water. The base has a small hole in the middle to catch the water and conduct the water in 3 directions in the pool. 15% infill for the base should be…
Designed to hold a 1 inch diameter vial, with a base to support the plant and prevent it from falling over. This design has a lofted base that meshes the round body with a hex base. Check out the other styles too: Plant Vial Stand - Hex…
I was gifted a pair of old Pro Jump Stilts which had broken straps on them so I decided to redesign the straps and get them usable. I have started with the front strap, which is this model. I have printed it and got it working and…
Voron RockNRoll stilt for 6mm panel (panel + gasket)
My Roomba was getting caught on the horizontal bars on the legs of my counter stools, so I built these “stilts” to raise the height of the bars slightly so that the Roomba's bump sensor can detect them and the Roomba doesn't try to go…
Introducing Finger Stilts – the miniature marvels that'll turn your fingers into towering titans of fun! Imagine the world at your fingertips, quite literally! These aren't your run-of-the-mill toys; they're the ultimate blend of…
These are bucket stilts designed to be easy to print and very resistant. There are 2 versions, the first one (unicorn) is very resistant but consumes a lot of filament. I made a lighter one (heart) that can still support an adult weight…
Printed with a 0.8 mm nozzle, primarily due to the amount of material needed. Model can be scaled to accommodate other sizes. No support needed.
Super fast to print and uses very little filament - Can be scaled before printing to make it longer or wider!
This insert is designed to fit Rumpelstiltskin in the photo caddy. This design along with several others have OpenSCAD files available on my GitHub Made specifically to fit Photo and Craft Keeper 4x6 inch storage bins (made by Simply Tidy…
I initially designed this to raise my cappuccino cups up higher to prevent splashing espresso all over my kitchen counters, and added slots to hold the portafilter afterward. It will hold the portafilter for a Breville Bambino with three…
Hello! My daughter's figurine collection is getting new members. She is very fond of the characters from the Thea Stilton books, so I started modeling them for her. Our first character is Colette. Enjoy using it!
MMU3 Spoolholder Stilts, four heights are provided: 10, 20, 30 and 40 mm. Created for the injection molded Spool holder - R4. Optional increased height in case a bend of the PTFE tube is too sharp. This can be the case for your setup if…
You'll need to print four of these bad boys.
Hi I got wooden stilts from Tiger shop for my birthday and after some walking I created those upgrades. Now it's easier and more comfortable to get on high :). Step should have high infill ~50%, rest can be standard. Shoes mounts and…
This mount for the Zooz ZSE41 contact sensor snaps onto a 20mm x 20mm metal bar. The metal bar may move up and down, thus, the magnet and contact sensor cannot be fixed on the structures. The bar will move down by 4" on occasion which…
Hello! My daughter's figurine collection is getting new members. She is very fond of the characters from the Thea Stilton books, so I started modeling them for her. Our second character is Pamela. Enjoy using it!
One-Day Design Challenge: From initial concept to fully functional parametric CAD assembly in 24 hours. This entire project was engineered and coded from scratch in a single day, showcasing rapid prototyping capabilities, iterative…
You'll see these rising out of the fog: the stilt villages of the Mire pygmies. They look flimsy, like a stiff breeze could knock 'em over. That's what they want you to think. Those stilts keep them high and dry, above the leeches and the…
Printed with a 0.8 mm nozzle, primarily due to the amount of material needed. Model can be scaled to accommodate other sizes. No support needed.
Hello! My daughter's figurine collection is getting new members. She is very fond of the characters from the Thea Stilton books, so I started modeling them for her. Our first character is Colette. Enjoy using it!
A Stilt Spider. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
ORIGAMI STILT | Table Lamp E14, E26, E27 print-in-place (NOTE: this version is available at no extra-cost to those who already purchased the original Origami lamp and the Origami PIP version .) Here is a long-awaited update of the…
The "network" cable (for the limit switches in the base) that runs from the bottom of the Stiltz lift/elevator to the top can rub against the guide wheels. The model eliminates this problem by holding the cable safely away from the…
These are 3-D printed hoof covers for digitigrade stilts my wife made for her Satyr Renaissance Fair costume. The stilts are simple wooden digitigrade stilts that were pretty easy to make (you can find several tutorials online, for…
This is my Stilt walker. This model was made for a fellow Patron of MZ4250 who requested it on the discord server that is available for every Patreon tier. A remix of a model made by MZ4250 . My take on the Stilt walker is unofficial Fan…
Other keychains can be found here: https://www.printables.com/@Wonter_1354734/models Printed on Ender 3 pro Drawing software: Inventor Autodesk 3D-Print slicer: Creality Slicer
