Counting matching models…
It is recommended to use 0.25mm nozzle and 0,15mm layer height (maximum allowed for 0.25mm). Also do not forget to allow supports on the desk only . It appears that one layer raft is needed , otherwise supports does not work well for…
I need 10cc measuring spoon for fertilizer with density of 1.0 - 10cc for 10g that is good for my planters. There are several measuring spoons on the net but most of them are for old openscad and didn't work for me. So I made one that is…
I need 10cc measuring spoon for fertilizer with density of 1.0 - 10cc for 10g that is good for my planters. There are several measuring spoons on the net but most of them are for old openscad and didn't work for me. So I made one that is…
I have seen various tool organizer designs, but they were all kind of huge, or bulky, and were designed to hold a wide variety of tools. They looked like they would eat up a ton of filament to print. I wanted a simple organizer or caddy…
To prevent the protective jaws from breaking, it is important to use a ductile, non-brittle material. Adjust thickness of rim flange to your needs in your slicer. Print instruction: material: FLEX hard or ductile ASA, PETG supports: no…
It's a 3d model of the creator of good mass produced hobbyist 3d printer company. I created this using tinkercad (because onshape can't edit stls very well and web sketchup is very laggy on stls). Might need some manual support. I hope…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
I like to use my rowing time to catch up to some series, watching Prime or Netflix with a Galaxy Tab and a pair of wireless buds. This remix accommodate a larger device than a phone.
Print using suitable materials for your aquarium This "hide" has a lip on the top to prevent sand and substrate ingress into the tunnel when fitting it. Part measurements Height: 5cm Width: 22cm's Depth: 4cm's
Here is a sparepart Connecting Angle suitable for the Bestway Steel Pro UV Careful Kids Pool. Maybe also for other Bestway pools, based on the steelframe concept. Please use PETG for printing, 20% or more as infill and minimum 5 wall…
Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…
Beschreibung Dieses 3D-Modell ist ein Ersatz-Handrad für ein Geberit Eckventil . Es dient als Austausch für ein beschädigtes oder verlorenes Original-Handrad und ermöglicht das manuelle Öffnen und Schließen des Ventils. Das Modell wurde…
Underseat compartment cover w logo dual color Material: PETG Layer: 0.2mm Nozzle: 0.4mm Printed on Bambu Lab X1C w AMS Normal Middle Small
With these hangers you can sort and arrange your cables and/or Multimeter leads. Printed with my MK4 in PETG. I printed standing, with supports, which give the part more stability. Explore my other Printables:…
Two models available. One with extra details inside the courtyard and with a drawbridge, the other with these details removed. Cry havoc and let slip the dogs of war.
I need new equipment which fits for the skeleton https://www.printables.com/cs/model/78695
UPDATED! WIP! Plastic trim piece suitable for the outside temperature display (ATA) suitable for w201, w124, w126 Basically an almost 1:1 with the real part, save for a few unnecessary angles. Added 4 different models, full versions and…
File set for larger print beds will upload individual files shortly. The two sides press together to seal the bearing in. I used tree supports touching the print plate only. Use four R12 trailer bearings with the lip so the spool doesn't…
I have printed Paul Arden ‘s Apple Watch Dock in wood filament a while ago (see make ). Using the Woodgrain GCode post processor I altered the printing temperature for every layer. I liked this so much, I thought, I’d push it one step…
I really like the concept of the FT EMS. I wanted to be able to attach / detach my Meanwell LRS-200-24 without needing to disassemble all the FT EMS Grid, and not be obliged to install it before attaching the FT EMS to the frame. So I…
During working as a painter I often need a cutter for trim works. Now I have the cutter quickly on hand. Designed in TinkerCad, printed on my MK3s+. Used PETG for filament. Came out nicely. Be careful with the usage of (all kinds of)…
使用 M3-M4 螺钉。硬盘盒后面的散热风扇为 12个 20-12 个 25MM。硬盘盒的背板使用自定义的背板大小。电源使用 FLEX 电源（1U 电源）。电源开关的孔径为 16 毫米。第一部作品虽然有缺点，但可以作为参考。 类别： 小工具
The original hair catcher hangs deep in the drain in the water, which I found very unpleasant, so I designed this hair catcher so that the sieve and the hair can dry and it is perceived as more hygienic. The part was created with FreeCAD.…
Print instruction: material: PETG supports: no layer height: 0,2mm nozzle diameter: 0,4mm brim: recommmended - width: 6mm enclosure: not required
Für einen Flipper benötigte ich eine Halterung zu den Heschen Spulen HS-0530B. Diese haben 12V 5N und 10mm Hub. Die Löcher zur Befestigung mit M3 sind hier exakt passend. Die Befestigungslöcher am Boden haben 3,5 mm Durchmesser. Die…
Unterschrank und Platte sind geteilt wegen der besseren druckbarkeit. Der Schrank wird an die Platte geklebt. Dafür gibt es in der Platte eine passende Aussparung. Bei gefallen lasst mir doch gerne ein Like, Make oder Kommentar da The…
Tischeinlage mit Absauglöchern, die für 90° und 45° Schnitte genutzt werden kann. Zum drucken auf die Flache seite legen. Bei gefallen lasst mir doch gerne ein Like, Make oder Kommentar da Table insert with suction holes that can be used…
This model helps prevent accidental operation of the light switch when the lamps are controlled by motion detectors, for example. Fits for BuschJäger (BuschJaeger) Balance SI Series Dieses Modell hilft eine versehentliche Bedienung des…
There are two versions: 30 phones (81.6x19mm slots, 250 x 207 x 70mm) Some phones with thick cases might not fit in this version. 16 phones (86x19mm slots, 176 x 166 x 70mm) This version has a lot of space for many phones.
I have seen various tool organizer designs, but they were all kind of huge, or bulky, and were designed to hold a wide variety of tools. They looked like they would eat up a ton of filament to print. I wanted a simple organizer or caddy…
To prevent the protective jaws from breaking, it is important to use a ductile, non-brittle material. Adjust thickness of rim flange to your needs in your slicer. Print instruction: material: FLEX hard or ductile ASA, PETG supports: no…
--- This model includes a break to fix the caastor. You can find a model without break - here . --- This furniture rollers have smooth 360 rotation around the vertical axis and can be used for example for your Prusa Enclosure V2 - MMU2S…
Beim Ikea Besuch die Skoläst Spülbeckenablage mitgenommen. Doch schnell stellte sich ein "Problem" heraus. Unser Spülbecken ist nicht tief genug oder unser Spültuch zu lang? Jedenfalls hing das Tuch immer auf dem Boden des Spülbeckens und…
It's a 3d model of the creator of good mass produced hobbyist 3d printer company. I created this using tinkercad (because onshape can't edit stls very well and web sketchup is very laggy on stls). Might need some manual support. I hope…
Eine Kabelhalterung die sich am Gerät in die Halterung für die Bodendüse einhängen lässt. Wiederum lässt sich die Bodendüse am Kabelhalter einhängen. Die Halterung besteht aus 2 Teilen. Der “Klipp” wird in die Aussparung an der…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
This is a Bracket for to use UNIVERSAL AM4 water cooler blocks, especially EKWB, Corsair and NZXT and other generic models with AM5 motherboard. So, you can use your old water cooler and don't have to buy a new one!
To make it waterproof. I recommend to add silicone (as example Done Deal) on all adjacent surfaces, and to the wires under the small cap. Use it on your own risk! PS: parts are very stiff to connect. Its important for better waterproof…
Printsettings: 0.2mm ~20% infill (still testing!) no support needed use PETG! PLA might be to bridle You need a rubber launcher! like this or this I'm currently trying to build a rubber toy glider, which can be printed in one piece…
SD Card Holder for Aluminum Extrusion Suitable for Original Prusa i3 MK3 / S+ SD Card holder left side Please also see: SD Card holder right side. If you like this design, please give me a like and post makes.
SD Card Holder for Aluminum Extrusion Suitable for Original Prusa i3 MK3 / S+ SD Card holder right side Please also see: SD Card holder left side. If you like this design, please give me a like and post makes.
Filament guide Suitable for Original Prusa i3 MK3 / S+ Suitable for Filament spool holder without bearings Print these parts / quantities Part 1 = 1 piece Additional notes If you like this design, please give me a like and post makes.
Drop chute,cargo door suitable for a RC Bushmule from Hobbyking (Avios). The Bushmule has a cargo door built in as standard. I did not like this design and I have designed a new one This one fits exactly into the hole from the cargo door.…
A cute lamp or decorative piece to celebrate a newborn baby! Suitable for both boys and girls. Easily add a name on top to create a unique and personalized gift. This can be customized with a standard slicer program. Perfect as a gift or…
I love packable bags, but the arm straps by nature are uncomfortable. A sternum strap seems to place the arm straps in a good location which makes the bag much more useful. I designed 2 different sizes. A 7.5mm x 1.5 mm which fit my…
I love packable bags, but the arm straps by nature are uncomfortable. A sternum strap seems to place the arm straps in a good location which makes the bag much more useful. I designed 2 different sizes. A 7.5mm x 1.5 mm which fit my…
The primer bulb design do not need support and the head of the bulb is a flat surface to avoid smearing. Print settings for Ninjaflex (85A): copied Prusa Generic-Flex profile and adjusted extrusion multiplier to 1,3 printed on smooth PEI…
Children's combination pliers Suitable for Bosch tools adapted for the screws from Bosch / Klein with a wrench size of 20mm Accessories: a nut M3 with locking paint or a self-locking nut, as well as a cylinder head screw M3x14 or M3x12…
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
This is a stealthchanger head cover to allow cleaner mounting of a SV08 standard head onto a front mounted dock. This gives the head a flat front face, and allows for magnet placement to aid in dock retention. See…
General description The adapter is mainly created for use with a peristaltic pump , where I didnt want to press the power button of the screwdriver for a while to keep constant speed. Using the adapter allows to adjust speed to your needs…
Universal Card Holder – Suitable for Most Standard Cards This stylish and practical card holder is designed to fit most standard-sized cards such as bank cards, ID cards, driver’s licenses, and loyalty cards. Perfect for use at home, at…
I liked the original design of the box, but I wanted to use it sideways, and without clips / latches the lid just kept falling open. I added clips on the lid and clip holes on the base, so now this box can be closed and the lid stays on…
To assemble the limit stop use following fixing elements: cylinder screw M3x20 | quantity: 2 hexagon nut M3 | quantity: 2
Suitable for PK Knight blaster universal picatinny rail. Print using 4 layers, 35% infill.
Set besteht aus Bodendüse, Schlauchverbinder (32mm) und dem Anschluss an die Ansaugdüse der Filterpumpe. Als Saugrohr dient ein 32mm HT-Rohr aus dem Baumarkt! Ich habe alles aus PLA gedruckt, da die Druckteile bei mir nicht dauerhaft im…
The new towing eye of the trailer is adjusted for a Rolly Toys John Deere 7930. The original height is designed for rollyKid tractor. The adjusted trailer fit also to the smaller tractor. The part is printed with PETG and a layer height…
FDM 3D printer optimized rugged Brackets/Yoke/Clip for headsets. Useful to replace broken or worn out ones. Microphone support with slim and rugged options. Twist to lock functions makes the clips hold in place and move smoothly without…
Simple sofa, no supports needed. Ideally add a cushion for added fun. I've attached one with a little black elastic so it can be oriented on the base for a sitting cushion or upright for a back cushion. Suits roughly 10cm action figures.…
NOTE! I have now designed several of these holders so this text is copied and pasted to each of them so the links work. The various holders are designed to accommodate bottles in a range of sizes and were originally designed specifically…
NOTE! I have now designed several of these holders so this text is copied and pasted to each of them so the links work. The various holders are designed to accommodate bottles in a range of sizes and were originally designed specifically…
Wall cleat 3mf is available but not STL (as exported models from PrusaSlicer do not include negative volumes).
I have the nozzle size on the plate, so I can see from a distance which nozzle is currently mounted, without having to look directly at the nozzle. Very helpful if you have several printers with different nozzles.
Alternative handle suitable for thicker panels. Handle is mounted on the printer frame instead of the door, allowing to be mounted regardless of the thickness of your panels. Motion is limited to 20 degrees and handle in closed state is…
This Kayak-Model can be used with the commercial Smurf figurine. You can either print the single-color version or the two-color version. Printed in PLA without supports.
Die Rahmengröße ist 12cm x 12cm. Bildausschnitt 9cm x 9cm. Vorder- und Rückseite halten mit eingedruckten Magneten (Neodym 7x1) zusammen. In den G-Codes sind die Druckstopps zum Einlegen der Magnete und der Farbwechsel schon mit drin. Der…
Needed to have something to mount auxiliary lights to the crash bar of my Honda NX500. They needed to fit the 3" Nilight Light Pods to the bars with a 145° inward, and 170° downward angle. I ended up with this design that accommodates the…
Print instruction: material: PETG or similar supports: required layer height: 0,2mm or 0,32mm nozzle diameter: 0,4mm or 0,6mm brim: not required enclosure: not required
Small animal water bottle holder Suitable for Rabbits, Guinea Pigs & Chinchillas For bottles 320ml - 25 x 6.5 x 6.5cm or scale as necessary
I edited the depth of the chute attachment on the back of the printer and lengthened the chute and foot cradle so everything fits with the enclosure. It functions as it was originally designed with good clearance. Note: Alterations were…
BOX-ESP32-EVB is plastic box which can be used with both ESP32-EVB with the internal PCB antenna and ESP32-EVB-EA with external antenna.
Die Idee war einen Christbaumschmuck zu entwerfen. Daraus entstanden sind 3 verschieden Weihnachtliche Sterne, die sehr einfach gedruckt und an Ihrer Druckfläche zusammengeklebt werden können. Fügt man Ihnen beim Zusammenkleben noch eine…
very easy to print. Only perimeters, layer 0.20. No brim. If you found this useful, please leave me a like. Merry Christmas!
The hook is made from flexible filament, which prevents any risk of injury from the part. Print instruction: material: Flex Hard - any other material will work also layer height: 0,3mm nozzle: 0,6mm (0,4mm) support: no enclosure: not…
Print instruction: material: PETG or ASA supports: partial required layer height: 0,25mm or 0,32mm nozzle diameter: 0,4mm or 0,6mm brim: not required enclosure: not required
Here you can find Anarchy Charm… Additionally, you can find a print profile also for Teufel MYND speaker… It has a suitable pin at the back which fits to MYND grill holes. You can customize your speaker in an unique way… Enjoy…
Here you can find funny ADHD Charm in AC/DC shape… Additionally, you can find a print profile also for Teufel MYND speaker… It has a suitable pin at the back which fits to MYND grill holes. You can customize your speaker in an unique way……
I like to use my rowing time to catch up to some series, watching Prime or Netflix with a Galaxy Tab and a pair of wireless buds. This remix accommodate a larger device than a phone.
Print using suitable materials for your aquarium This "hide" has a lip on the top to prevent sand and substrate ingress into the tunnel when fitting it. Part measurements Height: 5cm Width: 22cm's Depth: 4cm's
Here is a sparepart Connecting Angle suitable for the Bestway Steel Pro UV Careful Kids Pool. Maybe also for other Bestway pools, based on the steelframe concept. Please use PETG for printing, 20% or more as infill and minimum 5 wall…
Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…
Beschreibung Dieses 3D-Modell ist ein Ersatz-Handrad für ein Geberit Eckventil . Es dient als Austausch für ein beschädigtes oder verlorenes Original-Handrad und ermöglicht das manuelle Öffnen und Schließen des Ventils. Das Modell wurde…
EN: This is non-original replacement part for Bosch/Siemens dishwasher (originally made for my Bosch SMV46KX01E/28 dishwasher ). It is almost identical as original part, only issue is that it doesn't move so much freely as original one.…
ER40 collet holder suitable for using in Lista cabinets (50mm drawer height). Width is designed to be '3E' (lista terminology) FreeCad Sources included Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: No…
For my filament box I wanted to have a spool roller with following features: Shall save space in the filament box. Enable easy replacement of filament spool. Shall work for 1kg spools with ⌀200mm. Shall be robust and avoid jumping out of…
Underseat compartment cover w logo dual color Material: PETG Layer: 0.2mm Nozzle: 0.4mm Printed on Bambu Lab X1C w AMS Normal Middle Small
There are any number of headphone holders here on Thingiverse, and perhaps I didn't look hard enough but I wanted one with a large flat back panel so it could be stuck on with double-sided adhesive tape rather than a clip-on or screw-on…
No special print instructions. 2 versions, one "full size" and one for limited space behind. If you want to get rid of the orange ring on the M5Dial, this one works fine: https://www.thingiverse.com/thing:6950749 Beautiful when printed on…
With these hangers you can sort and arrange your cables and/or Multimeter leads. Printed with my MK4 in PETG. I printed standing, with supports, which give the part more stability. Explore my other Printables:…
Debossed Widgets 1"-2"-3" Measuring Widget 30mm Steppers (1", 2", 3") 40mm Steppers (1", 2", 3") Melee Zone Markers Category: Toy & Game Accessories
You need a metal RMR optic plate sold on ebay ~10€ for this sights to work. Sight is in front of the window, so not all RMR optics are compatible. Works with airsoft only. All gun sizes.
Cute little piggy sleeve designed for covering wheelchair brake handles ( 4ma3ma TUK 24) Project Background One of my customers wanted to give her wheelchair a little farm-themed touch. When we came across these little pigs, we knew right…
Two models available. One with extra details inside the courtyard and with a drawbridge, the other with these details removed. Cry havoc and let slip the dogs of war.
Hello, my Marui battery discharger case was broken, i made the new one in PETG, we can use also ad a resistor load, inside there is a ceramic resistor 20 W 30ohm , but you can change it as per your needs verifying the necessary space. The…
