Counting matching models…
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
This is printable enclosure for Flashforge adventurer 5m, this model is made by Flashforge . Flashforge will soon release a kit on their homepage with neccesary items. Measurements for panels: Top Plate 332 x 315 x 3 24mm Radius Handle…
All printable parts for your Original Prusa Enclosure . The parts are divided into folders as they arrive in the multiple bags from the factory. In file others you can find part needed for the Silver PSU. All of the add-ons and community…
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Printable accessory developed specifically to enable you move your Original Prusa Enclosure around easily. The handle is symmetrical, but you need to print 2 pieces. Check the guide on how to install the Transport handles . To mount both…
👇 See sizing instructions below 👇 Original Tingivese Description This is a remix on ohmg's tape measure holder . Thank you for providing the STEP file! My wife's tape measure had a rivet holding on the metal end, so I had to make a notch…
IMPORTANT Please read the whole project posts before deciding on ARC enclosure. Download the user guide (ARC Manual), Bill of Material (BOM) and ARC Panels DXF in the “other files” section. Read the user guide to better understand how to…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
Buy the Full Vision kit I've teamed up with VOXELPLA to make a kit that includes acrylic panels, printed parts, screws, and tool. The magnets and threaded inserts are pre-installed, so you won't need anything outside of the kit. Shipping…
Please give it a 💖 if you like it 🥰 Edit 2024-08-31 : The profiles for the K1 “without blower” are compatible with the K1 SE. Edit 2024-08-31 : Made 2 versions for Cura profiles : If you create a new printer as described below use the…
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame. Check the step-by-step guide on how to install the…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Needed some push-rivets after losing some reassembling an Original Enclosure - sharing here in case you need some also. Simple functional push-rivets used in securing thin panels for the CORE One, the Original Enclosure and I assume,…
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
The Printed parts are created by Flashforge, I sketched DXF file of enclosure based on it. All panels are made of 3mm polycarbonate or acrylic panels Besides you need to cut the panels which are cut by laser or CNC cutter, you also have…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
The 🥰 BoxTurtle Enclosure comes with a redesigned front and different skirt parts which require some changes to the TurtleFence . So here they are: Modified front skirts, spacers and the clip-in mesh inserts to fit the enclosure … and of…
How To Download this model Import it into Prusa Slicer and place it in the middle of the bed. Use the same Print Setting and Filament that you want to print with. Select the Extruder that you want the test to print on. Export the .gcode…
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Update 8-21-24: I finally have my enclosure built. I still need to add a couple of magnets for the door and add some lights inside, but it's finally built. Update 2-22-24: I uploaded a 3" variant of the side support and middle brace. I…
This update to the Treasure Chest Puzzle Box is easier to print, assemble, and remix! Printing All parts can be printed without supports. Use a brim if you have bed adhesion or curling issues. Print the Axle with at least 50% infill. The…
CAVEATS Before you download this or try it: I get a fair amount of reports of issues with this particular listing, especially when used with one of my minimal enclosure remixes. For example, this warning from fellow maker Eric Morneau : I…
WHERE GEN2 BEGAN This is the design that started everything. In 2019 I printed a single storage drawer to organize supplies for a used Prusa MK2. In January 2020 I shared it here as the Lack Enclosure Drawer, and it went on to be…
I designed this Print In Place Box With Magnetic Closure in SOLIDWORKS for the Printables Models with Magnets contest (21/04/2023). It's an easy print, without supports, already orientated correctly, in STEP & STL & 3DM files . You can…
Full, polycarbonate enclosure for Prusa XL with many features such as; Strong, 3mm thick Polycarbonate panels Rigid-mounted doors on the bottom section Full, 270-degree opening front for excellent access and view of the print Magnetically…
Summary Soft Tape Measure Spool for a 5/8" wide, 5ft long soft tape measure. Super glue end of pin into core. Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.4 Infill: 20% Filament brand: Any…
**This print is modified for 0.125 inches (3.175 mm) thickness acrylic sheets!** Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3 with MMU2S unit. Check the article with build instructions:…
Description Printable accessory developed specifically to enable you to have more tools close with Tool Holder on your Original Prusa Enclosure. To mount the Tool Holder you will need the following fasteners*: M3x8 screw (2x) * The…
A clip for closing all types of bags, chips, POP Corn, etc.
Features: No extra screws or glue needed Supports multiple tape widths and lengths - parametric Fusion 360 file available Pre-rendered versions for 14 mm, 18mm and 22mm tapes (max length ~150 cm) A universal wide slot to fit all metal…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and You should print the test piece with regular settings…
This is my first attempt at modeling anything more complex than a toy rocket in fusion360. This box features print in place hinges and a snap / latch to hold it closed. The sides have mostly decorative handles. This prints well at .2mm…
This is printable enclosure for Flashforge AD5X, this model is made by Flashforge. Flashforge will soon releas
A minimalistic enclosure for the Bambu Lab P1P. It is designed to print with little material, fast, little to no supports and keep most of the original features of the case accessible with a possible upgrade path to existing models, that…
This custom FlashForge AD5X enclosure features a clean, functional design finished in Galaxy Black, accented with Green Silk Matte inlays for subtle contrast and depth. The build focuses on durability and visual balance while keeping a…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE February 24th-Added optional side handles that are…
All printable parts for your Original Prusa MINI Enclosure . The parts are divided into folders to fit according to assembly instructions. Print instructions Download the latest PrusaSlicer and use the following settings**: print…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
This is a remix of Uncle Jessy's Caliper Tool. I add the measurements directly onto the tool to make it even easier to use. This caliper tool makes it very easy to measure to get the perfect size for helmets and other 3D printed armor.…
A new low profile version #2 incoming soon with better LED placement and more versatile printing with customization options coming very soon Slider version now live and available Test prints have been successful and are now good to go. If…
A mount for a tape measure or anything that has a belt clip. This works with multiboard . It uses the peg holes. Print in the following orientation with outside brims on. No need for supports.
This handy angled bed scraper is multifunctional with a screw measure tool integrated in the handle. The screw length can be measured in mm and even inches. There are 3 options for the text available: Embossed Text Raised Text No Text…
***** Its a tricky print as the clearences are low, DONT GET DISCOURAGED if it fails ****** A multi-tool. The tool has a pair of pliers, a ruler marked in centimeters and inches, and a protractor. The tool is a useful item to have for a…
I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…
I always struggled with drilling the holes for wall mounts and pictures. With this handy tool, you can measure the distance between the holes of the thing you want to mount and can lock it in place with the knob. To achieve the perfect…
An OpenSCAD script to generate a customisable back horn speaker enclosure. It can be customised to suit different overall dimensions, different drivers (up to two), and different side fixings. It also has a customisable space for…
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
This is an enclosure for the Sunton ESP32-2432S028R development board widely available from Ali Express, Banggood, Amazon, etc. The cost on Ali Express is only about $8 USD. The board includes an ESP32 WROOM-32 module and a 320 x 240 2.8"…
I prefer this model better than the original. Lightweight, fast, & easier to read. Print: 1 Bottom layer 0.2mm layer height 1 Perimeter 0 Top layer 0 Infill Set all speeds to 100mm/s, except the first layer speed. Use your default value.…
There are two versions: one that goes from 4 to 36mm in 2mm steps and one that does that only to 20mm and from there on in 5mm steps - because most metric screws are available in 5mm steps above 20mm. It has a M5 printed thread where you…
Update : Design knob added for small model Tested M3 base which can be fix with M3 countersunk 6/8mm without feeling on foot. One-Hand Ratchet Lace Closure Traditional shoelaces often require two hands, finger dexterity and the ability to…
Gridfinity is an awesome storage & organizer system that compartmentalizes your life into 42mm x 42mm squares. But the original design has some flaws - namely that the designs require gluing your magnets in place, and the magnet holes…
REUPLOAD from official Flashforge Wiki! All Rights at Flashforge! The Files for the official AD5X Enclosure as 3mf File. Print at 0,4 Nozzle , 0,2 layer, min 15% infill and PLA. Works and looks great.
Description All printable parts for upgrading your Original Prusa MMU3 for Enclosure instalation. Before you start printing, please read the instructions carefully. Depending on the option selected, you either receive all printed parts…
Neat, easy to print enclosure with 4 mm (or 3 mm) polycarbonate sheet panels. The purpose of the creation was to minimize the design and the likelihood of damaging the display by accidentally snagging it. Approximately 750 grams of…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. Note that you need the injection moulded part delivered with your Original Prusa MK3S+ printer (see the pictures). In case you…
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
These are all the parts I created to mod the Prusa Lack enclosure V2 to fit the ender 3. Most of the parts can be found in the Prusa build here: https://www.prusaprinters.org/prints/3673-prusa-enclosure-v2-mmu2s Wood screws:…
Later edit: For the US folks https://mandalaroseworks.com/products/sv08-clear-acrylic-panels if you use code CN3D at checkout you also receive a 5% discount! thanks to Mandala Rose Works you have to chose if you use a top hat or not to…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Lots of Gridfinity designs don't require glue, they just require a hammer to force the magnet in place. This is a simple jig that will align a magnet perfectly in place, and always in the right polarity. The other end is rounded to make…
A shelf to hold 5M printer essentials. Sized to fit the glue bottle that comes with the printer as well as other items. For the center mounting bolt be sure to use an M4 jam nut for clearance to print head. It gets very close to the frame.
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
Remixed from @HarpreetSing_2603563 with toothed jaws for better grip.
A simple yet innovative hook that uses pressure to hang your clothes, towels, and rags with a natural, effortless gesture. With an elegant and functional design, you can either fix it with screws through a base that fits into the hook, or…
Make Your Own Grow Tent! or 3D printer enclosure (or whatever you need) very useful for all kinds of applications, the size is of your choosing. chop the rods to your desired specs, make the box before finally cutting and draping the…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
Improved version with display installation from the inside (without frame). _____________________________________________________________________________ Enclosure with 4 mm polycarbonate sheet panels https://a360.co/47jcXw3 . The purpose…
Design Approach: Give the A1 Mini a housing that is perfectly matched to its size. Now with bigger dimensions (490mm) everything fits inside. Don't worry for bent heatbed cables or not enough space for a pooptray. If you plan to use the…
TL;DR: Print the top, print one of the two bottom parts, and optionally print the cable holder. This heatbed cable cover and holder is based on the original Prusa part. It keeps the exact dimensions for hardware, LED viewing window, cable…
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
Printable accessory developed specifically to enable you insert more spools into your Original Prusa Enclosure. In case you have the injection moulded part delivered with your Original Prusa MK3S+ printer, check the alternate version:…
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…
Feeling the pressure to squeeze in one last gift this Valentine's day? This playful 3D print could help you in a pinch! There are three styles available - light, firm, and OUCH! Choose wisely. Be sure to print in PETG, and add extra walls…
Talon/half-length nerf magazine designed to be vertically printed in record time. Faster to print, more modular design, more compatibility, more customizability! Print this with 1 wall with a good PLA+ filament and it'll be a strong,…
High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…
Multi-color/Multi-material and Flat-Top/Landable Treasure Chests available on my Gumroads Store and Printables Store . Overlay tile replacements for the board game Gloomhaven or any 28mm table top gaming. Tile Count: 6 Gold, 6 Silver Pick…
All details are in the PDF uploaded: Design, BOM, Printing, Some assembly details Files you will find here: Photos PDF “Lack enclosure documentation_Vx.pdf” All STLs Full assembly in STEP ------------------- Our intent was to be able to…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
This is a cool case. Designed for Heltec WiFi LoRa 32 (V4) with GPS module support. Hardware: 3000mAh battery, PCB, antenna, GPS module. Three M2.5×8 self-tapping screws required. Personal use only. Commercial rights and custom design:…
Simple attachment to hold a tape measure
Material list (non-printed parts): 2 IKEA Lack table 55x55 cm (or stack 3 if you prefer a higher standing position) 2 Plexiglass (Width: 445mm Heigth: 527mm Thickness: 3mm) 2 Plexiglass (Width: 222mm Heigth: 527mm Thickness: 3mm) 1 PVC…
I would like to present the enclosure design that I have been creating and modifying for several weeks. I created the enclosure for my own needs, because my printer is located in the underground garage. There is high humidity and low…
One of the nicest add-ons for your 🥰 BoxTurtle are the 🤩 Box Turtle Lane Control buttons by Discord user Trev1Ak but sadly they do not fit the skirt of the BoxTurtle Enclosure with its slightly different shape. So I made it work … and…
the spring is recomended to print on PETG, mag bott 2 is of a tighter fit, on my print it just snapped right in without any glue needed
CLICK HERE FOR THE ASSEMBLY GUIDE Available for $119.99 CLICK HERE TO BUY DELACK AT 3D SOURCERER.COM CLICK HERE TO BUY DELACK ON OUR AMAZON STOREFRONT AVAILABLE IN THE USA ONLY! MMU3 COMPATIBLE
A enclosure for the Arduino GIGA R1 WiFi with the Arduino GIGA Display Shield. Made for 4 M3 25mm bolts and 4 M3 nuts. EDIT: Added a version of the case with a built in stand and holes for a shield.
This is an enclosure where the length, width, height, shell thickness and gap for 3d printer tolerance is defined in the user variables menu of Fusion 360. I included the cad file so you can make a box of any size, or change the design to…
This is a printer enclosure large enough to hold the Original Prusa i3 MK3s with the MMU2s and five spools of filament. It is remixed from strita's Prusa Printer Enclosure V2 . The Version 1 you see next to it in the pictures can be found…
Perfect to save your dring from saw dust or insects Can also be used to preserve your drinks
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
This is a copy of a LEGO treasure chest. The model is 10x bigger (1000%) then the original.The chest in the photo is scaled at 40%. It cost me about 6 hours to design this chest. I used the original chest for reverences. The difficult…
![Lockable hole distance measurer with scale (20mm - 200mm) [v1.1]](https://media.printables.com/media/prints/644202/images/5085947_ae90008e-8660-4752-9160-1b9f4a3444cc_1ea70f13-8190-4920-bd57-67c307f5b7f8/dscf8816.jpg)
