Counting matching models…
Converter that fits Australian painters pole thread to a standard 5/8th 11 thread used by surveying equipment. A painters pole is a cheap alternative for extending your radio aerial nice and high. Print instructions I have had success…
Notes: Phase offset 100mm from bottom of pole mount. Designed for m2.5 hardware. Use the (4 mounting hole) battery holder variant shown in pictures. There is a 2 mounting hole variant that will not fit because the terminals are in a…
Stand for survey multiband GPS GNSS antenna. Intended for antenna with 5/8" fixture. There is no magnetic base in this design.
This is a tool for surveyors and other people who have to dig out pits, services and similar small holes in the ground. Can also be used as an enormous ice-cream scoop. :P
A rig for calibration of survey prism poles. Uses 2 x m5 12-14mm bolts & nuts. 1 x m4 12-14mm nut and bolt 2 x screws to attach to wall. I suggest stitching screws, 8g. Insert the M5 nuts into the wall mount and screw the wall mount to…
Control point pin designed to be printed in two colors. I used orange for visibility and black to give a contrast.
A tripod floor star is an indispensable tool if you're going to use a surveying tripod inside on slippery floors. This hub was designed to replace a broken part on an existing product, but it would be very easy to make your own too if you…
This rain cover fits the Leica GPR121 prism; for a version compatible with the more common GPR1/GPH1 (and its many copies), see my other model. The rain cover attaches to the prism by clipping around the vertical pivot connectors, making…
A simple survey target designed for monitoring, station orientation, or stakeout. The plate is made for tapes with a siz
Designed around several specific parts. See image for specifics
UPDATE - Finally done. Here is the finished model. Scope Mount Shaft. As I was printing I noticed one part was missing a small component. I am in the process of printing this out so, for now, I am posting without a finished print. I'll…
This rain cover fits the common GPR1 prism in the GPH1 holder, made by Leica as well as many others. The rain cover attaches to the prism by clipping around the vertical pivot connectors, making it easy to put on and take off. As…
Surveyor tripod adapter so that the OG Star Tracker V2 will not move on the tripod. perfect fit for https://geo-fennel.de/produkte/stative-und-nivellierlatten/alustative/fs-20 You can test your fit by printing the “size test” first.
This is a modified version to have several different layer heights for multicolor printing.
This adapter fits the custom DJI RTK 2 (2022) pole and allows standard 5/8" survey equipment to be attached. Essentially this is the opposite of the other adapter I created: https://www.printables.com/model/317927-dji-rtk-2-adapter I…
3D printing, i designed it with some clearances in order to add some kind of dampening to not scratch the drone, i would use some double-sided tape without taking the other side. Use m3 heat inserts, and 18mm m3 bolts, for the cameras its…
This is the second version of the geodetic target, now partially standardized with a GoPro-style mounting system. This iteration features fewer components, making it more reliable, easier to print, and user-friendly. It includes a…
Fits on Stanley Laser Level tripod (a round pole about 27-28mm diameter) and adapts to Cisco air-ap-bracket-1 for WiFi Surveys. prints without support insert an M8 nut mid print 5xM3 screw inserts + screws for Cisco Accesspoint eg 2702
This is a internal mount for an ArduSimple Survey GPS antenna mount for the Yardforce Classic 500 - the main mower of the OpenMower project ( https://github.com/ClemensElflein/OpenMower ). My chassi is six month older as the one from…
If you can't get enough of Latinum Rush, then you can have your very own D'Vor all week long. Remember the rule of acquisition: A man is only worth the sum of his possessions. Don't miss out.
Whether you are dodging hostiles or grinding for resources, the survey ships of Star Trek Fleet Command —the Fortunate, Envoy, North Star, and Horizon—are the unsung workhorses of the galaxy. Moving these iconic vessels from the digital…
For creating measuring stand used next components printed AP Holder of course Cisco AP AIR-AP1852i-E-K9 with metal ceiling holder aluminium pool telescopic pole, for ability tu put Wifi AP to as stand base Soundking SB400B cable clip for…
Printing instructions: Print at 100% infill with a layer height of 0.06mm with a base layer of 0.1mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Prusament Lipstick Red Transmission Distance: 4.6 PLA…
I use these to keep track of where instruments are, but you can also use them to hold things. You could even leave a note on the fridge saying don't forget the drone tomorrow, held up...........with a drone! :D Each magnet print uses a…
Want to get started with surveying but don't want to break the bank? This reasonably priced kit can be built for around $400 and will give you accuracy to a few millimeters when assisted with RTK or NTRIP correction data. Build two and…
When the Cerulean Surveyor 240 MBES is mounted to the BlueBoat with it's 3D printed housing, its transducer face is facing very close to the floor surface, this risks the sensor face to get scratches during handling of the BlueBoat. When…
This is a replacement cap for the Protimeter Surveymaster. I recommend printing it out of PETG for the material's springyness. This cap snaps in place & holds better than the original 👍
This is a roof mount for the ardusimple GPS survey antenna. Use a two inch 5/8"-11 UNC hex head screw Use a diameter 25mm steel rod fix the rod with small steel screw There is a hole in the adaptor big enough for a SMA connector with…
A small cap to protect GNSS survey equipment mounting threads from dirt and debris. Made for the Emlid RX but works well with Emlid RS2 or other tools with a base 40mm or more diameter that have 5/8-11 threading. Printing: Best…
To survey using an optical level and survey staff needs a perfectly horizontal level and a vertical staff. This helps you or your helper keep the staff perfectly vertical when taking readings. Designed in Fusion 360 in 30 minutes so don't…
Quadlock mount for Survey pole with diameter 32,8 mm. Main purpose is to mount a mobile phone with app that controls rtk antena on a surveying pole. Additionally you will need: 2x M6 nuts 2x hex head M6x50 screws You need to insert the…
This is an internal mount for the ardusimple survey GPS antenna for the open mower project. Fits in a YardForce classic 500 mower. Saw off a 5/8" UNC screw for antenna Use M4 screws for mounting. antenna_distance = 0,32 I added a thin…
This is an external mount for the ardusimple survey GPS antenna for the open mower project. Fits on the front case of a YardForce classic 500 mower. Take a one inch 5/8"-11 UNC hex head screw for antenna Use M4 screws for mounting. Drill…
Leg end caps and bushings for Trimble or Sokkia tripod (I'm not sur which brand).
Extended Length by 2 inches for Air Survey Module Fits Phantom 2,3,4 Category: 3D Printing
The arrow can be colored or the color changed after layer 26 (22 for the negative arrow)
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/ckSKtzmwNna Category: 3D Printing
Repaired this for my daughter and her grandchild. Antenna plastic part was broken. Antenna torn off. Soldered antenna and printed new case for antenna. Printer Prusa MK3S+ Filament white PETG Design TinkerCad
An Adapter to assist with measuring String lines for Kerb Machines. Mounts onto the standard GLS115 Leica Mini Prism Pole.
Tool used to survey and stake-out M20 holding down bolts in concrete. Allows prism to be centered over bolt center. Print out of PLA for a quick, disposable tool or PETG for slightly longer lasting use. Print settings not very important…
Created a marking tool, to help with setting out on vertical and overhead surfaces. Uses prism from leica gmp111 mini prism with +17,5 offset. Tested with ±1mm error, but verify for yourself after printing.
Storage to screw on to a door or shelve for a 30m surveyors tape measure
Tripod model for Gamma Surveyor Vario by GF Instrument. Printed with PETG, using a 15% infill. This is an independently designed tripod inspired by a lost accessory. Intended for hobbyist use only.
A more indepth description will come soon.
The Surveyor boss, from TRIAD game (gametriad.com)
Tripod model for Gamma Surveyor Vario by GF Instrument. Printed with PETG, using a 15% infill. This is an independently designed tripod inspired by a lost accessory. Intended for hobbyist use only.
Needed a quick survey marker for surveying reference points and didn't want to wait for the brass ones to arrive. Printed in PETG (Black and Yellow Bambu PETG HT) with 15% infill on Bambu P2S using AMS 2 Pro. Print without supports, with…
I needed a quick-to-print, sturdy marker pin for soil - the kind you can just push in with your foot. Whatever I found wasn't satisfactory, so here goes.
Questo portachiavi include tre diverse fantastiche funzioni: può fungere da APRIBOTTIGLIE, RIGHELLO e CACCIAVITE per bulloni da 6 mm! Ha una lunghezza fuori tutto di soli 7 cm, è alta 1 cm e presenta i numeri del righello (e il nome della…
I needed a way to mount my video antennas for FPV onto a surveyors instrument tripod. couldn't find any commercial solutions, so I drew one up in Onshape and here is the result. The puck allows you to mount a 8" x 3/4" pine board to the…
Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1264391 Instructions Using the following options: PCBFeet = 1 FPanel = 1 Filet = 2.1 BShell =…
Allows a Cerulean Sonar Surveyor 240-16 MBES to mount directly to the hull of a Blue Robotics BlueBoat . Edit December 6 2024: Fixed incorrect hole size in model files.
