Counting matching models…
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. I made two models: one with a clip for your chestpocket and one with a hole for a keyring. Choose…
Syringe for putty and thick materials with a removable nozzle ,I recommend printing from Petg, it will withstand a higher load
This is a Medical Syringe from the game Rust. A label for it is also uploaded, might need some tweaking irl. UPDATE Made an adjustment to the thickness of the needle cap walls for better printing. Non commercial prop. Category: Props
General purpose hobby craft syringe to apply glue, grease, cake-icing, paint and other liquids into difficult to reach places. The syringe has a fine extrusion however this can be opened up by shortening the nozzle with scissors. Regular…
A Travel Case to hold Vials and Insulin Syringes. Holds five vials up to 16.5mm in diameter and 32mm in height Fits commonly used 3MM Vials Holds syringes up to 120mm in length Fits commonly used 100-unit insulin syringes Room for Alcohol…
These use the lock portion from #3712257, allowing the tip length, diameter, and style to be customized. Included is a collection of simple round and flat tips, as well as a couple examples of angled and offset flat tips. STL files are…
Case to hold seven vials and associated single use syringes. This is print in place. Each vial is approximately 20mm dia. x 39mm high. Syringes are BD 1ml TB. Printing No Supports Change History 2024-02-15: Provide space for 39mm tall…
You can print each of these three components separately and then glue them together for use.
plunger rack for syringes for controlled dosages. A second ring above can be used to lock the plunger in place.
0.3mm layer height. 100% infill no supports Esun PLA+
Summary: This syringe screw feeder helps extruding fluids from a syringe ... ... in a controlled way ... with substantial pressure ... with accurate dosage Extruding e.g. 0.1ml from a 2ml syringe is no problem anymore, even if more…
A needle cap to protect your (mostly workplace) needles, store them a bit more safe and without smudging you other stuff with its liquids :) I mainly want to use this on all of my solder flux and solder paste needles. But recently also…
Syringe earrings that come in 4 versions
A ratcheting syringe dispenser for ~15mm OD syringes. The ratchet has a tongue that flexes to move on to the next tooth on the plunger. Its function relies on friction applied to the plunger which is usually from the rubber tip of the…
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…
Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…
Yet another version of a syringe holder. This one incorporates 14x M10 nuts as weights, to give the thing a lower CG. … and feels much more expensive :-) pause print @17mm to insert the nuts or if not, don' stop :-) Cheers
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
Fits on MINI beds. Internal support design for a safe and strong place to dispose of your used needles. One-way door. Clear, raised labeling helps prevent accidents. Don't push too hard or you will bend the door. Just slip the capped…
I looked around and could not find a solution that met my needs so I hacked this together. I tried to use a couple other designs and even tried modifying them. In the end I just made a solution. This was printed on a x1c in draft mode .24…
Regreasing the linear rails on my printers is a frequent task, and with the many rails that don't have working grease-holes, it's a bit awkward to get grease into the raceways without taking the cart off. I have established a routine to…
Use with standart 75 syringe with cleaning fluid to fix clogged head. Tested with bathrom cleaner to fix my frint head and all works on first try... Video how to prepare for cleaning Should work whit these models (tested with EPSON XP960)…
This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household
This syringe holder provides a secure and compact solution for transporting pre-filled insulin or other 1 ml disposable syringes, preventing accidental plunger movement or damage. The updated design now supports multiple syringe types ,…
Never lose a drop of e6000 again! This thing adapts the e6000 nozzle to a luer lock so that you can load a glue syringe easily. To use: Screw the luer lock end on a syringe Jam the nozzle of e6000 in the other end Squeeze the e6000 tube…
I recommend printing on 100% fill for strength.
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
The open-source syringe pump is a standard research instrument for use in microfluidics and several other laboratory workflows. There are numerous designs available in the realm of open-source syringe pumps. We have combined some of the…
maximum syringe diameter supported 18,5mm PLA
For those of you who place solder paste on a PCB by hand using a solder paste syringe, this tool provides additional control and consistency to the application process. Parts Printed: Syringe Holder [A] Syringe Plunger [B] Knob [C] 1ml…
I developed an holder for 1ml syringe. We used it for COVID19 vaccinating. Its a versy simple model You can use it with silicon sticky feet → Diameter 5mm. Print instructions Print with 0.4 mm nozzle. Layer height 0.2 mm gives great…
60ml Syringe Grip: Better Handling for Easy Gavage Feeding or thick liquid (resine like) My 60ml Syringe Grip makes it easier to use the plunger, which can sometimes be challenging during gavage feeding. It provides a better grip for…
This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…
.16lh on centauri carbon using PalA. Printed in 5min with 2 walls and 15% rectilinear infill. No support needed. Total material used, .93g
Adapter to make it easier to squeeze thick adhesives through a "Monoject 412 Syringe" 18mm diameter. Printed with 4 vertical walls and 30% infill.
I'm a happy Omnipod user, but one of the things I miss from Medtronic's system are the little couplers that come with each reservoir, making it very convenient to transfer insulin from vial to the reservoir. With Omnipod's system, there's…
Update: Added Fusion360 files A holder for a flux syringe based on the gridfinity system created by Zack Freedman. Designed to fit the syringe that can be found here.…
OpenSCAD Source code: https://github.com/johan-adriaans/SyringeHelper What is it This is a precision tool that you fit around the syringe plunger to get a precise dosage of insulin. Note: When using 30 units 0.3ml U100 syringes, you can…
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Holders for bicycle hydraulic brake bleed syringes. The tools hold both syringes upright during a brake bleed, allowing you to have both hands free! Printed in PLA or PETG or other material for the parts and TPU for the rubber bands. I…
During medical emergencies you have to deal with multiple drugs in syringes. Those may fall out of your pocket if not properly secured. There is a holder for 20 ml, 10 ml, 5 ml and 3 ml syringes.
A gridfinity based syringe stand that can support 5-35cc syringes of various sizes with or without their needles. Use the SCAD files to parameterize your print. The base has a shallow recess to collect any accidental drips for easy…
Sim labs loose these often, so I have made a replacement cap that says sim lab so they don't get taken. They break if printed in pla so make sure to print them in resin on an sla printer.
Prevents glass syringes from rolling on the bench when used. Can be used as a drying rack when washing the syringes and their plungers.
This can be used for liquid measurments/precision feeding, its not medical or cyber junkie equipment My another project with optical drive parts... I was asked if these stepper motors would have enough force to move a syringe so I decided…
The original model is made by Termiman, later a mamber PjotrStrog created a nicer and reinforced version of this case, but did not upload an insert that holds a 6ml flux syringe. Since I prefer to have my flux in the case instead of the…
I designed a new insert for the Ruggest Multipart Case (V2) to hold an ENGINEER SS-02 Solder Sucker and a 5ml Syringe to hold Flux. The SS-02 will need clearance of ~5mm above it. Either ensure an insert is facing it with clearance or use…
This model is compatible with the lego system.
Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…
Designed to print in its entirety without support. Changed the tolerance a bit and reversed the thread to make it when you turn the knob to the right the rod plunges and dispenses. Feels more natural that way to me anyways :) Works great!…
impression avec support et deux modèles de support 10ml et 20ml bonne impression n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Covid 19 Vaccine Syringe Pen (BIC) Supports needed Supports and support blocker added to the file
Инъекционный пистолет со шприцем. Пистолет для уколов в домашних условиях. Производит автоматический резкий впрыск. Некоторые детали нужно напечатать отдельно и склеить между собой. Из-за сложности модели она требует корректировки деталей…
a Syringe leveraging a PTF tube to funnel fluids in or out Flex part needs to be printed in flex Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: genereic flex for flex part…
This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy
Two versions (smooth and knurled) provided. Print with sufficient brim! See also my Flux and Solder Paste Dispenser Remix
This is remix of insert for awesome TS100 pinecil case. https://www.printables.com/model/345083-rugged-multipart-pinecilts100ts80-case-v2 This remix has place for 5 ml syringe with flux. Outer diameter of syringe is 13.7 mm, maximum…
50cc of bearing grease, stat! LM8U/LM8UU greasing helper which fits a regular syringe. Great if your grease sits in a can and not in a squishy tube ;). Align the slits with the bearing tracks before injection. Print Settings Resolution:…
This is a series of nozzles and plugs to dispense and store your solder paste. The nozzles exists in 3 variants with a nominal diameter of 1.2 1.8 and 2.4 mm diameter. The plug screws on the tip of the solder syringe to keep it from…
My wife gets a new medication which needs insulin syringes. She asked me if I can quick design her a storage because she don't want the ugly box flying around. Here I present you our insulin syringe dispenser. Tested with U-100 syringes.…
This is a modified form of this model which does not allow remixes for some reason… https://makerworld.com/en/models/377006-snaplock-storage-boxes-parametric#profileId-282924 I made a med station to use at home here and needed something…
First idea was to create a thread in adapter but this one is much simpler…
The syringes of flux for soldering I ordered came with caps and needles, but to seal them, you'd have to take off the needle. Since that would just get lost, I usually left them unsealed with the needle on, resulting in a mess of flux on…
You need to turn it in first time. The screw holes will become smooth.
I needed a precision tip for my 1mL syringe in order to accurately fill embossed letters on my Word Dice , but I really don't like dealing with needles so I created a quick 3D print that could friction fit to the end of my syringe. I…
My flux was delivered in a "normal" 10ml syringe without an additional plunger. I cut off the original piston and altered the piston of “Flux and Sloder Paste dispenser” by @Elektroarzt
It prints with no support in around 1h using the “draft” setting on Prusa Slicer which has a .24mm layer height and a 15% infill.
Gridfinity vertical holder for J-B Weld 2-part epoxy syringes - also includes a slot for the stir stick Based on Zack Freedman's Gridfinity parametric baseplate / bin model:…
Simple syringe holder that holds the syringe on the bike frame or fork during brake bleeding. This keeps your hands free for other tasks. The syringe is hold into place by a rubber band and another one is used to attach the holder to the…
This keeps the dosing syringe attached to the bottle and in two pieces so that it can properly dry between uses. It is intentionally tight so that things stay together even in a travel bag, but every printer's tolerances are a bit…
Syringe holder for aquarium, with enough space to be able to place a label and be visible. https://tinyurl.com/2p96j3vr
I was looking for an syringe pump to automate the fertilization of my nano cube. My first try with http://www.thingiverse.com/thing:539490 failed. The mechanical part was not sufficiently stable. There are many syringe pumps projects at…
i only tested the fit in my syringe but didnt test the real application. I can't rule out that it won't work (could be too much pressure on the threads while pushing).
This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…
Printed in PLA, 15% infill with no supports
A family member recently started taking injections at home and needed a way to store and dispense the syringes. This is just that. If someone can use it, then it was worth uploading to be shared. This was printed on a Bambu X1C with 0.2…
This is a syringe holder clamps onto an IV pole. It's designed for 20mm diameter IV poles and holds two 10mm diameter syringes. The clamp requires a M3x30 socket head screw and a DIN 562 square thin nut (M3 5.4mm x 1.8mm). Update…
Had my own grease in the box and only one syringe on hand, so i remixed it to fit the syringe.
This is a quick and easy printable cap for a soldering flux syringe to keep the needle protected, prevent quick drying of the flux and it keeps stuff from getting sticky when storing the syringe. The design requires no support, tho I…
Recreated this model based on the Zemba design for a different size. Syringe holder inner diameter is 7mm for a 1ml syringe. Bottle neck diameter is about 22mm.
Highish powered food/anything syringe for a 600ml PET bottle. Designed this to replace the feeble icing bags that aren't strong enough to force stuff like mashed potato through small opening. This was my first multi component build and…
Prints very well in PETG with 10% gyroid infill and 3 outer layers.
A great classic of puzzling fully redisgn with syringe shape. Mixing reflection and dexterity, it is perfect to make your brain work as well as those of your family and friends. This puzzle have a medium complexity (approx. 5/10) Covid-19…
Needed a cap to close a syringe with spare oil. Printed in PETG. Brauchte eine Kappe um eine Spritze mit Öl zu verschließen. Gedruckt mit PETG.
The Dental Resin Syringe Organizer – 18 Slots was specially designed for dental professionals who value organization, practicality, and efficiency in their daily workflow. Precisely engineered to hold dental resin syringes, this organizer…
This is not my idea but I created the models to make them public. I use glue to add rubber from inner tube on the arcs that are in contact with the bar/frame/fork/syringe I use M4 bolt (25mm), Knurled M3-M8 Thumbscrews and M4 inserts. I…
This is a convenient stand to hold two bottles of infant medication (such as Tylenol or Advil), as well as four disassembled syringes (body and plunger) upside down for drying. Each compartment tapers to a small hole to let the drips out…
Simple stand for some syringes with soldering flux. It is designed to store it in fridge(or anywhere where will fit). Simple print, no need of supports. It is from two pieces, and holding together with six small 2.5x12mm universal screws.…
This is a mount to clip the 5ml syringe onto the matching 200ml medicine bottle, such as an Ibuprofen suspension or similar. — Printing tips: I recommend to print in PETG, as PLA may loose its clamping force over time. If it doesn't fit…
This is a finger grip, modeled after some of the older syringes. It's meant to slide onto a syringe and give you enough of a grip to help you push the plunger down. It was modeled to fit over a 11.7mm barrel and the finger holes are 24mm…
A must have for working cattle
****************************************** Edit : Add a parts of the .3mf with a smaller hole for the finger parts (identify with a S) You can use the hole for pushing support or the part if it break…
uno strumento di controllo delle siringhe realizzato a moduli collegabili in modo da realizzare il pannello con il numero di comandi che ti serve ho utilizzato siringhe da 20ml https://amzn.to/40kuGzL Ispirato da Remote for…
Pretty useful part for cleaning your baby nose without harming the nose by the syringe tip Print the part rotated 45º with supports (organic preferred) only on plate. Use TPU (preferred) or any other PETG / PLA as they tend to be food…
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
This tool is designed put pressure on a 50 mL lab syringe through a thread mechanism. It is supposed to help in the annoying step to press cell lysates through a 0.45 um filter.
Inspired by Albert van Dalen's Spoty dispenser: https://www.avdweb.nl/tech-tips/pcb/solder-paste-dispenser The dispenser is left-handed. If you want to have a right-handed version, mirror the model in your slicer or just hold it upside…
