Counting matching models…
“Its profile resembled the T65B X-wings she'd flown with Alphabet, but its foils and thrusters were unexpectedly slender and its canopy extended farther over the nose." [From Alphabet Squadron: Victory's Price , Chapter 18] The T70 X-Wing…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
The Silhouette of a Yamaha Ténéré T700 for Enduro and travel enthusiasts motorcycle rider on a key chain. Settings Value Infill 5% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
The Molle for all Yamaha Ténéré T700 Enduro and travel enthusiasts motorcycle rider. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG / PLA Supporting Material none Comments printed on…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…
I took the body kit and remixed it to make a slot car shell by opening all of the holes. A motor plate and window buck are included, to make vac form windows. I would scale it to 58W X 125L x 29H (it's close but you should adjust in your…
I've had this in my collection for a long time. Not sure if it is even possible to print as it is so detailed. You may get away with it if you printing in quite a large scale. Any way I thought someone might like to take it on as a…
You Need: 2x Cap Head Screw M6x12 2x 3030 Drop-in T-Nut M6 8x Cap Head Screw M2.5x10 1x Cap Head Screw M5x40 1x M5 Nut
INTRODUCTION With the popularity of BTT Pi screen, there has been a request to support the biggest model the Pi TFT70. THE DESIGN The screen mount was designed to be in line with other BTT Pi TFT mounts. For the Pi TFT70 screen, it…
I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
I made this remix for use with the bigger BTT TFT70 for KlipperScreen or OctoDash Infil around 25% Uses PLA+ from eSun and it keeps in good shape. No supports are needed, nor rafts and/or brims.
https://biqu.equipment/collections/lcd/products/bigtreetech-pi-tft43-v2-0-screen-board?variant=39337700851810 This case is for the BIGTREETECH PI TFT70 V2.1 Touch Screen For Raspberry Pi…
A BTT PI TFT70 mount for a 2040 aluminium profile. Parts Needed: 4x M3 T-Nuts 10x anykind of M3 x 10 screws 6x M3 Nuts 4x M2.5 x 10 Screws 4x M2.5 x 6 Printed parts needed: 1x Base 1x Frame 4x spacer Printsettings [Screw]: Layerhight:…
FLSUN Super Racer PITFT70 Case & Mount. - Use x4 M2.5x8 screws to fix screen to back cover - Use x2 M2.5x16 to fix front cover to back cover - Use x2 M2.5 x13 to fix back cover to support I have also include Spool Holder that use x4 608ZZ…
Remixed from "Dewalt and Craftsman Case Dividers" by benjamenjohnson (thing:3480845) adjusted the heigh to fit this larger Tough Case+. Print Settings Printer: Ender 3 V2 Rafts: Doesn't Matter Supports: No Resolution: 0.20mm Infill: 15%…
Przygotowałem model pod mój multimetr kompatybilny z sondami bst 050 jp i ich fabrycznymi zatyczkami. wydruk petg ------- I have prepared a model for my multimeter compatible with bst 050 jp probes and their factory plugs. petg print
Frame selfmade middle skir and holder from voron mods: https://mods.vorondesign.com/detail/GzD8TM9kzlhgDBMIjUG0w
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
No print support needed Screw and heat inserts are totally optional for the actual case and even screen , this can hold on it's own as is, just sliding the pieces together, and screen can just rest there (as long as there is no risk of it…
Case with stand for BTT PITFT70. 2x M5x15 bolts and 2 x M5 nuts for the legs is needed. Supports needed for back.
Decided to try my hand at designing my own model. Was needing a case for both of these components, I am slowly working my way to building the Mercury one.1. Only designs I could find required me to cut my stock enclosure, which I did not…
This is a freestanding model. You need to print 3 of the buttons and 1 of the pause buttons. You will need 4X M3*8 for the bottomplate and 4X M3*15+Nuts for the fan, I used a stock 4010 fan and connected to the PI. It is made with 0,3mm…
Very simple case for the BTT Pi TFT70 V2.0. The Raspberry Pi attaches at the back of the display, as per original design and everything is enclosed. An 3007 fan sucks air via the vents on the side of the display and pushes it out from the…
Jedná se o repliku z Schüco Balkontür-Schnäpper 287893 profil CT70. Na původním díle prasklo jedno rameno a potřeboval vyměnit. Originál moc dlouho nevydržel. Tiskl jsem z PETG. This is a replica of the Schüco Balkontür-Schnäpper 287893…
Modular screen case for the Bigtreetech TFT70 V3.0. You will need 4 x M3 x 5mm bolts to attach the screen to the printed case. the bolt holes may need to be cleared with a 2.5mm drill bit and the threads started with a M3 tap to ease…
A Frame / Case for the BigTreeTech Pi TFT70 v2.1 display with an attached Raspberry Pi 5. For this project I used a 200mm flat display cable to connect the Pi5 DSI port to the Pi TFT70 display, and a right-angle USB-C adapter . Hardware:…
Removable stand for: https://www.thingiverse.com/thing:2852822 Category: Toy & Game Accessories
Introduction: Whoever owns a folding handcart probably knows the problem with the break system. After some days of use my break sprockets looked like this: I used the handcart of FUXTEC model CT700. The model has in total 4 of those…
This is a cover that slides onto a pair of needle nose pliers to keep them from damaging surfaces and from injuring you. This design was specifically made for the DeWalt DWHT70799 pliers. These pliers have been discontinued, but these are…
Reverse engineered by an actual engineer. I just modeled and printed them.
This base is used to adapt Metabo Rail with Makita router RT700C
just some spare screws and reuse ones who holds old LCD Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.24 Infill: 10 Filament: Devil Design PLA white Category: 3D Printer Parts
Bought a Raymarine ST70 autopilot control head, and it was previously flush mounted, so it didn't come with this surface mount. I figured I could easily find one, but when that wasn't the case, I made this. I had a pdf of the manual, and…
A replacement valve screw for an air ratchet I bought at a garage sale for $10. This piece holds the ball valve and spring for the trigger in place. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100 Originally published on…
The AT70 Reaver Battle Tank was a main battle tank produced by the Forge World Urdesh The AT70 was considered an inferior design compared to the standard tank of the Imperium, the Leman Russ Battle Tank. The tank lacked any Auspex or…
This 1x3 gridfinity holder for Sony CyberShot DSC-T700 holds: 1x T700 2x Batteries 6x ProDuo Cards
Hi, I’ve been using bamboo cutting boards in my kitchen for a long time. After extended use, they always become noticeably worn (cutting marks, bumps, …). To avoid throwing them away, I planned to mill them flat myself to make them smooth…
PET-G, filling 15%, layer 0.2, but it can be 0.1 for more detail.
A 3D Scan using the Einstar 2, reduced polygon count to 1 500 000, not the best, but should be enough for sketching and outlining. The Einstar struggled with the battery slot.
Klein model van een sovjet t70. Erg snel te printen. Support is nodig, maar erg simpel te verwijderen. Veel plezier ermee! Voor montage, plak de tracks op de hull. Klik de turret in het gat op de hull, zonder te lijmen. Klaar! Let op,…
I needed a frame to cover the sides when mounting the Pi TFT 70 v2.1 on a panel/wall. The idea is that the screws would be installed from the otherside of the surface being mounted to, and then this would clamp the screen and the frame to…
What is it? This is a multi-piece extension for the RatRig V Core 4 500 IDEX. What does it do? The main purpose is to have the touchscreen from BTT the Pi TFT70 V2.1 be integrated onto the frame. But this also raises the top panel by…
All the models I found didn't fit tightly enough, so I create my own version. The photo shows a comparison with the original divider.
ORGANIZZATORE GT70 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Needed a handle to open the door for this https://www.thingiverse.com/thing:2615653 print. Used M6 screws and nuts. The opening for the nuts might be tight. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 3 Rafts: No Supports:…
PARTI MECCANICHE FUSION_GT70 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
This is a very simple coupler that can be used with a THIN WALL BT70 model rocket tube.
Ersatzteil, auf dem Bild rot, für einen Verschlussklip vom Staubsauger Kärcher NT702 ECO. Layerhöhe 0,2 mm Sollte aber mind. mit PETG gedruckt werden. 50% Infill Viel Spaß damit. Spare part, red in the picture, for a locking clip from the…
This is a 3d printable temperature holder for the 2 probes included with the Rectec RT700 grill. The design is my own and not affiliated with Rectec. This design uses the two hook slots on the side of the controller housing near the front…
English: This design is a remix of the ‘Voron Trident BTT Pi TFT 70 Mount’ by @Nathan_235572 In the original design, the screen is positioned in such a way that, due to its large size, it looks tilted backwards. With this remix, I aim to…
A door latch addition to T70E's Ultimaker 3 Door at https://www.thingiverse.com/thing:2615653 Thank you T70E for your great door design! This latch system mounts just like the hinge mounts, but it's a mirror of the original part with some…
ARTE&DISIGN GT70 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
This can be used to transition a 4" thick wall tube (like LOC precision) to a thin wall BT70 tube (like that of apogee components) For model and high power rockets.
Torx Bit holder T30, T40, T45, T47, T50, T55, T60, T70 https://www.adendorff.co.za/mac-afric-12-in-8-pcs-torx-bit-set-ttorxb008
Honda ST70 / CT70 Trail 70 Intake Manifold – K&N RC-0790 Pod Filter Adapter (34 mm Carb Inlet) A smooth-flowing intake manifold that lets you fit a K&N Universal Air Filter (part number RC-0790) to the standard Honda carburettor on the…
Apparently this button is not attached to the camera in any way and will just fall out of the camera when you remove the bottom plate. I recently got this film camera. It had a number of small issues, including this button being missing.…
Dual-height brake lever extension for the stock Yamaha Tenere 700 foot brake. Adds a second contact point so you can adjust braking position for seated or standing riding, improving control and comfort. Designed as a simple bolt-on…
These are two 3d scanned and fixed models for dt700prox earcup adjustment pieces. My right oem one broke after about 2 years and the left followed a few months after. They were printed solid at. 15mm layer height, Supports: standard tree…
This small shelf perfectly fits the Canon T70 to hold it on a Skadis pegboard system. This shelf uses four Skadis Universal Hooks Printed with 0.3mm layer height, 4 walls, 25% infill and variable layer height.
Printed on MK4s: PLA, 20%, 0.2mm Structural. Support Organic (may work without). Rod Mount Holes pushed over the edge of the cart by about 1cm. M8 Rods 2x50cm fit exactly. Rod Mounts fit M8 Nuts. Open rod space allows for 4 standard…
Hier findet Ihr ein schickes und robustes Gehäuse für ein BTT Pi TFT70 Touch Display. Das Gehäuse bietet Platz für das Display mit montiertem Raspberry Pi und es sind auch alle Anschlüsse des Pis noch zu erreichen. Ich nutze das Display…
Turn Any T70 Jar Into an Effective and Waterproof Fly Trap This printable insert transforms a regular glass jar with a T70 lid into a reusable waterproof fly trap. The lid requires a 60mm diameter hole , and the insert is glued from the…
Replacement for Honda CT70 / ST70 Dax Fuel Tank Rubber Packing – 17512-098-000 (K0 Plastic Tank) + Adapter A precise reproduction of Honda part number 17512-098-000 — the rubber packing for the fuel filler neck / fuel tank support on the…
I wanted a portable master klipper controller for my printers so I designed this around a BTT PiTFT70, Pi4b & a 18650 based Pi UPS. During the design process I luckily stumbled across the below video detailing exactly how I wanted to set…
The OEM rubber tends to press against the lower plastic, causing slight misalignment. This extension prevents contact and keeps the components properly aligned.
Hier ein Gehäuse für ein BTT TFT70 Touch Display das ich an meinem Eigenbau Drucker verwende. Dieses Gehäuse kann zum einen einfach auf den Tisch abgestellt oder auf ein 20mm AluProfil aufgesteckt werden. Somit ist man sehr flexible und…
What is it? This is a multi-piece extension for the RatRig V Core 4 500 IDEX. What does it do? The main purpose is to have the touchscreen from BTT the Pi TFT70 V2.1 be integrated onto the frame. But this also raises the top panel by…
The OEM rubber tends to press against the lower plastic, causing slight misalignment. This extension prevents contact and keeps the components properly aligned.
Dual-height brake lever extension for the stock Yamaha Tenere 700 foot brake. Adds a second contact point so you can adjust braking position for seated or standing riding, improving control and comfort. Designed as a simple bolt-on…
Screen and Pi case for the BIGTREETECH PI TFT70 Designed to mount on 4040 rail in either portrait or landscape. Needed Items Screen: https://biqu.equipment/products/bigtreetech-pi-tft43-v2-0-screen-board 7 M3x4 heat set inserts one for…
Angled stand/case for BigTreeTech TFT70 7-inch touchscreen with Raspberry Pi mount, easy desk viewing.
Remixed for the TFT70 Screen Version. Same settings as the original, and same hardware requirements.
Having acquired a BTT TFT70 I needed a case or stand but was limited to 200cm print volume putting many of the existing cases out of reach. These simple legs are quick and easy to print and can be orientated either way up for a more…
After printing the original model by phesketh01 (thingiverse) I believe it to be for an ever so slightly different variation/version of the BTT TFT70. Creating a number of small defects that prevented my BTT TFT7 V3.0 from fitting into…
Mount for a BTT PITFT70 V2 and a Raspberry Pi 4 Screen mounts to the back half using the standoff and screws provided with the screen and the front is attached using 4x25mm M3 that cut their own thread, the rear mount uses 4x4mm M2.5 and…
WIP: It sort of fits the trimmer but is untested as to how long the beard is after trimming! Trimmer adapter (5 cm) for Braun BT7040 Print instructions Category: Bathroom Summary WIP: It sort of fits the trimmer but is untested as to how…
The tabs need to flex before snapping into place, so don't use PLA. Also, PLA would probably sag and melt with the heat of the oven too.
Based off Display Mount for BTT PI TFT70 by LoboThirteen Items needed: Raspberry Pi 4 Computer Model B BTT TFT70 touchscreen 4 M2.5*6 screws 4 M2.5*8 screws 4 m2.5 heat inserts For mountable enclosure use LoboThirteens frame mount…
abgeänder für das 7" Display von BigTreeTech Pi TFT70 seiten Arm ist von https://www.thingiverse.com/thing:4430302 Original Modell: https://www.thingiverse.com/thing:4606326
I made this because I don't really need the "tough case" and I wanted the bits easily accessible in a draw taking up a little less room. I didn't find anything that held these bits in this way so I just threw something together, it isn't…
This is a combined 7" BTT TFT70 2.1 touch screen and a BTT Pi 2 , which you can use for 3D printer control, or as an independent computer if you need it. (Software dependent!) Using the dimensions of the "Talp" connector, individual…
This case is for BTT TFT70 V2.1 DSI cable version (Not HDMI) No hardware needed The model has a slim profile and minimal look to it. The case is a tight fit, no screw needed, but if you wish to add some, you can use M2.5 screw holes for…
