Counting matching models…
A mod kit for the TF2 pistol by methanejuice. Please rate, like, and download so I can get free filament and keep making models. Adds: Picatinny rail on the blaster prime, a larger tip, sight, and a larger mag. Aravage Range: 196.55in…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for PETGSource material: PET
In addition to my printer in the enclosure, I also wanted to isolate vibration through the enclosure as well. So I modified the feet for the printer box to accept a 50mm x 50mm square of sorbothane pad. Shopping List Sorbothane Pad…
Print approx. €6.20–€7.57 excl. taxPreliminary estimate for PETGSource material: PET
The sound damping feet can be found here on the US Amazon: 1.25" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive (4, 50 Duro) https://a.co/d/fzzKBZe Make sure to read the weight class suggestions from the manufacturer,…
Printer feet should: Not wobble, be firmly connected to the frame, and support the printer Isolate and eliminate vibrations to improve print quality Dampen noise caused by those vibrations to improve quality of life In addition, if you…
This is a design imspired by the feet designed by Via_the_Verrazzano . I liked the design but really didnt like how the feet in no way mounted to the printer, but the printer just rested ontop of them. This is designed from scratch but…
These are effective vibration damper and noise reducer feet for any 3D printer using 3030 extruded aluminum beams as the frame, like the Prusa i3 MK3S. This was inspired by Plaidbear's design . My reasons for making my own design: I…
I’ve always liked the look of the D3vil Wears Prada printer feet, so I redesigned them to fit the Elegoo Centauri Carbon, with added compatibility for Sorbothane anti-vibration pads. If you’ve never heard of Sorbothane, it’s one of the…
Vhorlath Realms – Season II: Shadowed Empires The Stoneforged Maulthane is a grim dwarf champion clad in heavy armor and armed with a massive two-handed warhammer. Broad, unyielding, and marked by the stern craftsmanship of the mountain…
Foam gun holder. Screwed to the wall, in the form of a latch. Uchwyt na pianę poliuretanową/montażową.
Vhorlath Realms – Season II: Shadowed Empires. The Ironhorn Ramthane is a proud dwarf rider mounted upon a heavily armored mountain ram, carrying the weight and authority of the deep halls into any dark fantasy setting. With a raised…
I have a hard time finding a bit that makes a clean cut in soft polyurethane. This one works well particularly if you add a little lubricant (superlube) so the foam does stick to the bit. Openscad file included with customizer variables.…
Edit2: Added a new file that actually works. You may need to play with the spacing between the prongs that insert into the printer to get a tighter fit. I used some double sided tape to get them to stay stuck. This is a remix of…
These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…
This is a remix of the enclosure feet created by Prusa to allow use for either the 1 inch or 1.25 inch sorbothane hemisphere feet. I found the rubber feet underwhelming. I use sorbothane for the printer itself and it has almost completely…
Bambu AntiVibration Foot This is another Bambu Labs X1 Carbon foot I made in Fusion 360. I made this to be able to screw the foot directly to the printer with a M3x35 screw and washer. It has a removable support for the screw hole. I am…
Remodeled the 1.25" feet insert by @ToddFischer_601780 to have 1.5" diameter for use with X1-Carbon combo with AMS on top of the printer (which increases the weight to be outside the rating for smaller diameter feet at 50 durometer…
Remixed original model to account for a slightly wider sorbothane pad. Used DUR 70 1.5" sorbothane pads. Printed in PETG, but can be printed in PLA or other. Included bambu 3MF with my settings.
For dampening noises from vibrations, print four of these. Stick one Sorbothane damper under each. Fits nicely under each foot. https://www.amazon.com/dp/B00516DL5Y?psc=1&ref=ppx_yo2ov_dt_b_product_details I bought mine from Amazon.
I wasn't happy with the artifacts the original feet were adding to my input shaping measurements, so I ordered some Sorbothane isolation pads as replacement. This print is for a small holder that captures the pads. You'll need: Sorbothane…
Shoutout to evillvi77 and Real 3D Prints for the great designs which made this possible. My finished product used two of Evil's remixed feet and two of my own in the rear. This design enhances the load distribution through the QTY-6…
a small tool for, for example, learning or building
Not a remix, but based on Plaidbear's idea. See: https://www.printables.com/model/83918-prusa-mk3s-anti-vibration-noise-sorbothane-feet I couldn't find half-spheres in-stock, so went with discs. I used four 50 Duro 1" Discs by 0.5" thick.…
These mounts will fit onto the existing rubber feet beneath the Ender 3 V3 SE. They are meant to be used with the 1" IsolateIT! Sorbothane Hemisphere Rubber Bumper . Print the model as shown in the pictures with tree support. For tree…
Works for my Ender3 Print instructions Category: 3D Printer Parts
Bambulab P1P feet designed to hold 0.5" thick x 1" diameter, 50 durometer (3.5 - 7.0lb), tapered sorbothane discs. I picked them up from amazon: https://www.amazon.com/Isolate-Sorbothane-Vibration-Isolation-Circular/dp/B019O5A2EA/ Result…
This project has the goal of teaching you the basics of custom urethane pouring while making some really grippy wheels for the XRP kit! I have attached some images of tires I have made for both this project as well as other projects to…
Overview These feet are intended to be slipped directly over the existing feet for a Prusa XL printer, and over 1" diameter Sorbothane discs to dampen the vibrations from a Prusa XL. It appears moderately effective, although some larger…
Experience printing serenity with our Sorbothane foot adapters tailored for the Creality K1 printer. Crafted to diminish vibrations and mute operational noise, these adapters are designed to accommodate 1.25" (31.75mm) 50 Duro Sorbothane…
FIAT Fiorino a metano keychain. Thank you for downloading my design. Please consider offering me a beer if this helped you! PayPal: @giovannicolo // [email protected]
This is the urethane belt used on the Task Force 90181 10" band saw wheels. This also might possibly fit the Craftsman 113.244513 10" band saw since these two saws are identical looking. Printed in 95A TPU this fits my Task Force 90181…
Designed feet to help with noise. Sorbothane is a strange material and arguably as good as the paver and foam method. Although, I don't have the tools to actually measure. Sorbothane can stain surfaces so that's why there are small pads.…
This is a remix of Prusa MK3s Anti Vibration Noise Sorbothane Feet to mount two Sorbothane dampeners. I have used it on the back of my printer for better performance on a larger/heavier mode at the back. Print Instructions Printer MK3s+…
A mount for the 1 inch Sorbothane anti-vibration pads https://www.amazon.com/dp/B07PF174F5/ref=twister_B07PFXD629?_encoding=UTF8&psc=1 I recommend the 70 Duro if just using 4, if using 6 or more 50 Duro should be better Originally made…
The end plastic for a ProTech polyurethane foam gun. You need to drill the screw hole , so you can put in the screw. Original size 27x27x30 mm. Printed on Neptune Plus, black filament.
Thanks for looking at my first model. I used an 12mm long M3 socket head hex screw and a t-nut. I spaced it far enough away so I didn't have to remove the rubber feet on my SV06 Plus. I have included the step file if you need to modify…
MK3/S You will need the following for each MK3/S foot: 1x M4x10 button head screw 1x M4 nut 1x T-Nut ("TNut_3030_M4") 1x Foot of your choosing ("Foot_3030_XXmm") They will require a T-nut (remixed from:…
Music director had a bell with a broken spring, modeled this after the broken part. Needs a somewhat flexible filament as the part needs to flex. Dialing in the flexibility is key here, may test with different infill patterns to get it…
These parts allow attaching a sorbothane bushing + washer assembly to a 2040 aluminum extrusion. The base is designed to fit in the Prusa Box steel U-channel slots as a replacement for the squash ball bases.
Print 4. Clip one one top and one on the bottom of each end of the belt, with the end extending 3mm, the length of the nibs. Melt both ends as close as you can to the jig without melting the tool. Press them together using the additional…
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
I had some TPU and no Sorbothane so I created some simple models to work with your design and the design that mentioned the larger pads. It really quieted the machine. I printed them with 0 infill and tried both 3 shells and 5 shells. I…
I had to print a new lid for the ordered gas can. The one that came with the can was just broken and unusable. Also a bit dangerous to ship it like that if you aks me. I designed the lid myself and really just tried to copy the original…
A slightly modified version of clough42's version giving a little more support for both single wall and double wall thickness of the MakerFarm Prusa i3 and i3v. Completely redrawn in SketchUp, source files attached. Uses these sorbothane…
Tired of listening to your 3D printer buzz and vibrate its way through another print from the next room? These plastic feet allow you isolate your printer from the surface it's sitting on, quieting it considerably. UPDATE: Added a version…
I had cut up a yoga mat as as dampers for my Ender 3, but after awhile I found that they were flattened. Not wanting to mess around anymore, I thought I'd do the foot thing right and did some research. I ended with the Sorbothane discs as…
A set of 8 labeled ball-and-stick molecule models everyone meets in daily life - from water and carbon dioxide to caffeine and aspirin. Every atom is a sphere in standard CPK colors with its element symbol plus proton and neutron counts…
Methane is the simplest hydrocarbon: a central carbon with four hydrogens in a tetrahedron (109.5 degrees). A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with…
Cups to replace the rubber feet used on a Voron or PrinterForAnts. Uses Sorbothane rings like links below and some adhesive cork to keep them in place on a table…
Ethane is the two-carbon alkane: one C-C single bond with three hydrogens on each carbon. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol…
This is a model that replaces the original feet with adapters for 50mm Sorbothane hemispheres. Sorbothane is a synthetic viscoelastic urethane polymer used as a shock absorber and vibration damper. Sorbothane is incompatible with wood:…
1-Ethoxy-2-(2-methoxyethoxy)ethane (C7H16O3, CAS 1002-67-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. Lay…
Dimorpholinomethane (C9H18N2O2, CAS 5625-90-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Each atom is labelled with its own engraved element symbol: no colour chart needed. Ask students to describe…
Methane (CH4, CAS 74-82-8) — a free educational 3D molecular model for teachers and students, by MolGod.org. Instead of colour coding, every sphere carries its engraved element symbol. A one-colour print of a molecule hides the most basic…
1,2-Dichloroethane (C2H4Cl2, CAS 107-06-2) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. There is not a single ring…
3,3'-Dichloro-4,4'-Diaminodiphenylmethane (C13H12Cl2N2, CAS 101-14-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Whatever the filament colour, each atom reads clearly thanks to its engraved symbol.…
The Methane Sensor is a Zigbee device that watches the air for natural gas with an SGX Sensortech INIR2-ME5% infrared methane sensor. It reports the methane concentration as a percentage of the lower explosive limit (%LEL) and a Red /…
Dichloromethane (CH2Cl2, CAS 75-09-2) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every sphere shows which element it is through an engraved symbol, not a colour code. On a typical printed molecule…
Methanesulfonic Acid (CH4O3S, CAS 75-75-2) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. Colour keys break down in…
1,2-Dimethoxyethane (C4H10O2, CAS 110-71-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour. Colour keys break down in…
3D printable topographic miniature of Thane - 🇮🇳 India Capture the beauty of Thane 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 19.193, 72.976 (LatLng) . It is…
A punch guide for 5/8" biothane to make dog leashes. Created for my dog trainer who loves making leashes but hates punching holes. Snugly fits biothane into guide and makes punching a breeze. Includes leash lead, handle loop and locking…
A punch guide for 3/4" biothane to make dog collars. Created for my dog trainer who loves making leashes but hates punching holes. Snugly fits biothane into guide and makes punching a breeze.
A punch guide for 1" biothane to make dog collars. Created for my dog trainer who loves making leashes but hates punching holes. Snugly fits biothane into guide and makes punching a breeze.
A punch guide for 1.5" biothane for making dog collars
Guide that helps evenly space holes in biothane. Currently set to fit 1/2 inch biothane, but will upload 3/8 inch biothane spacer shortly. The large hole diameter is 8mm and small diameter is 7mm
![[Printer Box] Feet for Sorbothane Dampeners](https://media.printables.com/media/prints/409088/images/3399489_5231780d-fc01-4b4c-b9f6-5fb048f98db0/2023-02-25-11_06_17-photo-google-photos-mozilla-firefox.png)
