162 models
This holder is useful to store your electro-therapy glass tube electrodes and have them ready for easy use. The print is made from PLA. Special feature: The four “legs” are hollow to support four cylindrical case foots made of rubber.
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
This modular massage roller is designed for deep tissue maderotherapy and regeneration after a long day or workout. Each roller head can be swapped out for a different texture – from gentle to intense – depending on your needs. 🔄 ✅…
This is a replica of the ancient Antikythera Mechanism found in a shipwreck near Antikythera dating back to ~200a BC. It is based on a slightly modified arrangement of the Freeth & Jones model with significant inspiration of Wright's and…
This is a Antikythera Mechanism an old technical Greek planetarium clock that allows you to show the movement of our universe.
I have the first generation Theragun Mini and love it! It came with the Standard Ball attachment which works great, but after a while I wanted to try several of the other attachments. However, the different attachment heads each sell for…
I loved the version @Pippa made but wanted to also give the option to pull a zipper if needed, so I added a hook on the other end. It's sturdy enough that I could pull up my jean zipper (sorry about that POV) lol. I wouldn't go yanking on…
print 2x the side and 3x the pins to be able to print without needing supports. I just used super glue to combine the parts. I have also included the tool as a single model, as that was how I first made it
Keychain of Physiotherapy symbol: two interlocked snakes with a lightning in the middle. The snakes and the lightning were modeled in three different heights, giving a clearer perception of entwining. Modeling: Fusion 360; Slicer: Prusa,…
I designed this little buckle to make it easier to work with Therabands. You can adjust the length of your loops with it without using any knots. Just fold the Thera band a couple of times so that it fits into the buckle holes and wind it…
Vectorized models extracted from bibliographical references on general anatomy, cited in the speech therapy undergraduate course. Consisting of eight parts, being: Epiglottis Aryepiglottic fold Oblique aryepiglottic muscle Cuneiform…
button aid - helps close buttons for people with arthritis or limited use of their fingers. prints in 30 minutes no supports
When I built the original device the moon didn't stay in place and would fall out. I modified the moon hand so that the moon is held firmly in place.
A convenient place to store your theragun mini when not in use. Print Settings Printer: Prusa MINI Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: Overture PLA Matte Black Notes: Made to print flat on the back of the model.…
Es ist ein Remix von 6mm Doppelt Thera Tube Silber auf einfach 10mm Thera Tube Silber .
The missing spacer for the B axis.
This is a cover that fits on the"300ML Diffuser Essential Oil Diffuser" Amazon.com: 300ML Diffuser Essential Oil Diffuser Remote Control Aromatherapy Diffuser Mist Humidifiers with 7 Color LED Lights for Bedroom Office House Kitchen Yoga…
Antikythera Chronos Masterpiece Spinner V2 Un spinner que pone en movimiento su propio Cosmos El Antikythera Chronos Masterpiece Spinner V2 es un spinner cinético de 130 mm de diámetro inspirado visual y mecánicamente en el legendario…
PP01 Massage Gun Adapter for Theragun Attachments Overview This adapter is designed for the PP01 Sharper Image Compact Sport Power Percussion Massage Gun . It enables the use of various Theragun attachments, enhancing the versatility and…
This model allows the quick and easy attachment of any Vac-U-Lock accessory to a Theragun hand-held massager. It incorporates a retaining clip designed to keep the adapter in place. Based on the compatibility of the available accessories…
Print without raft or supports.
Heavily inspired by tylerj714's Speech Therapy Blocks My wife, an SLP, liked tylerj714'blocks. I suggested making the blocks thinner so we could fit more on a binder ring, and she requested custom icons that would match the communication…
Decathlon EASYBREAH SUBEA old – files without suffix in the end Decathlon EASYBREAH SUBEA new – files with "rect" suffix Subea Chinese clone – files with "small" suffix Airtight Includes 2 models per mask – for 2 separate channels and…
Bach-Blütentherapie Aufsteller, Display, oder Ständer. Farbenständer für kleine Revell Farben oder ähnliche kleine Gefäße. Die Ständer sind teilweise mit einem Butterfly Verbinder ausgestattet, so dass man sie erweitern kann.
This interactive 3D-printed maze is designed for therapy and skill development, particularly for children and individuals with visual impairments. The goal is to move pegs through the maze to reach the finish. Pegs can be moved by hand…
When my dominant hand got sprained in a fall, I couldn't reach my shoulders and back with the Theragun Mini. I created this adapter that accepts any paint brush, broom or squeegee handle that has a 3/4" 5 TPI ACME threaded tip. I had to…
A digital kitbash head design I made in Blender. It's based on the Lion Posable Toy. It's not the best but not the worst. You will need to add supports to print it.
Esta base con 9 orificios esta diseñada para trabajar ejercicios de prensión con los dedos. El diseño esta basado en el 9 hole peg test. ----------------------------------------ENG---------------------------------------- This 9-hole base…
This is a spacer that secures a Polarstar Kythera HPA engine to the alignment nub, removing back and forth travel as well as preventing some rotation. Print 2 copies, one for each side of the gearbox. This spacer is secured through…
I'm in the process building FreddyZ 's amazing Antikythera Mechanism , and I realized that the countersinks on the bottom of the mainframe are on the wrong side. Several people in the comments noticed this as well. This model moves them…
The provided attachments for the massager are too small to transfer a lot of energy to big muscles, and they are too hard to work near bones. I designed this to take a pad of foam and thus do both tasks - primarily useful for leg muscles.…
Multi color by layer height the Lutheran seal of Martin Luther. Color order is yellow blue green white red black
Tired of shaking paint bottles? Unleash the power of percussive mixing! This 3D-printable paint shaker attachment turns your Theragun into a paint-mixing beast. Simply attach, blast away, and get perfectly blended paints in seconds. 1.…
14MM Missing E spacer for Antikythera Mechanism by FreddyZ
This remix provides a shorter version of the “d1 gear and axle” that is part of the “Orange D-Axis and C-axis” folder for the Antikythera mechanism. When I assembled my clock, I found that the d1 axle stuck out the back of the D2 gear and…
When I built the wonderful Antikythera Mechanism, I had some problem installing the heat inserts into the feet. My heat insert tool was too clunky and try as I might, I could not install the heat insert without melting the rib. You can…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The holder is a nice storage for 40 phials with a diameter up to 25mm. The expensive phials are stored quite secure and the type remains still well readable. It's designed to print without supports: Print all parts once (1x top, 1x…
While designing a paint mixer adapter for my theragun, I thought it might be useful to share the most basic adapter model with all parametric details so that others can remix their own theragun massage/vibratory attachments. This is a…
Holds 5 Theragun tips. These tips are from the Theragun elite (in case the different models have different sized attach points).
Used to further stabilise the barrel within the shroud, or to stabilise a traditional hard barrel within the spacer
Print this in Nylon (nice soft surface feel). Stand it up vertical on one end with supports from baseplate only. The wavy inside coutours tend to contain the knot in the Theraband so it doesn't slip out.
Can be used to mount the fan up to an Camara Tripod
this is a rough approximation of the appearance of a head fixator as would be used in a hospital during radiotherapy procedures. Normally these are custom made by radiologists by forming a thermoformable plastic sheet over the patients…
Designed for 225 LED / 45W 660nm & 850nm light panels that measure approx. 12"x12"x1.3". The stand is small, easy & fast to print, and uses little filament, but holds the light in place very well.
You want something personalized like me? I added the initial of the first name in the mouth of the panther. If you too have a name that starts with an A, this pattern might be for you... Printed with PLA Silk Gold from Azure Film. Infill…
This a recreation of a Proton Therapy center intended to be utilized as a playset for children to learn about and normalize their hospital experience.
I recommand the same print settings as the original modal. Also use strong clue to attach the models together. Disclaimer: I'm in the process of printing the complete model myself. Asof writing this I haven't tested these models with the…
Print with connector bit down.
This case holds the 1st gen Theragun Mini, protecting it from damage. I plan to add a version for the slightly smaller, 2nd gen mini. It uses 4, 6x3mm magnets to hold the case closed, but you may want to add more. I have included the…
The Stop It dice are the solution to all of your therapy needs! Every time you have a thought or action you do not like, simply roll the dice and do as instructed. All six sides say "STOP IT!" so every roll can be helpful. The letters are…
This date dial complements the Antikythera mechanism model made by FreddyZ ( https://www.printables.com/model/284372-antikythera-mechanism). It can be attached to the front frame using three M3x8 screws. Heat inserts are optional. Print…
A simple Tinkercad design for a hand therapy tool. Two knob sizes, 8 cm and 7 cm. Print on its side and with several perimiters for greater strength. See 3mf file. I had good results with PLA.
I recommend printing this on a textured built plate so it ends up with a nice stippled texture on the front. Includes a hole for a small fee grub screw but the tolerance on the main hole should be enough that it won't move
Hello, these are side supports for Simgrade Thera pedals. However, it should be noted that I made these for my feet/shoe/rig, so you may have to modify the model a little to suit yourself. Also note that you have to change slightly longer…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is 3d-printed housing developed by me for High Power PEMF Therapy Device https://www.hackster.io/mircemk/simple-to-build-high-power-pemf-therapy-device-f38d46 developed by Mirko Pavleski Extra parts, that you need: 2 pcs of IEC C14…
Flexible basket for IV therapy, printable with nylon-like filament. Easy and very quick to print.
This is a wooden pattern for laser cutting that works like the Antikythera mechanism. Each image is 25cm in size, and requires a lot of 5mm wooden rods. There is also an explanation for each image. You will also need nested rods of sizes…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
A device to help work out fingers in the physical therapy
This is a dumbbell meant to be used with a Theraband/resistance tube that you can buy like this:…
Nothing fancy, just a round object to lay on to apply pressure. Similar to a roller or a ball. This shape is pretty aggressive so I recommend using a towel to blunt/soften the shape at first. It can be used anywhere. I made this for…
Hy there, Added one for a 15mm Laser pointer and one for a 16mm Laser pointer (Pearl) I designed a hair hoop which fits a laser pointer. my gf uses it as therapy tool for patients, they have to move their body accordantly without moving…
I don't have a vortex paint mixer, but I do have a Theragun massager, so I created this attachment so I could use the Theragun as a vibrating paint mixer for my Monument Hobbies Pro Acryl paints. Sized for their standard 22ml bottles.…
A key-holed peg board with box and pegs for Occupational Therapists to use for wrist motion exercises. 16 holes on the board in random rotations require the patient to use a variety of different angles. Two different peg shapes are…
The famous cubes-on-elastic-string puzzle, now customizable on your 3D printer. Either print the provided STL or customize it the way you fancy it. Printing is easy, no support or post processing required and the chamfer at the bottom…
I bought a therapeutic ultrasound machine from eBay and wanted to know if it really produces the claimed power output (it does). It's supposed to provide up to 3.4 W/cm^2. The transducer is claimed to be 1 inch diameter although the face…
I have severe CPS (Carpal Tunnel Syndrome) that resulted in severe tendonitis in my wrist and arm. One of the exercises that the physical therapist recommended was twisting my arm while holding onto a handle attached to a rotating disk. I…
See images for details. We have found this to very useful and have been using clinically for the past 6 months. If you can't print this yourself, you can order from printing service on Etsy.…
Aromatherapy Oil Holder. Holds 10 small bottles. Lay on it's back to print without supports
these are used for play therapy
A small spring that helps you heal an injury in your hand, or just for fun.
Armored Panther Tank – 3D Printed Mech Animal Statue – Sci-Fi Combat Panther Figurine
I recently had some hand surgeries for trigger finger and carpal tunnel. At physical therapy they had some tools similar to this made of polymer clay. They worked but seemed to me to be an easy thing to design and print so I made them…
simple adapter from theragun to some cheap attachments from Amazon (Uk. Link: https://www.amazon.co.uk/dp/B0CG9FQG97?re)
This is a recreation of the “Yogahands” physical therapy device. An organist colleague asked me to design this, as it is incredibly helpful to him but the Yogahands product seems to be no longer available. While I make no claim as to the…
This is a paint shaker for mini paint cans by TESTOR. Designed to shake, not stir, and keep the paint inside the can. Approx. 25mm wide for similar style jars? Adapted to a Theragun style attachment, it should work universally. Use at…
From platitudinous to pulchritudinous, your aromatherapy diffuser could be epic like mine! The vapor completes the gastly. Video of design, build, and final result (it's 47 seconds. like and subscribe):…
Celebrate their victory over cancer with a 3D model of Cisplatin, one of the most powerful chemotherapy drugs. Print with supports for best results.
Now you can have your own Theranos Nanotainer. Print the cap out of TPU and fill the body with something red, I used nail polish. Note: Not for medical use.
Wrist and forearm pronation/supination tool. Ribbed handle for grip and comfort. Includes a grooved channel around exterior for wrapping the tool in therabands, theratubes, straps, etc. to add resistance to the exercise. 8cm depth…
Panthera X wheelchair sideguard lock + pin witch hole for wire
a simple Tire shaped air conditioning aromatherapy
It's not inherently a 2-color model since I don't know how to do that, just add a color swap at the right height (4mm). Let me know if you want any additional magnet options or anything, it's easy to modify.
Tea Tree Therapy Mint Toothpicks case
Made by Shapekit. 3D viewer, colour preview and more free models: https://shapekit.cc/antikythera.html A model of the oldest known geared computer, found in a shipwreck off the Greek island of Antikythera and built around 100 BC. Turn the…
I recently injured my wrist and needed to go to occupational therapy for a few months. One of the exercises my therapist had me do was bending sticks. This exercise that involved the sticks was two parts. First, take the edges of the…
Literally just holds the basic 3 tips for theragun mini-- measurements should allow a snug fit
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Created for a physical therapist working with children aged birth to three with special needs. Paused the print half way through and added 12 grains of uncooked rice. Pictured are two 70mm tall rattles. A shorter, 50mm tall rattle is also…
therapy handle system for shoulder with this you can do some exercise when having some problem with e.g. the shoulder. Check also my other designs: https://www.printables.com/social/201278-hans/models
My first ever model! I designed this wall mount for my girlfriend so she can put her hair iron next to the desk instead of putting it in a drawer somewhere. Be aware that the irons can be hot and need to cool down! Printed in PLA+ and…
Found a cool sticker on a shop (https://rubashka.us/collections/frontpage/products/mkultra-psycho-therapy-sticker-pack)
Designed based on real-world requirements from a nursing home. structured and safe storage for aromatherapy bottles and related accessories used in daily care routines. Features: Holds 8 small bottles (5-10ml) Holds 1 larger bottle (30ml)…
Evangelical-Lutheran Church in Württemberg is a detailed architectural 3d print model of a real Lutheran church building, ideal for fans of German church architecture and historic ecclesiastical models. Use it for dioramas, tabletop…
It's the Therabody logo. Pretty simple. Have fun!
This is an attachment for the MUI Telescopic handle for performing Rotator Cuff stretches.
