Counting matching models…
Summary Bottom cover to protect my ST-Link V3. Print Settings Printer: Original Prusa MINI+ Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament brand: Prusament Filament color: Lipstick Red Filament material: PETG
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Cover for STlink v3 with mounted adapter PCB to protect the electonics. Part List: - M3 18mm cheese head screw
The cover allows users of the new STLink/V3 to attach the expansion board. Original cover isn't suited for this extension, thus a new cover was designed and tested. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter…
I was not happy with the case ST designed, so I made my own. It was printed on a Prusa MK3S+ with 0.2mm layer height. It is quite a snug fit. The case is secured with a M2x4 countersunk screw. A dab of glue or a short piece of filament…
Sleeve for STLINK-V3MINIE . Prevents unwanted shorts. It holds only by the power of will. The will of the USB-C connector, that is. Not to be confused with STLINK-V3MINI . They are two separate things.
Ich war es leid immer die Trinkblasen nach einer Mountainbike Tour reinigen zu müssen, also entschied ich mich einen Adapter zu kreieren. Nach dem drucken muss ein Schlauch an der Innenseite (Schraubseite) angebracht werden, welcher bis…
STLINK-V3 MINI comes in tiny package, but lacks proper enclosure.
Hi, this is the case for STLink-V2 programmer which is part of STM32 NUCLEO boards (64 pins or 144 pins). The programmer can be separated from the board and used as standalone device. All available pins are exposed (SWD port, TX, RX, GND,…
I wanted the original cover with my ST-Link V3 enclosure. This allows you to just use all your existing back plates and keep your cool serial numbers. I included my STEP files of the reverse engineered enclosure. you can also get them at…
The enclosure is easy to print and requires four M2*4 screws. The text on the top shell can be printed with printers such as Bambu Lab. Alternatively, the text can be left unprinted.
STLink V3 back cover replacement
Cover for STlink v3 with mounted adapter PCB to protect the electonics. Other than with the original model this one does not require an additional screw to attach it to the upper part of the housing.
The case is easy to print and requires 4pcs of M2.5 x 12mm screws ( link ) and 10pin 2x5 connector (I used an old one from a fake and useless stlink v2, but here you can buy a new one: link ). With this type of connector soldered to the…
This is an over-designed lid for Ratiafak's case for the STLink v3 Minie. (As Ratiafak says: Not to be confused with STLINK-V3MINI. They are two separate things) The blender file includes Ratiafak's case (converted from the original STP…
TL;DR STLINK-V3MINIE to 2.54mm pin header adapter Target power supply with 5V and 3.3V 3.3V supply is adjustable via resistor divider Current limiting with LED indicator 3D printed case Open hardware: all files available Introduction I…
The WetLink Penetrator Assembly Block helps you assemble the WetLink Penetrator with ease by holding the bulkhead while the plug is tightened. It has three cavities to hold different sizes of bulkhead: M06, M10, and M14. We recommend…
Edit: Added version without keychain addon and my .blend file A simple remix of the cool model by mirabatek. My changes: uses M3 screws instead of M2 chamfered edges instead of rounded (better suited for 3D-printing) open holes for GND…
I made jointlinks for 6mm rods to connect each other and between. Cause for this design is an Ornithopter-Project I'll probably never gonna finish. XD So if you just want to connect 6mm rods with 270° movement - this is your design. ^^…
Na brusinky on cranberries
This is a shield to separate the ADS-B radios from the GPS receiver in a Stratux GPS / ADS-B receiver. These UBlox GPS receivers are fairly well shielded, but I have found that the additional shielding helps a bit. Designed to fit in the…
má Ačokča potřebovala podporu, špejle v substrátu byla nestabilní, snad jsem našel řešení, základna je 67 x 67, kroužek průměr 30mm ve výšce cca 50mm
A two-part case for the ST-Link V3 MINIE (MB1762) debug probe that also works as a solderless adapter : it connects the probe's card-edge pads (CN2) directly to standard male Dupont jumper wires. No soldering, no special connector needed…
Case for VoltLog's VoltLink USB to serial adapter / programmer. Required hardware: VoltLink revE board (I'm not sure if other revisions are compatible) 4x M2.5 x 3mm threaded inserts 4x M2.5 x 10mm screws A variant bottom is provided that…
Give your favorite memories a stylish upgrade with HeartLink , a unique 3D printed photo frame featuring a creative combination of circular and heart-shaped elements. Its modern, minimalist design makes it perfect for bedrooms, desks,…
This is a rugged box for the STlinkV3-SET with @ShinobuTezuka_753055 s awesome STLINK-V3SET Spacer Plate With Pin Protector and 2mm Shrouded header model. The box insert is split into two parts. The top part holds the STlink and the…
If you are having issues using the existing O-rings, try these for size. Designed to work with the M10 Wetlink Penetrators sold by Blue Robotics. Pour in your material, let it solidify, and then cut out the newly made O-rings! Designed…
The two wheels supporting the main litterbox ball seem to be structurally weak. Printed this push-in supports for them. I recommend printing shaft horizontally with supports enabled.
Description This is a custom enclosure designed for the STLink-V3MINIe programming tool. It features a 2.0mm pitch connector/terminal to break out the essential pins, making it much easier to connect to your target boards during…
I had to modify the top cover slightly because the ST-LINK/V3-MINI I own uses a wider connector. As a result, the connector opening in the upper shell did not fit my programmer. I therefore adjusted the top part of the case to accommodate…
Whats the point of this module? Well, this module takes in 8 signals and sends it over an ethernet cable (shielded to avoid ground loops and humms). It outputs the signals through a second identical module. keeping the synth space tidier,…
It is a case and holder for Smartlink device and adapter USB-A to USB-C. After printing it, you simply put the Smartlink device with the adapter into the holder. Printing instructions for Prusa Core One: PLA; Speed at 100%; Fill at 15%;…
Bottom half of the case with sealed hole for STDC14 connector, if not used, this protects against dust, damage, and ESD.
I created this set of color coding attachments for analog audio over lan cable units like Thomanns Cat Snake or Pronomics NetCore system (these both units are identical in mechanical and electrical perspective). The plate covering the…
The two wheels supporting the main litterbox ball seem to be structurally weak. Printed this push-in supports for them. I recommend printing shaft horizontally with supports enabled.
I created this set of color coding attachments for analog audio over lan cable units like Thomanns Cat Snake or Pronomics NetCore system (these both units are identical in mechanical and electrical perspective). The plate covering the…
I never liked having it flop around on the usb-c cable. I haven't made a lid because I don't really need one. Printed in PolyMaker PolyTerra Red PLA. Low infill. You need 4 M2x6 (ideally) or like me use 4 M2x8 with two washer on each…
