Counting matching models…
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . This is a remix of Cube-Maker's…
Edit of the original design to have a perfect fit for your average printer. hole on the arm is designed to fit a spru snipping. all i did was edit the size of the hole on the arm for better tolerances, after 2 test prints it fits perfect…
I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…
The original model was great but I found that I was having trouble getting the screws to grab the nuts so I made some tolerance adjustments to allow them to grab better. If you are having this issue, here is your solution. Simply replace…
LEGO Technic Parts (Perfect tolerances!)
I had difficulty assembling the original jig with the suggested pogo pins, as the holes were too tight when printed with PETG. I added about .45 mm to the diameter of the holes in the jig, and sunk the screw holes in so that the original…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
I really enjoyed the original model by Severeon , and I wanted to print it for a friend. However, I found it a little difficult to assemble without my tools (I'm just not sure what tools this friend has available to them), and I didn't…
Quick remix to include sizes for stock AMS for those of us that don't have the Hydra. These fit and spin better than the originals. Add more height clearance in your stock AMS. Print 1 roller and 2 sockethead casings each. Uses two M3 x…
My 3mm Rods did not fit right so I made the holes a bit bigger. I also combined the motor connector to the carriage so you don't need extra work for yourself. Print instructions Resolution: 0.2mm Infill: 20%
Protects your 9V batteries and keeps them from accidentally shorting when transported! Now with better tolerances for the lid and batteries. Print instructions Category: Containers Print Settings Printer Brand: Prusa Printer: i3 MK2.5…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
I had a slight issue printing the original one as the threading would not fit my strain relief so I quickly increased the tolerances and now the PG7 fits well.
For best results, it is recommended use some lubricant and/or use more slippery materials for the leaves, but it still works fine without any lubrication. This design uses the same leaves as the original.
Case for MRA193A USB type C power delivery (PD) trigger board, available for very cheap on sites like AliExpress, eBay, etc. Uses minimal filament and snaps together easily. I printed it in PETG with variable layer height and "standard"…
Wing, winged, thumb or butterfly nut knob to perfectly adjust the parameters and tighten the tolerances down :) V1: Modified original prusa knob (MK3S) 15.07.2022: Added V2 - redesigned clamping geometry for various potentiometer heights.…
i had an issue with a to loose steering link that is when i made this change that made the tolerances higher
I liked the improved rollers @humebeam posted, but I was having some real issues with them functioning properly: They tended to rub against certain slots in the hydra which reduced their rolling smoothness (e.g. second from back slot…
This is a remix of the Portable cable winder with larger gaps between the print in place parts.
After receiving feedback from some people on the first version of this mechanical iris that the tolerances were too tight, I have now created an adjusted version of the model. This way, even those with less-than-perfectly calibrated flow…
The bolt was designed with a large tolerance of about 0.45mm so it can be printed on pretty much any printer. My Ender 3 has absolutely no problem printing it. Settings Supports: None needed Infill: 5% or more Layer Height: Any It can be…
This is a storage box that looks like a gold bar. It has a sliding lid and fits small to medium Allen wrenches. There are two versions included, one with loose tolerances for the lid and one with tighter tolerances for the lid. If your…
The tolerance on the original latches are too tight for FDM printers. The hole diameter is only 3.2mm (close fit), but even my Bambu P1S can't accurately hold that tolerance. As a result, moving the latches will rotate the screw itself in…
The original treasure chest puzzle box was a great design, but having to sand the parts was a drag. So some of the interfacing elements were tweaked, and now sanding is no longer required. Note: the top frame may not be a tight fit with…
the label spot was made less tall to fit another gridfinity bin on top properly
Liked the original, thx for the upload Printess … however, after printing had some issues with it so I reworked it for myself and decided I would post here in case it helped others: Easier more enveloping fit front cover no glue stays…
Threads that work are a bear to print, especially when you use Fusion 360 and only have the ISO standard metric sizes to work with and no ability to customize. Usually we resort to threading our model and then scaling it or some equally…
A tighter fit on the rail, reduced pretty much all of the side to side wobble Category: Hobby
Bambu Hotend holder with mounting locations. Tight Tolerance.
Greasing the toggle's tip and the cylindrical joint will make it 100 times better!
READ ME There are a few important considerations/tips/changes you'll have to make to accommodate the BexGears kit. This applies to both the original BexGears Prusacaster model as well as this remix: The BexGears bridge is ~6mm closer to…
Print face-down. You can get the spacer from the original upload.
Thanks to https://www.printables.com/@mkoistinen for uploading the source so I could modify it!
First of all, thanks @OnceinaSixSide for this amazing model I was getting holes for the magnets with 10mm x 2mm, which is great, except I still need space for glue. I remixed the original to improve tolerances for my printer I also wanted…
Printed the orignal and modified parts in standard sunlu PLA on Bambu A1. Applied some vaseline to the parts that slide/rotate on each other to make it even smoother. FYI, this gearbox can only be spun via the input (smaller) shaft which…
I am quite happy with this current version. The changes work well and the card doesn't rattle around like crazy anymore. If you use your card for NFC card readers the Yubikey's NFC chip might mess with the reader because both the card and…
Designed from scratch in Fusion 360. File .f3d provided. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: BQ PLA Pink Category: 3D Printing Tests
My parts didn't fit together, so I make the toleraces bigger.
I have shortened the depth of each of the holes in order to make it easier to remove the bits. Printed in TPU.
The tolerances were to tight for my Ender 3v3 se so I remixed the original to make the filament actual fit into the hole
The purple one is the one printed with final tolerances Printed in PLA No supports 15% gyroid infill
Battling the bothersome base of the Hextraction board, I faced fussy forcefulness that turned threads to tears. Curious about the original creator's chosen clearances, I concocted my own clever counterpart: an M7 x 1mm threaded treat,…
Tighter tolerances for the 8mm rods so they stop “singing” when the extruder carriage moves up/down.
Original model by Hdm has a tolerance of 0.16mm and it's a really tight tolerance for a lot of people. So I just modified the chdobahacek_ukotveni_mk3_60mm.stl part and added looser tolerances. I printed the 0.25mm version and it was an…
I liked the original Nespresso capsules holder, but it didn't fit my capsules
Keystone geometry based on domrim's design. This is intended to be used in your designs, not standalone. You should be able to merge this STEP file into your designs and have a fully functional, tight lockup, and properly reenforced…
better tolerances for easier release of arms ;-)
Remix of the awesome spice rack pullout model. The narrow version ist very similar to the original but with optimized tolerances, improved top connectors, open top and M4 screw connection The wide Version is additionally wider (and…
If you like this model leave a “like” and download it, and also post your make ;) And don’t forget to like the original model too to support its creator ! Resolution : 0,2/0,16 mm Walls : 2
Remix from cmh's great remix of UCI's new brake lever inclination tool. Had problems with fit between the sliding parts, with my printer and setting had play between part 2 and part4 so measurement wasn't accurate. Removed sharp edge and…
I wanted a fidget toy and wasn't satisfied with the sloppiness of the existing models, so I recreated one in OpenSCAD and added optional magnet holes. The STLs are examples for 3x4mm magnets or without holes, I've printed the shown…
This is a work-in-progress ! This is a remix of the base wall tile from RostaP's Honeycomb Wall Storage system: https://www.printables.com/model/152592-honeycomb-storage-wall The original model was easy enough to print, but had too tight…
This part fits with the original CV gear housings. I improved the gear hub in various ways such as press fit 0.15mm tolerances because it was originally far too loose and destroyed my gear housings. I also added the rounded edges and…
Great Model, but made tolerences tighter to hold the battery more snug
Increased tolerances for a looser fit.
Remixed to widen the retention tab slots since in PETG they were sticking to the sides. Added .5mm on each side of the tab since there is plenty of material around for structural reasons and the tab stays the same size. Filament in the…
Improved version of the original design by Kilian. The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the…
Original has 0.2mm tolerances, this one has 0.1mm (80% scale print)
This is a remix of the Ultimate Gridfinity Drawers 3x4 rack with looser tolerances for the drawer rails. With larger line widths or layer heights it's possible to print the original models and have <1mm rails, which then means lots of…
Tighter tolerances and a slot that fits aliexpress cheapo blades (5 * 2.5 mm)
Gridfinity Refined Plate-to-Plate with tighter tolerances Default tolerance was 2*1.2mm, current is 2*0.1mm, distance to next plate has 0mm offset since it has enough room to move around a little. Plate is being also lowered by 0.4mm to…
Wheels for life counter for board/card games like Magic The Gathering/MTG. Different tolerances to fine-tune fit.
Best printed in PLA, print pieces separately, 2 pieces come in 1 file.
The rubber bit for these files seem to vary a lot so I decided to remix the model to add larger holes. I also made it so the honeycomb insert fit perfectly for my setup.
I really liked Derek's model of this filament guide, but it wouldn't clip onto my MK3S with a stock 6.35mm thick frame. I just added a rectangle negative space modifier into the slicer with slightly bigger than the exact dimensions of the…
Interlocking hexagonal storage cups for organizing boardgame parts or small items on your desktop/workshop. Following the original model's conventions, I've added 0.25-0.50 mm tolerance versions along with matching testpieces. The design…
I could not find a fidget toy with adjustable tolerances, so I built one. Adjust the diameter of the toy, the height of the toy, the size of the key ring, the space between each segment, and to a lesser extent even the number of rings in…
pick a proper spacer, you might need this:
I remixed some parts that needed bigger tolerances for easier assembly. I needed a lot of theese and it was really painfull to assemble with holes that are 0.1 mm smaller. Now those holes are 0.1 mm wider (0.1 offset on every side) and it…
I found that the tolerances in the standard files resulted in a very loose fit with lots of play for my printer. To solve this I expanded the male end of the dovetail joints on the cases. 0.2mm expansion worked best for my setup (Bambu…
The original model has very tight thread tolerances. I corrected it to make it easier to assemble the spool. I also added small holes that you can use to screw in the guide lock part - you can use your caliper if you don't have the…
You can make your own using: https://michalmietlinski.github.io/adapter-generator/ or use my repo https://github.com/michalmietlinski/adapter-generator | Vac side (hose) | Tool side (port) | Vac end | Tool end | Covers | | 35 mm | 27 mm |…
Got tired of my bad, imprecise and plastic tamper that came with the machine so I made a good, precise and plastic one.
I loved the idea, but while the original remix did snug up the rods, made my z-tops bend up a bit. I reduced the extruded section until the tops were square with the frame. Mainly for aesthetic purposes. Still clamps the rods nicely. #ocd
This is a remix of the battery cap for the Rollei XF 35 camera. It includes two distinct versions designed to replace lost or damaged original battery covers, featuring tweaked and improved thread/locking tolerances for a smoother fit.…
This is the original “intake_v2_120” shroud part that is contained in the “120mm/140mm Desk Fan (Updated)” origin model, where only the V2 120mm “Intake” part of that original model has been modified (in Fusion, using the “Configuration…
Summary This is a customizable snap-fit pill box, perfect for organizing daily medication. I designed it to be printable in Glow-in-the-Dark PLA so it's easy to find in the dark! This project includes 4 main versions of the lid, each…
This is the original “intake_v2_120” shroud part that is contained in the “120mm/140mm Desk Fan (Updated)” origin model, where only the V2 120mm “Intake” part of that original model has been modified (in Fusion, using the “Configuration…
Hexa Lantern by Xinfinum with higher tolerances and slight upgrades
Partially due to the hardware I have on hand, maybe partially due to my printers accuracy, I had a really hard time fitting the pins of the carriage. It turns out that the whole belt/clip/tube assembly stuck out ~0.6mm from the back of…
Improved version of the original design by Kilian. The standard tolerances were too tight for my setup, so I refined them and modified the shape for better durability and easier mounting. To detach/remove the hook, you need to press the…
Summary This is a customizable snap-fit pill box, perfect for organizing daily medication. I designed it to be printable in Glow-in-the-Dark PLA so it's easy to find in the dark! This project includes 4 main versions of the lid, each…
Interlocking hexagonal storage cups for organizing boardgame parts or small items on your desktop/workshop. Following the original model's conventions, I've added 0.25-0.50 mm tolerance versions along with matching testpieces. The design…
Print face-down. You can get the spacer from the original upload.
This is the original “intake_v2_120” shroud part that is contained in the “120mm/140mm Desk Fan (Updated)” origin model, where only the V2 120mm “Intake” part of that original model has been modified (in Fusion, using the “Configuration…
This is the original “intake_v2_120” shroud part that is contained in the “120mm/140mm Desk Fan (Updated)” origin model, where only the V2 120mm “Intake” part of that original model has been modified (in Fusion, using the “Configuration…
First of all, thanks @OnceinaSixSide for this amazing model I was getting holes for the magnets with 10mm x 2mm, which is great, except I still need space for glue. I remixed the original to improve tolerances for my printer I also wanted…
Wheels for life counter for board/card games like Magic The Gathering/MTG. Different tolerances to fine-tune fit.
This is a remix of the Mechanical Dice Box. I just changed the tolerances. Category: Mechanical Toys
My fixed stock was too loose, so I decided to remake them with tighter tolerances and a hole to stick a pin through.
![Rollei XF 35 LR44/SR44 Battery Cap Adapter (Improved Tolerances) [WIP]](https://media.printables.com/media/prints/627a30a7-7ee4-4b57-a0af-a2dc31cde9d0/images/13553696_774a7184-10a2-492c-919c-37905c7318d8_d2428551-2e48-43f2-8116-812ca17852bc/viewcapture20260811_142616.png)
