Counting matching models…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
I needed a calibration model to verify my maximum print speed without sacrificing too much quality. Made a quick one and it works pretty fine in my opinion... Basically it is a cube with chamfers, sharp corners, a hemisphere and…
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…
Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.
A clip to hold a towel to a beach chair.
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
I made yet another temperature tower because I couldn't gauge how smaller details were affected with other temperature towers on Thingiverse. Printed in PLA, it only uses about 4 grams of filament. Each section is 10mm tall 4/4/21 Update:…
The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Store 2 to 10 Nintendo games in a stack, so you can read the labels easily. I designed this in order to be able to print it on a small bed surface like the Prusa Mini: this is why you must print it upside down and not on its back.…
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Just download the G code and print!
Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print
The Ultimate Double Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a…
I couldn't find a “key” that had both parts on it, so I sketched this one up
Gringotts Bank Dice Tower - A cool dice tower I found on Thingiverse I added in a little extra support on the back nothing to fancy just to help it print a little better. The STL file is not scaled up but should roll a standard D20 just…
Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.
I couldn't find a temperature tower I liked because I normally use between 210 and 220°C in PLA. I did not find a simple tower that gives me idea of stringing, bridge and surface in the temps I wanted unless starting at very low temp.…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
A simple towel holder that allows you to hang a hand towel to a cabinet or vanity door. Printing There is nothing special about printing these. No supports. 20% infill is fine. I personally print with 3 or 4 perimeters to add a bit of…
A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…
This Tiny Tower helps you print good-fitting parts. No more need to print multiple gauge blocks to find the required clearance. Tiny Tower does it in 2 parts. A 5.7 degree taper angle works like a magnifying glass. It magnifies the…
This coozie comfortably holds a standard soda can and two d20s. Pictured version was printed on an Anycubic Mega S with: .2 Layer height 3mm brim 15% infill .4mm nozzle Supports
I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…
map of Prague's historic center -wall mount 2 piece glued together source https://www.geoportalpraha.cz scale: 1:5000 size: 147x159x15
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
M104 S260 ; set the current hotend temperature to 260 degrees Ender 3v2 neo
A very strong towel clamp hanger. Print with 0.1mm layer height and 4 perimeters. Use PETG. After printing let the part cool down. Then twist the clamp in its final Position.
Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…
This is a part of the Ford S-Max (originally 2015-) stowage box, but may probably it may be also used with other Ford models. The original one is easy to break and if it's broken then the entire part has to be replaced, which is a bit too…
Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…
Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy
A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.
Krytka tažného zařízení. Towing device cover
A modular tower designed to hold stackable boxes for efficient storage and organization. Each box fits snugly into the tower, allowing easy insertion and removal. Perfect for organizing tools, stationery, or small items. The tower is…
Clip for hanging towels, hole diameter 17 mm. / Spona na zavěšení ručníků, průměr otvoru 17 mm.
I love to play with shapes to see what kind of patterns I can make. Then I just have to dial it back to something that is printable.
Easy to print holder for towel. Use PETG so it is stronger, but PLA is also possible to use. Brim is not necessary but if its not holding on the plate then use brim. Use 0.20 layer hight with 25% infil and 2 perimeterrs. Here is video on…
Description The game challenges players to stack dice to form a tower, offering fun for both children and adults. 21 (or more if you print more for harder challenge) dice are evenly distributed, and players take turns rolling no more than…
Town token in Spirit Island board game.
This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…
It is introducing the latest tabletop gaming accessories: the Teddy Bear Dice Tower! This dice tower is not an ordinary game piece but is crafted with the finest 3D-printed fluff technology. Picture this: you're gearing up for the…
Simple Rotatable towel hooks, could be fixed with simple nails or screws, no supports required
Circular Towel Holder with a flat backside for better adhesion.
Not-so-simple ratcheting paper towel roll holder! With optional guide arm! Print either the ROLL_BASE_NOTCHED if you want guide and ROLL_BASE_SOLID if you don't want the guide arm. I've also included a TABLE_GRIP that can be added to any…
ı designed looks like twin towers fish tank ornament and pretty good design ı think.
The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
You don't need supports maybe under the mailbox. All models can be printed directly except the selfedit this model is made of individual parts so you can do anything you want.
Tired of not having paper towel easily accessible when cleaning up after your baby? Me too, so I made this. Super easy to print, no supports needed. I used a 40% tri-hexagon infill and 3 walls and it's plenty strong enough. The version in…
This filament spool holder is designed specifically for the Prusa MINI and mounts directly on top of the Z tower. It uses a fixed axle that runs through the center of the spool, preventing the common issue of spools falling off the stock…
My first attempt at an insert - its taken me quite a few iterations and measuring and re-measuring but I got there in the end! This is definitely a release candidate rather than final version. I just wanted to get this up there. Made with…
This Sturdy Paper Roll Holder can be mounted on a Wall or mounted on a Table. OnShape Link:…
Remix to hold up to 10 Dreamcast VMU.
This part was designed as a replacement for one of the two tow hitch cover locks on the Tesla model S. The original part is fragile and snaps easily, so in case that happens to you you can print it using this model. This was designed in…
This is a simple dice tower with 2 horizontal bounces and one vertical roll into a dice tray
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. The Bitexco building is 65.5mm tall, equivalent to a scale of 1/4000 in real life, and can be used for architectural projects or dioramas.
Passend für ca. 30 x 30mm Vierkant und Ausschnitt für Durchmesser ca 23mm Suitable for approx. 30 x 30mm square and cut-out for diameter approx. 23mm - Besonders zu empfehlen, wegen Stabilität und Temperatur: Filament: PETG Perimeter: 4…
Devín Castle is one of the oldest castles in Slovakia. The first mention of the castle in written sources was quite possibly in 864, when Louis the German besieged Prince Rastislav of Moravia in one of the frequent wars between the Franks…
Simple tower to store wide mouth rings; if you print without top and bottom layers and with a 2d honeycomb infill you get a nice pattern through the model as shown in the picture. Note: the filet at the bottom of the tower needs finer…
This large, bright red heart-loving tow hitch cover is sure to bring a smile to anyone laying eyes on it! Help spread the LOVE ! Easily customize the tow hitch to your liking by loading the tow_hitch_heart.3mf file and replacing the heart…
This coat of arms of the city of Katowice was designed as a tactile graphics for blind people, but can obviously find far more applications. How to print No rafts or supports needed. Print in any scale.
I was tired of the towels always being thrown onto the shelf, so I designed a hook on which you can easily hang the towels. The hooks can be attached to the handles very easily and without damaging them. If necessary, these can also be…
🇺🇸 Welcome to Vermont, USA! St. Johnsbury Academy (SJA) is a private school located in St. Johnsbury, Vermont, in the United States. The academy enrolls students in grades 9-12. It was founded in 1842 by Erastus, Thaddeus, and Joseph…
You should use supports under the tip of the tower if you want a perfect print. All models can be printed except the selfedit this model is made of individual parts so you can do anything you want.
This is my design for a stackable letter tower that can (and should) be illuminated from the inside. It is a two-color print, with one color forming the shell (or frame) and the second—preferably transparent—creating the fill. The set…
A stack of prisms where all the edges are equal.
For mounting the Brace on the chassis you have to use the two suplied M3*10mm countersunkscrews from the shock tower and two additonal M3*6mm countersunkscrews to mount the brace onto the shocktower.
Easy to print Papertowelholder. Fill it with Quarzsand to make it more stable. Link to OnShape Designfile. https://cad.onshape.com/documents/0da628988b15896b06aec850/w/2c11edd42c79f526ad2b7906/e/efb01525541e31ab041f3121 printed with PLA,…
A tower of prisms where the circumradius of each is the inradius of the prism below it. Prism heights are equal to the edges of the decagon at the bottom.
I don't like to do anything in plastic. My favorite material is wood but 3d printing is the perfect add-on to that. So I designed one holder for workshop towels and kitchen paper towels (core ~40mm) for wood (if you are interested in the…
Includes the “click” ridge, so things are perfectly lined up on the rack when in use, and two support legs that are designed to be bent and snapped off before use, to allow for better bed adhesion. Uploaded .stl, since the .3mf caused…
The Remote Learning Tower allows remote homework with a smartphone and wifi/mobile data. Executive summary: The Remote Learning Tower hold a smartphone that will stream like a videocall the desk area from above. With the loudspeaker…
I made this calibration tower right after I switched to klipper. And boy it makes a difference. It has a little overhang and distance test (0.2mm) too. Dimensions: 20/30x40/50x60mm. Printed on an Ender 5+, BTT SKR E3MINI V3.0, Klipper,…
3 RACING rear shock tower for MINI MG 1/10. Printed 0.15 in PTEG and 90% infill. 3 Racing mariposa trasera para sakura MINI MG 1/10. Imprimido a 0.15mm, relleno 90% en PTEG.
Hey, ich brauchte für meine Sechskant Schlüssel etwas damit dies nicht mehr so auf dem Tisch rumliegen also Turm gezeichnet gedruckt mit einer 0,4 nozzle in 0,25 structural und 15 Prozent infill, hab spass beim druck.…
Medals for the PRS 2026 competitions held in Slavetown
The STYLE COLLECTION HOME Towel Loop Clip is the perfect stylish and smart solution for beautifully hanging and displaying your bathroom and kitchen towels —all without damage. Designed for ease of use and elegance , this innovative clip…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
The Eiffel Tower with a little wider rod rails to print in small size on SLA printers. Remixed from https://www.thingiverse.com/thing:912478 See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF…
This dice tower with a castle motif includes a beautiful wrap-around spiral stair case, allowing the dice to bump and roll with randomness as they descend. The tower's top provides a funnel shape that allows for the dice to be easily…
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
A detailed dice tower that can serve as a decorative diorama on its own. Prints completely support free. Happy printing! :) You're welcome to visit our shop at https://arsmoriendi3d.com/ Print instructions Print with your preferred…
Hi guys, designed this simple nice hexagonal paper towel holder for my kitchen. Four versions available: with holes - you want to screw in the holder to the bottom of your cabinet for example without holes - you want to stick it to the…
Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…
Smash! If you like my models, please like, share, download, make and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes…
From the well received GREATEST Towel Hooks now an improved Version 2! With improved attachment area, greater holding strength and fillet corners. Update 13/09/2025: Added versions with screw mounting holes These towel hooks are an…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
Intro Its the Eiffeltower not much to say other than this model can be printed with your glorified gluegun aka FDM printer like a Ender oder Prusa. ko-fi.com/yell3d Printsetting Scale its 220mm, 240mm upscale show be fine Layerheight 0.2…
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…
